AnyConnect validation

Similar Questions

• AnyConnect 3.1 - the certificate on the secure gateway is not valid

  Hi guys,.

  I have a problem with the Anyconnect 3.1.01065.

  When I try to connect I get the "the certificate on the secure gateway is not valid. A VPN connection can be established.

  The certificate is a signed cert self.

  Woks AnyConnect 2.5 without problems.

  Image of the ASA: 8.4 (2).

  [27.11.2012 15:58:27] Ready to connect.

  [27.11.2012 16:01:49] Contact IP_WAN.

  [27.11.2012 16:01:52] Please enter your username and password.

  [27.11.2012 16:02:01] User credentials entered.

  [27.11.2012 16:02:02] Establish the VPN session...

  [27.11.2012 16:02:03] Checking for updates to profile...

  [27.11.2012 16:02:03] Checking for updates...

  [27.11.2012 16:02:03] Checking for updates of customization...

  [27.11.2012 16:02:03] Execution of required updates...

  [27.11.2012 16:02:08] Establish the VPN session...

  [27.11.2012 16:02:08] Setting up VPN - initiate the connection...

  [27.11.2012 16:02:09] Disconnection in progress, please wait...

  [27.11.2012 16:02:13] Connection attempt failed.

  Anyone had this problem before?

  Thank you very much.

  Hello Cristian,

  Please see this:

  CSCua89091 Details of bug

  the local certification authority must support the EKU and other necessary attributes

  Symptom: The local CA on the ASA server currently does not support attributes like the EKU. This enhancement request is to add support for this. Workaround: Configure the cert on the customer's profile

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCua89091

  And the following:

  DOC: Anyconnect supports Extended Key use specific attributes in CERT

  Symptom: When using certificates with the anyconnect client if the certificate is installed on the SAA does not have the EKU attribute set to "Server authentication", then the anyconnect client will reject the ASA certificate as invalid. The certificate of the client id must also be '-l' client authentication "otherwise the ASA he will reject... Conditionsof : Use a certificate of id on the ASA with one other than «authentication server» EKU Use a certificate of id on the client that has one another EKU that '-l' client authentication. Workaround solution: Generate a new certificate of ID with correct extended key usage

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty61472

  If at this point, you need to set up the corresponding certificate or use an earlier version of the AnyConnect client.

  HTH.

  Please note all useful posts

• AnyConnect Session Timeout issue

  We have some remote users that are not happy with the SSL Connect connection down after close their laptops or lose their wireless for once. I read this question and answer of a Cisco page and I was wondering where the session time-out setting is changed. It's on the network client, software map AnyConnect or ASA firewall?

  Thank you, Pat.

  Q. What is the AnyConnect reconnect behavior?

  A. AnyConnect will attempt to reconnect if the connection is interrupted. This behavior is not configurable and auto. As long as the session on the SAA is still valid, the session will resume if AnyConnect can restore the physical connection.

  Version 2.2 includes a roaming feature that allows AnyConnect reconnect after a sleep of PC. The client will continue to try indefinitely until the head told him he can't reconnect and the client will not immediately RIP into the tunnel when the system goes Standby/Hibernate implementation. For customers who don't want this feature, set the session timeout value low to prevent sleep or resume reconnects.

  And also, for the new AnyConnect profile changes take effect, you will need to reconnect your AnyConnect session if the new policy is pushed to the client.

• AnyConnect VPN - certificate expired error Java

  Hello

  Since April 4, 2015, Java has been blocking the process of installing AnyConnect via web-deployment (see screenshot). It indicates there is a certificate expired with these details:

   Issuer CN=VeriSign Class 3 Code Signing 2010 CA, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US Validity [From: Wed Jan 02 19:00:00 EST 2013, To: Sat Apr 04 19:59:59 EDT 2015] <----------------------------- Subject CN="Cisco Systems, Inc.", <----------------------------- OU=Digital ID Class 3 - Microsoft Software Validation v2, O="Cisco Systems, Inc.", L=Boxborough, ST=Massachusetts, C=US 

  This certificate is not detected at the entry "show crypto ca cert" on the SAA - it is NOT our certificate, as it is given to "Cisco Systems, Inc.", and he has clearly exceeded.

  We manage the Software ASA 9.1.6 and this behavior happens (at least) the past three versions of Java.

  Does anyone else have this problem? Is there something that can be done (server side) to solve this problem?

  Thanks in advance...

  Hi mknaebelcu

  The problem has to do with the AnyConnect Client deployed and not with any certificate on the SAA.

  See bug CSCut80840

  https://Tools.Cisco.com/bugsearch/bug/CSCut80840/?reffering_site=dumpcr

  Should contribute to an upgrade to 3.1.8009 or 4.0.2052

• Cisco AnyConnect do IPsec?

  Hi guys

  I have a Cisco ASA5520 with software Version 8.2 (5) in place, most my users are Mac users and I am currently looking into Cisco AnyConnect in comparison using the VPN client.

  I have a few questions

  (1) Cisco AnyConnect does he use IPSec or is it soley based SSL VPN?

  (2) the license information I have in my ASA below, I understand that I can get max 750 vpn peers am however I have reason to say that this does not apply to Cisco AnyConnect peers? and with Cisco AnyConnect, I can only have 2 peers? Also, what are the options for mobility anyconnect for?

  The devices allowed for this platform:

  The maximum physical Interfaces: unlimited

  VLAN maximum: 150

  Internal hosts: unlimited

  Failover: Active/active

  VPN - A: enabled

  VPN-3DES-AES: enabled

  Security contexts: 2

  GTP/GPRS: disabled

  SSL VPN peers: 2

  Total of the VPN peers: 750

  Sharing license: disabled

  AnyConnect for Mobile: disabled

  AnyConnect Cisco VPN phone: disabled

  AnyConnect Essentials: disabled

  Assessment of Advanced endpoint: disabled

  Proxy sessions for the UC phone: 2

  Total number of Sessions of Proxy UC: 2

  Botnet traffic filter: disabled

  (3) when you try to configure Cisco Anyconnect on the SAA by using ASDM, I noticed that I needed to download AnyConnect client images, but when I did this by downloading the .dmg for mac machines file I got the error message 'not an image valid of the SVC'. Is it because I'm under 8.2?

  Your help is highly appreciated

  Concerning

  Mohamed

  Hi Mohammad,.

  I'll answer your questions one by one:

  1 cisco Anyconnect version 3.0 and above all support SSL and IPSECv2 connection. If you want the user to connect using the Anyconnect client IPSECv2 then it will consume the SSL license and not the IPsec license however if you use IPSECv2 for connections such as vpn site to site then it will consume normal IPSec VPN license.

  2. one.  SSL VPN peers: this license gives you information about the number of users that can connect using SSL protocol for example using the Anyconnect and web portal customer also known as the clientless VPN based on. I see here there are only 2 licenses so at any given time only 2 users can connect successfully because 750 is the total number of licenses available for the VPN on the SAA, 698 only will be available for IPSec connections.

  b. Anyconnect for mobile: this license is required whenever a user connects from a Pocket like device: Iphone, Ipad, tablets etc.

  c. Anyconnect of Cisco VPN phone: Cisco IP phones have the ability to connect to an ASA remote using the SSL protocol and to enable this feature, you should have this license is activated on the SAA.

  d. Anyconnect essentials: Anyconnect there are two licenses, one > Anyconnect Premium and b > Anyconnect Essentials. AnyConnect essentials is less expensive as premium per report Anyconnect license. This license is for those who don't use webvpn or VPN without client. When the license is activated, the user can connect only to the Anyconnect VPN client.

  3. I don't know what image you use on the ASA. Please try the image named as anyconnect-macosx-i386 - 2.5.2010 - k9.pkg.

  To apply the changes using the command line, put this image on disk0: and then type this command on the CLI.

  Image disk0:/anyconnect-macosx-i386-2.5.2010-k9.pkg SVC

  Let me know if it helps.

  Thank you

  Vishnu Sharma

• Witch problem Anyconnect - computer reading certificate

  Hello world.

  We are experiencing a problem with our computer Windows 8.1 domain and Anyconnect.
  We have deployed computer certificates on all computers in our area and use them for our wireless networks, which works very well.

  Anyconnect at startup as a domain user, it did allow us to connect using the computer certificate. We get an error message saying: "Certificate validation failure" and the history of message says: "no valid certificate available for authentication.

  If we run anyconnect as administrator, there is no problems, and the connection is established immediately.

  We tried to give the domain users read access to: HKLM\software\microsoft\systemcertificates, but it helps didn t.

  We tested the same configuration on OSX Yosemite, and there it works fine.

  We've had success deploying a certificate user to user (Windows 8.1), but we prefer to use the computer certificate.

  Any ideas? If you need more information, please let me know.

  Best regards

  From: http://www.cisco.com/c/en/us/td/docs/security/vpn_client/anyconnect/anyc...

  "In the preferences pane (part 1) profile editor, use the list of certificate store box to configure in what certificate store AnyConnect search certificates." "Use the box certificate store override to allow AnyConnect search the computer certificates store for users with non-administrative privileges.

  Rob.

• AnyConnect VPN client authentication using certificates

  Guys, I'm trying to configure my ASA5505 to authenticate the AnyConnect VPN clients using certificates. I have 'Certificates' defined as my method of authentication in my AnyConnect connection profile (see screenshot), but I get 'Certificate Validation failure' whenever I try to connect. The certificate I want to use is a computer issued by my CA certificate company root (Windows Server 2008 running Active Directory Certificate Services). Screenshot of certificate is attached. I added the root certificate on the SAA, and I tried all kinds of combinations by using the corresponding certificate in the AnyConnect Client profile. Each attempt failed, and I'm having no luck finding documentation on how to proceed. Any help would be greatly appreciated!

  Hello Shaun,

  The problem you're describing, not be able to authenticate through certificate through Microsoft Internet Explorer, is the fact that the certificate is in the computer store.  You do not want to confirm with Microsoft, but, I understand that only Microsoft Internet users explore the user store, this certificate is not available to attend the ASA via the Internet browser.

  -Craig

• ISE - Anyconnect wireless

  Hello! We have a doutb concerning our ISE installation. We have created a new SSID with validation EAP Chaninng (user + validation machine using the Anyconnect client) through ISE and the posture of the NAC.

  The problem is that when a user has never connected to a PC and trying to connect for the first time through this wireless, does not work. The facts are like this:

  -L' user introduced user/pass for the first time to the computer

  -Computer must contact AD to download profile

  -Computer associates with the network

  -ISE puts the user 'pending' until it is compatible NAC

  -Computer launches never process the NAC, it is never

  -ISE does not give access to the network

  -Cannot connect to the computer user.

  This happens only the first time a user attempts to access the network, because you need to download the profile, if the user has connected previously, this isn't a problem. Do you think that there is no solution for this problem?

  Use EAP with EAP-FAST v2 chaining. During the authentication attempt, the supplicant provides credentials for the machine (ISE) authentication server and the user on each attempt to auth.  Supported by the Cisco AnyConnect 3.1/supplicant client. In ISE to allow its support (policy-policy-> results >-> authentication-> protocols allowed-> default access to the network-> enable EAP-FAST).

• New AnyConnect 4

  Hi Experts,

  My client has VPN client version 5.0.07.0440.

  They must simply 5 SSL VPN connections. I had proposed the "L-ASA-SSL-10 =" license premium but later found out that this is not end of life and I have to upgrade to 4.x Anyconnect.

  The customer already has a valid smartnet. My question is, should simply upgrade us the VPN Client to the new Anyconnect 4? or something else is required for the migration. There not all previous purchased licenses.

  After correct me if I'm wrong, here are the licenses he wants for his 5 SSL connection.

  Line Number	Name of the element	Description	Service Duration	Lead Time	Included Agenda	Quantity	ListPrice	Extended ListPrice	Discount %	Sale Price
  1.0	L AC-APX-1 YEAR-G	Cisco AnyConnect Apex 1 year subscription license group	N/A	2 days	NO.	1	0.00	0.00	0	0.00
  1.1	AC-APX-1 YEAR-25-S	Cisco AnyConnect 1 year 25 license users Apex	N/A	2 days	NO.	1	0.00	0.00	0	0.00
  1.1.0.1	AC-APX-1 YEAR-25	Cisco AnyConnect 1 year 25 user Apex subscription	12 months	N/A	NO.	1	360.00	360.00	0	360.00
  1.2	L-AC-APX-S-1Y-25	Cisco AnyConnect 1 year 25 user Apex (ASA-license key)	N/A	2 days	Yes	99999	0.00	0.00	0	0.00
  						Total part-time				360.00
  						ConfigSet total				360.00

  Thank you

  OK - no client is supported only on Apex AnyConnect 4.x license if this is a new purchase.

  Premium AnyConnect licenses (now end sales) existing 3.x support also without client.

  The final user at will without customer experience be different with a complete tunnel (VPN IPsec or SSL) they will receive only the services that can be exposed through a browser natively or via a plug-in.

• Cisco Anyconnect license upgrade Questions

  Hi all

  So, we currently have a pair of failover ASA 5515 - X running at one of our sites. This serves as a VPN gateway for our users. I am migrating users from the old Cisco VPN client to the newest Cisco Anyconnect client. I have work and installing anyconnect. Meanwhile, I discovered that process to take care of TLS 1.1 and using the Anyconnect client, you must use the most recent 4.0 Anyconnect client. To use this client, you must have something license called a "Anyconnect more" I think it was a recent change of return in 2014. We currently have the Anyconnect Essentials license installed on the ASA pair. I discovered that not only it a license upgrade available for upgrade Anyconnect positive of the battery, but the Anyconnect Plus license is subscription now. Boo Cisco. But that's another debate.

  I went ahead and reluctantly bought the upgrade license to upgrade Anyconnect positive of the battery. I am trying to understand however the affects of the installation of this license with respect to the current VPN functionality. Currently, we offer the following VPN options for our users:

  RA IPSEC (IKE v1via former customer)

  RA IPSEC (L2TP via the Windows client)

  SSL (Anyconnect 3.0)

  We also use tunneling IPSEC of P2P (IKEv1 PSK) between two sites to serve as a link of relief when our primary site-to-site link fails.

  If anyone knows what would be the effect on the current VPN functionality when installing my upgrade license? He turns off the older IPSEC IKEv1 feature? As I said I want to migrate to the newer platform users but still have need of the oldest customer work until this can be done. I have this in my current setup:

  WebVPN

  AnyConnect essentials

  What happens on this command when I apply the new license?

  Appreciate any help here. Thank you.

  Addition of the new activation key and the client configuration somehow 4.x will not affect the IKEv1, L2TP or VPN SSL. "AnyConnect essentials" rest a command active and valid

  It will give the ability to activate the advanced security features that require the 4.x client.

• Cisco ASA AnyConnect SSL VPN - certificates + token?

  Hello

  I'm looking for an answer is it possible such configuration:

  The Cisco AnyConnect SSL VPN service with two-factor - first method is the Microsoft CA certificate local and second method - a token solution Symantec VIP password?

  I don't know if two-factor authentication is user/password from Active Directory + OTP by Symantec VIP there is no problem, because you can send the user + pass with Radius, but with certificates I do not really understand who will check the validity of the certificate, which certificate, we will send you to the RADIUS for the validation server and how the configuration of the point of view of ASA will look like.

  Thank you very much for the help!

  Hi Alex,

  I don't see a problem with having certificate + token to connect to the VPN. Certificate authentication must be performed on the SAA, see an example below:

  https://supportforums.Cisco.com/blog/152941/AnyConnect-certificate-based-authentication

  Authentication token can be specified as primary/secondary (authentication SDI) on the SAA, an example below:

  http://www.Cisco.com/c/en/us/TD/docs/security/vpn_client/AnyConnect/anyconnect31/Administration/Guide/anyconnectadmin31/ac11authenticate.html#pgfId-1060345

  It may be useful

  -Randy-

• SSO Client AnyConnect & clean access

  I have a Setup ASA 5550 with the AnyConnect Essentials license and it works. Behind the VPN, we have a CA 4.1.8 Server uses SSO. The appearance of this VPN works, but I encounter a problem with OSX and the Agent of CA. Windows and the work of the OSP Agent. When connecting to the VPN via AnyConnect on a MAC (OSX 10.5.8) it connects, but when the Agent it starts to communicate with the CASE you are disconnected.

  I watched the traffic between the ASA and the CASE, the Radius traffic seems good. Is this a bug?

  ASA: 8.2 (1)

  CASE/CAM: 4.1.8

  Officer MAC CA: 4.5.0 (it is supported by docs).

  Thank you

  -Dusty

  Hey dusty,

  Try this:

  -Look in your user appropriate for the dir CCAAgent directory (in my case it was: tprender/Users / / Library/Application Support/Cisco Systems/CCAAgent)

  -Create a preference.plist file if it does not exist - if there is, just add the key/value for "VlanDetectInterval" below channels

  -To create the file, make 'vi preference.plist' and enter these data:

  " http://www.Apple.com/DTDs/ PropertyList - 1.0.dtd" >

  Autopup

  Yes

  VlanDetectInterval

  0

  -Save this file (VI,: wq and), then restart the Cisco NAC Agent (right-click on the icon and exit, then restart in your application menu)

  The VlanDetectInterval must be set to 0 (default is 5) as the Macintosh do stupid things with the vpn interface.

  I hope this helps. Please rate if find you a valid solution.

  See you soon,.

  Tim

• AnyConnect 3.1.01 - disable the client at startup

  Hello

  This is my 2nd thread on the forums of Cisco.  My last post was a success, so I thought I could try my luck with another issue that we have with our new 3.1.0165 Anyconnect client on a Win7 laptop.

  I noticed how the new customer is responsible and active by default, when a user connects first into the machine.  Normally, we expect the VPN remains off until manually initiate us a connection.  Its not causing a problem necesarrily, but it's an eye sore to have an application running when its not needed.

  Is it possible to configure the AnyConnect client so that it does not boot up and load in the default system tray?

  John

  John,

  I apologise for any inconvenience.

  I understand your point of view and is valid, but this is part of evolution AnyConnect. This is intended for detection of network Always On and trust features.

  Here is the request for improvement for your reference:

  CSCtn12023"> ENHRQ: AnyConnect 3 installation should have the option to disable the start on logon.

  So at this point, you could use Windows MSConfig and disable the AnyConnect client under the Startup tab.

  Please mark this message as answered if you have any other questions.

  Portu.

• AnyConnect image in Flash for the Anyconnect customer login

  Hi dear.

  Is it necessary to have an Anyconnect image in the flash of the SAA for Anyconnect users connect to it.

  I had a user who got to MAC OSX and tried to connect to a firewall using Anyconnect but failed because the MAC OSX Anyconnect image was not uploaded to the firewall. However, he could successfully connect to another firewall, in which the image was present. So it will be also the case for Anyconnect for Windows. And also does it really matter which version of the image is present in the flash as long as you have the picture for this operating system platform

  Thank you :)

  Any valid image for the client OS will suffice.

  If the version of the client is more recent, they will keep it.

  As you may have noticed, if none is available (and specified as one of the AC images), the client will not be able to connect.

• AnyConnect local auth

  I configured webvpn/AnyConnect on an ASA. This firewall has also IPSec for remote access configured (and work). When I try and connect to the webvpn, I get the following error.

  Unauthorized user to access AnyConnect Client, please contact your administrator

  I think I have good sound because users of IPSec use RADIUS to authenticate and webvpn is also. I want webvpn to use only the local database at the moment. Someone knows how to put webvpn for local auth?

  WEBVPN as uses a group of tunnel for this validation of the user, if it is not expressly defined it will use namely 'DefaultWEBVPNGroup' by default in this section, you must enter DefaultWEBVPNGroup General-attributes tunnel-group mode and enable the LOCAL server as shown below:

  attributes global-tunnel-group DefaultWEBVPNGroup

  LOCAL authentication-server-group

  NOTE: If this webvpn already uses the RADIUS to validate users, you must create another group of tunnel where you set LOCAL authentication and ensure that this group of WEBVPN Tunnel is chosen by the user. This can be done with the group alias or group url on the ASA.