Windows 7 does not recognize scanner Canon DR - 2580C, even after the installation of the driver

Similar Questions

• My computer windows 8 does not recognize my Canon's SELPHY PRINTER. What can I do?

  My new computer Windows 8 does not recognize my Canon SELPHY printer. What can I do?

  [Moved from comments]

  Hi Jan,

  1. What is the number of the Canon Selphy printer model?

  2. have you installed the drivers from the printer?

  3 have you tried to plug it into different USB ports?

  I understand that you are not able to connect printer Canon Selphy on Windows 8.

  Check if the device is detected in Device Manager.
  Follow these steps:
  a. on the desktop, press the Windows key + X , and then select Device Manager.
  b. expand Print Queues , and then right-click on the printer.
  c. Select Properties , and then check to see if the device works properly under device status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there is a problem with the drivers.

  Follow these methods and check if that helps.

  Method 1: It is easier to connect to a printer on Windows 8.  Simply plug the USB cable from your printer to a USB port available on your computer.  If the computer is not find the printer, then plug it into another USB port and verify.

  Some older printers can require additional information to complete the installation, so connect you using the Advanced Printer Setup.
  Reference: install a printer in Windows 8

  Method 2: If there are no printer drivers available for the printer, then I suggest you to install the driver in compatibility mode.
  Install the drivers in compatibility mode for Windows 7.

  Follow this link and install the drivers for the printer.

  http://www.USA.Canon.com/Cusa/support

  Check out the following link to install the drivers in compatibility mode.

  Make the programs more compatible with this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows

  Reference: What to do if Windows can't find a device
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Follow the steps and let us know the results.   If you have any other questions, please post, we will be happy to help you.

• I'm trying to set up a N Router and my cd player does not recognize that there is a cd in the drive. Music CD plays without problem

  Computer does not recognize that there is a CD in the drive

  Hello, Bernice Arnold,.

  This thread has been created in the Windows Vista forum install, level and activation; the Microsoft moderation team has moved this thread in forum Windows Vista Hardware and drivers.

• Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  Original title: windows media problems
  Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  If you restart WMP when this problem occurs, which helps?

  It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:

  http://support.Microsoft.com/kb/330135

• Windows Vista does not recognize my Canon powershot A710IS

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  Recently tried to download photos for the first time in a few months and the USB or the SD card reader worked. The USB works for other things such as Chargers, printer, etc. Under Device Manager there is no option for a digital camera. My laptop does not recognize that anything has been plugged. Help, please!

  ===================================
  Maybe your AutoPlay settings need to be adjusted.

  Windows Vista - Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista - AutoPlay: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions

  Windows Vista - How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  The following items may be worth a visit:

  (927836) a still digital camera is not recognized
  in Windows Vista or in Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Windows Vista: Using the scanner and Camera Installation Wizard
  http://grok.LSU.edu/article.aspx?articleid=10705

• Windows 8 does not recognize my Canon Vixia HV40 by fire wire. Help!

  Hey guys,.

  I'm having a problem with trying to capture video from my Canon Vixia HV40 and do it on Adobe Premiere Pro CS6.

  I think that the main problem is that my laptop (running Windows 8) does not even recognize my camera using a fire wire.

  I've linked download these drivers and nothing works. Can someone help me please?

  I use fire wire that turns a USB port, if that tells you anything.

  Hello

  Thanks for posting your question in the Microsoft Community forums.

  Let me try and help you with the problem.

  1. you try connecting the camera for the first time on your computer?

  2. have you made sure the Firewire cable is working correctly?

  3. What is the status of the camera in Device Manager when you connect?

  To open Device Manager, press the key Windows key + X and choose Device Manager.

  In Device Manager, check if the camera is recognized.

  If the camera is not recognized, you may need to check the issue by using a different firewire cable.

  I also suggest you to run the hardware troubleshooter and check if that helps.

  1. Point to the upper right of the screen and then move the pointer of the mouse to the bottom and click on search.

  2. Enter Troubleshooting in the search box, type or click Troubleshooting, and then click hardware and sound.

  3. Click hardware and devicesand follow the instructions on the screen.

  Let us know if it helps. If you have any other questions, we will be happy to help you.

• WIndows 7 does not recognize my Canon EOS 60 d camera

  When I plug my camera into the USB port windows does not recognize it.   I can't see my camera in my computer.

  Now it is solved - uninstalled under portable devices and it works now

  When I plug my camera into the USB port windows does not recognize it.   I can't see my camera in my computer.

  I went in the systems and portable devices, I saw EOS 60 D.   I uninstalled it and now it works again

• Windows 7 does not recognize scanner HP PSC 500 all-in-one

  I have an old PSC 500 printer-scanner-copier HP - the type of parallel port - which works perfectly fine for my needs. I've recently updated to Windows 7-64 Ultimate, and while the printer works fine, Windows 7 can not see even the part scan PSC 500, as he's not here.

  I even requested assistance HP, downloaded and installed all channels they sent me and nothing.

  On the same computer, I also installed Windows Vista Ultimate 64 (dual boot) and Vista, the printer and the scanner will work perfectly well. This is not a BIOS or hardware problem.

  Can anyone here tell me how to recognize the scanner HP PSC 500 of Windows 7, or how force Vista drivers to run on Windows 7? What I did the research, the same problem seems to arise in Windows 7-32...

  Of course, I checked that the parallel port settings are exactly the same in Windows 7 as Vista and have also already checked every conceivable trivial mistake I might have committed. The scanner is not seen by Windows 7...

  Have you read the operating instructions to HP.com? http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796879&LC=en&DLC=en&cc=us&lang=en&product=58710

• Windows 7 does not recognize my Canon EOS 10 d when I plug it via USB - can not find the driver.

  When I plug in my camera the computer emits a sound that acknowledged the event, but can not find the driver for my Canon EOS 10 d digital camera.

  Canon has a compatible driver Windows 7 for your EOS 10 d...

  http://software.Canon-Europe.com/ Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• My Windows 7 does not recognize a new 3 TB WD My Book Studio external hard drive

  My Dell desk top running Windows 7 Home Premium and had an initial internal hard drive of 1.5 TB (7200 RPM) SATA. I am installing a 3 to Western Digital My Book Studio external hard drive, to store videos and photographs.

  I went into disk storage/computer/manage management. I can see the drive and it is marked as being "online". However, the system does not assign a drive letter to the disk.

  I can't find anything on the forum directly related to my problem it would be delighted to advice or assistance as to how I can solve this problem.

  See this article for all you need to know about the discs getting more than 2 TB to work...

  https://support.Microsoft.com/kb/2581408?WA=wsignin1.0

• Windows XP does not recognize my Canon ZR65 handycam.

  I have the 1394 cable connected to it. Was working fine until yesterday. Don't know why he's in trouble.

  Hello
   
  1. What is the error code displayed when you try to access the files from the camera?
   
  2. what hardware or software change has been performed on the computer before the question?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  How to solve problems of hardware and software drivers Windows XP
  
  http://support.Microsoft.com/kb/322205
   
  Method 2
   
  Start your computer in a clean boot to avoid conflicts with security and third-party software conflicts.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow steps to configure Windows to use a normal start state of the above-mentioned article to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  Method 3
   
  Reinstall the necessary drivers for the hardware.
   
  Install the latest version of the interface of the software / driver for m the site of hardware manufacturers.
   
  http://USA.Canon.com/Cusa/support/consumer/camcorders/minidv_camcorders/zr65mc#DriversAndSoftware
   
  I hope this helps.

• My toshiba satellite on windows vista does not connect to my sky605ac router, even when the signal is excellent

  Internet

  Most often when a device is not it's because of a driver.  Try reinstalling your.

  It works for win 7 & 8

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• Windows 7 does not recognize my external screen.

  Windows 7 does not recognize my external screen.  I checked the driver and even of the went to the NVIDIA site and plugged my material for my graphics card ID to get the correct driver and yet, it does not recognize it!  So here's what I have right now since I've upgraded to Windows 7 Ultimate edition = Standard VGA graphics card.  If someone has a legitimate solution to this problem, feel free to comment! Thank you

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• WINDOWS 8 DOES NOT RECOGNIZE THE SCANNER OFFICE HP OFFICEJET 4500

  MY WINDOWS 8 DOES NOT RECOGNIZE SCANNER OFFICE OF HP OFFICEJET 4500

  Hello

  1. don't you get any error message when the scanner not detected?

  2. do you insert scanner in another port of the computer or to another computer?

  3. were there any changes (hardware or software) to the computer before the show?

  4. other recognized devices?

  If your computer is having problems with a recently installed device or other hardware, try to use the hardware and peripheral troubleshooting tool to solve the problem. It checks the common issues of interest and ensures that a new device or hardware connected to your computer has been installed correctly.

  Run the hardware and devices Troubleshooter and see if it helps.

  a: press the logo Windows + O to open the search box.
  b: Type Troubleshooting, press on enter.
  c: now click material and its.
  d: now click hardware and devices , and then click Next 

  Answer please if you have any questions.

• Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.

  Windows 7 does not recognize that a Canon canoscan 8000F is as a device when it is connected to the USB port.  Tried unplugging, reboot & reconnect, in different orders, but the computer does not recognize there is.  Tried to install a European website for Canon driver: Scangear CS, 8000fvst8120a_xpen.exe, which is advertised as compatible with Windows 7.   But the installer does not work.

  Windows 7 Professional 32 bit.

  Hello Graboots,

  Thank you for your message.  You can plug your printer on another computer, in order to exclude the possibility that the problem lies in the printer?  You can try using a different cable, for this rule as well.  Since it is a question of recognition, we remove the external devices before software troubleshooting.  Do you get anything when you plug the printer (ie. a tinkle of connection)?  Please let us know, we are looking forward to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.