Any person having connection problems?

Similar Questions

• Any person having a problem downloading client windows Office-in the workspace 1.5

  Whenever I try to download Mac or windows client desktop continues to direct me to the page wmware.ca... from our gateway-workspace download page?

  Anyone with the same problem?

  You must manually configure in 1.5 (Yes weird?). Instructions are on page 36 installation guide

  http://pubs.VMware.com/horizon-workspace-15/topic/com.VMware.ICbase/PDF/horizon_workspace_15_install.PDF

• I have a HP Pavilion Elite m9280f PC, I replaced the case for a larger, having connection problems

  I have a HP Pavilion Elite m9280f PC, S # [personal information deleted], Windows Vista 64-Bit. I replaced the case for a larger, having connection problems. Lost manual, downloaded manuals, I can not find a diagram of the wires hanging in the motherboard. Help please Tom

  Tomahawk, welcome to the forum.

  This is the page for Specifications of the motherboard of the computer.  You should be able to enlarge the diagram of the motherboard to locate most of the connections.  The only place you may have a problem is with the power button connector.  Some cases are not compatible with HP moterboards.

  Please let us know if this solved your problem or not.

• I got these messages: "Sorry, there is a problem with Hotmail right now"... "Hotmail is having connection problems.

  I got these messages: "Sorry, there is a problem with Hotmail right now"... "Hotmail is having connection problems. You might see an error message when you try to connect.

  original title: cannot access Hotmail

  I need to go to my account to retrieve an important document for a meeting! Please advise how can I sing to my account?

  Hello

  The Hotmail service problems. See the following link to check the status of the service.

  Status of hotmail - Windows Live: https://status.live.com/detail/hotmail

  Once the service has been restored, there will be a notice at this link.

  Concerning

• Two wifi routers EA6200 having connection problems.

  I had a single wifi router configuration EA6200 and it was working fine but it has not reached the corner of my house. I decided to buy a second EA6200 in an attempt to expand coverage wifi and nothing else that problems have had since then. I tried several configurations and there are always questions where wifi is either very slow or cut all together. I tried to configure the routers by using the options listed in the manual. We'll call it the router connected directly to the modem ROUTER1 and ROUTER2 upstairs router.

  I connect both routers via a power adapter line I used for a while since I rent and can't pass the cables through the walls. I have one of the LAN ports on ROUTER1 connected to port WAN on ROUTER2 and ROUTER2 clipping value. I tried with ROUTER2 get his address IP of ROUTER1 automatically and I also tried to set a static IP address on ROUTER2, but I always had connection problems. I also tried one of the LAN ports on ROUTER1 connecting to one of the LAN on ROUTER2 ports. I put a static IP address on ROUTER2 and disabled DHCP. For both configurations, I tried to have the same SSID and password for both routers so that I can roam and connect automatically to the strongest signal and at first I put the automatic channel selection. I still had problems connecting so I tried to change the SSID of the router and change the SSID for the bands of 2.4 and 5 GHz and I tried to adjust the channels myself no conflicting channels and I still have problems.

  Again, the problems I encounter are failure intermittent wifi where it disconnected completely from the wifi but will reconnect then slow connection speeds not long after but also intermittent. Also, I have several chromecast dongles on the TVs in my house and they also periodically lose the connection to the network and have a lot of buffering issues. These problems disappear with a single connected router. I also tried to reset both routers and disconnect and plug my modem at the factory.

  All the ideas, because I don't see anything else to try?

  Bilz says:

  If I understand you correctly I tried already. I connected the LAN to LAN and used the static IP you listed for the second router. I put the SSID for the 5 GHz band were the same for both routers and used a different SSID for 2.4 GHz bands, but it's still the same on both routers. I used the Wifi Analyzer app to determine the best channels for my router and I put them all channels different worms. I don't know if I used specifically 1, 6 or 11, however. It would make a difference? For example if I used chanells 4 and 6 for 2.4 GHz bands, do you think that this would have caused some of my questions?

  Not quite. All SSIDs 4 must be different. You can be the cause of the camera jump back using the same ssid. So it could be xxxxx_24p and xxxxx_24s and even for the 5 GHz. xxxxx_5p and xxxxx_5s

• My new 5 d mkIV take a few seconds to write in the CF card, any other person having this problem

  I missed something in the game to the top... We should not 7 frames on anything other than the Auto... Help, please

  bpstevens wrote:

  Thanks for your reply Diverhank. All the itmes you mentioned below I have disabled according to the manual, I've read. I didn't buy it for speed I have a 5 d MkII 7 for this.

  I think that if you should be able to shoot without having to wait 4 seconds for it to write to the card and you can take your next shot... I am writing to a card Compact Flas - Scan disk Extreme Pro 16 GB 160 MB/s

  The thing that is relative, it is in auto mode to burst up to 7 fps continuous shooting,.

  Thanks again for your help

  Almost, the answer must be that you've stumbled upon one of these warnings shaded blue above, resulting in a setting that is substituted automatically in auto mode. Maybe the RAW dual-pixel, for example.

• mail keeps having connectivity problems

  I have a MacBook Pro 15 "mid-2015 - and I always have problems of e-mail connectivity.

  I get the "cannot connect" - but then it clears itself when I do 'make connections online.

  My work computer is the same model with the same accounts and does not have this problem.

  

  You have this problem on all networks, or only one?

• Intermittent connection problems Atheros AR5BWB225 Wireless Network Adapter.

  Original titile: constantly restteing my Atheros AR5BWB225 wireless network card

  Hello, I just got a new computer, it is an Acer Aspire S3.  I have problems with stay connected to my network and having to reset the network adapter from one or two times a day at intervals of a few minutes.  There are two other laptops (HP and Toshiba) in my environment as more well-connected smartphones and ipad, but my computer is the only one having connectivity problems.  Any idea will help you.

  Hello

  1. have you updated any drivers, including drivers for network card?

  I suggest you perform the steps in the below link:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  http://support.Microsoft.com/kb/928152

  Also, check out the following links for more information:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  Hope this information is useful.

• Connection problems with O2/UK

  Hi all

  II having connection problems when running my application on the network O2/UK. It is specific to the said operator then please don't direct me to General articles on connection settings (I have a simple library for dealing with this).

  I first tried WAP2, which I think I read was the best option, and it failed with the following text: "java.io.IOException: APN is not specified." Connection parameters used were: «;» ConnectionUID = WAP2 + trans"(extract from the records of service). This indicates to me that the settings in the service record are not OK...

  Then I tried wap1 with the following settings found on the web (pinstack.com):

  Gateway IP: 192.113.200.195
  Port: 9201
  APN: wap.o2.co.uk
  username: o2wap
  password: password

  with this, I have net.rim.device.cldc.io.waphttp.WAPIOException. The parameters can of course be wrong (that's the point of not having them in the camera, as do all other manufacturers, BTW...). Y at - there someone here who has done other app works with o2 UK without resorting to the BIS? Any help is appreciated.

  Thank you

  Laszlo

  1. If you try WAP 2.0 TCP, then instead of '+' it probably should be a space in the ConnectionUID. It should read "ConnectionUID = WAP2 trans. You probably get a sign '+' because you think you need exhaust URL parameters, which is not the specific case for RIM connection settings.

  2. If you try Direct TCP (aka carrier TCP today), then take a look here: http://www.filesaveas.com/gprs.html I got a card SIM O2 (contract) and the "Mobile Web" APN settings worked very well.

• Connection problems with atheros ar9002wb-1ng

  I have 2 computers laptop toshiba satellite.  I just updated my router to Belkin ac1200 wireless router.  I'm having connection problems with my satellite l750, with atheros ar9002wb-1ng wireless network adapter - keeps disconnecting with a signal strength low however the other satellite I with a realtek rtl8188ce wireless lan has an excellent signal strength and works very well - how to fix this?   I'm not very techno so easy instructions please.  Thank you.

  Hi Jak,

  Welcome to Microsoft communities.

  I understand that the wireless connection is disconnected.

  1. don't you make recent changes that caused the problem?
  2. any message/error code?

  Try the steps in the following methods and check the status of the issue.

  Method 1:

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  Configure the computer to clean start State to check software conflicts and check the status.
  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 of the article mentioned above.

  Method 3:

  Wi - Fi and in Windows network connection issues.
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Please report if you are still having the problem. I'll be happy to provide you with additional options available that you can use to get this problem is solved.

• Projector connection problem CD

  I'm creating a product CD projector and all goes well. But I'm having connection problems. I'm trying to make a link to an HTML document that will be on the CD. The problem is that when I play the movie projector, the link does nothing. Nothing is displayed. How can I solve this problem. I use the getURL script, but that does not work. The name of the HTML file is documents.html. Help, please!

  In fact, it worked. I think what was happen I typed the wrong file in the URL of the getURL line section. Then you should be able to use the action script:

  on (release) {}
  getURL ("file_name.html", "option in the window");
  }

  with a Flash button or a button symbol

  Thank you very much guys for trying to help out me if. Peace

• my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  Hi sh8kdown,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not connect to Bluetooth devices on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  (1) what is the brand and model of the computer?

  (2) what is the model number of the Bluetooth devices?

  (3) you get an error message?

  (4) did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Troubleshoot issues with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Applicable to Windows 7 as well)

  Method 3: Error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device: http://support.Microsoft.com/kb/2654568 

  Reference:--

  Add a Bluetooth device to your computer: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Someone at - it encountered problems with the iPhone 6 if weak reception. the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 to see if that helped. Any advice would be great!

  the phone goes crazy on his own? I have two employees in the SoCal area having this problem. Both have updated to IOS 9.2 and on the Verizon network. Any advice would be great! «The phone cut, connects during a call to Conference of someone else in (the phone chooses who to call), it basically starts random on the phone stock selection as if someone is trying to use it.»  It puts not only calls on mute.  The keyboard for contacts has been absent for a while, but is now back. "That's what they live. We tried to reset hard phones, the last option that we have not yet tried is wipe it off and start over, but I don't see that as a solution, since one is nine and the other is about 6 months with the same problems accurate.

  Hello FergusonChris,

  Thank you for using communities of Apple Support.

  I understand that your business has iPhones whose screens are behaving erratically.  Given your description of the issue, it seems that the screen may be dirty or there is the screen protector/case that interferes with the screen.  To further support this issue, please see the link below.

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  Take care.

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Cards will be open any after update 9.3. Anyone else having this problem?

  Cards will be open any after update 9.3. Anyone else having this problem?

  No, not at all. Cards work properly.

  Try a forced reboot: hold down the House and on the buttons until the unit turns off. Ignore the cursor off if it appears. Once completed, if it does not start on it own, turn off power with the key On. In some cases, it also contributes to double click the Home button and close all applications before restarting.

  Also, make sure card is configured to use mobile data (settings app > cell phones > cards [turn it on if it isn't already].) And that location services is enabled for it (settings app > privacy > location Services)