Qosimo G20: Settings Wlan WEP is not possible running Config free?

Similar Questions

• The WLAN button ' does not ' Windows Wireless config does not either

  I just reinstalled Windows XP on the PC of the client after a hard disk failure, but I can't get the laptop to work wireless. I installed the adapter of Intel 2200BG correctly & wireless windows zero configuration "works" according to control panel/admin tools/services, but the Windows wireless configuration icon isn't there & free Toshiba config utility tells me to "change the wireless adapter", but neither the switch on the left side of the laptop or the function & F8 key makes no difference.

  I got probably a thousand or more PC, but I am baffled by this. Any suggestion would be appreciated gratefully.

  Regards, Alan.

  > I correctly installed the adapter Intel 2200BG & wireless windows zero configuration "works" according to control panel/admin tools/services, but the Windows wireless configuration icon isn't there

  You are two possibilities to configure the WiFi network;
  (1) you can use the clean windows zero configuration settings
  (2) you can use the Intel ProSet utility

  When you use the Intel Proset, you must turn off the clean windows zero configuration settings.
  You can do this in the network-> connection WLan network connections

  In the WLan network connection properties, you can enable the option called display the icon in the notification area when connected.
  This would enable the WLan icon in the taskbar.

  PS: What laptop do you have?

• Qosimo G20: Device i/o error - DVD drive does not read CD

  Hi, im having a problem with the dvdrw drive on the G20 PQG20E Qosimno, it does not read discs, the only drive that reads without problems is to restore dvd and Heroes (dvd movie) and origonal CD, it does not read any cd s that are not original.
  I get a "D:\ is not accessible.
  The request could not be performed because of an i/o device error"

  Anyone have any ideas?

  Thank you!

  Simon.

  Hello

  I guess the discs not all burnt gift? t working in this player.
  I know that not all media work on all players. In the manual, you should find a list of tested and good work supports.
  I recommend that you test the CD and DVD that is recommended in the user's manual.

• RV180W of WLAN traffic is not routed to WAN

  My WIFI traffic is not routed to WAN.

  I can access LAN and plug to NIR all on the local network. But internet access is not possible. WAN LAN access is allowed.

  I have reset the RV180w to factory settings and also reflashed the firmware to make sure.

  To configure a static route to wlan to wan?

  The routing of the generated RV180 table

  Destination	Entry door	Genmask	Metric	REF	Use	Interface	Type	Flags
  127.0.0.1	127.0.0.1	255.255.255.255	1	0	0	Lo	Static	Upward, gateway, host
  172.16.0.0	0.0.0.0	255.255.254.0	0	0	0	BDG1	Dynamics	UPWARD
  85.0.84.0	0.0.0.0	255.255.252.0	0	0	0	eth1	Dynamics	UPWARD
  127.0.0.0	0.0.0.0	255.0.0.0	0	0	0	Lo	Dynamics	UPWARD
  0.0.0.0	85.0.84.1	0.0.0.0	0	0	0	eth1	Dynamics	Upward, gateway

  Hi Pete,.

  I read your case, it seems that the problem is not related. What I am referring is an external AP connected to the RV180W when the wireless is enabled on the RV180W. Devices that connect to the AP will not be able to access the internet. If the radio on the RV180W is turned off, the devices that connect to the AP can connect to internet.

  -Marty

• Since updates to firefox, it is not possible to add a document to my email c Telfort.nl

  Since one of the most recent updates to firefox, it is not possible to add a document to my email address is Telfort.nl
  I checked with Telfort and no problems of this type are known.

  You can check the problems caused by the extension and plugins.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/troubleshooting+plugins

  You can try to delete the mimeTypes.rdf file in the Firefox profile folder to reset all the actions file.

  • http://KB.mozillazine.org/mimetypes.RDF
  • http://KB.mozillazine.org/File_types_and_download_actions#Resetting_download_actions

  You can try to reset Firefox.

  • https://support.Mozilla.org/KB/reset-Firefox-easily-fix-most-problems

  Reset creates a new profile and attempting to import some settings of the old profile, leaving the old profile intact.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile

• Windows 8.1 upgrade is not possible because win 8 is not enabled

  A few months ago, I bought a new laptop of Toshiba Satallite with 8 Windows preinstalled
  Now I want to upgrade Windows 8 to 8.1 Windows. But I don't see the upgrade of Windows 8.1 in Windows store. I think it's because my current installed windows seems not you be activated...

  When I try to activate, I get error: 0xC004F074.
  I found a solution using the command: SLUI 3 and then enter the product key to activate it, but I don't have a product key! There is no sticker with a product key on the laptop.

  Could someone help me with this question, so I can activate my current installation of Windows 8 and upgrade to Windows 8.1?

  Post edited by: mbarten

  Hello

  I had some problems with an upgrade to 8.1 to win in the past...
  Finally, I managed to install the Windows 8.1 update once the laptop has been set back to factory settings.

  I'm not sure if this should be done in your case, but where the 8.1 Win update is not possible after installing all the windows updates, you should reset the PC back to factory settings. After that the upgrade should work.

• Toshiba Wireless Manager - not possible to choose the authentication protocol

  Hello

  I use for my Toshiba Wireless Manager mobile broadband connections. In a connection profile, it is not possible for me to choose what authentication protocol to use. In the Advanced Settings tab, the authentication section is grayed out. Using the program is mentioned that you can change the authentication settings.

  Concerning

  Post edited by: malo

  Hello

  As far as I know to create a new profile.
  Then you could add the APN, user name, password and authentication protocol
  But my knowledge in most of the cases, the SIM card is detected automatically and no manual work is required. If you do not need to choose the authentication protocol

  Welcome them

• Satellite M70-151 - not possible to install new HDD

  Hello

  I have a problem with my Satellite M70-151. bunch of old hard drive (100 GB Hitachi) reached the Windows XP screen then just ends with a blue screen a turn off laptop, immediately. I had to restore my data with an application file-rescue of another PC. It was not possible to start from old hard drive yet.

  Then I bought a Western Digital SATA II 250 GB hard drive that put my Windows XP CD in DVD player installed and tried to start. The laptop turns off as soon as the laptop computer tried to access the HARD disk.
  Thought, it was question of SATA II disk and tried a Samsung 160 GB Sata I - same result.

  BIOS recognizes the correct drives.

  If I try to boot from old hard drive, it shows the issue I mentioned first, but as before it reaches the Windows XP Boot screen before moving on to the blue screen before turning off the laptop. So start goes further than the boot with new hard drives

  The Windows XP CD I used is not the restore CD that came with the laptop, but a normal license.

  The heat is not a problem, I cleaned the CPU fan there is enough space to breathe the cold air mobile, the temperature is ok.

  * My questions are: *.

  Is there any special application running on laptops satellite, like special software of Toshiba, perhaps Backup, should I be aware of?
  What I need to preformat the hard drive, Toshiba-Hardware will recognize the hard drive?

  It would be great to get help on this issue, because I'm out of ideas. Thanks in advance!

  André

  Hello Andrew

  This behavior is very strange. I have some old Satellite M70-159 with 100 GB HARD drive. I also tested how it will work with a 250 GB HARD drive and all is well.
  On two drives, I have installed WXP using the Toshiba recovery image.

  I answer your two questions No. to install Windows XP Home edition on this model of laptop you don't need some special Toshiba application or a piece of software.
  HDD should be recognized correctly by the BIOS and the Windows XP Home edition installation procedure should work well.
  What you can try is to set the BIOS to the default settings and try again.

  The strange thing for me is that judgment. The blue screen tells me that there may be some serious hardware problem, the HARD drive controller might be. It's really not easy to say with certainty what can be the problem.

• Satellite A660 - 11 M - drive HARD recovery is not possible

  Hello.

  I bought the satellite A660 - 11 M two months ago. A week before, he started to cause a problem that when turned on, boot HARD drive is not possible in the first place and boot priority option page is shown. Only after that I have reset a start command, it started.

  To resolve this issue for good, I decided to format the HARD drive using the HDD recovery procedure. Unfortunately, I had to cancel this procedure after 2 minutes, and the start-up is not possible at all since then. He continues to display the message "Boot failure" etc. and staging to the BIOS screen. So, I can not access the recovery procedure even if I keep the F8 key. I am afraid that a recovery on the HARD drive partition can have been damaged due to the forced cancellation.

  I have not created a DVD of my own laptop recovery, and the only option seems to buy one from Toshiba (https://backupmedia.toshiba.eu/landing.aspx). Before you order a recovery disc, I would ask if my problem can be solved using the disc. Anyone who has experience with the recovery disc could advise me? Another question is to know if a standard warranty let me send to Toshiba ASP? Thank you for reading.

  Hello

  > Another question is to know if a standard warranty let me send to Toshiba ASP?
  Warranty only covers hardware issues.

  Question you seems to be related to a software problem.
  Therefore, I doubt that installation of the OS would be covered by the warranty.
  You should order the recovery disk and must attempt to define the notebook back to factory settings.
  Then you should check the features of the laptop.

  Good luck

• Qosimo G20-127: no sound when the TV in MCE

  my laptop is Qosimo G20-127. I have a problem. There is no sound on the tv. There is a picture but no sound. Windows media center is the operating system. Everything under MCE works well and it is solid under other applications, but not when I'm watching TV.

  Help, please

  Hello

  I presume that some sounds is set to mute option. Please check the first volume control. I guess you are using a standard antenna in the port and that he cannot imagine that the audio signal is not there.

  If you find what is the problem please let us know.

• BitLocker in Vista 32 bit Ultimate activation is not possible on Tecra M4

  It of not possible to enable BitLocker with my Tecra M4 Bios 3-50 and TPM 3.00.

  BitLocker TPM error message not found. Technical Library Microsoft says Vista SP1 has TPM V1.2 for install. In Toshibas Read Me in Pakcke 3.00.1178.00 of the update is displayed V1.2 and possible Bitlocker with this package. But Infinion administrator

  Parametriesierungstoll displays only the TPM 1.1 and the selftest passed ok, but BitLocker find no TPM.
  What should do? Thanks for help.

  Need for BitLocker TPM v1.2

  The M4 has only v1.1, you will need to disable the TPM and to do this:

  http://www.vistaclues.com/enable-BitLocker-without-a-TPM/

  Vista tells you he needs a module of TPM for BitLocker, but it happens. To enable BitLocker without a TPM, follow these steps:

  1. open the Group Policy Editor by clicking on start, type gpedit.msc, and then press ENTER.

  2. navigate to computer BitLocker Drive Windows\Chiffrement userconfiguration\administrative ordinateur\modeles.

  3. double-click on Control Panel settings: activate the Advanced Boot Options.

  4. click on activate. Then, select the allow BitLocker without a Compatible TPM check box.

  Click - allow - bitlocker.png

  5. click on OK.

• Not possible to change the boot order in the BIOS on Satellite satellite A10-403D

  I want to be able to boot from CD or USB STICK at first upward, but in the BIOS, it is not possible to change the boot sequence...

  Thank you for helping me! :)

  Hello Susan

  It will be interesting to know what model of laptop you have. By the description of the problem, it is always useful to know the exact model of laptop.

  When you turn off your laptop, press F12 and let us know exactly what is happening. By the way: can you explain what happen when you try to change the boot order in the BIOS settings?

• (95%) FAILED: Could not find the system volume, reconfiguration is not possible.

  Hello

  I'm trying to virtualize a physical machine to my VMware infrastructure. I success to another machine, but this time it crashes.

  Here are the features:

  Software: Client VMware Converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise with Exchange 2003 SP1

  Disks: 2 * 80 GB drives used in RAID 1 software mirror (2 partitions C: & D: cross the two discs)

  VMware farm: ESXi 4.1

  Configuration of the converter: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95 per cent at the stage of reconfiguration (he create only a single vmdk).

  My research, it is likely due to software mirror, implying to dynamic disks.

  But I must not modify the physical machine, I have to migrate the computer because it is unchanged.

  A machine appears in vCenter. When I started it, it does not start. With QParted, I activated the flag of "boot". Now the machine starts, but I immediately get a blue screen even in safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I've added the vmdk to another machine, and run diskmgmt.msc to convert dynamic disk to basic disk, but he saw disc base already.

  Initial configuration of the drives here: http://image.bayimg.com/eaacoaadc.jpg

  Attached files: boot.ini and newspapers

  What can I do to convert my machine?

  Thank you and sorry for my English

  =====================================================================================================

  Hello

  I try to virtualize a physical machine to my VMware infrastructure. I successful already have to pay another machine, but it it crashes.

  Here are the features:

  Software: Client VMware converter standalone 4.0.1

  Machine: Microsoft Windows Server 2003 Enterprise SP1 with Exchange 2003

  Disks: 2 80 GB drives used software mirror RAID 1 (2 partitions C: and D: cross on two discs)

  VMware farm: ESXi 4.1

  Conversion of configuration: http://image.bayimg.com/faackaadc.jpg

  I try to convert the machine but I get the following message "FAILED: could not find the system volume, reconfiguration is not possible." 95%, stage of Reconfiguration (it has created only a single vmdk).

  According to my research, it is probably due to the software mirror, which created from dynamic disks.

  Alternatively, in I am not touching the physical machine, I have to migrate the machine what without changing.

  A machine appears well in vCenter, when I start, it does not start. With QParted I activated the 'boot' flag The machine boot now, but I get a blue screen immediately, same en safe mode. ( http://image.bayimg.com/faacaaadc.jpg )

  I added the vmdk on another machine, with diskmgmt.msc I wanted to convert the dynamic disk to basic disk, but he was already seen as a basic disk.

  Here is the initial configuration of the discs: http://image.bayimg.com/eaacoaadc.jpg

  What can I do pour machine to convert my?

  Thank you

  Have you tried

  Try the option "set up the machine" of the converter against the vmx file that you already have.
  
  _________________________

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• Arc1: Don't check-in not possible: no primary destination

  Hello
  
  I am getting following error in my alert.log to Datbase 10.1 on Windows 2003
  
  Wed Dec 08 11:50:04 2010
  Arc1: Evaluating archive log 3 thread 1 sequence 3
  Arc1: Don't check-in not possible: no primary destination
  Arc1: Impossible to archive log 3 thread 1 sequence 3 (4)
  Wed Dec 08 11:50:04 2010
  Errors in the c:\oracle\product\10.1.0\admin\dmsdb\bdump\dmsdb_arc1_2172.trc file:
  ORA-16014: 3 log sequence # 3 not archived, no available destinations
  ORA-00312: wire 3 1 online journal: ' E:\ORADATA\DMSDB\REDO03. JOURNAL"
  
  How can I see this file ' E:\ORADATA\DMSDB\REDO03. NEWSPAPER "is available on the hard disk:"
  
  
  Microsoft Windows [Version 5.2.3790]
  Copyright (C) 1985-2003 Microsoft Corp.
  
  C:\Documents and Settings\Administrateur > dir E:\ORADATA\DMSDB\REDO03. JOURNAL
  Volume in drive E is new Volume
  Volume serial number is a 640 - 8421
  
  Directory of E:\ORADATA\DMSDB
  
  08/12/2010 11:48 REDO03 10,486,272. JOURNAL
  1 file (s) 10,486,272 bytes
  0 103,370,887,168 dir bytes free
  
  
  
  I think it's because of the error/bad hard drive sector.
  
  Now how can I get rid of this error?
  
  Habib

  This isn't space related error
  ORA-00333
  make the error reading block rope County journal
  Cause: An I/o error occurred while reading the newspaper describes the error that accompanies it.
  Action: Restore access to the file, or get another copy of the file.
  Try

  sqlplus "/as sysdba"
  alter database clear unarchived logfile group 3;
  alter system switch logfile;
  

• IOS screenshot 10.0.2 - not possible

  Since updating to IOS 10, its not possible to make a screenshot using the home and power button.

  Someone at - it a solution for this problem?

  Thank you

  Rainer

  It works in the same way he has always done on my iPhone 6. Try to restart your phone and try again.