Any significance to the folder names?

Similar Questions

• Try to copy a folder with subfolders, some don't copy, get the message that the folder names are too long under Windows 7

  Hi, when you try to copy a folder with lots of subfolders, some files don't copy.  I get a message that the folder names are too long, and the only option is to ignore these files.  Anyone know the maximum folder (and also) name length that will copy windows 7?

  Thank you

  Steve M

  Hello
   
   
  a. What are the data you're trying to move?
  b. what operating system (for example Windows files) files?
  c. What is the method that you use to copy data?
   
   
  Windows 7 supports filename up to 260 characters. I would ask you to decrease the characters in the file name and then try to copy the files.
  
  Let us, run disk checking hard disk utility and then check.
  Here's how:
  1. open the computer by clicking the Start button, click computer.
  2. click on the drive you want to check, and then click Properties.
  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will be a problem, but not to fix them.
  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.
  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.
  4. click on start.
   
   
  Depending on the size of your drive, it may take several minutes. For best results, do not use your computer for any other tasks while it checks errors.
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The folder name does not appear in the folder

  I have several folders under my pictures. They use to show images of four in front of the folder and the name of the folder below. Now all they show are four pictures at the edge of the record. How can I make the folder under the folder name?

  I have several folders under my pictures. They use to show images of four in front of the folder and the name of the folder below. Now all they show are four pictures at the edge of the record. How can I make the folder under the folder name?

  ===================================
  Try the following steps:

  Open your folder to display thumbnails.

  Click on the button display and change the display
  thumbnails in the list.

  Hold down the SHIFT key, click the show icon the
  and change the view in the thumbnails.

  The photos will be displayed and the name of
  the file must be under each.

  Do the same for your folder view.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Prefixing 'My' in front of the folder names, Explorer causing bad paths

  I have an external hard drive with three folders and seen in the Windows Explorer, they are named 'Documents', 'My Music' and 'pictures '. After that WMP began failing to find the music on my drive, I removed and added the folder to my library and noticed the road now omitted the 'ma' - 'H:\Music '. Of course, a list of dir in a command window shows not 'My' in front of one of these folders.

  What is the problem? These are not associated with my current user account, but is there some other baggage that makes the names are not displayed correctly? Any suggestion why the Documents folder is not affected in the same way? It has already forced me to recharge my library of music once - should I just change names from folder to something like "Musik" so that Windows don't screw with it?

  Hi pdizzle,

  I suggest you rename the files to my music etc. on the disc.

  If the problem persists then I suggest you scan the computer for malware infections or viruses and remove all infections, check if it helps.

  The scan below only works on the 32-bit version of Windows

  http://OneCare.live.com/site/en-us/default.htm

  You can use the Microsoft security essentials to scan your computer

  http://www.Microsoft.com/security_essentials/

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The list of virtual machines, data warehouses and the folder name by cluster

  
  Hello!!  I hope someone can help me with a PowerCLI script that can pull the info from the object into a file, txt or csv.  In order to get our environment cleaned before our next year Dr. with MRS, I want a list showing each VM and the data store (s) in that it is the name of the folder in the virtual computers view and models.  We keep our VMs organized by creating folder names that correspond to the application running on the virtual machine.  I mention a SRM than last year because our protected groups matched groups of our table of 3PAR Rcopy.  However, we have added over 200 new virtual machines from this era and the members of my team essentially placed these new virtual machines on the first available data store that had enough free space.  Unfortunately, we are not using storage profiles... it's scheduled for next year.

  Information extracted would look like the following:

  ServerName Datastore folder name

  Server1 LUN0 ActiveDirectory

  Server2 LUN0 ActiveDirectory

  Serveur3 LUN1 ActiveDirectory

  Server4 LUN3 Argo

  Server5 LUN7 Argo

  LUN6 Lockbox Server6

  LUN5 Lockbox Server7

  Serveur8 LUN9 Citrix

  etc...

  Any help with the extraction of this info from vCenter would be greatly appreciated.

  Thank you

  Charles

  You can redirect the results to a CSV file, for example

  Get-VM |Select Name,@{N="Datastore";E={[string]::Join(',',(Get-Datastore -Id $_.DatastoreIdList | Select -ExpandProperty Name))}},@{N="Folder";E={$_.Folder.Name}} |Export-Csv C:\report.csv -NoTypeInformation -UseCulture
  

• The Acrobat 9 batch - get PDF files of the folder names?

  Hello

  Can someone give me an example with the use of batch (when the value of a specific folder/files) for a list of the names of files in this folder? I was not able to find examples online. It does not seem be any batch built in sequences that automatically do so I guess it will have to be done with javascript?

  In the end, I need to automate a process (I was hoping to create a batch sequence to do this) which will allow me to invite a user to choose a record source to PDF files and then based on this selection, run a Javascript that I create, which will merge all of the PDF files in this folder into a new PDF apply some culture settings to each page, and then ask the user where to save the merged PDF file?

  Has anyone ever done something like this? I'd love to see an example of how this could be able to achieve.

  Thanks in advance.

  Have you tried to create a batch process to test (now called 'Actions')?  Actions in Acrobat 10 has the 'Merge all the files in the folder' option, and batching in previous versions has always included a commad culture page, but also an option to ask the user where to save the file.

  There are many examples and articles on this topic at http://www.acrobatusers.com

  Thom Parker
  The source for PDF Scripting Info
  pdfscripting.com

  The Acrobat JavaScript Reference, use it early and often

  Then more important JavaScript development tool in Acrobat
  The Console window (video tutorial)
  The Console Window (article)

• Error file compressed (zipped) folder is invalid when the folder name and the location is OK

  I have a folder zipped on my computer which has 2.84 MB of data in it.  I can access the folder and check the properties of it using windows Explorer.  But when I try to open the file, I get the message "windows cannot open the folder.  "The compressed (zipped) folder [the name of the location and file names] is not valid.  Why this file is not valid.  The name and the location is OK?  Why I can't access this folder?  I tried the extrace all files option and tap of properties has the file open by windows Explorer (which opens at all other files zipped, I downloaded).

  Hi Bill,

  Thanks for choosing Windows Vista Forums.

  Have you tried re - download the file and open it?

  The file may not have been packed correctly so, make sure that you re - compress the file and open.

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• deletion of history for the folder name

  In a folder at the bottom of the page is the file name bar... I open it and it shows what I saw before... What should I do to remove what I saw here?

  Hi postmanspbs,

  If you want to delete the previously displayed you can access this location C > users > user account (select the user account you want to remove the files previously posted) > Recent.

  Open the new folder and remove all the content.

  OR

  You can also follow these steps:

  1. Open properties of the Start Menu by clicking the Start button, clicking Control Panel, appearance and personalization, then clicking on the taskbar and Start Menuand the taskbar.
  2. Click the Start Menu tab and, under Privacy, select the checkbox store and display a list of recently opened files so that it is checked. This will add recent items on the start menu. To remove recent items on the start menu, clear the checkbox store and display a list of recently opened files .

  Add or remove recent items on the start menu

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-recent-items-on-the-start-menu

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

  I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

  "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

  If the solution IS identical to that of Vista, the instructions on the following link apply?
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Yes, the solution is identical to that of Vista, and apply the instructions at this link.

  Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.

• Text color for the folder name

  I use Windows 7 and I want to change the font color of the text for folder names. Can anyone help?

  Hi Peter,.

  Unfortunately, you cannot change the color of the font of the text in the file. You can use your favorite search engine to find the third-party software that supports this feature.

  Disclaimer of third party application:

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Use of third party software is at your own risk.

• How you can display the details-the folder name, the date, labels, size, type when displaying folders as large icons?

  Windows 7
  How you can view the records/document details-name, date, tags, size, good guy that watching a records/documents too large, medium or small icons?
  I have to be able to sort the records/documents while in the large, medium or small icon view I have in Vista. I can't settle unless I'm in the Details view. I work with graphics mostly, so I need to see while I sort.

  Even if the headers are not visible, you can sort/filter/group by those details by right-clicking on an empty spot in the folder and choose the fate/group that made a right click menu.

  Your preference of sort/group will remember your next visit this folder.  For more information on how to apply your preferences of sorting/grouping of all records at once, try my tip at http://skeene.net/tech/apply-folder-styles-to-all-subfolders/

• Add the folder names in the path of the image as keywords separated from image metadata

  Hi all, I tried to find a solution online and customize the amazing Paul Riggott script, but I'm not able to make it work the way I need.

  I have my customer images organized in the structure of folders and subfolders. For all images (thousands of files in the subfolders a lot) I need a script for Adobe Bridge to take all the way from the image, separated from individual files paths file and store these records in the form of keywords separated in the metadata of the image.

  For example, I have the image.jpg/Work/Job01/share/Photos and image B.jpg file in the folder/Work/Job02/PartB/Photos. After I run the script from Adobe Bridge on file/work, I want to have for the two added images keywords

  Size: Work; Job01; Share; Photos

  Notice: Work; Job02; PartB; Photos

  As 'Work' and 'Pictures' folders are usually present, it would be nice to have the opportunity to put these two exact strings in script and exclude keywords added, but it is not necessary :-)

  The bellows of script adds one keyword ~photos/Work/Job01/share/Photos, for what is necessary is to divide and make key words separated substrings. This would allow me to move pictures anywhere and still be able to filter as a group structure (as number of employment, or part name).

  Please, could someone show me how to update this script? Or is there another solution that I just haven't found yet?

  Thank you, Petr

  // ADOBE BRIDGE SCRIPT // PUT FOLDER NAMES TO IPTC KEYWORDS
  // from Paul Riggott Script, May 12, 2011 12:23 PM (in response to JSG_Alex_B)
  // https://forums.adobe.com/thread/656144
  #target bridge   
    if( BridgeTalk.appName == "bridge" ) {   
  AddFolderNameToMeta = MenuElement.create("command", "Add folder names as keywords", "at the end of Tools"); 
  } 
  AddFolderNameToMeta.onSelect = function () { 
    addFolderName(); 
    } 
  function addFolderName(){ 
  var folders =[]; 
  var Pics=0; 
  folders = FindAllFolders(Folder(app.document.presentationPath), folders); 
  folders.unshift(Folder(app.document.presentationPath)); 
  for(var a in folders){ 
    var PictureFiles = folders[a].getFiles(/\.(jpg|jpe|jpeg|gif|eps|dng|bmp|tif|tiff|psd|rle|dib|cin|dpx|sct|pbm|flm|psb|exr|pcx|pdp|nef|dcr|dc2|erf|raf|orf|tga|mrw|mos|srf|pic|pct|pxr|pdd|pef|png|x3f|raw)$/i); 
  for(var p in PictureFiles){ 
      addKeyword(PictureFiles[p]) 
      Pics++; 
      } 
  } 
  alert("Number of Folders Processed = "+folders.length+ " Documents Processed = "+Pics); 
  function addKeyword(fileName){ 
  if (ExternalObject.AdobeXMPScript == undefined)  ExternalObject.AdobeXMPScript = new ExternalObject("lib:AdobeXMPScript"); 
  var thumb = new Thumbnail(fileName); 
  // I need somehow to make substrings from path to separate individual folder subfolder names and add these as separate keywords
  var folderName = decodeURI(fileName.path).replace(new RegExp(/\\/g),';'); 
    if(thumb.hasMetadata){ 
        var selectedFile = thumb.spec;   
        try{ 
        var myXmpFile = new XMPFile( selectedFile.fsName, XMPConst.UNKNOWN, XMPConst.OPEN_FOR_UPDATE); 
    var myXmp = myXmpFile.getXMP(); 
          var keys = getArrayItems(XMPConst.NS_DC,'subject'); 
          keys.unshift(folderName); 
          keys= ReturnUniqueSortedList(keys); 
          myXmp.deleteProperty(XMPConst.NS_DC,'subject'); 
          for(var z in keys){ 
          myXmp.appendArrayItem(XMPConst.NS_DC, "subject", keys[z], 0,XMPConst.PROP_IS_ARRAY); 
          } 
          }catch(e){} 
  if (myXmpFile.canPutXMP(myXmp)) { 
          myXmpFile.putXMP(myXmp); 
          myXmpFile.closeFile(XMPConst.CLOSE_UPDATE_SAFELY); 
          } 
  } 
  function getArrayItems(ns, prop){ 
  var arrItem=[]; 
  var items = myXmp.countArrayItems(ns, prop); 
    for(var i = 1;i <= items;i++){ 
      arrItem.push(myXmp.getArrayItem(ns, prop, i)); 
                  } 
  return arrItem; 
  } 
  }; 
  function FindAllFolders( srcFolderStr, destArray) { 
  var fileFolderArray = Folder( srcFolderStr ).getFiles(); 
  for ( var i = 0; i < fileFolderArray.length; i++ ) { 
    var fileFoldObj = fileFolderArray[i]; 
    if ( fileFoldObj instanceof File ) {   
    } else { 
          destArray.push( Folder(fileFoldObj) ); 
    FindAllFolders( fileFoldObj.toString(), destArray ); 
    } 
  } 
  return destArray; 
  } 
  function ReturnUniqueSortedList(ArrayName){ 
  var unduped = new Object; 
  for (var i = 0; i < ArrayName.length; i++) {   
  unduped[ArrayName[i]] = ArrayName[i]; 
  } 
  var uniques = new Array;for (var k in unduped) { 
    uniques.push(unduped[k]); 
    } 
  uniques.sort(); 
  return uniques; 
  } 
  }; 
  
  

  The only other option that I know uses ExifTool:

  Help by adding information of path as keywords

• Pick the folder names!

  Hey! I want to enter a folder name using flex. It is the only file in its parent folder. This result I'll add code to access the files inside this folder. Help, please!

  var file:File = new File(...);
  var contents:Array = file.getDirectoryListing();
  for each (var f:File in contents)
  {
      if(f.isDirectory)
      {
          trace("Bingo Bango!");
      }
  }
  

• the folder names will not appear on my xp photos

  The folders in my xp images are missing their names. How to fix this. Thank you

  Found it on my own it was on bing.

  If you want the file name or the drive is displayed in the thumbnail view just hold down the SHIFT key on your keyboard, then open my computer. He explains the link below.

  http://winonline.blogspot.com/2005/...

  See also the #2 response in the thread in the link below.

  http://www.computing.net/answers/wi...

• Run as administrator does not not for files bat inside the folder names with special characters such as)

  Dear all,
  I am unable to run any file beats with "Run As Administrator" when the bat file is present in a folder that has (in his name.
  For example: I main.bat in d:\test (_8july) \main.bat.
  The content of main.bat is like that.

  c:\windows\system32\cmd.exe /C "e:\test.bat."

  The content of test.bat is like this:

  echo 'test' > %temp%/test.txt
  pause

  If I double-click main.bat, I can see the file text.txt being created and 'test' written in it.
  If I click with the right button on main.bat and select 'Run as administrator', cannot run the file beats and I get the error "d:\test" is not a recognized command.
  How to handle these situations?

  If I run as c:\windows\system32\cmd.exe /C 'd:\test (_8july) \main.bat' to 'Run' in Start menu cannot run little. It gives the same error "d:\test" is not a recognized command.
  If I run as c:\windows\system32\cmd.exe /C "" d:\test (_8july) \main.bat"" it can work and works very well.
  So, the question is when we choose 'Run as Administrator', it takes the file bat as insead "d:\test (_8july) \main.bat" of ""d:\test (_8july) \main.bat" is there a work around for UAC, we can pass the correct string

  Thanks in advance
  Rambeau

  Hi Raghu,

  Your question of Windows is more complex than what is generally answered in the answers from Microsoft Windows Vista forums. It is better suited for the IT Pro TechNet public. Please ask a question in theForums of Scripting on TechNet

  Visit our Microsoft answers feedback Forum and let us know what you think.