Any type of server i/o available even after the installation of DSC

Similar Questions

• HP Director launch even after the installation of the updated software. HP Officejet 5510.

  Problem launching HPdirector even after the installation of the updated driver.  Also not scan; message machine wants software installed.  Did not have this right?

  Any ideas?

  [Personal information]

  Hello drudgedread

  Follow the steps below and let me know what happens? These instructions will be clean your temporary folder (a folder that contains temporary data such as data configuration / installation) and rub the printer software with the most recent uninstall.bat utility for your printer.

  First step: clear temp directory
  Type %temp% term or search programs and files of field
  Select all the files in this folder, and then press the delete key to remove. If you receive a message that the file is in use, you will need to ignore this file (s).
  Proceed to step 2 below
  Second step: downloaded and extracted to your system:
  1 download the drivers and full software features
  Complete features Officejet 5510 software
  2. once the download is complete, double-click the file to extract the software.
  3. when the installation window opens, press the Cancel button to stop the installation
  4. tap folder in the race or search programs and files of field
  5. Locate and open the folder starting with 7z (example: 7zS2356)
  6. right click on the folder and select copy
  7. close this window and all open windows, and then in the Middle the desktop right click your mouse and select Paste. This will move the 7z folder on your desktop.
  8 open the 7z, that you just copied on your desktop
  9 open the Util folder
  10 open the CCC folder
  11 start the uninstall_L4
  12. once the uninstall is complete, restart the computer
  13. run disk cleanup from the tools Accessories\ system under all programs folder
  14. download and install the latest version of Adobe flash player
  Adobe Flash Player
  15 open the 7z folder and then double-click the Setup.exe file that will be towards the bottom of the open window. Follow the instructions on the screen to reinstall your printer.

  Let me know if you are able to successfully install the software and driver and are able to print & scan? Also, if there are errors or messages just them down and let me know.

• A33 satellite will not start on the hard drive even after the installation of the new system

  Hello, I need help, my A33 does not start on a hard drive. It is to see the drive hard in the bios and even by operating the drive when you go to install. But as soon as it will boot to the hard drive, it is just a black screen. It is very strange that you can see the hard drive in the bios and even with a diagnostics disk. I can see, scan it and check it by starting with a diagnostic disk, but when I start the computer, it doesn't do anything.

  Help please!

  Stand by. Your ad is so confused. When you read can you understand what you wrote?

  BIOS recognizes the HARD drive correctly, no?
  When you use bootable disk for the installation of the OS is properly recognized HDD?
  You can install OS using the original recovery disc or by using the Microsoft installation disc?

• HP laptop DV1659US (DV1000) - no audio even after the installation of SP35811

  I have Windows Vista 32 bit installed on my HP DV1659US and have no audio.  I tried to install the driver SP35811.exe, but he always comes by saying that it has failed.

  What I am doing wrong?  The deivce Manager puts an exclamation next to an 'unknown device' in the section 'other devices '.  When I click on the 'unknown device' and click on 'details', that's what I get:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_103C30A0 & REV_1000
  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5047 & SUBSYS_103C30A0

  I would like to have sound on this laptop - suggestions?

  Thank you

  Hello:

  It's the correct driver because I unzipped and see the hardware ID for the audio chip that is listed in the file of configuration information.

  So, see if it works...

  Run the file again.  Conclusion of any windows error.

  Go to Device Manager and click on the unknown device with the details that you have posted.

  Click on the driver tab, click on set to update driver. Select the browse my computer for driver software, then select Let Me Pick from a list of drivers for devices on my computer.

  Then select the disk button. Then select the Browse button and navigate to C:\SWSetup\sp35811\wis30B2a and see if the pilot goes like this.

• SFC scan reports sidebar.ini and source file as a corrupted file even after the installation of WIndows Vista repair.

  Hey, I'm Ryan.
  I am running windows vista 32 bit and I get 2 files corrupted when I run SFC - they relate to the windows sidebar (sidebar.ini and store source file is also corrupted). I did a repair installation, and this always happens when I run the SFC.

  1 - is this going to cause any problems to my laptop if I leave it alone?
  2 could it be related to a virus?
  I'm sorry for the questions, but I'm confused as to how this happened... Any help would be appreciated.
  Thank you very much.

  1 NO.

  2 NO.

  This SFC message could be caused by the manufacturer of the computer adding gadgets to the sidebar before installation of Windows for you, or some other change to the sidebar gadgets

  http://www.vistax64.com/general-discussion/219350-sfc-cannot-repair-sidebar-ini-hash-error.html.

  http://support.Microsoft.com/kb/947595

• Windows 7 does not recognize scanner Canon DR - 2580C, even after the installation of the driver

  How can I fix it?

  Hello

  1. deal with any problem with other USB devices?
  2. have you tried to connect the scanner on a different USB Port?

  I suggest you to try the steps and check.

  Method 1: You can run the corner hardware store and check.

  Open the hardware and devices Troubleshooter:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:
  If the problem persists, you can try the procedure described in the link and check.

   

  Working with the scanner and Camera Installation Wizard
  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-scanner-and-Camera-Installation-Wizard

  Method 3:
  If the problem persists, you can select the correct operating system version and try to install the drivers and software provided in the following link:

  http://www.USA.Canon.com/Cusa/support/consumer/scanners/document_scanners/imageformula_dr_2580c_compact_color_scanner#DriversAndSoftware

   

  If the problem persists I suggest you to contact Canon Support.
  http://www.Canon.com/support/

  I hope this information helps!

• Virtual Center shows "60 day trial" even after the installation of the license file?

  The 60 days message disappears after adding the first host?

  go to the main toolbar of vCenterAdministrationVirtualCenter Management Server Configuration - license server.

• I get a warning about the use of an older version, even after the installation of v24.

  Several sites (including Mozilla) Internet gives me a warning about the use of an older version. I am currently on v24 and when I take the advice to be updated simply re - installed v24 yet again, but the expired message does not disappear!

  Thanks report, deleting the file user.js wasn't the first step - please also resets the user agent parameters as described in https://support.mozilla.org/en-US/kb/websites-say-firefox-outdated-or-incompatible#w_firefox-is-showing-the-wrong-user-agent and restart the browser.

• Even after the installation of the fingerprint scanner Scan fingerprint driver does not work

  I have hp pavilion dv6 7012tx and she was pre installed with windows 7, but now I have installed in windows 8 and my fingerprint reader does not work. I have installed finger print driver but its still does not, please help me.

  Thank you!!!

  Hey, I got it to work for me. Read what I posted in another thread

  (page 3) and see if it works for you also.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and-software/HP-J070CA-Windows-8-1-validity-fingerprint-reader/TD-p/3025495/highlight/true/page/3

• Layout error for Sony Picture Package even after the installation of Adobe Flash Player.

  When trying to open Sony Picture Package-message says need to install Macromedia Flash Player.  After you download Adobe Flash Player - always get the same message.

  That you ask for help from Sony at http://www.sony.com/index.php or Adobe http://kb2.adobe.com/cps/414/tn_4149.html and http://www.adobe.com/support/flashplayer/

• I can't get anything to print even after the installation of the new CD of the printer and it says ready but does not print. Printer EPSON Stylus NX400 computer desk is Dell.

  Cannot get from my Dell printer.  I hooked but searching the Web for the installation of the printer comes with nothing.

  Hi Velma Brown,

  I see that you can not print. I'll help you with this problem.

  1. What is the model number of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. What is the exact error you get when you try to print?

  You can download the drivers for the printer Epson here: http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?oid=106004&infoType=Downloads&platform=OSF_W_XP-32

  I suggest you to refer to this article and check if that helps.

  Resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028

  Refer.

  Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-xp&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab4

  I hope this helps.

• Blue screen, even after the installation of updates

  Hello

  I get blue screens several times a day. I took a screenshot

  

  I tried Googling "IRQL_NOT_LESS_THAN_OR_EQUAL_TO" as well as the error "0x0000000a" Looks like a driver is not installed correctly? System log is below:

  

  These blue screens started happening after that windows told me to install the updates. I also tried restoring the system to a previous point, but I kept getting popups to update drivers for windows. The Minidump files are also located here: http://www.filedropper.com/072315-37268-01

  My system information are less than

  

  Two questions

  1 - McAfee will kill network driver

  2 associated with NETw1v64.sys Wireless WiFi Link Drive of Intel Corporation

  I would like to delete McAfee and re - install the driver wifi

  Read all about the update of drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

  

• My superdrive drive don't bed not any type of disc, once I insert it in the drive

  Hi all

  My end 2011 edition iMac doesn't read any type of disc if I insert it in the drive. It automatically rejects the disk after one a wile and then the disc pushes. It allows me not even read the disc. What could be the problem?

  Thank you

  The drive could be faulty, but maybe it's nothing more that a lens is dirty. Lens cleaning products are inexpensive and should give it a shot.

• What reason is there to find my friends send me the mesasge 'Location not available', even though the iPhone, I'll try to find is always on and always is sharing its location with me?

  What reason is there to find my friends send me the mesasge 'Location not available', even though the iPhone, I'll try to find is always on and always is sharing its location with me?

  Hello

  If there are several device linked to the account, it's probably just that it took to give the positions of the other device or the iPhone is not connected by wifi or cellular connection.

• I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  I can't get my calculations right away, even after the selection "commit selected value immediately" on my drop-down menus. Any ideas?

  The field calculation order is probably not set correctly. The specific configuration procedure it depends on which version of Acrobat you are using. Acrobat 11, you would go first in forms editing mode (Tools > forms > change), and then select:

  Tasks > other tasks > set field calculation order