Half-work on Y570 earbuds

Similar Questions

• var swf load - half work...

  In the previous thread, we have created the random script.

  Now, I want to switch to capable of loading swfs.

  List 10 random numbers in the 10 worked well a textfield.

  Currently after the modification, it displays only the last issue of film for all 10 clips. (dooh).

  I tried to add + (i + 1) String to the variable newSWFRequest (of course he did not)

  I searched and read the post on the forums. but couldn't trace the problem. (it could also be that ac3 does not support this)?

  So is it possible to activate this? or was it something simple I've forgotten again?

  var randNums:Array = new Array();

  myButton_btn.addEventListener (MouseEvent.CLICK, showRandomSWF);

  function showRandomSWF(event:MouseEvent):void {}

  for (var i: int = 0; i < 10; i ++) {}

  var randNum:int = Math.floor (Math.random () * 100) + 1;

  If (randNums.IndexOf (randNum) ==-1) {}

  randNums.push (randNum);

  //this was the previous script that works very well

  ( //this["myNumber"+String(i+1) + "_txt"] .text = string (randNum);

  now, I want to add this...

  var swfName:String = ' movies/film' + String (randNum) + ".swf";

  var newSWFRequest: URLRequest = new URLRequest (nomswf);

  } else {}

  i-- ;

  } / / end if

  Loader.Load (newSWFRequest);

  Loader.x = Xpos;

  Loader.y = Ypos;

  addChild (loader);

  loader2. Load (newSWFRequest);

  loader2.x = Xpos + 100;

  loader2.y = Ypos;

  addChild (loader2);

  etcetera

  { } //end of for i

  } / / end of function showRandomSWF

  You must create a new charger in each loop of your loop for and apply the load() method each Loader on each loop.

• a half working IPSec

  Hello world

  Thank you for taking the time to read my post.

  Using the ISO version 12.4 (13r) T11

  I have setup an IPSEC tunnel between my cisco 2821 and UBNT device.  The LAN side 2821 is 10.0.1.x and the LAN side UBNT is 10.0.2.x.  The internet is in the middle.

  Since the ubnt device, they can access everything on the 10.0.1.x network, but 10.0.1.x cannot access anything on the 10.0.2.x network.  IM thinking I have not missed any statement nat somewhere...  but where?

  Current configuration: 4951 bytes
  !
  ! 00:15:28 EDT configuration was last modified Saturday, June 7, 2014 by a-rogarrett
  ! NVRAM config last updated at 23:12:54 EDT Friday, June 6, 2014 by a-rogarrett
  !
  version 12.4
  horodateurs service debug datetime msec
  Log service timestamps datetime msec
  no password encryption service
  !
  hostname home.1
  !
  boot-start-marker
  boot-end-marker
  !
  enable secret 5
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA of authentication ppp default local
  !
  !
  AAA - the id of the joint session
  clock timezone EDT - 4
  !
  !
  !
  !
  IP cef
  !
  !
  IP domain name
  property intellectual auth-proxy max-nodata-& 3
  property intellectual admission max-nodata-& 3
  !
  Authenticated MultiLink bundle-name Panel
  !
  VPDN enable
  !
  VPDN-Group 1
  ! PPTP by default VPDN group
  accept-dialin
  Pptp Protocol
  virtual-model 1
  receive window 1024-tunnel L2TP
  !
  !
  voice-card 0
  No dspfarm
  !
  !
  !
  voip phone service
  replacement CLID name
  allow sip to sip connections
  no additional service moved temporarily sip
  no service additional sip refer
  SIP
  binding control source-interface GigabitEthernet0/1
  bind media source-interface GigabitEthernet0/1
  ID said ppi
  E911
  udp tcp transport switch
  Outbound proxy dns:
  Outbound proxy dns:
  No judgment call service
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  !
  username password 0
  !
  door-key crypto orddie
  address of the pre-shared key key
  !
  crypto ISAKMP policy 10
  BA aes 256
  preshared authentication
  Group 2
  life 3600
  ISAKMP crypto key hostname No.-xauth
  !
  !
  Crypto ipsec transform-set esp - aes 256 esp-sha-hmac orddie
  Crypto ipsec df - bit clear
  !
  orddie 10 ipsec-isakmp crypto map
  defined peer UBNT peripheral IP
  Set transform-set orddie
  match address 101
  !
  Archives
  The config log
  hidekeys
  !
  !
  property intellectual ssh authentication-2 retries
  property intellectual ssh version 1
  !
  !
  !
  !
  interface GigabitEthernet0/0
  Comcast description
  DHCP IP address
  IP access-group 184 to
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  orddie card crypto
  !
  interface GigabitEthernet0/1
  Network description
  IP 10.0.1.169 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface Serial0/0/0
  no ip address
  Shutdown
  2000000 clock frequency
  !
  interface Serial0/0/1
  no ip address
  Shutdown
  2000000 clock frequency
  !
  interface Serial0/1/0
  no ip address
  Shutdown
  2000000 clock frequency
  !
  interface Serial0/1/1
  no ip address
  Shutdown
  2000000 clock frequency
  !
  interface virtual-Template1
  IP unnumbered GigabitEthernet0/0
  IP nat inside
  IP virtual-reassembly
  peer default ip address pool ppp
  No keepalive
  PPP encryption mppe auto
  Ms-chap PPP authentication chap pap
  !
  PPP local pool 192.168.1.1 IP 192.168.1.10
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 dhcp
  !
  !
  no ip address of the http server
  no ip http secure server
  overload of IP nat inside source list 100 interface GigabitEthernet0/0
  !
  internal network of the access list 100 remark
  access-list 100 deny ip 10.0.1.0 0.0.0.255 10.0.2.0 0.0.0.255
  access-list 100 deny ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255
  access-list 100 permit ip 10.0.1.0 0.0.0.255 any
  access-list 100 permit ip 192.168.1.0 0.0.0.255 any
  access-list 101 permit ip 10.0.1.0 0.0.0.255 10.0.2.0 0.0.0.255
  access-list 101 permit ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255
  access-list 184 permit ip host IP of the device UBNT everything
  access-list 184 allow the host ip all
  access-list 184 allow the host ip all
  access-list 184 allow accord a
  access-list 184 permit tcp any any eq 1723
  access-list 184 permit udp any any eq 1701
  access-list 184 permit icmp any any echo
  access-list 184 permit icmp any any echo response
  access-list 184 permit udp any any eq bootpc
  access-list 184 permit udp any any eq bootps
  access-list 184 permit udp any any eq isakmp
  access-list 184 permit udp host 75.75.75.75 eq field all
  access-list 184 permit udp host 75.75.76.76 eq field all
  access-list 184 permit udp host 8.8.8.8 eq field all
  access-list 184 permit udp any any eq ntp
  access-list 184 permit udp any eq ntp everything
  access-list 184 permit tcp any eq www everything
  access-list 184 permit tcp any eq 443 all
  access-list 184 permit udp any any eq non500-isakmp
  !
  !
  !
  !
  !
  !
  control plan
  !
  !
  !
  !
  !
  !
  !
  Dial-office of communications telephone voip
  destination-model
  session protocol sipv2
  session target ipv4:10.0.1.99
  session udp transport
  Codec g711ulaw
  !
  Dial-peer voice 10 voip
  destination-model 1...
  session protocol sipv2
  session target dns:
  session udp transport
  !
  !
  SIP - ua
  
  !
  !
  !
  Line con 0
  line to 0
  line vty 0 4
  entry ssh transport
  line vty 5 15
  access-class 100 in
  entry ssh transport
  !
  Scheduler allocate 20000 1000
  NTP-period clock 17180192
  NTP 17.151.16.21 Server prefer
  !
  end

  Hello

  you have problem with ACL:

  you need to do it this way: because recommend Cisco ACL must be mirror on both sides.

  access-list 101 permit ip 10.0.1.0 0.0.0.255 10.0.2.0 0.0.0.255
  No access list 101 didn't allow ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255

  and

  No access list 100 deny ip 10.0.2.0 0.0.0.255 10.0.1.0 0.0.0.255

  When you use pure IPSEC a site not of GRE over IPSEC, then you need allowed ESP not Grateful

  No access list 184 allow accord a

  access-list 184 allow esp a whole

  the latest Cisco recommends for no. - nat with road-map:

  IP nat inside source map of route No.-nat interface GigabitEthernet0/0 overload

  route map no - naallowed t 10

  corresponds to the IP 100

  Kind regards

  Kazim

  "please me, rate if useful post.

• Half of the touchpad not responding completely on my G56

  This product usually 2-3 minutes after the opening of the laptop and when he returns to hibernation / sleep. Literally half of the touchpad is completely insensitive to gestures, tapping and the lateral and vertical movements. The other half works very well. I reinstalled the drivers from the HP website. It will fix itself if I close the lid and open it again or reset the device in the Panel of Synaptics.

  Install the latest firmware (BIOS) from here and also to install the latest drivers here for your laptop touchpad and let us know if the problem persists

• dose - anyone know why my computor screen is clear and half as its lower defraging

  The screen is only half works down have is as lines appears in the defraging on your screen came yesterday registration contrast and other things but I don't know what I did I thought I hit just the red x, but something lit but I don't have what I did I don't know much about computors or fix errors how can someone help is my computor goes wrong Oh yes I was back up files at the time with clickfree backup

  [moved to Windows Vista - repair and recovery; from Virus & Malware]

  Any hard material is struck on the monitor?

  Try to start in Windows safe mode and check is ' t working properly or not?

  Try get in the BIOS settings and see display normally comes or not?

  Check the VGA cable if it's a pc desktop, or laptop means first to try other steps above.

  Please, come back with the answer above troubleshooting to help further. Possible, post instant return of the monitor to better identify the problem.

  #D09r

• direct tiles do not work.

  I downloaded and installed Win 8 Pro today I paid for. Live webcam tiles go anywhere I get a start, then backward to start screen.

  Its driving me crazy.
  Help, please

  OK so I reinstalled about 5 times... it crashed and more... then it worked... Then, he didn't... so I plugged a giant screen and it half worked... then I turned off the screen of the laptop completely and removed your external antivirus and it works

  It took 2 days... I was ready to move on to a book of chrome... I guess it's inevitable, possibly

• I need to make a banner 300 inches wide, but it is defaulted to 224 inches.  How can you make your plan of work greater than the maximum allowed?

  I ned to do a banner 12' high x 25 ft wide.  The default width to 224 inches.  How can I extend this to my width?

  As SRiegel suggested above - I would half work to make things easy for you. So, make your plan of work 6' x 12.5 then output the file to 200%. See also the note above from messages on images.

• Download will not work :(

  Hi I just bought the web and creative suite design 6 and have a serial number, but I can't get the download to work. I tried 3 TIMES. The first said that I didn't have the right program to open files .z7 so thought there was an error in the download and did it again to get the same answer. Then I downloaded a program called bitzipper which said that it would be that half worked as I could see that yes I have download it but bitzipper said there is nothing to extract. Given how long the download takes I don't especially want to keep doing it over and over again. I looked on here to see what a program called Alkami or something (sorry lost the page on that I was) is suppose to open first, then the download was to begin, but this does not happen. Your help is greatly appreciated as I am very frustrated.

  See you soon

  Have you tried the download from http://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html

• AppleScript search / replace in Excel sheet text Document

  I'm new on Applescript and I'm trying to create a script that can browse a document text (.html) and find and replace different phrases with a corresponding cell in an Excel document.

  I'll put placeholders in the text to be replaced like B_1 (first value to replace), B_2 (second), B_3 etc...

  They must be replaced in order using the cells B1-B9 in the Excel document. Phrases in the Excel document will be changed each time, so why it must be dynamic to capture them rather than a standard find & replace the script with static values.

  I followed this thread that everything is logical:https://discussions.apple.com/thread/7008048?start=0 & tstart = 0

  However, I continue to run into compile errors. Here is my current code:

  tell application "Microsoft Excel" set colB_data to value of every cell of range "B1:B9" of worksheet 1 of document 1 end tell tell application "Sublime Text" tell text of "Users/maxquinn/Desktop/index.html" repeat with index from 1 to count colB_data replace ("B_" & index as text) using (item index of colB_data) options {starting at top:true, match words:true} end repeat end tell end tell 

  The first half works fine, but the second half gives me error "Expected end of line but found identifier." and highlights the 'using' in the 'replace' command (line 8) .

  Anyone know why this could be and is there any other glaring error in the script?

  Thank you!

  Max

  Restructure your AppleScript in the Apple Script Editor (then do not peer in a continuous line of code) and then paste here using the Advanced Editor. Then select all the posted AppleScript and in the Style menu, choose paragraph. Now, your code is readable (hopefully) to us.

  

  The second point. Sublime text does not include any AppleScript script definition, so you can not handle it with AppleScript.

  TextEdit is scriptable, and probably you want in plain text rather than rich text (RTF) mode.

• Cannot find NI0DAQmx devices on the network. Test Panel button grey

  Hello

  I have a Dell than T710 Win Server 2008 R2 64-bit. NidaqMX 9.3 is installed. The dialog box search for network OR-DAQmx devices cannot find my NI ENET-9163 carrier with a card NI 9215. This card has a static IP address in the same subnet as the LAN of the PC port. I ping the device.

  However in the search network OR-DAQmx devices dialogue box I can add the Board manually by specifying the IP address. This seems to half work as long as it saves the map MAX, but the test panels button is grayed.

  I installed Nidaq MX 9.3 on my win 7 64 bit laptop and I can find the card properly and test it. Clearly there is something wrong with the config on the Dell software, but I have no idea what. Any help is appreciated. I stumbled on, IP addresses etc. I also disabled the 3 other network ports on the Dell server in case that is the question.

  Thank you

  Andrew

  Hello Andrew,.

  I could do some tests on our Windows 2008 R2 server. I was able to replicate this but not as easily as you did. We have 2 network adapters on that server. We have solved this problem is to do the following:

  1. disable IPv6 IP addressing all the ports of the network.

  2. change the metric of the Interface on the network adapter. We have high, so a value of 50. You can get this metric by going into the properties of your network card > your IPv4 properties > advanced on the general tab > UN select Automatic metric and replace with static. (the entries are 1-60). Do this for all of your network adapters. Given that we have this setting that we have never seen the question re occur.

  We also checked that it doesn't happen at all on the new cDAQ-9181 chassis. This chassis is intended to replace the ENET-9163. If it is possible for your upgrade I would recommend this option. You should be able to work with your local sales channel to get one to test with. We have 20 + 9181 in this system and have never seen the issue of not being able to Max commonality to the chassis.

  Let me know your results to adjust the parameters I mentioned above.

  Thank you!

  Corby

  CDAQ PES of R & D network

• Back to the widi r7-571

  Ok. The r7 is advertised as being capable of widi. I know that's not the broadcom adapter. So I happened to have a processor intel advanced n6235 or two sitting and jumped in. The wireless works fine. Bluetooth does not even appear in the Device Manager. And without ability of widi. Although the check utility intel widi does no upgrade needed. But it says the same thing with the installed broadcom. I can't find anything showing a difference at the level of the pci-e material between the cards. Just talking about bios of some possible oem on a whitelist for some manufacturers. But in this case the intel should not work at all. Any ideas? Even if there was a difference in the interface, I would buy another card. But the 6235 is a solid card I have used quite awhile now, everything's supposed half work in this laptop. And I don't know what other card works better anyway. Thank you.

  Ok. Ive heard stories of people lose widi connectability after upgrade to windows 8.1. So I reinstalled back to windows 8, put my intel advanced n-6235 back, updated drivers and installed the widi windows application 8. Run this application, I know to connect to my netgear ptv3000 widi, and my screen is finally connected wireless on my 42 inch TV. For once for all certainly is possible on an r7-571 acer with windows 8.

• Pentium 4 2.8 Ghz running at 1.4 Ghz. How to solve it?

  I have an old PC (D310) and I replaced the old (2.4 ghz) processor, with a new (2.8 Ghz). Now when starting my PC it says 1801-microcode patch error

  Missing or invalid processor microcode patch. Please contact compaq computer corporation for a new ROM BIOS support the new processor stepping.

  Due to the age of the PC, it is not possible to overclock or something like that. I don't know if this is necessary, but I'll give you more information in the bios:

  -Compaq Evo D310

  -Processor Pentium (R) 4 1866 Mhz processor

  -Processor speed: 1866/533 mhz

  -Steps processor: F29

  When I go to the specifications of the system it says pentium 4 2.8 ghz (HT active!) clocked at 1.4 ghz... And when I go to the processor with speccy, it indicates the stock bus speed is 200 MHz, but it runs at 99.7 mhz. I have a motherboard 0804 h and a geforce mx 4000 videocard (going to soon replace). I have windows XP 32-bit Home Edition.

  Do I have to install a new BIOS? How to do this? Or is it not possible to do and if I put the old processor in?

  Desperate for an answer!

  Yours sincerely,

  TheMcSquirrell

  Hello:

  Yes, the processor works. I'll let you know why it only half works speed/FSB.

  The PC cannot run a processor with a front end of 800 MHz multiplier of a FSB 800 bus is 2 x 400 MHz.

  If the PC picks up the processor and cut it in half, so it can be run. Half of the 2.8 GHz = 1.4 GHz. half of the 800 MHz is 400 MHz.

  As I said, if you want to keep it this way and press F1 each time that you start the PC, it is up to you.

  There is no solution for this processor works as expected in your machine.

  If you want to run right, then install supported processor with a 533 Mhz front bus speed and a cache L2 512 as shown in the quick card that I posted above.

  Paul

• CARS, stuck in Flash mode

  I tried to update the firmware of the DRAC on one of our servers M710HD yesterday and there only half works. The server is in place and works ok, however I can not enter the DRAC. In the web interface, it is has no information on this subject, and with orders running racadm gives the ERROR: card is in Flash Mode. Physically, I can't get on the server because it is located 300 miles in a data centre. How can I reset the card?

  It sort! I downloaded a version compiled for the ipmitool and copied to a data store that could access the host of problems. I then SSH in the host, changed directory to when I had put the ipmitool, modified to allow permissions to execute with chmod a + x ipmitool command, then ran ipmitool mc reset cold. After a few minutes, my connection DRAC has been restored

• No matter what BB-moderators REALLY real on these forums?

  I'm sorry, but I'm getting pretty sick of the way that BB does NOT have support of the community. I'm still waiting the answer of 2 or more threads. If you can't stand us, you'll just receive * beep *, half work, half-no tested applications in your ecosystem. But then again, you're probably already used to that so I can't see why you would not care.

  That said, the easiest tool to convert my app Android of Eclipse (apk2bar) is a failure on my Mac.

  No matter what I try, new eclipse, new sdk android sdk standalone, standalone tools, new plugin BB10, set some environment variables on .bashrc, .bash_profile, $PATH, $ANDROID_HOME, / etc/launchd.conf, $ANDROID_SDK, sdk to move to new folder, set folder paths and other advice again, others provided * NOT * run on my Mac Air.

  I even edited the file apk2bar (located in the dossier.../eclipse/plugins/net.rim.ajde_1.5.2.201302260701/blackberry.tools.SDK/bin/) to include the ANDROID_HOME variable inside this file, defined and exported. Finally I got a different error that "the Android SDK path is not defined".

  [ERROR] Invalid % ANDROID_HOME % path: / Users/dritan/android-sdk-macosx /.

  Of course, the SDK path is defined in Eclipse but makes * absolutely no difference * for the plugin bb if you put a real SDK path there or oranges. The only way to get apk2bar to recognize the Android SDK is to export the environment variable under «...» Eclipse/plugins/net . RIM.ajde_1.5.2.201302260701/BlackBerry.Tools.SDK/bin/apk2bar' but apparently it STILL does not recognize it. "

  I would like to have a Word with the manufacturers of these tools and the API engineers. Why BB does not have the word "incompetent" when talking about this new generation through other developers platform? I would like to see this platform thrive and succeed (because the devices are not half-bad) we are however hampered by the development process.

  The way I see it, there are 2 options:

  1. remove the APK for BAR features entirely and be done with the BS that confront all the Android devs

  2. support full on conversion.

  At the moment I'm stuck on a plethora of APK to bar problems, API calls return different values between Z10 and Q10 to development tools.

  Sincrely,

  A tired developer malcontent wishing he didn't have to do deal with this * beep * EFFIN ALL DAY

  Hi Jonathan,.

  The BlackBerry plugin for Android 1.6 SDK tools version is now displayed and supports the version 22.0 of the Android SDK tools!

  You can download the tools CMD here: https://developer.blackberry.com/android/tools/

  Or for Eclipse, you should be able to see the update now.

• How do you lock orientation in javascript?

  I seemed to have gotten myself in a bit of a pickle and do not know the solution.

  I have a small collection of apps that I want to condense into a single application.

  I'll put them at the top with two menus, this one works properly in the portrait, one in landscape. I know I can set the orientation in the configuration file, which is what I did at this point. But what I have to do is:

  The user based on an option in the main menu, go to menu locked in portrait. Applications that get clicked in this menu must also be locked in portrait mode.

  If the user presses the other option in the main menu, they go to a menu located in the landscape. Applications that will click on this menu must be in the landscape.

  So basically, I need two applications groups merged, half work in portrait only, the other landscape only. The focus can be locked by javascript program? I hope that it can be... just do not know how.

  Hi there, check out orientation.js in this example for WebWorks APIs aimed at locking rotation:
  https://github.com/BlackBerry/BB10-WebWorks-samples/tree/master/orientation

  The complete documentation can be found here:
  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.app.html#.lockOrientation

  Unfortunately HTML5 has no lockOrientation API as part of the standard yet, so you don't have to depend on the implementation of WebWorks for now.