Any date picker to select a Date

Similar Questions

• my calendar from Windows gadget leave display any date

  original title: leave my Windows gadget calendar display any date, I tried the fix below, did not work.  Help!

  I have been using the calendar gadget on my desktop for a few years now.  I have Windows Vista and update of IE 9.  My clock gadget and the weather always both work, but now my calendar does not work.  It does not display the date... it is just empty.  I tried the fix was recommended and even restarted my computer, but none worked.  Help!

  Hello

  Have what troubleshooting measures you already tried?

  
  Step 1: you can try to restore the gadget.

  To do:
  a. right click on the sidebar on the right side of your screen.
  b. go to properties.
  c. at the bottom of the window you will find a tab to restore Gadgets installed with Windows, click it.

  This will restore it to the default setting. It has to become your Gadget weather work.

  
  Step 2:

  a. click on start-> all programs-> Accessories-> right-click "Command Prompt" and select "run as Administrator".
  b. type these commands one by one:

  Regsvr32 atl.dll
  Regsvr32 "%ProgramFiles%\Windows Sidebar\sbdrop.dll".
  Regsvr32 "%ProgramFiles%\Windows Sidebar\wlsrvc.dll".

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Can I upgrade level windows without losing any data and programs?

  I have a HP laptop with home premium pre-installed and think to upgrade to professional using microsoft retail CD purchased because the "Anytime Upgrade" program just show me an error during the upgrade, will I lose all data when the symbol or programs when you use the win 7 pro retail CD?

  Really, you must use Anytime Upgrade.

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• My reminderfox module missing after firefox update. How can I reinstall without losing any data?

  my module of Fox reminder disappeared after updating firefox. I can install this add-on again, but then I lose all the data that existed before the update. How can I reinstall without losing any data?

  Back up your ReminderFox data before reinstalling. This is stored in a separate file in the folder of the parameters active Firefox (also known as your Firefox profile folder). You can find this file by using a button on the page of troubleshooting information. Either:

  • Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table, click on "view file". Look for a folder named reminderfox and copy it somewhere safe.

  More information: http://www.reminderfox.org/documentation-faq-troubleshooting/#r5

• How can I sync my iPhone and Apple Watch to a new computer without losing any data?

  I'm about to fix my laptop and I need to change my iTunes on PC. But I don't want to lose any data on the health of the Apple Watch.

  Copy of the data of all iTunes from the laptop to PC will have all my apps and music. But what about the backup? They are encrypted to record data on the health of my Apple Watch.

  Can I copy and paste the encrypted data backup iTunes?

  Please I need help.

  Move an encrypted backup from one computer to another value may not work, but as long as no device should be restored now you should be able to migrate from the library to the new computer and then take a fresh encrypted backup of each device.

  Migrate a library iTunes from one computer to another

  These are two approaches that work normally to move an existing library to a new computer.

  Method 1

  1. Save the library with this trick of the user.
  2. Remove the old computer if you no longer wish to access content protected on it.
  3. Restore the backup to your new computer by using the same tool used to back it up.
  4. Keep your current backup in the future.

  Method 2

  Connect the two computers on the same network. Share your old computer < user music > folder and copy the folder of library full iTunes in the < user music > on the new folder. Yet once, remove the old computer so is no longer necessary.

  These two methods should give the new computer, a clone of the library work which was on the former. What about iTunes is it is still the 'home' for your devices library you should not have problems with iTunes will erase and reload.

  I recommend method 1 because it establishes a current backup for your library.

  Note If you have iOS devices and that you have not reached your contacts and calendar all in all items, then you need to create a dummy entry in your new profile and iTunes expected to merge existing data from the device.

  If your media folder has been separated in the main folder of iTunes, you may need to do some preparatory work to make it easier to move. See make a library of portable split.

  If you are in the unfortunate position where you're able to access your original library or a backup and then see recover your iTunes from your iPod or an iOS device to get tips on how to configure your devices with a new library with the maximum preservation of data.

  TT2

• I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  I forgot my password and got my iphone disabled after several attempts. its display to connect to itunes, but I am unable to connect to itunes too. How can I unlock my phone without losing any data? Help, please

  In short - you can't

  IF you have a computer with iTunes on which you did a prior backup - the phone will be recognized and iTunes offer todo backup before it clears your device - that - except if you know the access code the content cannot be saved

• Tecra A4: Matsu * a s uj - 831 - cannot access any data CD

  Hello

  I have a new toshiba tecra a4
  I have the combo dvd: Matsu * a UJ - 831S
  and I have the following in less than 4 months of use problem:
  Since yesterday I can not access any data cd, audio CD are ok, so on DVD.
  When I go to my computer and click on the drive I get the message "D:\ not accessible incorrect function".

  I tried to uninstall the software, etc. But nothing.
  I tried to boot from the dvd from Toshiba, is the beginning, I tried to boot from cd does not start.
  so the problem is hardware
  I downloaded the firmware (Loder_831_V102.exe), but he said: "the target disk is not connected" and I can't upgrade.

  So what is the problem, can it be fixed?

  Hello

  It's not easy to tell how to solve this problem.
  But first of all, you can try to remove this device in the Device Manager.
  After startup, the operating system should recognize the drive again.

  If this procedure doesn't help, well it could be a disk failure.
  If the warranty is valid, you should ask the ASP for a replacement.

  Good bye

• Format without losing any data?

  I removed the hd to my external hard drive enclosure because the usb connection broke.

  I put the hd in my pc and I format. Is it possible to do that without losing data?

  Hello

  1. what operating system is installed on the computer?

  I suggest you connect the hard disk to another computer and try to save the data, then perform Format.

  The format will result in the loss of data; It is not possible to format without losing any data. You must back up the data before performing format.

• can upgrade you to vista 64 ultimate vista ultimate 32 bit without losing any data?

  can upgrade you to vista 64 ultimate vista ultimate 32 bit without losing any data? Compatible with 64-bit PC and I have 64-bit installation disc and want to update

  Hello

  Laughing out loud

  32-bit to 64-bit is not an upgrade path.

  To go from 32 bit to 64 bit, you must do a clean install.

  See you soon.

• Files corrupted win 7; can I fix it without losing any data?

  I have a HPp7 - 1137c.  6gig ram.  Win7.  I corrupted files win 7; can I fix it without losing any data?

  Hello:

  I don't know why some programs that you have installed have disappeared after the repair process.

  Yes, the method of reinstalling windows without losing files is correct as long as you don't let windows not delete or format the partition.

  What happens is that it creates a Windows.old folder and you can copy all your files from windows.old to the new facility.

  However, you will need to reinstall all your programs, because there will be only a simplified version of Windows 7 installed with no program.

  This is the method I use (I still have my files backed up just in case), but it's so easy to go in the windows.old folder and transfer my files and internet favorite folders from the windows.old folder to the new installation of windows.

• With the help of a wild card for any date

  I would like to have a contact to enter a campaign, once one of the fields from the custom contact form has ANY date in it, not only a date specific.  Is this possible?

  

  You can also try the Null not exactly and see if it works.

• Is it possible to clone an instance without any data?

  Hello
  Is it possible to clone an instance without any data?
  Say I want to clone an instance to a new instance on another server so that the new clone will be same as a new installation without any customization and data in it.
  Thank you

  Richa says:
  Hello
  Anyone...?

  We have already responded to this above. What is the reason why you want to clone the instance without data? You clone production?

  Do a fresh install and apply all patches require a lot of time and effort, especially if you have a lot of patches applied.

  Thank you
  Hussein

• Book Module Lightroom 4 - can - I use a color picker to select a color in a photo to use as the backg

  I'm trying to match a background color of a page in a Blurb book using the book of Lightroom 4 Module.  Is there a way that I can use the color picker to select a color in the photo to use as color for the background and the type of color?  I see the color box for these situations, but the color picker doesn't seem to work with the range of color that appears and wrong to the photo.  Any suggestions?  I forget something very obvious?

  It works for me.

  The usual way to Lightroom: click the eyedropper in the palette of colors first, then hold and drag to your photo to the color of the sample.

• Freezes in Finder. looks like pieces of various files and I don't see any specific file to select

  Freezes in Finder. looks like pieces of various files, and I don't see any specific file to select. Only solution is to shut down the computer and restart. How can get fixed?

  Try to drag the /Home/Library/Preferences/com.apple.finder.plist file to the trash (not empty.) Also, drag the /Home/Library/Caches/com.apple.finder/ folder to the trash.

  If you see not the folder/Home/Library/and then see the following:

  Three ways to make the House/library folder Visible

  A. this method will make the folder visible permanently. Open the Terminal application in the Utilities folder, and paste the following at the command prompt:

  chflags nohidden ~/Library

  Press RETURN.

  B. click on the desktop, press the Option (⌥) key, select library in the Finder menu go.

  C. go to the folder in the Finder menu select go. Paste the following text in the path field:

  ~/Library

  Click the OK button.

• There is no possibility of ambiguity in the SELECT clause because any identifier in the SELECT clause must be a database column name

  Hello

  Doc Oracle says the following on the identifiers in the SELECT in PL/SQL clause: there is no possibility of ambiguity in the SELECT clause because any identifier in the SELECT clause must be a database column name.

  If we assume that only valid column identifier are allowed in the SELECT clause.

  But I tried the following:

  DECLARE
  toto NUMBER := 10;
  tata NUMBER := 0;
  BEGIN
  SELECT toto INTO tata FROM employees WHERE employee_id = 101;
  DBMS_OUTPUT.PUT_LINE(tata);
  END;
  /
  

  And there is no error telling me that toto is not a column in the employees table and the result is the same as: toto: = aunt;

  Won't the doc or did I just miss something?

  Thanks for your response!

  Hello

  rep0ne wrote:

  Hello

  Doc Oracle says the following on the identifiers in the SELECT in PL/SQL clause: there is no possibility of ambiguity in the SELECT clause because any identifier in the SELECT clause must be a database column name.

  If we assume that only valid column identifier are allowed in the SELECT clause.

  Post a link to this Oracle doc.

  But I tried the following:

  1. DECLARE
  2. Toto NUMBER: = 10;
  3. Auntie NUMBER: = 0;
  4. BEGIN
  5. SELECT toto IN Auntie FROM Employees WHERE employee_id = 101;
  6. DBMS_OUTPUT. Put_line (Auntie);
  7. END;
  8. /

  And there is no error telling me that toto is not a column in the employees table and the result is the same as: toto: = aunt;

  ...

  You're right that toto is an identifier, but this isn't a column name.  (Of a subquery) column alias are not database of the names of columns either, nor are the names of the user-defined function.

  Also, there is a possibility for ambiguity even if all the names are the database column names.

  Won't the doc or did I just miss something?

  I can't say until I see the doc you're talking about.

  Oracle documentation is sometimes misleading and sometimes just plain wrong.  For each mistake outright example that I saw in the docs of Oracle, there might be 20 cases where the meaning is unclear or misleading and maybe 200 where I just read it wrong.