Anyone running Linux on optiplex 9020 (Haswell)?

Similar Questions

• Loads of boot UEFI PXE not available on OptiPlex 9020 AIO A09 for Win7?

  We prefer to use UEFI instead of legacy for our new systems mode. Previously, we were able to use the active UEFI PXE with SecureBoot disabled and ROMA Legacy boot. The service seems to come and go with each version of BIOS for the AIO 9010, and now on the 9020 AIO with A09, he went as well.

  On a 9020 AIO with A09, if I enable Secure Boot and disable Legacy ROM PXE is available. If I disable SecureBoot (required for the loading of Windows 7) and allow ROMA to the legacy, it has no option to start on the network when you press F12.

  Our new AIOs with BIOS A02 9030 allow us to perform a boot PXE in this way without problem, so I guess that the problem in A09 is a bug and not intentional.

  Anyone else running into this?

  @Community,

  I am pleased to announce that the Optiplex 9020 AIO BIOS A11 is now available to the public. The update of the BIOS A11 has resolved a problem where in A09, the UEFI network box battery inside the BIOS would itself be clear after the release of the BIOS. This prevented the UEFI network protocols appear in the one-time boot menu.

  In short: with AIO BIOS A11 9020, you can now have the legacy option ROM both the UEFI network stack activated at the same time.

  For those who are not familiar with the specific screens in question, I have them listed below.

  Here's the box UEFI would uncheck itself in A09:

  

  It's the legacy ROM option checkbox:

  

  Here's the menu starting time on the A11 with two Roma legacy option enabled and the network UEFI active stack:

  

  The pic then the AIO 9020 had installed A09 and after trying allow the UEFI network stack. You will notice that UEFI protocols are missing because the box UEFI disables itself:

  

• PXI-8360 (MXI-Express) PCI-8361 + Dell OptiPlex 9020 = "device cannot start." (Code 10) »

  Hello

  I have a chassis PXI-1050, conencted to a Dell OptiPlex 9020 via a PXI-8360 and a PCI-8361 (identified as 199392B - 01L). It is Windows 7 64-bit. I can't start Windows very well, but MAX can't see all my PXI hardware. The Device Manager has also 2 inputs "PCI standard PCI to PCI bridge" with exclamation points.

  I placed an old FireWire PCI card in the same dwelling and recognized PC. Thus, the slot went very well.

  I transferred the PCI-8361 to an old PC that contains older drivers, and he acknowledged all my PXI hardware. For example, PXI gear works fine.

  What could be the problem? Here's a screenshot of my software OR installed. I think I installed all the drivers I need. I checked NI Update Service; There is no update of Critcal, and only updates and Service Packs listed are 2013 LabVIEW and TestStand 2013.

  

  JKSH,

  I look in that little bit more and think that I now know enough to be dangerous.

  The BIOS allows the PCI Express native control mode in Windows.  PCIe natively do not like some of the architecture when you use the PCI card version, so it disables the bridges on the PXI card.  I can tell that your OS is PCIe natively because it lists one of the ports as "PCI standard PCI Express to PCI/PCI-X bridge" Device Manager like you posted.

  I found that you can disable PCIe native mode, if you want to try it (but in general using the card PCIe is a better option).  Here are the steps:

  -Open the start menu and type "cmd" in the search box; Right click on "cmd.exe" and run as administrator.

  -In the command window, type "bcdedit/set pciexpress forcedisable.

  -Reboot.

  I don't think it would break anything (it doesn't have on a system I've tried).  If you want to reverse the trend, the command is ' bcdedit/set pciexpress by default'

  -Robert

• Headset Beats mixr (microphone) - desktop Optiplex 9020

  Hello everyone,

  I'm trying to run this Beats mixr headset (microphone)-

  

  -with my Optiplex 9020. This headset comes with a simple plug but works for mobile phones, like handsfree for music, Skype, etc.

  I don't know if there is a chance to use it in the same way with my PC, I mean, not only for playback of the sounds, but also as a MIC for taking calls from Skype.

  In fact it is quite wrong. You can use them even on the desktop PC and phone. Anyway converts be it, throughout the day.

  The parties to do so are not free, but they are easy to obtain.

  You need adapters to convert the Apple Iphone IPAD ports to the red and the Green PC Ports for microphone and headphones.  There are a two way conversions.  So if you have a headset with Boom microphone and want to use the phone you cable Y return to standard Apple.

  http://www.Amazon.com/headset-buddy-smartphone-BlackBerry-01-PC35-PH35/DP/B00ENFA3GO

  If you have a standard headphone 3.5 mm T/R then you use a turtle Beach Amigo II to convert USB to PC. And reverse an adapter to convert for IPOD, IPAD, IPHONE or Android.

  http://www.Amazon.com/Smartphone-headset-PC-Adapter-01-PH35-PC35/DP/B008OB2NHA

  http://www.turtlebeach.com/product-detail/sound-cards-accessories/audio-advantage-Amigo-II/32

  

  cs_setInnerHtml ('video_8c764828-f4cf-4a6b-ae7e-e0634c3a549c', ");

• Release date for OptiPlex 9020

  Hello

  No one knows what will be the release date for the OptiPlex 9020 to the United States?

  Seems to be already available on the Dell French site: http://www.dell.com/fr/entreprise/p/optiplex-9020-desktop/pd

  I talked to my Dell Rep today and he told me that they will be not available in the United States until mid-September with a global presence and the company > employees 300 because Intel imposes limits on the new chip Haswell.  Just try to get another opinion.

  Thank you

  Carlos

  Hello Carlos.

  Desktop Dell OptiPlex 9020 class business are available in the United States.

  I hope this helps!

• RAID 1 on Optiplex 9020 and Ubuntu Desktop 14.04

  Hi, first sorry for my English

  I am trying to configure raid 1 with a dell optiplex 9020 minitower, but at the moment it does'nt work. I have configured raid 1 on the bios and installing ubuntu start but then fail.

  Possible that the od raid controller PC is not compatible with Ubuntu Desktop 14.04?

  Hardware RAID requires a controller. You then boot BIOS and Partition and INITIALIZE the container.

  You start live linux and to partition and to format and install.  You can't do that on the fly during installation.

  The container must be initialized as a single disc BEFORE any os turns.  The container must be initialized as a reader unique regardless of which operating system you want to install.

• HP 17-g121wm: goes black screen, but the computer still running (Linux)

  I use HP 17-g121wm laptop. The screen turns off at random 2-5 minutes after the start, sometimes earlier. The computer will still run, but the screen will be black (the backlight seems to stay lit, however). Any buttons I press on, nothing makes the screen back on, so I have to press the power button to turn off the laptop and back on.
  
  This problem does not occur when I start in Windows, but when I boot in Linux (I tried Ubuntu and Arch linux), the problem persists.

  I tried to boot with the kernel parameter 'nomodeset' grub, but when I do that I can't enter a graphical environment, because the amdgpu driver is based on Kernel Mode Set (KMS) without nomodeset.
  
  I prefer to use Linux on this laptop for programming and development, preferably of Arch Linux. So, any help would be greatly appreciated.

  jreynaud1

  I run Linux distributions on my desktop PC and from your description, the problem is almost certainly the lack of video drivers, especially in the case of the AMD video chipsets.

  I'm not familiar with the Ark, but I don't know with Ubuntu, which I had problems driver AMD for several versions now, and the last, Xenial 16.04, fglrx drivers simply will NOT work because they are not supported with the new version of the kernel and will not be - as AMD is working on a new driver open source to replace fglrx.

  HP forums provides no support for Linux issues, if my suggestion is to check with the forums Linux appropriate for each distribution.

  In addition, as you use a video chipset AMD, you might find the info you need on the Phoronix forums: AMD/ATI Linux - Phoronix Forums

  Good luck
  ========================================================================
  I'm a volunteer and I do not work for, or represent, HP.
  ---------------------------------------------------------------
  If my post helped you, please click on the Thumbs-Up symbol on my post to say thank you.
  If my posts resolved your issue please click "accept as a Solution.
  ========================================================================

• GPU on Satellite P100-217 fan never turns on running Linux Gentoo

  Hello

  I am running Linux (Gentoo) on my P100-217 (Geforce 7600). The graphic card fan never turns on, and the GPU gets to a temperature higher than 100 ° C when executing some 3d games. When I boot to windows, the graphics fan does not turn and the GPU is much cooler, running the same games.

  Can someone Toshiba please give me some information on how to solve this problem under Linux.

  Here is some additional information:
  Driver version: 1.0.9755
  nvclock version: 0.80.
  Nvclock message: you the fanspeed adjustment only is not supported on your video card type

  Thank you

  Chris

  Hello

  I'm not Toshiba, but maybe I can help you too.

  Type in the console:

  detection sensors

  and follow the instructions. Maybe you need to compile some kernel modules yourself.

• Problem starting OptiPlex 9020

  I have an optiplex 9020 having a blinking cursor for about 10 to 15 seconds before the screen startup Dell and after the Dell splash screen. I have the latest version of the BIOS and use an SSD as boot drive and SATA drive as a secondary drive, the bios is set to boot only the SSD. I have the sata AHCI operation, the value of the RAID is disabled. This is a new installation from the CD from Dell on the SSD. I looked in the bios but not see anything that would cause the problem?

  Same here right out of the box.  In my case, having only the SSD in the startup list, gives "no boot device", most of the time.  Enter the BIOS, the SSD Liteon is no longer in the same list after adding it and re-record.  Update the BIOS does nothing to correct.

  But hitting F12, the SSD will always be an option and when selected, always boots.  It seems to be a kind of calendar of initialization when the BIOS examines the various materials.

• OptiPlex 9020 MT asus gt740

  Hello

  I want to install the graphics card ASUS GT740 on my optiplex 9020 MT

  In GT740 specifications, he mentions that its pciE 0.3.

  Is this compatible with pciE at MT. optiplex 9020 slot?

  TNX

  Link to GT740 spec:

  www.Asus.com/.../Specifications

  Legacy MSC mode, it should be good.

• Windows 8 Pro the OptiPlex 9020

  When will they be available with Windows 8 Pro OptiPlex 9020 s?  He was not available on the OptiPlex s 9010 or any OptiPlex except the all-in-one for more than a month.

  It would be I think that it is not available on other models because the company will not even ask for it.

• OMCI support for OptiPlex 9020 M

  OMCI 8.2.1 will support the new OptiPlex 9020M or do I need to start using the new version of Dell order manage with this new desktop PC?

  Hi EGIROUX,

  OptiPlex 9020 M is officially supported with the Dell order. Monitor and can also work with OMCI 8.2.1. But please start using the latest version of the OMCI - order Dell | Monitor v9.0 for additional features.

• Dell OptiPlex 9020 thin metallic part sff on expansion slots.

  Hello

  I tried mounting of low profile firewire expansion card to my OptiPlex 9020 sff computer.

  When I put the card in it would not fully, glancing thin the metal shield or

  What that either has come down and I had to remove before the card would be

  sit properly. My question is do I have this expansion slot shield plate located on is very

  thin and fragile still.

  It may be leaking RF problems but is otherwise functioning not prevent more than leaving the lid completely turned off.

• Desktop OptiPlex 9020 8.1 of Windows x 64

  I just installed Windows 8.1 x 64 on an OptiPlex 9020 and had graphics using IE11 display problems using the latest drivers from Dell.  The problem was that graphics had a large "X" on the whole of the image.

  I was using these drivers: Intel 9.18.10.3055 06/03/2013

  Then I updated to the latest drivers Windows Dell 8: 24/06/2013 9.18.10.3220

  Display problems were still present.

  I then updated the drivers to the latest Intel (15.33.8.64.3345).  You had to do since the Device Manager as Intel blocks the process of executing setup.exe.

  Also after the installation of the whole machine is MUCH faster using applications.  Just thought I'd share.

  Dell, ETA, when drivers will be updated on the latest platforms to desktop and laptops Dell for Windows 8.1?  I'd feel a lot more comfortable, but there was a Dell "verified" Intel video driver.

  Hello

  You can try with the last Win 8.1 video driver Intel for desktop Optiplex 9020 x64Bit and it is available in the link below

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/OptiPlex-9020-desktop?driverId=YGVRN&osCode=WB64A&FILEID=3325316993&LanguageCode=en&CategoryID=VI

• Wake on LAN doesn't work don't not on Optiplex 9020

  I'm not able to get the Wake on LAN to work on an Optiplex 9020 (small footprint).  I have the following BIOS settings to the title of power management:
  -Control deep sleep-> disabled - Wake on LAN-> LAN only
  -Block-> block (State S3) sleep sleep

  I have the following settings for the card Ethernet Intel I217-LM:
  -Wake on Magic Packet from power off State-> Enabled
  -Wake on magic packet - > enabled
  -Active sleep on model matching->

  When the computer is turned off, the network adapter has NO of LIGHTS.  Does that mean than the Wake on LAN is not configured correctly?  Which setting I'm missing?

  In case this is relevant: Windows 7 Pro 64 bit.
  Thank you.
  Jerry

  I installed A07 and WOL works now.