Any solution for sleep problem on T400

Similar Questions

• Any solution for the problem of license Design suite CS5?

  I installed the Design suite CS5. When I run the app, PSD, ID and AI do not work. error message: problem 213:5 of license. I entered the right app #. You have a solution to this issue?

  Thank you for your help. jfmb

  Error: "License has stopped working". Windows

• My computer shuts down without asking for confirmation. Any solution to this problem?

  I keep my Dell Lap Top on most of the day. Until 3 weeks ago, I never had this problem. The computer turns off spontaneously at random times during the day.  Any solution to this problem?

  The most common cause to stop suddenly a computer is an overheating problem.  Normally, the fan runs faster the CPU heats up.  If you have noticed that your fan runs fast most of the time, that would be your first clue.  Also, if the fan is not spinning, this can also cause overheating. If the fan runs, the most common cause of overheating is an accumulation of dust inside the computer.  You can download the following freeware program which should indicate how hot your CPU becomes:

  Core Temp: <> http://www.alcpu.com/CoreTemp/ >

  If it detects overheating, try blowing compressed air into the vents to loosen and remove dust.

  Suddenly a second cause is problems with the RAM chips in your computer.  Try to run a test on your RAM memory.  Keep in mind that most of the tester memory programs also stress on the CPU, so if overheating is a problem, a RAM test could lead to a stop of overheating as well.

  Windows Memory Diagnostic: http://oca.microsoft.com/en/windiag.asp>

  HTH,
  JW

• When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  When I try to start the computer in the morning, he goes off and after trying to restart the computer 2 times it becomes normal. Please give me any solution for this.

  Hey Abdul HamidNagoor,

  ·         Did you do changes on the computer before the show?

  ·         You get the error message?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  If the problem persists, follow the steps in the article.

  How do I recover from a corrupted registry that prevents Windows XP startup

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• I've got qcad Professional installed but vista will not open save dxf files. I get dxf is not an application valid win 32. Is there any solution for this?

  I've got qcad Professional installed, but vista will not open save dxf files I get a file... dxf is not an application valid win 32.
  Is this a common problem?
  Is there any solution for this?

  You, of course, took umbrage to my last post. For that I apologize, there was no pejorative intention. I am a newbie in the forums and am digging my way along. I have marked your answers answers by mistake, I'll try to fix this.
  I solved the problem, I tried to open files in the Qcad application by clicking on the list of recently used files. It will not work in a new session.
  The correct procedure is:-
  Open click, Qcad - click file - open (this opens the index page of Qcad from the saved files) - click the required file - click Open.
  There is no problem, with the exception of this incompetence of users.
  Thank you for your time and assistance.

• Attach a Nikon D750 in LR 5.7. Is there any solution for this?

  I LT CC and I have no problem with my Nikon D750 of attachment. My girlfriend has however LR 5.7 and it cannot tie his D750. Is there any solution for this?

  Sorry, the answer is simpler, I realized.  Tethering for the D750 has not been added to the LR in version 6.0.  That's all.

  See this list: a list of cameras that can be attached to Lightroom.

• By dictating the long notes, using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  By dictating the long notes on Mac using Siri, Siri will stop as soon as I take a little break. Therefore, the note ends abruptly. Any solution for this?

  For long notes, you are better to use regular old dictation - under Mac OS for a few years now, Siri is not mandatory.

  To activate it, go to "System Preferences"-> keyboard-> dictation. Once enabled, you can press the "Fn" key twice to activate and dictate the long notes in any application.

  Siri is optimized for short, quick things. I don't think that you can change, you just use the method that is better to listen to what you want to do at the time (short notes, using Siri. Long notes, use dictation).

• I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  I have the latest version of Firefox are installed (which has been updated), but the site says that it is the older. Is there a solution for this problem?

  You have a corrupted user agent which identifies you like Firefox/3.0.11

  • Mozilla/5.0 (Windows; U; Windows NT 6.1; UK; RV:1.9.0.11) Gecko/2009060215 Firefox/3.0.11 WebMoney Advisor

  See:

  • https://support.Mozilla.com/kb/websites+or+add-ons+incorrectly+report+incompatible+browser
  • http://KB.mozillazine.org/Resetting_your_useragent_string_to_its_compiled-in_default

• My book pro 15 Mac since April 2014 retina does not work because of problem of logicboard, and without any reason. Fact it is passed to one of you so early? Do you know something about any recall for this problem?

  My book pro 15 Mac since April 2014 retina does not work because of problem of logicboard, and without any reason.  Fact it is passed to one of you so early? Do you know something about any recall for this problem?

  There is no repair program from Apple for any 2014 Mbit/s at the moment.  Have you taken your MBP to a store for a FREE Apple genius bar?

  Ciao.

• I found the solution for the problem of sound-acpi with Satellite P100-219

  Hello

  I found the solution for the problem of sound-acpi with Toshiba P100 (it works with P100-219 at least). I can provide the source modified and compiled table DSDT, but I would like to know if it is possible to get these changes in the next update of the BIOS?

  See you soon,.
  MIK

  Hi Mik

  As you know that it is not possible to find info on the next BIOS, especially if you want to have some information about the Linux operating system. Just wait and see if some forum users pointed out something on the subject.

• Siri does'nt hear me. Is there any solution for this?

  Since installing ios on iPhone 9.2 6 siri does not hear what I'm saying. Is there any solution for this?

  Hello Sergeant Hutton,

  I understand that Siri doesn't seem to be accepting an entry once activated. Fortunately the steps below can help to restore the full functionality of Siri on your iPhone.

  1. Make sure that your iOS device has an Internet connection via Wi - Fi or cellular data.
  2. On your iOS device, make sure that Siri is enabled under settings > general > Siri.
  3. Restart your iPad, iPhone or iPod touch.
  4. On your iOS device, go to settings > general > Siri and turn off Siri. Then turn on again.
  5. Ensure that the microphones on your device are not blocked. For example, if your device has a protection case, remove it.
  6. If you use an iOS device, try to use Siri with headphones. If the works of Siri, get more help with the microphones on your device.
  7. Contact Apple support.

  Use Siri on your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT204389

  See you soon!

• I have a toshiba laptop purchased recently. After the scheduled updates it does not recognize the wireless network. I have to do a system restore. is there a solution for this problem?

  I have a toshiba laptop purchased recently.  After the scheduled updates it does not recognize the wireless network. I have to do a system restore.  is there a solution for this problem?

  Hello

  Make sure you have the latest network adapter drivers fron toshiba

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  and if windows update is at the origin of the problem change how to get updates to uncover the problem update

  When you have found the issue, a right click on it then invited uac then hide

  read the information on the link below

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• When I turn on the system of its display in the moniter as NTLDR missing.please give me the solution for this problem.

  When I turn on the system of his displayiing on the moniter as NTLDR missing. Please give me the solution for this problem

  Hello

  NTLDR is not used for installation of Vista, it's a vestige of WinXP / 2K. If it is listed as "missing", then your boot sector is damaged and must be repaired. The steps are described here: http://support.microsoft.com/default.aspx/kb/927392?p=1

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Premiere Pro is mess up my audio/video synchronization. Use Handbrake really the only solution for this problem?

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files). The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." phone I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  Uses 3rd party freeware really the only solution for this problem? Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  Hi Christafarian,

  Premiere Pro is mess up my audio/video synchronization for the images that I downloaded from my iPhone 6 s + (.) MOV files).

  You wouldn't be the first. I'm sorry.

  The files play fine, but once that I put them in Premiere Pro, the audio falls slowly behind the video, probably to cause "variable frame rate." the phone

  I found:

  • If you pull the iPhone in a well-lit environment, it records at a constant speed.
  • In lighting challenged environments, you get images image variable rate.

  I've seen other threads where people had the same problem, and the universal response, I saw was freeware download called 'Handbrake' to convert the frame rate of variable to fixed... but is not sit right with me.

  For this project, you're probably stuck with transcoding with Handbrake or another method not Adobe. Our coders simply do not handle variable frame rates.

  Uses 3rd party freeware really the only solution for this problem?

  With Premiere Pro and this project, you have no other choice. For future projects, look into purchasing a high end video camera application where you can shoot at a constant rate regardless of the stage lighting.

  Video editing software Adobe Professional-grade not really have the ability to solve this problem? If so, what should I do to prevent all Premiere Pro ruin all my pictures to import?

  If you like Premiere Pro to support variable frame rates, please create a feature request. Otherwise, I hope my tips will help you in the future.

  Thank you
  Kevin

• right to sentences overturned left from left to right in pdf to excel export... you have a solution for this problem?

  I found a problem when converted from pdf to excel in Arabic or Hebrew, it gives me the right sentences overturned left from left to right...

  you have a solution for this problem?

  Known problem (I submitted the bug a few years report - also applies to export to Word, PowerPoint, etc.) for that (unfortunately) there is not yet a date, release or resolution plan.

  -Dov