Any paragraph styles are not the same as the original document

Similar Questions

• My paragraphs different although they share the same style. Paragraph styles are not uniform

  Hello.

  I try to get my paragraph styles to all be uniform. I have imported a model and have several text boxes on several pages. I've deleted almost all paragraph styles to start again. But for some reason, the style that I want to use is in 1 box of text, and then in all the other text boxes, it's a different style. I created a new style, but when I click on it when the text is highlights, it changes, but does not seem this area of a text game.

  Any help is appreciated.

  There is the problem - your text has resized with the text boxes; It's showing the size and the size of acutal. To fix, use the menu at the top right of the window to InDesign and for each text box, reset scaling to 100%. You must delete the replacements again.

  See this thread for more information

  http://forums.Adobe.com/message/3392608#3392608

• Paragraph styles are not properly in automatic Table of contents

  Hi all

  I'm currently busy with the lay-out of my doctoral thesis in Indesign CS6. I did the separate files for each chapter, after that, I joined the files in a document of a book. Now, I need to create a table of contents and want to do using the Table of contents style.

  I've already customized a table style content in which I said Indesign which paragraph styles should be included in the table of contents. I also created new paragraph styles to use as entry style. When you create a table of contents the lay-out seems just perfect, except that I set the text for being "fat" in my paragraph style, but it comes in the form of 'regular' text in my table of contents. Now I can pass this "BOLD" text by selecting it and alt + shift clicking on the paragraph style in the paragraph style menu. Problem is that after updating the table of contents text back to "regular". All the other stuff that I defined in the paragraph for entry style style (e.g., tablets, the font size, leading) are applied.

  How can I solve this problem? I would appreciate your comments, because it's annoying me a lot: S.

  Thanks a lot already!

  Did you apply a character style to your topics throughout the book?

  If so, this could cause the erratic behavior that you see.

  Check your table of contents update to see if there is a character applied to the imported text style.

• Dell V305 printer that prints only a narrow area of the original document

  Put a document on the glass scanning and printing results in only a thin vertical strip of the original coming out. Reorganize the document on the glass has no effect.

  MRCassady,

  Look on the printer for the default scan settings, perhaps under the key (if you have printer a)

  Make sure that the appropriate paper size is selected. You can try automatic but I like to use a fixed paper size

  Rick

• The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

  The button create a new paragraph style does not work for me, is this a bug or something stupid I did?

  Pages on El Capitan 10.11.1 v5.6.1.

  I just created a quote indented using ITC Garamond Book Italic with left and right margins altered. Well selected, I clicked on the + symbol in the paragraph, named the new Styles pop-up style Indented quote and you press return.

  Always selected in the body of the document, I applied the body paragraph Style to restore the normal formatting and then with the text again, the paragraph of citation Style indented - who worked as expected.

  If you want that your new Style of paragraph to survive across documents, you will need to save it in a model. You can also have two different Pages, documents open in Pages v5.6.1, and copy/paste the custom styles between the selected text in these documents by using the Format menu.

• Separators from decimals/mile are not the same for the number and format of thousands. How can I get even. ?

  I installed the version 11 of Pastel partner and the error message "separators from decimals/thaousand for number and currency formats are not the same" how to get this right?

  Pastel partner support site through and their instructions/FAQ

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• Applied styles are not displayed in preview or generated the file

  I added a number of new styles to my style sheet. They show well in my view Design.  However, once I have applied, and then click the Preview button or even generate webhelp to see what they look like generated, the styles are not displayed to the top.  What Miss me?

  BTW... I use RH10.

  Thank you!

  Ko

  OK... I just browsed my updated help and found 2 "{" media that were out of place!  Oh my god... I'm sorry... but I KNEW it had to be something simple I was missing... but I really had to go through it with a fine-tooth look.

  Thank you! SORRY FOR THE BLONDENESS ONCE MORE!

• drop table left-right scale of the value axis are not the same scale

  http://img20.imageshack.us/img20/6264/questionk.PNG
  
  the scale of the axis left and right are not the same.
  
  How to configure?
  
  Thank you very much!

  Hello

  Try this
  Chart, Goto Advanced properties-> check the line sync and the axis of the bar
  This will make the two scale of identical values.

  Thank you
  Vino

• Paragraph styles are ignored by InDesign

  I use InDesign CS4.  My changes paragraph styles are ignored by InDesign.  All the font changes are ignored and everything is "BOLD".  This just started happening.  I tried to uninstall and reinstall.

  Can someone help me?

  Looks like you've applied a style of bold text in addition to the paragraph style.

  Check the character Styles Panel. It is not rare to accidentally set a default character style by selecting with any selected text. When no text is selected, the character Style must be [none].

• How can I force a paragraph style without losing the italics?

  This has been annoying me for ages. I work on documents in Word, using italics for book titles, etc. and then import them into indesign. I apply a paragraph style and three out of four times the bits in italics are preserved. However, the fourth time the paragraph style does not (probably due to the presence of italics) and I have to force him to do it using Alt-click. Invariably, the italics is replaced by Roman.

  It happens earlier with a bunch of notes and endnotes in a book, I'm working on and means I have to go back through each of them, manually applying italics to my books and reference titles. Is it possible to force a paragraph of note/reference style without losing the text in italics?

  Thanks for your suggestions,

  Tom.

  I'm not sure that long-term planning is needed here.

  If your only concern loses italics when importing from Word, create,.

  in InDesign, an italic character style. Then do a search and replace

  in the document, InDesign (once you have placed the Word file)

  looking for an italics, formatting and replacing with your italics

  character style.

  Who will save you from losing your italic formatting.

  Repeat for bold, bold italic, exponent, index and nothing else

  the author uses.

  There are scripts that help in this process (I think one of them is

  called "preptext", by Jongware).

  If you want a complete solution that can be found all types of

  override setting in shape and creates and applies the appropriate character

  style, check out my script "create character the Styles of overrides him."

  available on the script on freelancebookdesign.com tab.

  Ariel

• Things are not the tail

  Things are not the tail in Design view. They are very good in Live View and when I upload to the server. Any suggestions? One minute, they were beautiful and the next day they were all wobbly.

  http://michaelgabrielmusic.com/home/home.html

  Here's what it looks like in Dreamweaver - mode Design.

  

  I use Dreamweaver CS6.

  Design view is a relic of Macromedia in the past when all sites use tables-based layouts.  A lot has changed since then, but Design view has not kept pace with these changes. It will be eliminated later.

  For the purposes of editing, Design mode is very convenient, but at best, this is only an approximation of what would look like your site in older browsers.  If you use Responsive Layouts, fagetaboutit!  He can't handle the advanced CSS.

  Use the Live View and Preview in browser to test your work.   The Design mode is mainly for editing content.

  The current versions of DW CC have edition Live View.  At some point, you may want to increase the Creative DW Cloud version.

  For a taste of DW CC in the future, please download the public beta version currently in the trial.  It's still a work in progress, but the Beta team requires an entry.

  Welcome to all! Beta version of Dreamweaver is now online!

  Nancy O.

• Why apps like slate say available on any device but are not compatible on Android?

  Why apps like slate say available on any device but are not compatible on Android? It is today the largest operating system.

  Hi Michael % 20alaska,

  We have a slate Adobe user forum that you can post to. Please go here and post your situation of assistance:

  Adobe_Slate user forum

• [win] [js] [cs4] find/replace the paragraph styles without losing the replacements the

  Hi guys I need some help here.

  I created a javascript script that will find and replace paragraph styles for the DOCFILE with indesign paragraph styles. everything works fine but the problem is that, when she applies paragraph styles, he loses all replacements the. I tried:
  
  changetext (false);
  
  but his does not work, this is a kind of conditional parameter that I can put in the function changetext() so that it used clear local overrides?

  Thank you.

  Horse
  

  Use findGrep() (or findText()) instead of changeText(). This returns an array of items found. Then, you can loop through the array and apply a paragraph style without erasing the replacements (the 2nd parameter must be false).

  Example:

  Main();
  
  function Main() {
      var foundItem;
      var doc = app.activeDocument;
  
      app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
  
      app.findGrepPreferences.findWhat = ".+";
      app.findGrepPreferences.appliedParagraphStyle = "Body text";
  
      var foundItems = doc.findGrep();
  
      for (var i = 0; i < foundItems.length; i++) {
          foundItem = foundItems[i];
          foundItem.applyParagraphStyle(doc.paragraphStyles.item("Body"), false);
      }
  
      app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.NOTHING;
  }
  

• Application of paragraph style without erasing the replacements, I need another way. Help me on this...

  Hello

  Here I m finding a particular paragraph style and its replacement by another paragraph style without erasing the replacements.

  The script below is working very well.

  PS = app.activeDocument.paragraphStyles.item ("Tx2");
  s = app.activeDocument.stories;
  for (i = 0; i < s.length; i ++)
  {
  p = s [i] .paragraphs;
  for (j = 0; j < p.length; j ++)
  {
  teminal = p [j].appliedParagraphStyle.name;
  Alert (pname);
  If (teminal == "Tx1") {}
  p [j] .applyParagraphStyle (ps, false);
  }
  }
  }

  But is there any other way to do... You can help me on this topic. For example, I tried in the way below.

  myDoc = app.documents var [0];
  app.findTextPreferences = null;
  app.findTextPreferences.appliedParagraphStyle = "Tx1";
  myFind = myDoc.findText (true);
  PS = app.activeDocument.paragraphStyles.item ("Tx2");

  < < Here, I need help like applyParagraphStyle (ps, false); > >

  Is it possible in this way? .......

  Thanks in advance...

  Replace

  < here="" i="" need="" some="" help="" like="" applyparagraphstyle="" (ps,="" false);="">>

  with

  for (item = 0; point

  myFind [point] .applyParagraphStyle (ps, false);