AP cannot participate. DTLS connection closed by controller

Similar Questions

• HP B8T40LA 1000: touchpad won't scroll and cannot open or connect with synaptics v7.5

  Hello

  Only the functionality of scrolling on the touchpad on my laptop HP 1000 does not work, when I try to open the Synaptics Touchpad V7.5 it says "cannot connect to the controller synaptics pointing device. Any help?

  Thank you.

  Hello

  Try the following.

  First, download the installer of the Synaptics driver from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp62501-63000/sp62715.exe

  Then, open windows control panel, open programs and features, right click on the entry of Synaptics and select uninstall.

  Once done, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  Kind regards

  DP - K

• Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Cannot view or connect to the Wifi network of 5 GHz with Time Capsule from Apple 5th generation

  I have a new Apple Time Capsule 2 TB with 802.11ac network support. I have setup my base station in order to disseminate the 2.4 GHz and 5 GHz network SSID. I have 2 apple (iPad Mini and Macbook Pro) time devices can see and connect to Terminal 5 GHz network however I have also a Lenovo Vibe P1 phone (dual band wifi supported) and Samsung Galaxy Tab S compressed (dual band wifi supported) and these devices cannot see or connect to the network of 5 GHz of Base Station. I also have a Cisco router that has a dual-band support and all my devices can see and connect to the network of 5 GHz of this router.  So I wonder why I have this problem with time capsule?

  I have reset my base twice station and it is a new device purchased last month.

  Any help or suggestion is appreciated.

  Did you use the SMB compatible names for everything...?

  That is to say the alphanumeric short, without spaces and Pure...

  for example base station name... TCgen5

  name TCwifi wireless

  Have you also used the password corresponding to these requirements... but can be between 8 and 20 characters.

  If so, then you must give a different name to 5 GHz and delete the password and test... If it's not yet connect the test manually on channels 36, 44, and 149 for example if you are in the USA...

• Safari cannot establish a connection to the server

  I have try this site to opoen: https://www.infragrad org I get this error msg

  Safari cannot establish a connection to 'www.infragard.org '.

  all other web browsers work with this site no message.

  Certificates? or what else?

  IM using worm 6.2.8 in Mt lion

  If Safari says cant Safari't establish a secure connection

  https://support.Apple.com/en-us/HT204937

  You have antivirus software installed?

  If so, uninstall it.

• My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  My iPad has completely turned off and cannot be restarted connect to iTunes on my Mac. He comes up with an error 3014 overtime and so can't do anything. Any ideas on what it takes then please.

  Looks like you have jailbroken your iPad.

  You must restore like new with another computer.

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  I have a HP G60-214EM laptop and cannot get it connected to my samsung 26 "smart tv. Can anyone help?

  Hello Maureen56,

  I understand that you want to connect your TV to your laptop.

  To connect your computer to your TV HDTV using an HDMI cable, follow these steps:

  1. Locate the HDMI port on the back of your TV. It should be more than one, in order to choose the one that is otherwise unused. Note the port on which you choose.

• Email - connection closed gracefully

  Having just opened an Outlook account a week due to problems with another provider, I start to wonder if I made a sensible thing. I look at my emails via an email client.

  Friday I sent a lot of mails from outlook and everything worked fine. Today, having changed anything I can no longer send emails even though I can get them. (I can send via gmail).

  [ERROR] - an error has occurred. Account: ' pop - mail.outlook.com ', Protocol: "SMTP", task: SMTP send all messages, Server: ' smtp - mail.outlook.com ", Port: 587, TLS: no (1.0), error code: 0, error message: 'connection closed gracefully.", the last response from the server: "" for more details look in the "Log" tab - error messages are marked in red.

  <- 550="" 5.3.4="" 554-554="" 5.2.0="" storedrv.deliver;="" delivery="" result="">

  -> RSET

  An error has occurred. -Connection closed gracefully.

  This problem was solved when about 30 minutes after I posted the question and one hour after the problem began, I received an email from saying that, if I wanted to send Outlook messages, I needed to check my account by copying the number of letters at the end of the email. I did and it worked since!

• BlackBerry cannot accept the connection via the Mobile network?

  Hi all, on Blackberry, I want to open a server socket to listen to a connection come from other devices.

  Here is my code:

  String url = "socket://:12345;deviceside=true";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  Mobile network on that BB is ok, but it cannot accept any connection.

  I also use its mobile phone network to connect to other servers, it works fine when it's the client socket.

  I tried with the Wifi network, and it works very well.

  String url = "socket://:12345;interface=wifi";
  ServerSocketConnection scn = (ServerSocketConnection) Connector.open(url);
  SocketConnection sc = (SocketConnection) scn.acceptAndOpen();
  

  In my view, Network Service Mobile prevented so that other devices connect to it, is it true?

  Please explain it to me, thank you very much!

  This approach only works for mobile connections, when the data are pushed to the device.  You cannot use it to connect to other phones directly.  Sorry

• net.rim.device.api.io.ConnectionClosedException: Connection closed

  Hello

  I'm "net.rim.device.api.io.ConnectionClosedException: Connection closed" exception so that he was trying to get the response code in the following code snippet. What will be the reason for this exception: -.

  HttpConnection connection=(HttpConnection)Connector.open(url);
          System.out.println("Post-----------------------1");
          connection.setRequestMethod(HttpConnection.POST);
          System.out.println("Post-----------------------2");
          connection.setRequestProperty("Content-Type",aRequest.getContentType());
          System.out.println("Post-----------------------3");
          Hashtable header=aRequest.getHeader();
          if(header!=null)
          {
              Enumeration enumeration =header.keys();
              while(enumeration.hasMoreElements())
              {
                  String headerStr=(String)enumeration.nextElement();
                  String headerValue=(String)header.get(headerStr);
                  //System.out.println("header:"+headerStr+"headerval::"+headerValue);
                  connection.setRequestProperty(headerStr,headerValue);
              }
          }
          System.out.println("Post-----------------------4");
          OutputStream postRequestOutputStream=connection.openOutputStream();
          System.out.println("Post-----------------------4#########");
          postRequestOutputStream.write(aRequest.getPostData());
          System.out.println("Post-----------------------4%%%%%%%");
          postRequestOutputStream.close();
          System.out.println("Post-----------------------5");
          System.out.println("RES CODE:"+connection.getResponseCode());
          InputStream is=connection.openInputStream();
  

  Try opening the InputStream before getResponseCode().

  concerning

• 1130 connects to the controller after the HREAP

  I had an AP connected to my controller 4402 performer 4.2.207 1130.  I went to the value of the HREAP access point and after that I applied the parameter HREAP, the AP restarted and will connect is the controller.

  This is the error message I receive on the controller.

  WARNING: invalid ID slot (255) to REAP - traceback =
  0x4F026C 0x4F0394 0x498B24 0x491DC4 0x4AAF90 0x48DAC4 0x48E35C 0x197630o REAP - traceback =

  The AP part number is AIR-LAP1131AG-A-K9.

  This access point is running without problem until I tried to change it to HREAP.

  Any suggestions on how I can retrieve this AP?

  Seth

  Looks like we're hitting the software bug CSCsj69497 but its 4.2.173 fixed to... (but we are short of 4.2.207)

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCsj69497

  Try upgrading the LWAPP AP to the last recovery image and let me know how it works for you!

  If the above has not resolved so more study... Please open a SR with us (TAC)...

  Concerning

  Surendra

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• Using Reporting SERVICES report server cannot open a connection to the report server database in SQL server 2008 R2 sp1

  Hello

  I'm running Reporting SERVICES Version 2007.0100.1600.022 ((SQL_PreRelease). 080709-1414 in Visual Studio 2008 with Microsoft SQL Server 2008 R2 Express Edition with Advanced Services (64-bit) on Windows NT 6.1 SP1.)
  Everything seems to work fine except that I can't deploy: "the report server cannot open a connection to the report server database."
  Connection test ReportServer as OK in the Configuration service report manager and Visual Studio. Run reports in Visual Studio against ReportServer and my other databases.  Deployment fails on a report of VM. Remote access is enabled in the firewall, pipes is enabled in configuration Manager SQL server, the permissions for all access in Windows.
  The error in the log file of report Service:
  Library! WindowsService_1! 12ac! 09/23/2012-21: 05:12: e ERROR: ServiceStartThread: Exception caught during the startup of service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ReportServerDatabaseUnavailableException: the report server cannot open a connection to the report server database. A connection to the database is required for all applications and treatment. ---> System.Data.SqlClient.SqlException: a network-related or instance-specific error all by establishing a connection to SQL Server. The server is not found or inaccessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 - error Search Server/Instance specified)
  Any ideas?
  Thank you.
  -Phil

  Just, I solved the problem I had.

  It turns out, there, there were two questions... first concealing the second.

  SQL Web browser has not been activated.  solution: in properties SQL server configuration manager, transformed the startup to automatic mode and activated the service.

  Microsoft Visual Studio project property targetdatasourcefolder had a server name that precedes the name of the folder. Removed the name of the server.  This works.

  Everything unfolds right now.

• Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Sorry I forgot to paste the link in the previous answer,

  Here's the link - Preview fails in muse

  Kind regards

  _Ankush