AnyConnect profile do not update correctly

Similar Questions

• The user profile does not load correctly

  Running Vista Ultimate.  I have 2 user accounts, the two administrators.  If a user remains logged on for any period of time (more than 10 minutes), disconnects, and then another user logs on, they will get the dreaded "your user account is not load correctly."

  A reboot always restores the afflicted user account.  Web an extensive search doesn't have all the solutions near mine.

  Examined the msgs of following error in the application event log: 1511 1515 WARNING WARNING 1502 1508 error.  This just started recently.

  Appreciate your help.

  Have installed kaspersky AV and media center tv pack units.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you've added the Google toolbar, Chrome or the z
  Google Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been logged on with
  a temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you can't access your old account you can still use an Admin to migrate to a new
  (remember to always leave an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• my user profile does not load correctly. My system logged me in my computer using the temporary profile

  original title: user profile

  . When in safe mode, I see all my apps, but in normal mode, it does not load properly.

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• icon cache Explorer Windows only is not updated correctly

  I had to reinstall my computer Setup, I was able to fix most things with the domain controller that you get with your computer, but I can't fix this problem, when I go to My Documents in Windows Explorer opens and I don't know how to get it back on windows Explorer.

  Can anyone help.

  Thank you

  Gertrude.

  When I enter (Windows Explorer) in my programs list it goes in (My Documents), this is incorrect, it should be list (my computer).   I've also been (Fix it Center) I have pasted (below) what he says about icon cache and what's wrong with it but do not know how to fix the problem myself.  Could you please give me an idea how to solve this?       Not fixed Icons randomly change to different icons Failed

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly.

  Rebuild the icon cache

  Rebuild the icon cache solves this problem.

  Thanks a lot for your help.
   
  Gertrude

• your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message
  
  "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

  and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

  Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  t-4-2

• Recent items in Vista does not update correctly

  I have a problem that the recent items on the Start Menu is not updated correctly.  There are a few documents out there, but there are many who don't are not who should be.  If I right click on the recent items and choose explore I can see a lot more files in the C:\Users\Pete\AppData\Roaming\Microsoft\Windows\Recent folder.

  For example, there are few. XLS and. DOC files that I opened recently but don't are not.  However when I explore the folder I can see a shortcut to the directory that contains the missing files.

  I tried many combinations of physically erase the folder, by activating / disabling the option elements recent etc, but nothing helped.

  Thanks in advance

  I had the same problem. I fixed it by deleting all entries, except the default entry, in HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\RecentDocs in the registry. There are a bunch of other entries which are numbered for each of the files in the list of recent items. and the entrance to MRUListEx. Delete it all. Unfortunately, there is no file name but only entered, HEX numbers and letters. After doing this, Windows has started listing the files in recent Articles that were not show up there before.

  I found that the problem has followed a couple of files that were present in recent Articles when I cleared the list a few weeks earlier. After these files are not present in recent items, but rather the shortcut to the folder appears. Also, I've found that the problem was with the actual files, not the folder. I opened the 2 files, Excel, and a Word document and choose Save under and added a 2 to name the document, save an exact copy of the documents. Each copy has appeared in recent and open items without any problems. Copies of rename the original name and overwrite the originals, reduced the problem. I searched the registry files to see if there's information about save them in a special place, but nothing found. They were only listed in the MRUlists for each of their applications, showing other open documents recently Excel and Word.

  Since I had made changes to the documents and saved the changes in copies that end in 2, I chose save as once again and replaced the original files with updated copies. Now my original files, with the update of information, see and open from the list of recent items.

• "Your user profile was not loaded correctly! You have been connected with a temporary account.

  Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons.  All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time.  I immediately thought that I had a virus, ran a scan and nothing came.  Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere.  Did a system restore, but that did not help.  I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account."  I am only connected under a temporary account.  Help, please!  I have no idea how to solve this problem!

  Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons.  All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time.  I immediately thought that I had a virus, ran a scan and nothing came.  Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere.  Did a system restore, but that did not help.  I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account."  I am only connected under a temporary account.  Help, please!  I have no idea how to solve this problem!

  Hey Kimberly9701

  Here are the tips from microsoft on a temporary profile loading

  "Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administrator. »

  http://support.Microsoft.com/kb/947242

  Walter, the time zone traveller

• Used profile was not loaded correctly

  I closed my laptop and when I came back to her, all my settings Vindow Vista was Dams by a new office so much, I lose all my frame. The following message:

  "Your user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administration".

  I don't no how to recover my previous setting because this information is very technical for me.

  Thank you:

  I closed my laptop and when I came back to her, all my settings Vindow Vista was Dams by a new office so much, I lose all my frame. The following message:

  "Your user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administration".

  I don't no how to recover my previous setting because this information is very technical for me.

  Thank you:

  Hey Harry Pozas

  first thing to try is a system restore in safe mode for a moment before the problem

  Here's how to go in safe mode

  http://www.bleepingcomputer.com/tutorials/tutorial61.html#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and here's how to use the system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  If it does not read the microsoft information on a profile of temporaory loading below

  http://support.Microsoft.com/kb/947242

  Walter, the time zone traveller

• Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  Some icons in my computer, in Windows Explorer on the desktop, or on the Quick Launch bar change randomly. This problem occurs if the icon cache is not updated correctly. How can I rebuild the icon cache solves this problem

  http://www.Vistax64.com/tutorials/117229-icon-cache-rebuild.html

  How do I rebuild the icon Cache in Vista

  See you soon.

  Mick Murphy - Microsoft partner

• User profile does not load correctly, the user could not be connected.

  I tried to login to my account to administrator with my correct password and it says "user profile can be connected, user profile does not load correctly ' or something to that effect. Even when I login as a guest and enter my admin password on the user accounts settings and click ok, it won't let me access or modify accounts. Please help me, I am not able to access one of my documents or pictures of my guest account.

  ·                         Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• my user profile does not load correctly

  my user profile does not correctly load system continues to connect with a temporary file. All I had on my screen disappeared! How can I get that back as it was? I tried to restore to an earlier time, but no luck.

  Hello

  Check this box:

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  http://support.Microsoft.com/kb/947215

  Does that help?

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Paragraph Photoshop styles does not update correctly

  Hello

  I have trouble getting the paragraph styles feature to work correctly in Photoshop CC 2015. I created a style of paragraph called 'p' and taking into account these values:

  

  Note that 18px is the size of the text.

  When I select a text element and change to this style of 'p' is not is not updated even though it says the paragraph style has so no substitutions. As you can see the text isn't 18px, although the paragraph on the right shows style now overrides

  

  Please help me with this

  Switch to Photoshop for beginners

• VO with bind variable defined in SQL is not updated correctly

  Hi Experts,
  
  I have a simple question here, could you please help answer? Thank you very much!
  
  I have 2 pages, the first page displays an employee table, the second page shows a few details to the selected employee. When to choose a single employee and click the details button I can be naviaged to the second page and see the details for the selected employee. The vo used on the second page uses a connection variable called "empId" thing for a 'adf.context.pageFlowScope.empId' pageFlowScope value, and this value pageFlowScope will be filled to the empId selected detail button actionListener during execution).
  
  The question is, now first navigation is ok, the details of the page can display the correct information for the employee selected on the page of the employee, but when browsing back and choosing another employee, and then again click the details button, the details of the page is NOT updated, it still shows the initial information for the selected employee. I debug the actionListener in support bean and the second selected empId passed to pageFlowScope.empId, the link in the t variable should get the new value, right? But why the second page gets no updates (request using the new value of the bind variable)?
  
  Thank you!
  
  Published by: user774592 on July 20, 2011 23:13
  
  Published by: user774592 on July 20, 2011 23:15
  
  Published by: user774592 on July 20, 2011 23:15

  In theory, if you expose specific objects of customer to your business (for example pageflowscope) service layer, you may miss 1. test driven development assistance (case of unit test can fail) 2. Customer service of independent business etc... :)
  To respond to your request try to call TargetPagesVO.execute () before the second page (by program or activity method)

• Record in the table don't is not updated correctly after sail of detail page

  I have 2 jspx pages (page A) a table showing the employee record, another a (page B) is used to update the file of the selected employee. On the page, when the button select a folder and clicking on the 'details' I may be navigaed at pag B on which I can edit registration information in a form component. I have a table column 'Prospect', which applies to a LOV layer VO pageB I use < af:inputComboboxListOfValues > to display a combo of LOV for this attribute, when I enter a new value here and save it, I can go back to page one, but the name of the team for this record shows empty, by querying the database that I find the record updated successfully with the changed value. And when I reloaded the page this record may indicate the new team name value. Why it is not updated in the employee table, when browsing immediately return of page B? I put the table attribute to 'always', but always refresh iterator not. Can anyone help with this? Thank you!!
  
  BTW, for the other columns (not LOV), they are ok, the table can display the value correctly.
  
  Published by: user774592 on July 14, 2011 19:56
  
  Published by: user774592 on July 14, 2011 21:59

  What component to use to show as filed?

• HomeScreen icon does not update correctly

  I'm trying to update my HomeScreen iconwith copy the following code:

  UiApplication.getUiApplication().invokeAndWait(new Runnable() {
       public void run() {          HomeScreen.updateIcon(IMAGE_NEW,0);
       }
  });
  

  It generally works well, with one exception: on the Storm, if the home screen is in this limited view where it shows that two or three rows of icons, the icon is not updated until the application icon focus is changed, or if the orientation is changed to landscape mode. Is there something wrong in the way I update the icon? It works fine when I'm in the mode where all the icons are available (i.e. after hitting the button menu).

  You do not have something wrong, that it is a limitation of the current home screen API.  Our development team is aware of this problem.