Any approach to adjust the volumn level?

Similar Questions

• How can I adjust the audio level to 85 dB in first export?

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  AnjuBacker wrote:

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  85 dB is a level of calibration of the monitor. Use a meter of SPL (C-weighted/slow) with pink noise to perform this task. It is not something that is defined during mixing or exit. Loudness Radar is a sound level meter software. It includes templates and Visual representations to program Loudness, short temporary term Loudness, Loudness and Loudness Range (LRA). There is also an indicator of True Peak exceeded. Add this at the end of you point out the string for a precise measurement of your mix. Note to determine an exact indication of the program Loudness, the audio segment must be measured in its entirety.

  -paul.

  @produceNewMedia

• Auto micro adjusts the input level

  Hi all

  I tried this several times and never seem to be able to find an answer that works...  When I talk in my microphone on my macbook pro, it adjusts permanently the input levels, so in mid-sentence volume varies (always at peak).  It is extremely annoying, and there seems no obvious way to a certain volume of recording.  Any help here?

  Thank you!

  Hi Aprilstern,

  I understand that the input of your Mac's built-in microphone volume seems to be fluctuating when you save. In this case, if you use Mac OS X Yosemite or earlier, you may want to turn off noise reduction in system preferences > Sound > entry.

  OS X Yosemite: adjust the settings of your computer's audio input

  Kind regards.

• Adjust the audio level through an entire project

  Captivate v5.5

  I created a project with a narration for slide added during 2-3 days.

  Now, I want to ensure that the level of my narration slide by slide is consistent throughout the project.

  If I select 'Normalise' the project/adjust the Audio Volume / change what (if any) should I do with the Volume on the left slider?

  Would you recommend this as the best option?

  Is there a better option?

  Thank you

  Noel

  Noel,.

  "Normalize" audio is usually done to equalize the difference in volume between audio on different slides in your project.  So if you have noticed that some slides were significantly stronger or softer than others, you can use standards to get them all sounding more or less the same.

  I don't know if you have the following ELS or just Captivate, but his blog post has a brief overview of how to perform changes on the audio through several Captivate slides using Adobe Audition.  You can use other audio editors in a similar way to a certain extent, but back and forth between Captivate and audio editors who belong to the ELS is generally higher.

• Can adjust the audio levels with a single clip

  Very simple question that drives me crazy.  Just before I post, I'm a complete to this noob please go easy on me.

  I'm editing a podcast.  It is a clip, a track in first pro.  My sound levels varies between-3 and - 12db through recording due to parts where I speak louder and quieter.   I need to balance a little better, to make the quiet parts louder.

  I don't know how to do this outside the insertion of keyframes volume level in the clip, which is slow and manual and takes forever.

  Every search I do to normalize levels is all about several clips and by adjusting the maximum peak in the same, that will not help me.

  Thanks in advance!

  Adobe Audition is a speech Volume Leveler you might want to check.

• Sound engineer freezes when I try to adjust the audio levels

  I have Windows 7, and occasionally (1 of 5) when I start my computer, the volume mixer will freeze everytime I try to adjust the volume until I restart the computer. When I try ending the process via Task Manager > administrative tools > Services > Windows Audio, I get the error "the program has not responded in time."

  I have no sound card, my active audio device is my Logitech G930 USB headset. When I try to turn on/off the headset, nothing happens. The only way to solve the problem is to restart my PC.

  Is there a solution for this?

  Hello

  Did you change to the computer?

  Method 1:

  I suggest you to see link and check.

  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I also suggest that you run the Microsoft fixit tool and check.

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  See also:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Adjust the Audio level of the track and a selection of Clips

  Hello

  I have trouble finding ways to address overall levels of a group of clips, or an entire track in the first. Pointers or links would be appreciated.

  Thank you!

  Select all, then use [or] shortcuts.

• Any approach other than the use of a function

  Hello
  
  I use Oracle 10.2.0.4.0 version
  
  Create tabel
  

  CREATE TABLE TEST
  (  GROUP_NUM        CHAR(8 BYTE),
     DIVISION_NUM     CHAR(5 BYTE),
     DIVNAME          CHAR(40 BYTE));

  Insert a table
  

    insert into test (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('123','0001','deltatrans');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('123','0002','deltatrans1');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('123','0003','deltatrans3');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('456','0001','transatlan');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('456','0002','transatlan1');
    insert into test  (GROUP_NUM,DIVISION_NUM,DIVNAME) values ('456','0003','transatlan2');

  Select * from test

  group_num division_num  divname
  123          0001      deltatrans                              
  123          0002      deltatrans1                             
  123          0003      deltatrans3                             
  456          0001      transatlan                              
  456          0002      transatlan1                             
  456          0003      transatlan2                             

  I need the output voltage

  group_num  division_num   divname                                       grpname
  123          0001      deltatrans                                   deltatrans                              
  123          0002      deltatrans1                                  deltatrans                              
  123          0003      deltatrans3                                  deltatrans                              
  456          0001      transatlan                                   transatlan                              
  456          0002      transatlan1                                  transatlan                              
  456          0003      transatlan2                                  transatlan              

  The grpname column should display the value in the divname column where the divison_num is the minimum for this group.
  
  Currently I use a function to do
  
  Function:
  

  CREATE OR REPLACE FUNCTION
                                  fn_testgpname (
                         GPNO IN VARCHAR2  )
      RETURN  varchar2
      AS
  RESULT varchar2(40);
  BEGIN
  select divname into result  from test
  where group_num = gpno
  and division_num = (select min(division_num) from test where group_num = gpno);
  RETURN RESULT;
  EXCEPTION WHEN NO_DATA_FOUND THEN
          DBMS_OUTPUT.PUT_LINE (SQLERRM);
            DBMS_OUTPUT.PUT_LINE (RESULT);
            RETURN NULL;
            WHEN OTHERS THEN
            DBMS_OUTPUT.PUT_LINE (SQLERRM);
            DBMS_OUTPUT.PUT_LINE (RESULT);
            RETURN NULL;
  END;
  /

  I'm going to call the function in the qry as
  

  SELECT GROUP_NUM,DIVISION_NUM,DIVNAME,fn_testgpname(group_num) grpname FROM TEST

  Also, I noticed when I create a table with the above statement as

  create table testing as SELECT GROUP_NUM,DIVISION_NUM,DIVNAME,fn_testgpname(group_num)grpname FROM TEST

  the structure of the table is like this

  CREATE TABLE TESTING
  (
    GROUP_NUM     CHAR(8 BYTE),
    DIVISION_NUM  CHAR(5 BYTE),
    DIVNAME       CHAR(40 BYTE),
    GRPNAME       VARCHAR2(4000 BYTE)
  )

  Why did the grpname returned as varchar2 (4000 byte)?
  
  
  Thanks in advance.

  My response above.

  >
  The reason why your table is created with varchar2 (4000), it's that your function returns a varchar2. If oracle picksup default maximum limits for varchar2 and creates the column.

  Limit Max for varchar2 is 4000.

  >

  The reason why he picks up the maximum limit is that... Your function can return a string up to 4000 bytes. Thus, it creates the column with 4000.

  If you want with 40 even you can convert,

  CREATE TABLE test1 AS
  SELECT group_num,
         division_num,
         divname,
         CAST(first_value (divname) OVER (PARTITION BY group_num ORDER BY division_num) AS char(40)) AS grpname
    FROM TEST;
  

  G.

• How to adjust the volume to specific levels by using the batch file?

  I use Windows Media player and want to adjust the volume level automatically using planning.

  Anyone have any suggestions on how to set the volume level by using the batch file?

  such that 0 is mute and 10 max, I want to set the volume 4

  Thanks in advance for your suggestions

  Eric

  Hi Eric,.

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• How to set the entry level of voiceover?

  Hello

  I use Soundbooth to record my voiceover work. My equipment includes a MacBook Pro and a Samson CO1U microphone. It doesn't seem to be anywhere to adjust the input level (record). There is a setting of the slider in the Audio (Soundbooth) dialog box that you can access when you press record, but the slider itself is not accessible (i.e. When you try to drag, it is locked, and nothing happens). Anyone have any ideas? I would really appreciate it!

  Thank you

  Vixter

  Sounds good!  I'll have to ask one of those for the laboratory.

  Have a nice day

• HP OfficeJet 3830: Printer HP Office Jet 3830 print labels? I can't find any option to change the thickness of the p.

  I need to print labels, sometimes one and sometimes pages of them.  When I put a sheet of labels in the Office Jet 3830 (in Word 16) the stuck sheet and would not go through the printer.  I can't find any way to adjust the thickness of the paper, not something thick like a page of blank labels.  If the printer has this function, how can I activate it?

  @vjdetling

  Printer:

  Range of all-in-one printers, HP OfficeJet 3830

  Full software features:

  File name: OJ3830_72.exe

  The specificationsindicate that the printer software can handle one type of media (paper type), titled "letter of card Index".

  Set your printing preferences / Print Preview to include

  • Media type 'Index Card letter'
  • Paper size: letter

  If includes it the list of media type, you can also try 'Matte of the Brochure' (wording varies)

  Help, suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• BlackBerry leap speaker crackling and caller voice level is so low even set at the highest level.

  New 1 day old phone and the speaker is crackling during the speakerphone mode or when you adjust the volume level of notification. In addition the audio level of voice calls is barely audible. It's exactly like my old Z10. Come on blackberry? !!! You guys are really all QA before packinging your products or is - this new Bond is a repackaging of exccess and components of the Z10? It's my 3rd 10 blackberry device. I'm running out of excuses to continue to support the guy.

  I returned my jump today and bought another classic. In addition to the problems I mentioned, I also found this mixture will connect to jump at all.  With this new specific classic speaker working, no sound of cracklng. Everthing works. 10.3.1.1865 firmware version

• Cannot adjust the levels after the addition of noise to a layer.

  Hello

  I can't set the levels on a layer after that I previously added noise to it. Basically, I am trying to add a simple snow storm effect to a painting, that I am currently working.

  As I do normally is: create a new layer, then fill it black Uni, after that, I go to Filters > noise > add noise, then I add about 150% noise and Monochrome check, press ok, after I have go to image > adjustments > levels and adjust it so it leaves only a few white spots and then I press ok , but this time it nothing happens after I press ok in the window level and the image remains the same. I have done before in earlier versions of photoshop, but it does not work this time for some reason, I think it could possibly be a recent bug. Any help will be appreciated, thanks.

  Here is the System Info:

  Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 3392 MHz

  Built-in memory: 8175 MB

  Free memory: 4787 MB

  Memory available to Photoshop: 7236 MB

  Memory used by Photoshop: 60%

  Tile image size: 128K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  Video card provider: NVIDIA Corporation

  Renderer video card: GeForce GT 520/PCI/SSE2

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 768, right: 1366

  Video card: 1

  Graphics card: NVIDIA GeForce GT 520

  OpenCL unavailable

  Driver version: 8.17.12.6785

  Driver date: 20110323000000.000000 - 000

  Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

  Video mode: 1366 x 768 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce GT 520

  Memory: 1024 MB

  Texture size video Rect: 16384

  Serial number: 92298814468164638664

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\Owner\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  1.35 T, 872,4 G free starter

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2012/01/18-15: 07: 40 66,492997 66.492997

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/02/09-16: 00: 02 4.0.93 66.496052

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 6.0.0.1654 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/01/18-15: 07: 40 66,492997 66.492997

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/01/18-15: 07:40 66,492997 66.492997

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/01/18-15: 07: 40 66,492997 66.492997

  BIBUtils.dll BIBUtils 2012/01/18-15: 07: 40 66,492997 66.492997

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.0.5.19287 2.0.5.19287

  CoolType.dll CoolType 2012/01/18-15: 07: 40 66,492997 66.492997

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 10.0

  LogSession.dll LogSession 2.1.2.1640

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  SMA 3.11x01

  Angular Strokes 13.0

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.1

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Clouds of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  COLLADA 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Embed watermark 4.0

  Entropy 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Extrude 13.0

  FastCore routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 maximum (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Measure Core 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 median (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mezzotint 13.0

  Minimum 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Neon 13.0

  Paper notes 13.0

  NTSC colors 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photocopy 13.0

  Engine 3D Photoshop 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photo filter package 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Pinch 13.0

  Pixar 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Range 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  ScriptingSupport 13.0

  Shear 13.0

  Asymmetry 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Sumi-e 13.0

  Summons 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  U3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Draft of 13.0

  Vanishing point 13.0

  Variance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Variations of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  WIA support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Wind 13.0

  Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Zig - zag 13.0

  Plug-ins option and the third: NONE

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  The blur of noise before using the levels settings?

  Filter > blur > blur more

• How can I adjust the height of the image on bootstrap slider to adapt to any screen?

  How can I adjust the height of the image on bootstrap slider to adapt to any screen? The width it is responsive but the height doesn't correspond only not to the screens.

  Please help me

  This will help Bootstrap carousel 100 Height and Width. Smirnovs Arturs

• fan stays on too long and the battery level decreases rapidly: any problem identified?

  Fan stays on too long and the battery level decreases rapidly: all identified cause problem or possible?

  MacBook Air mid-2013

  OS 10.11.13

  Processor 1.7 GHz Intel Core i7

  8 GB of DDR3 memory at 1600 MHz

  Thank you, Paolo

  Hi Paskowski,

  Can you give us a little more information about your problem?  What applications or processes are you using when you encounter the problem with your fan and battery?  The activity monitor application can provide you with some basic information.

  Use the monitor activity on your Mac.

  The resources below provides general information on how optimize the battery life and troubleshoot the battery on your MacBook Air.

  On batteries for laptops Mac

  Take care