Any unusual activity on iOS when using VPN device

Similar Questions

• BlackBerry Smartphones Enterprise activation screen appears when the unlocking device...

  It started to happen about 6 of my users. When they unlock their 8900's that the Enterprise Activation screen appears (with no informed information) run us BES5.0 and these devices have been activated for at least 12 months. No money changers have been made to the server or policy in more than a month. Everyone knows this? Obviously all what they need to do is to close it, but then it comes back the next time that they unlock the device. Thanks, Edd...

  I just found this course to blackberryforums, it seems that a reactivation of the unit does not seem to solve the problem... I'll give it a try later today if I have time, TGIF!

  http://www.BlackBerryForums.com/BES-Admin-corner/215863-all-my-BlackBerry-devices-now-getting-random...

• my mac automatically keeps redirecting to a page of activation of comcast when I try to use a browser. I read that it might be a virus problem. Any suggestions?

  My mac automatically keeps redirecting to a page of activation of comcast when I try to use a browser. I read that it might be a virus problem. Any suggestions?

  A page that you really want to set your browser home page. There is no virus for Mac.

  If you are a new customer of Comcast and can't access the Internet, call Comcast customer support.

• Is there a delay in the signal when using Bluetooth on any iDevice and, in particular, on an iPad Pro?

  I am using Bluetooth involved in the use of music made a software with sounds of digital instruments using a musical keyboard hardware connected via the USB cable to Lightning to play sounds from the app on my iPad Pro.

  When I try to use a Bluetooth speaker source, there's a 1-2 second delay when I play a chord in the app and when the sound is played through the Bluetooth speaker.

  This delay IS NOT the case when I use just the iPad Pro speaker on when I am attaching some small travel speakers to the headphone jack of my iPad.

  Only when I try to use my Bluetooth speakers sounds better.

  I use a keyboard master Korg MicroKey Air uses the USB port play their own Korg music make its app module.

  Someone who makes music on an iPad with this problem at all?

  Is this a problem question Bluetooth and/or iOS?

  My iPad Pro isn't very strong using these apps do and travel speakers I use plugged into the headset jack music are a little better on the volume, but tend to deform when I try to increase the overall volume level.

  I intend to put this issue on the web forums for Korg, but want some answers from anyone who has been playing and recording music on their iPad using an external keyboard to play and record music in an app to do the music.

  Also, (and I intend to ask this in the GarageBand for iOS forums) can the iOS version of Garageband output sound on a Bluetooth speaker and quietly delay, too, that I can not get the iOS version of GarageBand to sound output via Bluetooth to a Bluetooth speaker.

  Hi, MichelPM

  According to the used speaker, he will always be * some * delay when using Bluetooth to stream audio from an iOS device (or practically any device BT also) through a Bluetooth speaker. I have a Bluetooth speakers system cheaper that I use with my iPad mini 4... I pretty much use it only to listen to sound. If I try and use it for Pinball iOS games I play, there is a delay of environ.5 second anywhere, I'm the speaker. Exactly same phenomenon occurs with the keyclicks when you type it on the iPad keyboard... 5 second delay & even with some applications of synthesizer iOS that I use (Animoog & Arturia iSEM). I think it's just the nature of the beast of Bluetooth.

  Higher quality speakers would be better, but I'm not spending more money to find out.

  If you want an immediate response with zero real audio keypress delay, I fear, the only way to do this is to use a wired speaker.

• My up asking me if I want to restore my Active Desktop and when I press Yes thinking it press I Yes. Any help will be appreciated and thank you

  Hello, I have Windows XP Professional on my computer at home and a week ago I noticed a new icon on the screen that says 'New Briefcase (2)' start. I'm not this letter from the computer where I can go and start trying to remove this or that and I would like to know what would happen if I chose to delete it? The other thing that has changed is the color of the background, it used to be the old blue startup screen and now it is white and a box asking if I want to restore my Active desktop. When I pressed yes thinking it would take me back to the old blue screen that nothing happens, so I end up going to the Panel and the opening of the office and when my old screen appears, I grow well and he is back to normal, until the next time that I start. What would cause that new icon to just pop as he did and why the white of the screen with this question? I did something that would cause these changes. Any help would be appreciated and I thank you for your time and your help.

  [Moved from comments]

  Hello

  The new Briefcase (2) is probably empty and may have accidentally created by a right-click on the desktop > New > Briefcase. You can safely remove. It is not necessary.

  For the question of Active Desktop, try this...

  Right-click on the desktop > properties > Display Properties > Desktop > customize > Web, uncheck whatever the page is listed or add a new Web page and uncheck the box, then OK your way out. That should disable Active Desktop.

  Then... Right-click on the desktop > properties > Display Properties > Desktop > select a color.

  Don

• Disk activity constant when using vista home

  Original title: I am running Vista Home premium and am sick of the constant disk activity slowing things down. I canceled the programs start and automatic indexing, but again the thing vibrates far. Does anyone have constructive ideas?

  Constant disk activity when using vista home. Any ideas how to stop it?

  Hello

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I can't see my iPHone on my mac pro when using Airdrop book, even though Airdrop is on both devices. Any suggestions?

  I assume that the Air Drop is enabled in the iPhone and that your devices are regarded as Favorites?

• I6 fire babysit device when using the internet? any solution?

  I6 fire babysit device when using the internet? any solution?

  Let's define "overheating". If the temperature of the phone reached a dangerous level the phone turns off it to cool down. This phenomenon occur? If this is not the case it is not overheated.

  What is your cell signal? If the signal is low, the phone must increase its power to maintain a connection. This may require as much as 10 times the energy as a strong signal, and the phone gets hot under these conditions. If will also drain the battery very quickly.

• Activation problem occurs when I use Win7 via VMWare.

  Hello guys,.

  I use a Win7 Ultimate installed on my macbook through bootcamp. It is enabled and works well. However, the activation problem occurs when I use Win7 via VMWare. A solution that keeps popping up is to use the phone activation and wait for the representative of the other side to help.
  I am currently in Cambodia, and they have not MSFT representatives here to answer. I'm calling them (the Singapore not. and the Viet Nam not.) with my Skype credits, but I am unable to connect.
  Please advice!
  Thanks in advance!
  
  Original title: activation issues

  Hello

  I suggest you choose the near by countries and by calls to this phone number. If you do not have representatives MSFT, and then try another nearest selection of countries and calls for a number.

  How to contact a Microsoft Product Activation Center by phone

  http://support.Microsoft.com/kb/950929

  Come back and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Photoshop CC hang randomly when using any type of brush. (Please HELP!)

  Photoshop CC hang randomly when using any type of brush. I use Mac OS Mavericks and lates of Photoshop CC version, the only way to make it work is to switch to another application, and vice versa, but sometimes this does not work and I lose all information.

  I tried to reinstall several times Maverick and Photoshop, but it does not help.

  Does anyone have the same problem?

  Hello

  We believe that we have found a fix for this problem. Please see the 'Correct' (#348) post in this thread about where to take the plug-in:

  http://forums.Adobe.com/thread/1012373

  Kind regards

  Steve

• Itineraries other nets will be lost when using the vpn client?

  I have a very general question. I intend to implement a security solution for the extranet partners to connect to our intranet using VPN client. IPSec will close on the external interface of the Cisco PIX firewall v6.3.

  Now, my consirn is, I downloaded the vpn client to test but I saw no advance settings to define what network traffic will pass through the IPSec tunnel and which will be routed normally. Is it by default all traffic passing through VPN? Is that what it means if there are other networks using their default route, they will not be able to achieve? (i.e. the Internet).

  Thank you.

  That would depend on how you set up the PIX. You can allow the VPN to your site and access to the Internet at the same time. This is called the split tunneling. It is configurable on the PIX, not the customer.

  This link might help you get started, but I'm sure that there stronger links.

  http://www.Cisco.com/en/us/customer/products/sw/secursw/ps2120/products_command_reference_chapter09186a00800ec9ec.html

• How to manage the photos Lightroom when using 2 computers, keeping any changes made on one or the other?

  Based on http://forums.Adobe.com/thread/1308132?TSTART=0 I decided to add each question separately:

  Hello, I am very interested in buying Lightroom 5.2. I tried the RC that was missing today. Yet, I have several questions that I can't find really good conclusive answers, I'd like to get an answer before buying LR. Please do not write maybe like this or that (assumptions), because I don't want to start my entire workflow and then realize that I have to change all around, please reply, if you know for sure that something works and you are, preferably, using this method too.

  Is the big question, where I want to especially a conclusive answer:  How to manage the photos Lightroom when using 2 computers, keeping all the changes made on one of them, using the same photos for editing. I'm not going to use DNG. Details: I mainly use my old MacBook Pro, but I wish I could use my PC as it is much better (card: i5 2500K, 16 GB of RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HD that I could use, one for backup and one for the actual Photos/changes. I you will probably need to use as my internal HDs are fairly complete and I cannot be the kind of things simply delete or move to one (developer, without loss of music, programs etc.).

  On this basis, how do I save all such Photos folder (pictures and retouching and preferably presets too)?

  According to me, that it should be possible to work cross-platform without having to create a link to the files each time, or without having to keep export/import of the catalog, keeping the single catalog and the picture library on an external drive that is then switched between systems as needed.

  Obvious first requirement is an external drive that is formatted in a way (for example, FAT32) that it can be used on both platforms in read/write mode. Given that, if the catalogue AND folder parent si le catalogue ET le dossier parent images are both set to the same level in a global parent folder, then it should be possible to take advatage of ability of Lightroom to use relative paths instead of absolute paths to detect the images, no matter if the player is named (Mac) or lettering (PC). This is how "export as catalog of ' works, that is, it creates a 'package', alias a parent folder, containing the catalog and a replica of the folder hierarchy to exported along with the catalog images. Take this 'package' to another system (same OS or not) and "it works" even if the drive letter is different or the operating system is different... because the relative path of the image catalogue is always the same.

  I have not tested this cross-platform (if I have between various PC systems with letters of different readers) so for me it's still just a theory, but there may be others who have done this successfully.

• Strange glitch Visual on the taskbar when using Firefox

  Hello

  I feel a strange glitch Visual on the taskbar when using firefox.

  Please take a look at this short video because it shows the problem, it's almost impossible to show in pictures.

  https://DL.dropboxusercontent.com/u/12595174/VIDEO0016.3gp

  I use firefox on Windows 7 Pro 64 bit v36.0.1. Video card is an ASUS R9 280 X using the latest drivers from AMD 14.12 Catalyst Omega Software.

  Motherboard is an ASUS M5A88 with 16 GB of ram and a processor of 6300 FX.

  It is a new construction that I have implemented in the last 24 hours, and this behavior was not present on the system using the same version of windows, firefox and even map chart and drivers. But on another card mother and CPU. Previous Board of Directors has been
  M4A79XTD EVO with a Phenom II X 4 955BE.

  The glitching does not occur when it is on the desktop and firefox is closed. It will not occur when you use IE - 64 nor does it when I am using the steam software or any Explorer windows/opening files.

  All the motherboard drivers are installed correctly, the integrated graphics card is disabled in the BIOS. I disabled the settings of firefox for hardware acceleration, smooth scrolling and text... to see if it was the question. It wasn't.

  I'd appreciate any help to solve this... Really, I don't want to use a different browser but it's bad enough and quite distracting to really annoy me, and I don't see any alternative.

  Thank you very much.
  H

  Hi jscher2000

  I was about to post a reply, because a friend suggested that maybe that's a rendering of issue rather than a firefox one video card even if it's strange how it affected firefox only. I didn't have a chance to test it on Chrome as it is a new construction and I don't want to install the software, I do not use.

  I went to the Manager of catalyst and had a glance to the settings. I changed something, but no help... I then started to make a simple change and test until I found that the activation "gpu up-scaling" in the properties of digital flat screens has solved the problem.

  I am now free twinkle

  Thanks for your quick response however.

• iPhone 5 battery runs very quickly when using mobile data

  When I use mobile data on my iPhone 5, the battery seems to run out quickly. When I say fast, I mean very quickly, it will drop 100% completely dead in 20 minutes. What I do when I use mobile data is send some Snapchats and that's all. I left mobile data on, I have it on when I need to use it. I tried using mobile data for other things, and the same thing happens. Sometimes the phone will completely die to about 40% of the battery being left. I am almost convinced that I need at this point a new battery for my phone. Finally, I want to mention that these problems don't happen when you use mobile data, WiFi. Does anyone have any suggestions?

  iOS: version 9.0.2

  See the following article:

  https://www.Apple.com/support/iPhone5-battery/

  In addition, download the app from the battery life and see what it says about the health of your battery.

• sound problem when I use external devices

  When I use a headset, earpiece or bluetooth that I distorted sound. I'm buzzing, distorted. I used external devices cannot all ofa suddenly be a problem of my phone head etc. He plays well without external devices.

  Poor quality through the headphone jack can be caused can be caused by dirty or damaged jack.

  Try to clean the headphone jack.

  For other outputs:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Reset the headset/BT BT device

  -Reset network settings: settings > General > reset > reset network settings. You will have to join the networks wifi and re-pair the BT device

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar