Auto micro adjusts the input level

Similar Questions

• How can I adjust the audio level to 85 dB in first export?

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  AnjuBacker wrote:

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  85 dB is a level of calibration of the monitor. Use a meter of SPL (C-weighted/slow) with pink noise to perform this task. It is not something that is defined during mixing or exit. Loudness Radar is a sound level meter software. It includes templates and Visual representations to program Loudness, short temporary term Loudness, Loudness and Loudness Range (LRA). There is also an indicator of True Peak exceeded. Add this at the end of you point out the string for a precise measurement of your mix. Note to determine an exact indication of the program Loudness, the audio segment must be measured in its entirety.

  -paul.

  @produceNewMedia

• Any approach to adjust the volumn level?

  When I watch Youtube videos, I would adjust levels volumn due to the sound quality of the video clip, but whenever I listen to my music using Windows Media Player, I have to tune down every time, and I need to make several times of all the days for these tasks. Anyone has any suggestions on how to set my volumn on any approach levels? so I need to manually set it down.

  For example:

  (1) reset volumn level each time the reboot window

  (2) creating a batch file for restore volumn level based on the expected period

  (3) adjust the volumn volume specific music files, whenever I play it, the level of volumn will automatically set at specific level.

  4) ...

  Thanks in advance for your suggestions

  Not under XP.

  On W7, you can adjust the sound on a per program basis IIRC.

  This may be of interest to you:

  http://www.top4download.com/free-music-volume/

  Variation: try Googling for the software.

  See you soon,.

  Jerry

• Can adjust the audio levels with a single clip

  Very simple question that drives me crazy.  Just before I post, I'm a complete to this noob please go easy on me.

  I'm editing a podcast.  It is a clip, a track in first pro.  My sound levels varies between-3 and - 12db through recording due to parts where I speak louder and quieter.   I need to balance a little better, to make the quiet parts louder.

  I don't know how to do this outside the insertion of keyframes volume level in the clip, which is slow and manual and takes forever.

  Every search I do to normalize levels is all about several clips and by adjusting the maximum peak in the same, that will not help me.

  Thanks in advance!

  Adobe Audition is a speech Volume Leveler you might want to check.

• Reduce the input level

  Hi, I'm trying to record a radio show that we do.  I connected to a USB sound card main mix and can see the hearing levels, but they are far too high. I want to be able to use the mixer and just go in the orange LEDs so want to reduce the level of entry into hearing, rather than reducing the fader master on the desktop.  I tried to use the effects Rack and make one - Cut of 6db.  While this reduces the levels on the great indicator of level, it does nothing for the little meters on the track or level which is actually registered.  How can I reduce the level which is registered?

  Ben

  As the so-called ryclark, hearing simply records what is called by your interface - input levels must be adapted to the interface, so that you use here is the crucial question.

  However, I will go a little further and say that if your levels are as high as you say, you may well be overloading the entry to the interface itself with distortion occurring before the signal happens anywhere near hearing.

  Just a hunch, but many drummers have their main outputs on XLR for the level of the line, but many interfaces use XLR just for the microphone level and need a quarter inch TRS jack for level line as a mix-simple to fix with the appropriate cable.   Any chance that this could be happening?

  In the contrary case, we need the details of your mixer, interface and how you have connected.

• Adjust the audio level through an entire project

  Captivate v5.5

  I created a project with a narration for slide added during 2-3 days.

  Now, I want to ensure that the level of my narration slide by slide is consistent throughout the project.

  If I select 'Normalise' the project/adjust the Audio Volume / change what (if any) should I do with the Volume on the left slider?

  Would you recommend this as the best option?

  Is there a better option?

  Thank you

  Noel

  Noel,.

  "Normalize" audio is usually done to equalize the difference in volume between audio on different slides in your project.  So if you have noticed that some slides were significantly stronger or softer than others, you can use standards to get them all sounding more or less the same.

  I don't know if you have the following ELS or just Captivate, but his blog post has a brief overview of how to perform changes on the audio through several Captivate slides using Adobe Audition.  You can use other audio editors in a similar way to a certain extent, but back and forth between Captivate and audio editors who belong to the ELS is generally higher.

• Sound engineer freezes when I try to adjust the audio levels

  I have Windows 7, and occasionally (1 of 5) when I start my computer, the volume mixer will freeze everytime I try to adjust the volume until I restart the computer. When I try ending the process via Task Manager > administrative tools > Services > Windows Audio, I get the error "the program has not responded in time."

  I have no sound card, my active audio device is my Logitech G930 USB headset. When I try to turn on/off the headset, nothing happens. The only way to solve the problem is to restart my PC.

  Is there a solution for this?

  Hello

  Did you change to the computer?

  Method 1:

  I suggest you to see link and check.

  Open the troubleshooting of Audio playback
  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 2:

  I also suggest that you run the Microsoft fixit tool and check.

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  See also:

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Adjust the input box text field on the form with Dreamweaver Bootstrap CC

  I'm building my first form contact us in Dreamweaver CC using bootstrap.

  I generated the form using the Insert > function form.

  However, I am not able to adjust the height of the text fields. Some need to lodge a comment like than others.

  I tried adding a CLASS, but have not hit on the answer...

  ANYONE?

  Also, how do you code the button send to an email address.

  Thanks in advance,

  MaryAnn

  Instead of using...

  Insert > form > text

  use...

  Insert > form > text box (to halfway through the Insert menu)

  To get the form to work, ask your host if they have a form to email script, you can use it on their server. Most is. If they aren't, search "form - language supported - email script" in Google. Make sure that the language on the server side you choose is supported on your server.

• Adjust the Audio level of the track and a selection of Clips

  Hello

  I have trouble finding ways to address overall levels of a group of clips, or an entire track in the first. Pointers or links would be appreciated.

  Thank you!

  Select all, then use [or] shortcuts.

• How to set the entry level of voiceover?

  Hello

  I use Soundbooth to record my voiceover work. My equipment includes a MacBook Pro and a Samson CO1U microphone. It doesn't seem to be anywhere to adjust the input level (record). There is a setting of the slider in the Audio (Soundbooth) dialog box that you can access when you press record, but the slider itself is not accessible (i.e. When you try to drag, it is locked, and nothing happens). Anyone have any ideas? I would really appreciate it!

  Thank you

  Vixter

  Sounds good!  I'll have to ask one of those for the laboratory.

  Have a nice day

• How to adjust the volume to specific levels by using the batch file?

  I use Windows Media player and want to adjust the volume level automatically using planning.

  Anyone have any suggestions on how to set the volume level by using the batch file?

  such that 0 is mute and 10 max, I want to set the volume 4

  Thanks in advance for your suggestions

  Eric

  Hi Eric,.

  The question you have posted is better suited to the MSDN forums. You can ask your question in the help link.

  http://social.msdn.Microsoft.com/forums/en-us/categories

  Hope the helps of information.

• BlackBerry leap speaker crackling and caller voice level is so low even set at the highest level.

  New 1 day old phone and the speaker is crackling during the speakerphone mode or when you adjust the volume level of notification. In addition the audio level of voice calls is barely audible. It's exactly like my old Z10. Come on blackberry? !!! You guys are really all QA before packinging your products or is - this new Bond is a repackaging of exccess and components of the Z10? It's my 3rd 10 blackberry device. I'm running out of excuses to continue to support the guy.

  I returned my jump today and bought another classic. In addition to the problems I mentioned, I also found this mixture will connect to jump at all.  With this new specific classic speaker working, no sound of cracklng. Everthing works. 10.3.1.1865 firmware version

• DAQmx: Analog input directly to the analog output at the hardware level

  Hi all

  I searched for a while, but I couldn't find any suitable implementation for what I'm trying to do.  A person where I work introduced me to an interesting challenge.  Is there a way to set up a DAQmx task (or set up otherwise an MIO Board) to route an entry directly to an output to the analog analog hardware level?  You may be thinking, "why the hell would you do?  To reduce the electrical complexity, a colleague would like to concurrently read an entry while 'reproduction' of its signal on analog analog output.  I know that I can easily accomplish this while the buffering by the PC, but they are interested in ensuring that the output signal is also similar to the input at the level of KHz signal, by introducing a minimal difference in phase (shift buffering of the PC).

  For the record, we have for most old maps of the E series here like the PCI-6070E (PCI-MIO-16-1).  I was first asked if it could be done through SCXI, but I figured I would start by asking about the MIO tips.

  This looks like a long shot, and I've never heard of someone at - he never did this, but I thought I'd ask to be sure!

  Thank you

  Jim

  Hi Jim,.

  With the help of our driver is not a means of generating data directly from the FIFO of AI, it must first pass through the software.  You can try the following code to the output of one of THE duplicate on the AO line to see what kind of delay you can imagine.  It is similar to your original with a few adjustments code:

  Use delayed output Version of avian influenza in DAQmx AO

  It seems you need to do, you might consider instead the search by using a voltage follower to isolate the Vout wine.

  Best regards

  John

• Cannot adjust the levels after the addition of noise to a layer.

  Hello

  I can't set the levels on a layer after that I previously added noise to it. Basically, I am trying to add a simple snow storm effect to a painting, that I am currently working.

  As I do normally is: create a new layer, then fill it black Uni, after that, I go to Filters > noise > add noise, then I add about 150% noise and Monochrome check, press ok, after I have go to image > adjustments > levels and adjust it so it leaves only a few white spots and then I press ok , but this time it nothing happens after I press ok in the window level and the image remains the same. I have done before in earlier versions of photoshop, but it does not work this time for some reason, I think it could possibly be a recent bug. Any help will be appreciated, thanks.

  Here is the System Info:

  Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

  Physical processor count: 4

  Number of logical processors: 8

  Processor speed: 3392 MHz

  Built-in memory: 8175 MB

  Free memory: 4787 MB

  Memory available to Photoshop: 7236 MB

  Memory used by Photoshop: 60%

  Tile image size: 128K

  Image cache level: 4

  OpenGL drawing: enabled.

  OpenGL drawing mode: Advanced

  OpenGL allows Normal Mode: true.

  OpenGL allows Advanced Mode: true.

  OpenGL allows old GPU: not detected.

  Video card provider: NVIDIA Corporation

  Renderer video card: GeForce GT 520/PCI/SSE2

  Display: 1

  View the limits: = top: 0, left: 0, bottom: 768, right: 1366

  Video card: 1

  Graphics card: NVIDIA GeForce GT 520

  OpenCL unavailable

  Driver version: 8.17.12.6785

  Driver date: 20110323000000.000000 - 000

  Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

  Video mode: 1366 x 768 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce GT 520

  Memory: 1024 MB

  Texture size video Rect: 16384

  Serial number: 92298814468164638664

  The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

  Temporary file path: C:\Users\Owner\AppData\Local\Temp\

  Zero Photoshop has async I/O active

  Scratch the volumes:

  1.35 T, 872,4 G free starter

  Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

  Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

  Additional Plug-ins folder: not defined

  Installed components:

  A3DLIBS.dll A3DLIB 9.2.0.112 dynamic link library

  ACE.dll ACE 2012/01/18-15: 07: 40 66,492997 66.492997

  adbeape.dll Adobe EPA 2012/01/25-10: 04:55 66.1025012 66.1025012

  AdobeLinguistic.dll Adobe linguistic Library 6.0.0

  AdobeOwl.dll Adobe Owl 2012/02/09-16: 00: 02 4.0.93 66.496052

  AdobePDFL.dll PDFL 2011/12/12-16: 12: 37 66,419471 66.419471

  Adobe AdobePIP.dll 6.0.0.1654 product improvement program

  AdobeXMP.dll Adobe XMP Core 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPFiles.dll Adobe XMP files 2012/02/06-14: 56:27 66,145661 66.145661

  AdobeXMPScript.dll Adobe XMP Script 2012/02/06-14: 56:27 66,145661 66.145661

  adobe_caps.dll Adobe CAPS 6,0,29,0

  AGM.dll AGA 2012/01/18-15: 07: 40 66,492997 66.492997

  ahclient.dll AdobeHelp Dynamic Link Library 1,7,0,56

  aif_core.dll AIF 3.0 62.490293

  aif_ocl.dll AIF 3.0 62.490293

  aif_ogl.dll AIF 3.0 62.490293

  Amtlib.dll AMTLib (64-bit) 6.0.0.75 (BuildVersion: 6.0;) Brand: Monday, January 16, 2012 18:00) 1.000000

  ARE.dll ARE 2012/01/18-15: 07:40 66,492997 66.492997

  Axe8sharedexpat.dll AXE8SharedExpat 2011/12/16-15: 10: 49 66,26830 66.26830

  AXEDOMCore.dll AXEDOMCore 2011/12/16-15: 10: 49 66,26830 66.26830

  Bib.dll BIB 2012/01/18-15: 07: 40 66,492997 66.492997

  BIBUtils.dll BIBUtils 2012/01/18-15: 07: 40 66,492997 66.492997

  boost_date_time.dll product DVA 6.0.0

  boost_signals.dll product DVA 6.0.0

  boost_system.dll product DVA 6.0.0

  boost_threads.dll product DVA 6.0.0

  CG.dll NVIDIA Cg Runtime 3.0.00007

  cgGL.dll NVIDIA Cg Runtime 3.0.00007

  Adobe CIT.dll CIT 2.0.5.19287 2.0.5.19287

  CoolType.dll CoolType 2012/01/18-15: 07: 40 66,492997 66.492997

  data_flow.dll AIF 3.0 62.490293

  dvaaudiodevice.dll product DVA 6.0.0

  dvacore.dll product DVA 6.0.0

  dvamarshal.dll product DVA 6.0.0

  dvamediatypes.dll product DVA 6.0.0

  dvaplayer.dll product DVA 6.0.0

  dvatransport.dll product DVA 6.0.0

  dvaunittesting.dll product DVA 6.0.0

  Dynamiclink.dll product DVA 6.0.0

  ExtendScript.dll ExtendScript 2011/12/14-15: 08: 46 66,490082 66.490082

  FileInfo.dll Adobe XMP FileInfo 2012/01/17-15: 11: 19 66,145433 66.145433

  filter_graph.dll AIF 3.0 62.490293

  hydra_filters.dll AIF 3.0 62.490293

  icucnv40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  icudt40.dll International Components for Unicode 2011/11/15-16: 30:22 Build gtlib_3.0.16615

  image_compiler.dll AIF 3.0 62.490293

  image_flow.dll AIF 3.0 62.490293

  image_runtime.dll AIF 3.0 62.490293

  JP2KLib.dll JP2KLib 2011/12/12-16: 12: 37 66,236923 66.236923

  libifcoremd.dll Intel Visual Fortran compiler 10.0 (A patch)

  libmmd.dll Intel(r) C Compiler, Intel C++ Compiler, Intel Fortran compiler 10.0

  LogSession.dll LogSession 2.1.2.1640

  mediacoreif.dll product DVA 6.0.0

  MPS.dll MPS-2012/02/03-10: 33: 13 66,495174 66.495174

  msvcm80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  msvcm90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  MSVCP100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  msvcp80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  MSVCP90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  msvcr100.dll Microsoft® Visual Studio® 2010 10.00.40219.1

  MSVCR80.dll Microsoft® Visual Studio® 2005 8.00.50727.6195

  Msvcr90.dll Microsoft® Visual Studio® 2008 9.00.30729.1

  pdfsettings.dll Adobe PDFSettings 1.04

  Adobe Photoshop CS6 CS6 Photoshop.dll

  Adobe Photoshop CS6 CS6 plugin.dll

  PlugPlug.dll Adobe CSXS branchezBranchez Dll Standard (64 bit) 3.0.0.383

  Adobe Photoshop CS6 CS6 PSArt.dll

  Adobe Photoshop CS6 CS6 PSViews.dll

  SCCore.dll ScCore 2011/12/14-15: 08: 46 66,490082 66.490082

  ScriptUIFlex.dll ScriptUIFlex 2011/12/14-15: 08: 46 66,490082 66.490082

  TBB.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  tbbmalloc.dll Intel Threading Building Blocks for Windows 3, 0, 2010, 0406

  TfFontMgr.dll FontMgr 9.3.0.113

  TfKernel.dll kernel 9.3.0.113

  Geom TFKGEOM.dll kernel 9.3.0.113

  Adobe TFUGEOM.dll, UGeom © 9.3.0.113

  updaternotifications.dll Adobe Updater Notifications Library 6.0.0.24 (BuildVersion: 1.0;) Brand: BUILDDATETIME) 6.0.0.24

  WRServices.dll WRServices Friday, January 27, 2012 13:22:12 build 0.17112 0,17112

  U3D writer 9.3.0.113 wu3d.dll

  Required plugins:

  3D Studio 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Accented edges 13.0

  Adaptive wide-angle 13.0

  SMA 3.11x01

  Angular Strokes 13.0

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Bas-relief 13.0

  BMP 13.0

  Camera Raw 7.1

  Chalk and charcoal 13.0

  Charcoal 13.0

  Chrome 13.0

  Cineon 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Clouds of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  COLLADA 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Halftone color 13.0

  Color pencil 13.0

  CompuServe GIF 13.0

  Pencil tale 13.0

  Craquelure 13.0

  Crop and straighten Photos 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Crop and straighten Photos filter 13.0

  Hatch: 13.0

  Crystallize 13.0

  Cutting 13.0

  Features dark 13.0

  Deinterlacing 13.0

  DICOM 13.0

  Difference clouds 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Glow 13.0

  Move 13.0

  Dry brush 13.0

  Eazel acquire 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Embed watermark 4.0

  Entropy 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Extrude 13.0

  FastCore routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fiber 13.0

  Film Grain 13.0

  Gallery of filters 13.0

  Flash 3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Fresco 13.0

  Glass 13.0

  Scarlet contours 13.0

  Google Earth 4 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Grain 13.0

  Graphic pen 13.0

  Halftone Pattern 13.0

  HDRMergeUI 13.0

  IFF Format 13.0

  Outlines in ink 13.0

  JPEG 2000 13.0

  Flattening coefficient 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Blur of the lens 13.0

  Correction of the lens 13.0

  Lens Flare 13.0

  Liquefy 13.0

  Operation of Matlab 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 maximum (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Average 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Measure Core 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  13.0 median (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mezzotint 13.0

  Minimum 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  MMXCore Routines 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Mosaic tiles 13.0

  Multiprocessor support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Neon 13.0

  Paper notes 13.0

  NTSC colors 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Ocean Ripple 13.0

  13.0 oil painting

  OpenEXR 13.0

  Paint Daubs 13.0

  13.0 palette knife

  Patchwork 13.0

  Paths to Illustrator 13.0

  PCX 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photocopy 13.0

  Engine 3D Photoshop 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Photo filter package 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Pinch 13.0

  Pixar 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Plaster 13.0

  Plastic wrap 13.0

  PNG 13.0

  Pointillism 13.0

  Polar coordinates 13.0

  Portable Bit map 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Poster edges 13.0

  Radial blur 13.0

  Radiance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Range 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Read watermark 4.0

  Crosslinking 13.0

  Ripple 13.0

  Rough Pastels 13.0

  Save for the Web 13.0

  ScriptingSupport 13.0

  Shear 13.0

  Asymmetry 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Smart Blur 13.0

  Smudge Stick 13.0

  Solarize 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Splash 13.0

  Spherize 13.0

  Sponge 13.0

  13.0 sprayed strokes

  Stained glass 13.0

  Stamp 13.0

  SD 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Sumi-e 13.0

  Summons 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Targa 13.0

  Texture veneer 13.0

  13.0 tiles

  Torn edges 13.0

  Watch twirl 13.0

  U3D 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Draft of 13.0

  Vanishing point 13.0

  Variance 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Variations of 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Water paper 13.0

  Watercolor of 13.0

  Wave 13.0

  Wavefront | OBJ 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  WIA support 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Wind 13.0

  Wireless Bitmap 13.0 (13.0 20120315.r.428 2012/03 / 15:21:00:00)

  Zig - zag 13.0

  Plug-ins option and the third: NONE

  Plug-ins that could not load: NONE

  Flash:

  Mini Bridge

  Kuler

  Install TWAIN devices: NONE

  The blur of noise before using the levels settings?

  Filter > blur > blur more

• The option "Auto Mask" of the in Camera Raw adjustment brush

  In Camera Raw, I saw the option "Auto mask" to the bottam of all the slides in the adjustment brush, what is this option for?

  When you pause your mouse in this option, it invites it's for the adjustment of the sensitivity of the edge of the brush, but I don't understand what that means exactly.

  Automatic mask is to limit the brush strokes to areas of the same color.  Suppose you had a picture with a red flower on green and brown background, and you want to use the adjustment brush to lighten red flower but does not lighten all of the background.  Automatic audit mask and the center of the cursor in the red as you STROKE the brush.  The mask must be limited to the red zone.  With off auto mask, brush strokes near the edge of the Red Wing could be feathered in the adjacent background area.