Configuration sample-app application server-side

Similar Questions

• Why the configuration application server is locked?

  Why configure the Web app server is locked? ... Why not click on to open it...

  Hi aqeelfarooq96,

  Make sure the system Web server OR runs in your Windows Services.

  ' Control panel' administrative tools ' Services

  If the Web server of the system NOR work then you will not be able to configure the Web application server.

• Print file .rep directly on the printer, configure the application server

  Hello

  I spent several hours on this forum and unfortunately not found a solution yet so hoping someone has an idea that can help me solve this problem.

  Using forms/States of oracle 11g with a linux application server, we develop on windows machines. Printing reports using compiled .rep files.

  We have a network printer sharing (HP) that is configured on the application server, and we can print on the correct printer directly on the application server.

  Problem is when I try to print a report when executing the forms of oracle on my machine of development directly to the printer.

  I tried:

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_destype, printer);

  SET_REPORT_OBJECT_PROPERTY (l_repid, report_desname, 'APPSERVER_PRINTER_NAME');

  When I put the report_desformat in 'pdf' format I can see the reports to enter the print queue, but they do not reach a 'State' order ' print file empty. "

  When I remove report_desformat, he sends in eps and as I understand it, it prints, but with bad formatting (I work remotely and run by what their colleagues say.)

  CUPS 1.4.2 reference printer queue tab.
  

  The report generates in the browser if I change the destype to produce and use web_show_document to display it as we usually do.
  

  
  

  I understand there are solutions using a java bean or involving the installation of the software on the client computer, but my employer is unwilling to go to that direction. We have only a handful of reports that require the ability to print directly to the printer.

  
  

  That someone has an idea of what the problem might be or help provide additional steps, I can take to solve problems? I have no idea how to do to configure printers, our IT Department managed this and they say, it's good so I don't know if there is a problem with what I'm doing or there was something installation related rate with this network printer.

  
  

  Thanks in advanced for any assistance!

  I have given up trying to use a report_desformat of pdf and paste it with the default value of the eps, after review, it seems pretty close match that generates pdf format and despite the fact that the queue on the application server throws a misprint even with the eps format it actually always draws for the good enough for now. Would be nice to know what happened here, but the problem has been resolved.

• server-side code please

  Hi all

  Y at - it applications server-side with java, I need a code example please

  Yes, if you download the Push Service SDK there is the Java source code for the sample application on the server side. Of course he uses the SDK API that hide the details raw, but it shows you how to start building a server push sample application using the SDK side

• mechanism between DB and application server

  Hello
  
  Currently I have installed R12.1.3 ebs and DB under 11.1.0.7 upgrade to 11.2.0.2.
  When upgrading the database server, I have a question how application server detects the database server.
  The question may seem a little silly, but that's how it is. :)
  For example, when DB is upgraded, upgrade, configuration and post activities are explained on side DB in the documents.
  But then, how the database server to find application after the installation of new DB?
  It works based on the updated file listener only...?
  Or is there a configuration that must be done application server side as well after the DB is upgraded?
  
  Can someone help with my questions...?
  
  Thank you

  Hello
  > It works based on the updated file listener only...?
  Definitely, it will use the earpiece to connect with the db.

  During the upgrade, you create appsutl.zip and copy this to the level of the database and run the automatic configuration service. It's that time where the link is established.

  Thank you

• Install PeopleTools 8,53 Linux question: Start Application Server domain PT853 using psadmin

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5.

  I address the issue of startup Application Server Domain PT853 while the database server is listening as below:

  [user@userlinux PT8.53] $. ./Psconfig.sh
  [user@userlinux appserv] $ export SYSTEM_PASS = SYS/SYS
  [user@userlinux appserv] $ export ORACLE_HOME = / home/user/OracleDB_Home
  [user@userlinux appserv] $ export ORACLE_SID = PT853
  [user@userlinux appserv] $ export TUXDIR = / home/user/Oracle/Middleware/tuxedo11gR1
  [user@userlinux appserv] $ export LD_LIBRARY_PATH = $TUXDIR/lib: $LD_LIBRARY_PATH
  [user@userlinux appserv] $ export PATH = $TUXDIR/bin: $PATH

  
  [user@userlinux appserv] $. / psadmin

  Its release gets 2-errors in the current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0919.LOG as below:

  First of all, GenMessageBox (200, 0, M): PS General SQL Routines: version SQL library libpsora64 missing or invalid (200.0)
  Second, GenMessageBox (0, 0, M): Signon database: could not sign database PT853 with user PSADMIN.

  
  I create a symlink in/home/user/OracleDB_Home/lib and /lib32 as below:

  [lib user@userlinux] $ ln-s libclntsh.so.11.1 libclntsh.so.8.0
  [user@userlinux lib32] $ ln-s libclntsh.so.11.1 libclntsh.so.8.0

  After that, I run. / psadmin to begin the field PT853 again, I see the first error is resolved. Now, there is that a single error in the current server log file /home/user/psft/pt/8.53/appserv/PT853/LOGS/APPSRV_0924.LOG is below:

  GenMessageBox (0, 0, M): Signon database: invalid user or password database signon ID. (id = MyOwnerName)
  Start the server failed

  
  I changed the UserId as PSADMIN in Configuration file, purge the cache and clean restart and resources of the CPI. Password is correct. But the error still shows id = MyOwnerName.

  Application Designer to connect as PSADMIN successfully. Data Mover Bootstrap connect as MyOwnerName successfully.

  My question is:

  Why PSADMIN both MyOwnerName the ID invalid user or password database signon? How to solve the problem?

  
  Thank you.

  As stated in the installation manual, there are a few prerequisites in chapter CHAPTER 8 b page 238 UNIX application server configuration

  Prerequisites

  Before you begin this procedure, you should have completed the following tasks:

  • Installed your application server.

  See "Using the installer of PeopleSoft," understanding PeopleSoft servers

  • Tuxedo installed 11 GR 1 material

  See "installing additional components.

  • Authorization to a PeopleSoft user ID to start the application server.

  The database configuration process includes a step to set up the ID of the user with permission to start

  the application server. See the installation instructions specific to the application for more information on user IDS

  for your PeopleSoft application. See the PeopleTools: product documentation Security Administration

  For more information on PeopleSoft PeopleTools sent user profiles.

  See "Creating a database under UNIX," execution of the database Configuration Wizard.

  See "creating a database manually ,"creation of Scripts to Import Data Mover. "

  • Run the following SQL statements on your database server to review and if necessary, update the PSCLASSDEFN table:

  SELECT THE CLASSID, PSCLASSDEFN STARTAPPSERVER

  WHERE CLASSID IN (SELECT OPRCLASS FROM PSOPRCLS WHERE OPRID ='');

  UPDATE PSCLASSDEFN SET STARTAPPSERVER = 1 WHERE CLASSID ='';

  Novel installers generally use VP1 or PS to test the application server. If these users are deleted or their

  Passwords are changed, the application server will be unavailable. To avoid this problem, you can set

  until a new operator (called PSADMIN or PSASID, for example) with privileges to start the application server.

  If you do this, you can use the operator new for your servers and you will not need to change the

  password each time VP1 or PS.

  You user has privileges to start the application server.

  Also pay attention to the connectid configuration in the application server. This should be the same connectid and the password you provided during the database creation script connect.sql

• Push BlackBerry: Application accessories server-side

  Hi all

  I want to know the application requirements on the server side.

  1. I have a few Notifications in my application.
  2. My application to retrieve some webservices data after a specific interval or manual traction (update).
  3. These data are in the form of JSON, I have to analyze and then use it to display the notification to my application.
  4. Now, if I change the 'Blackberry Push Notifications' draw, what changes should I make to the coast server.
  5. If I'm right, I'll have to make an application Java server-side. Besides, this application will contact My Web services to extract the required data. After obtaining the data, this application will push data (along the device PIN who need push Notification to be sent) PPG by configuring Push service SDK.

  "Please erase me if I'm wrong.."

  
  

  Uptill I did :

  1. I'm registered for Push Notification by completing the evaluation form to push Blackberry. And waiting for response from the RIM.
  2. Downloaded the SDK of Service Push v1.1.0 and installed successfully.

  as I have already said, push a short message and allow the client to remove the data.
  Push is to inform, not necessarily to put all the data on the device.

• Application server configuration

  I'm putting in place the ATG app on my machine.

  I have installation 11.1 ATG with app server Weblogic 12.1.3.0. While the implementation of ICD I am error ' invalid Weblogic version: 12.1.3.0.0 taken in charge: [12.1.2] '

  Document is saying something like:

  When you install an application server, you can install a supported version and a version that is not supported by permit. Application server configurations are found at /atg/cim/productconfig/
appserver/SupportedApplicationServer.properties .
  

  [ Oracle ATG trade Web - Application Server Configuration]

  But I am not able to find the file of property mentioned in the record of the ATG.

  Could someone help me solve this problem?

  Thanking in anticipation.

  Hello

  The property file can be found in: CIM\lib\classes.jar\atg\cim\productconfig\appserver

  Please find the reference document for more information below and understand the best, hope that helps you.

  Problem installing Oracle trade 11.1 on Weblogic 12.1.3 (Doc ID 1922316.1)

  Please select a correct answer if this answer solves your problem.

  Thank you & best regards

  Suman Vernoux

• Configure the application server after you change the database

  Dear all,

  We use ORACLE EBS R.12.1.2. Database: 11.1.0.7. 2 RedHat linux servers.

  We are validating failover scenarios keep oracle database data.

  Scenarios is that; We fail on the primary database and primary database role has opted for sleep.

  Should what changes we make on the Application Server?

  Should we change configuration of application server to connect to the new database (name, address of db server... etc). and how?

  Thanks in advance,

  Shareef

  PL see Section 6 in MOS Doc 1545920.1

• Problem with db/server connection in a cluster on the WebLogic application server configuration

  Hi all,

  Maybe someone here has already encountered this problem. I want to deploy and run my application on a cluster (with 2 servers) on WebLogic configuration. All data sources appear to be configured correctly, the application is deployed correctly and that it works correctly, except when a sql query is taken to a specific java class (DataGridService) that handles the results grid search.

  It displays the following error:

  MDatagrid: query: select * xxxxxx WHERE (xxxx) {'success': false, 'id': messageType '',' ': "ERROR", "messageFunction": "Sql Error", 'messageDescription' ': 'java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1211_WLStub cannot be cast to oracle.jdbc.OracleConnection',' iconMessage":"Ext.MessageBox.ERROR","buttonMessage":"Ext.MessageBox.OK","msgTitle":"System Error!"}

  As I said, all sources of data in the console of wl appear to be correctly configured with the option "Not packaged data items of Type" not selected. All other connection db work correctly but there is a problem only with this particular class and with the cluster configuration, in fact it works correctly on a stitching configuration. In this case, the same problem occurs if 'Objects of Type data not packaged' is selected.

  Maybe there is a problem with a certain configuration of wl. Can someone help us?

  We have just solved the problem: in the properties file, wls.context parameter, we forgot to insert the ip for all servers in the cluster

  for example, cluster with 2 servers

  bad: wls.context=t3://ip-address:7001 (this is the only server admin)

  correct: wls.context=t3://ip address: 7001,ip address: 7002,ip address: 7003 (admin server, Server1 Server2)

• 8.3 tested SP1 configuration JDK for WebLogic Server (application server)

  The base 8.3 had JRockit JDK Sun JDK as well as a tested configuration.

  More late 8.3 SP1 counts Sun JDK as a tested configuration.

  Can someone comment on that. If I decide to deploy SP1 with the latest available patch just 8.3 use Sun's JDK tested for the application server?

  JRockit JDK is supported with P6 EPPM 8.3 SP1 and latest fix. The tested configuration for SP1 and above is an indication that additional certification of the last JDK was made. This does not necessarily mean that you have to upgrade to it, well recommended. Review the SP1 patch readme for more information.

• Install PeopleTools 8,53 Linux question: configure application server using psadmin

  People,

  Hello. I install PeopleTools 8,53 Internet Architecture. Server database is the database Oracle 11 GR 1 material. Operating system is Oracle Linux 5. I installed successfully JDK7, WebLogic Tuxedo 11 GR 1 material and PeopleTools 8,53 10.3.6, in Oracle Linux 5. I've implemented PeopleTools 8,53 Instance of database in Oracle Database Server successfully. Data Mover connection and application designer in the Instance of database successfully. Web Server has been successfully configured.

  Now I face the question about the configuration of application server as below:

  In Windows, I run /PT8.53/appserv/psadmin.exe to create a domain for the Instance of PeopleTools database successfully. On Linux, the file /PT8.53/appserv/psadmin light blue color but is not executable, I try to run it in the following way:

  [user@userlinux appserv] $. / psadmin

  His output:. / psadmin: error while loading shared libraries: libtrio64.so: cannot open shared object file: no such file or directory

  
  My question is:

  Can any folk tell me how to configure the application server using Linux for Architecture Internet PeopleTools psadmin? How to solve the problem above?

  
  Thank you.

  > GenMessageBox(200, 0, M): PS General SQL Routines: version SQL library libpsora64 missing or invalid (200.0)

  What is your platform/wordsize? What is your version of client db/wordsize? All must be 64-bit Linux.

  Nicolas.

• Application has permissions to add/file server-side streams

  I installed the FMS on Linux.  I'm trying to record video from webcam to a flex application and save them server side, to a possible posting to YouTube.

  I installed the 'live' application in the path "record".  In my flex code, I do:

  NC. Connect ("rtmp://ipaddr.us-west-1.compute.amazonaws.com/live/record");

  It connects very well, so I have:

  NS. Publish ("camtest", "record");

  It fails with NetStream.Record.NoAccess.  Server side, he said

  Accepts a connection from IP:xx.xx.xx.xx, sponsor:, pageurl:
  Application does not have permissions to add/file server-side streams; access denied to the camtest stream.

  I have LIVE_DIR in my conf/fms.ini file in/mnt/live.  This directory exists and is writable, so I'm not sure what's going on.  Are there any other permission that I'm missing?  Is it just the wrong application?  That you used for registration of netstream?

  Thank you

  -jsd-

  Hello

  Since you are using the developer version, you should be able to record. Just check the permission of the directory of the application that you created. Make sure you have permission to write to it.

  Thank you

  Abhishek

• Configure Oracle Application Server 10.1.3 GEC

  Hi all
  
  How to install / configure Oracle Forms/Reports service in 10g Application Server 10g Release 3
  
  
  --
  ABK
  
  Published by: Abk on July 8, 2009 13:16

  Please suggest us, can I use 11g application server with clustered for services OC4J & report environment.

  11g has not yet test, and, in any case, I always wait a while before using a new version in production environments...

  At the moment we use the services of forms & States 10.1.2 on two machines in through Web Cache for load balancing, and it works like a charm.

• Application server for the sample application

  I use oc4j instead of tomcat to sample app and assistance?

  You can use any servlet 2.5 JEE container