Any comments on the facility

Similar Questions

• Satellite P205 - hit ANY key on the keyboard opens the default browser

  Very strange problem with our Toshiba Satellite P205.
  Hit ANY key on the keyboard opens the default browser. For example, type a ten letter word ten browser windows opens. We have replaced the keyboard but the problem persists. Toshiba repair center suggested replacing the motherboard at $500 (which isn't on the cost of a new cell phone?).

  Works very well without any problem using an external keyboard.
  It came with Vista, but we installed XP with the same results. Also tried upgrading the Bios.

  * Water was spilled on this computer laptop previously.*
  * It is out of EMCO.*

  Is there maybe a registry tweak that can block the default browser to open this way?
  Anyone has any ideas on this one?

  There is a 'hard' switch just above the keyboard that opens the browser. I guess the connectors or printed circuits are corroded or damaged somehow so that any input on the keyboard also triggers this hard switch.

  Possibly a hack software to disable or block the button "Open browser" would solve the problem. How to turn off or reassign these hard buttons?

  Any help or ideas would be appreciated.

  > Toshiba repair center suggested replacing the motherboard at $500 (which isn't on the cost of a new cell phone?).
  Looks like you need to replace the motherboard if you do not want to use the computer's internal keyboard correctly
  You said that the water was reversed on this laptop previously, I think that's the reason why this keyboard problem happened

  > Is it may be a registry tweak that can block the default browser to open this way?
  It s unclear not for me if something like this is not possible, but in my opinion has nothing to do with the software (register), but with the hardware problem caused by spilled water
  You could try to reinstall the clean Windows operating system in order to check if this will help you
  But if the new facility doesn't help then you should use the external keyboard because I doubt a replacement of the motherboard would be an option due to high costs.

• Windows Media Player 11 - adding comments to the additional columns

  I used the column "Parental ratings" to put comments on the slopes, to add more information to allow the side to stars. But now Media Player will not accept comments more (all existing it stay there). Closing & re-opening WMP will not change that, nor made a stop and restart. Is it possible to allocate more memory to the comments (I guess that's the problem) or otherwise resolve this problem?

  Sometimes the songs come in WMP with sides half star values, for example 3½ stars, but they are not gold/yellow like those I add. Is it possible to add your own notes in half star increments?

  Exactly how you change the Parental ratings? Do you mean that you cannot change the Parental ratings for any song more, or that there is a limit to the amount of text you can enter into this area?

  I suggest that you use the custom 1 and custom 2 fields, these fields are more suited to the feedback from users.

  As far as I know, it is not possible to define your own ratings in half star increments.

  Tim Baets
  http://www.BM-productions.TK

• Why comments in the Details pane reduce a 30 MB tiff file size to 10 MB?

  I have a scan, which is a TIFF about 30 MB and I wrote a comment in the details pane to this topic.  When I saved the comment a window pops up with a message "Application of the properties as a reference" and then the file size has dropped to about two-thirds around 10 MB.

  What Vista did to my file?  And why?

  It's my pleasure - glad I could help him.  It is very interesting to transfer the file of 23 MB to Photoshop in Photoshop showing the original 86MB (which suggests that nothing actually happened to the file - it is just how Vista reports its size that seems to be wrong).  Maybe you've found a bug in the system - it wouldn't be the first.  It seems to me that you must ignore Vista file size reporting and information from Photoshop or any other programs that you use to work with images and TIFF files (not exactly the best location, but perhaps the only one available).

  If you want to pursue this, I would say the pictures and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in issues of picture will be more than happy to help you with your concerns.

  Thanks for the comments.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Comments on the system, I bought

  First of all, I tell myself I should layout, what I bought and what I added to the system.

  • Dell Studio 540
    • Core 2 Quad Q8300
    • ATI Radeon HD 3450
    • Onboard 5.1 (Realtek)
    • 8 GB RAM
    • 640 GB drive internal SATA
    • 640GO of external drive (which I moved from my old system)
    • LinkSys WMP600N (that I purchased separately)
    • DVD - RW
    • Keyboard Microsoft I had (4000 natural)
    • Mouse MS that I had (IntelliMouse Optical)
    • Vista Ultimate 64 bit SP1 (now upgraded to SP2)
  • Dell UltraSharp 20 "widescreen LCD (which I moved from my old system)
  • Reference Dell 20 "widescreen LCD with webcam and stereo microphones

  And now comments:

  1. The system scenario and the new monitor have a gloss finish.  I ended up concluding that it added nothing to me.  In fact, they show fingerprints easily.
  2. The glossy part apply to the display area of the new monitor too.  Unfortunately, it adds a lot of glare that does not have the older UltraSharp monitor.
  3. The webcam is a disaster.  Do not buy a Dell monitor just for the webcam.  In my case, my glasses can make things worse for the camera.  They reflect the light emitted by the good monitors the camera.  In any case, all I get is a bad dark image.  I tried to play around with the settings, but they did not help.
  4. The monitor, UltraSharp, while several years older, has more connections than the new video monitor.  I do not use them, but some people might still have a use for connectors S-video and composite.  Now, if the new monitor has a HDMI connector, that is not, it could compensate for this loss.  The irony is that my video card has only a single DVI connector.  I had to separately buy an HDMI cable to DVI to connect two monitors.
  5. The UltraSharp monitor has more settings in the database.  In fact, the new monitor has not.
  6. The new physical buttons on the monitor are smooth, but add not much more than the glitter.  Not what I paid for.
  7. I was really hoping a chassis without tool.  He did not.  In fact, this matter is the exact opposite of "no tool".
  8. For desktop computers, the location of the center of media player, in the middle of the front of the case, makes sense.  But I put it on the floor (on a trolley).  I don't see when I put my CompactFlash card or a USB device into the connectors.  So it would make sense that future designs would allow the Center to move up above the external and placed disks at an angle.  The center of the whole being a USB device, such a system could be plug-and-play.  Owner simply moves the Center to the desired location.  Once the Center is far from the default location, external drives move downwards to fill that spot and make room for the new location of the Center at the top.  The current Center makes room for a floppy drive, but why?  There is no floppy connector on the motherboard.  I you happen to have a card PCI IDE of my old system and an IDE LS - 120 (bed LS-120 120 MB disks, and standard floppy disks), but I don't see the trouble.  Most of the people do not have those.  So either kill the 3.5 "Bay or something similar.
  9. It's a good thing that the door in front of the media center can be left out.  I never close these doors.  In fact, I have simply removed their cases.
  10. I'm upset that a $1300 computer does not come with VT - x support.

  I hope that Dell will improve their products, based on my experience.

  Will Pittenger

  Thank you for the interesting comments on the PC.

  Bev.

• You try to run a report to view the comments of the CPU usage in vFoglight 6.0

  I am trying to run a report to view the comments of the CPU in vFoglight 6.0 usage, as I have a couple of VMs that seem to cause problems. I want to see what that levels of CPU for a while inside the virtual machines, but I only seem to be able to find the data in the reports for the use of the host processor.
  Any help is welcome

  If you want to use canned reports, which I think will work for what you ask, there is a pre-built for you.
  Home > reports > report > select the right model under all report templates ("using the virtual machine CPU and time ready" looks like the report that you want to")
  for the service should work the vCenter. This will send you all the hosts and any use of the VMs UC over what period you set (default is 4).

• How to add comments in the library module?

  I use LR 5.3 and in the library Module, metadata below is a comment field. However, in this area, it is said to "Selected service does not support comments.

  I can't find any information on how to use or how to "legitimately" comment on a photo.  I saw where it was suggested to add comments in the metadata fields, but this seems like a gross work around.  What is the purpose of the 'Comments' section in the library Module?

  What is the field "comments"? in the EXIF data?

• How to enable comments on the drive

  Hello

  The main uses I had Acrobat 9 was to allow comments on my Adobe Reader PDF files. Now, I've upgraded to Acrobat XI, and I couldn't find this option anywhere. I searched in the menus and the help, google it and wanted it here, does not.

  I understand that Adobe Reader XI has no need of this authorization to put comments on the files. But I still need to enable comments, for users who will get my files that don't have any Adobe Reader XI - especially of Linux users, given that the most recent reader for Linux is 9.5.5.

  Can someone help me? Am I missing something obvious?

  Thank you

  Paulo

  File - save as other - PDF Reader Extended - enable commenting on &

  Measurement...

• Are there any available for the Mac Pro 2013 SSD expansion?

  Are there any available for the Mac Pro 2013 SSD expansion?

  I would like to increase my 1 or 2 GB of storage internal if possible.

  https://eShop.MacSales.com/shop/SSD/OWC/Mac-Pro/2013

• Mine is Yahoo where POP is used. Tuberculosis is IMAP. I can receive and send emails, but when doing action on tuberculosis (Del or send) any reflection on the primary server

  Hello
  My e-mail address is Yahoo and Yahoo by default user POPs.
  I understood from your help file synchronization is only compatible with the IMAP e-mail provider
  I can receive and send emails from TB, but during action on tuberculosis (Del or send) any reflection on the primary server, even when doing the action on the main server (Del or send), no change on tuberculosis

  help from yahoo I managed to find the Setup for IMAP, but could not apply them on TB, TB already have Yahoo as POP in the configuration list
  Please your help on this

  Best regards
  Mohamad

  You cannot convert an existing account, but you can set up your Yahoo as IMAP account in parallel to the existing POP account. See
  http://KB.mozillazine.org/Convert_a_POP_account_to_a_IMAP_account

• How can I remove comments from the users and groups

  I have my in my users and groups in the system preferences a user snd invited another user

  How can I remove them

  Go to Preferences system-> users and groups, and then press the lock to allow you to change the settings. Then choose 'user comments' in the sidebar and uncheck "Allow clients to connect to this computer". This will not make this option disappear, but after that you will not be able to use the Guest user.

  «Respect for the other user, simply choose it in the sidebar and press on the '-' button.» Make sure that no one uses this user.

• How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  I NEED TO ACCESS MY BRPWSER ON DESKTOP FROM ANYWHERE IN THE WORLD... LIKE GMAIL...

  How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

  (Personal information removed by the moderator. Please read the Forum rules and guidelines - m)

  Sorry, that Mozilla does not offer a feature like that.

  Check out Xmarks. http://www.Xmarks.com/about/features/overview

• reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went

  reset the settings to the printer... still no print... more haven't added any items to the menu bar... they went bar & customize window title bar changed...

  By default Firefox will be "reduced to adjust." You who can disable in layout in a regular window or in print preview, but it's hard to call Preview in the window pop up in print, because the menu bar and the toolbar are removed. If it is a common problem, you can use a different add-on (!) which puts the print preview before printing and Page Setup on the shortcut menu.

  I have not used for some time, but I hope that it always works in Firefox 29: https://addons.mozilla.org/firefox/addon/printprint-preview/

• When I use the socks proxy in firefox, I can travel only and can not download any file from the internet.

  When I use the socks proxy in firefox, I can only navigate through internet and cannot download any file from the internet.

  I have no problem when using HTTP proxy servers and have no problem managing which connection to internet without proxy.

  I found this problem due to the integration of the browser evolved in the idm software, and when I turn this option off in idm problem will be solved

• will not display or allow comments on the RSS news

  I don't get the comments in the RSS news on Mozilla but can Internet Explore.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode without failure.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes