Apart from the question of access partner newly created the workspace

Similar Questions

• is that bbui.js supports other phone device apart from the BB10 (like android or iPhone)

  is that bbui.js supports other phone device apart from the BB10 (like android or iPhone)

  BBUI.js is only supported by BlackBerry. To implement a user interface independent of the platform, you will need to use another library like jQuery mobile, etc.

• Problem in opening up financial reports from the workspace using a normal user id

  Hello
  
  We have recently migrated from version 9.3.1 (32-bit) to Oracle EPM 11.1.1.3 version (64-bit) and have a major problem with financial reports:
  
  * User who is configured as an administrator for the purpose of planning or reporting and analysis administrator can access a financial report to the workspace without any problem.
  
  * a normal user who is configured as a viewer, Explorer, analyst, editor of personal settings (under reporting and analysis) can see the POV and NOT the report. The report is just empty.
  
  * If a group (say A) is assigned 'administrator reporting and analysis' and 'Request for trust' and a normal user is assigned to this group, the user can then access the financial report with no problems. But we don't want to do coz:
  
  The normal user gets access to access shared services
  The user also gets see all other records and reports in the workspace to which he has no access to. The reports that are not in its right of access using the incorrect data gives.
  If the reports and analysis administrator privilege is removed from Group A and NOT 'Trusted Application', existing users in the group can still see the reports to which they have access to (with other documents to which they do not have access to). But if a new user is created from scratch and added to this group, it gets again a report empty with POV.
  
  
  Please let me know if anyone has experienced this problem and found a work around.
  
  
  Thanks in advance!
  
  
  Here is our environment.
  
  *****************************************************************
  The Oracle EPM system has been downloaded oracle delivery Web site
  * Oracle Enterprise Performance Management (11.1.1.3.0) Media Pack for Microsoft Windows x 64 (64-bit)
  
  Environment of the EPM system is as follows:
  A server:
  Shared services, planning, workspace, web, calculation of financial information manager application
  
  ServerB:
  Essbase server, Essbase Administration services, provider services
  
  C Server
  Financial reports, Webanalysis

  It drove me crazy. The minimum amount of access I could give users was Bishop content rights so that they are able to run the reports.

  I connected it with Oracle and they finally gave me with the solution.
  Bug # if you are interested is 8991596, but I think it is unprecedented.

  WARNING: I highly recommend that you talk with support and mention this bug number before executing this SQL.
  This code worked for me and I don't have problems after running it but I ran this on a first test environment. I accepts no responsibility if your environment explodes etc etc!

  See you soon,.
  Gee

  # 1. Run the following SQL to display the internal records.
  # "Show hidden objects" must also be enabled in Explorer to display the folder.

  update of v8_container the internal value = 1 where parent_folder_uuid = "HRINTERNALFOLD" or container_uuid = "HRINTERNALFOLD".

  # 2. Remove all files in the folder "HRInternal" from the Explorer.
  # Do not delete the HRInternal folder!

  # 3. run the following SQL to reset the folder "internal".
  update the internal value = 0 v8_container where container_uuid = 'HRINTERNALFOLD. '

  # 4. Run the following SQL to recreate the folders with access to the global group

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('USERPOVFOLD','ID03','HRINTERNALFOLD','UserPov',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('USERPOVFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('USERPOVFOLD', 1, '\HRInternal\UserPov')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('USERPOVFOLD', 'USERPOVFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('USERPOVFOLD', 'HRINTERNALFOLD')

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('DATASOURCESFOLD','ID03','HRINTERNALFOLD','DataSources',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('DATASOURCESFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('DATASOURCESFOLD', 1, '\HRInternal\DataSources')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('DATASOURCESFOLD', 'DATASOURCESFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('DATASOURCESFOLD', 'HRINTERNALFOLD')

  INSERT INTO V8_CONTAINER (CONTAINER_UUID,META_TYPE_UUID,PARENT_FOLDER_UUID,NAME,CREATION_DATE,EXPIRATION_DATE,DESCRIPTION,CLASSNAME,BROWSABLE,AUTO_DELETE,CASCADE_DELETE,DELETED,SUPERCLASS,USER_ATTR_FLAG,USER_NAME,GROUP_NAME,PUB_RATING,IS_INLINED,OCOL_METATYPE_UUID,LAST_MODIFIED_DATE,CAN_HAVE_EXCEPT,INTERNAL, OWNER_LOGIN, IS_FOLDER ) VALUES ('HRSCHEDULERFOLD','ID03','HRINTERNALFOLD','DataSources',NULL,NULL,NULL,'com.sqribe.transformer.Folder',0,0,0,0 ' com.sqribe.transformer.Folder' (, 0, 'administrator', 'world', 0,0,NULL,NULL,0,1, 'administrator', 0)

  INSERT INTO V8_CONT_VERSION (CONTAINER_UUID, VERSION_NUMBER CREATION_DATE, LAST_MODIFIED_DATE, FILE_SIZE, CLIENT_FILE_NAME, HAS_EXCEPTION) VALUES ('HRSCHEDULERFOLD', 1, NULL, NULL, NULL, NULL, 0)

  INSERT INTO V8_FOLDER (CONTAINER_UUID, VERSION_NUMBER, FOLDER_FULL_PATH) VALUES ('HRSCHEDULERFOLD', 1, '\HRInternal\DataSources')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('HRSCHEDULERFOLD', 'HRSCHEDULERFOLD')

  INSERT INTO V8_FOLDER_TREE (FOLDER_UUID, ANCESTOR_UUID) VALUES ('HRSCHEDULERFOLD', 'HRINTERNALFOLD')

  -Give full control access to the UserPov of human resources to the global group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('USERPOVFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('USERPOVFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

  -Give full control access to the data directory of human resources for the global group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('DATASOURCESFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('DATASOURCESFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

  -Give full control access to the HR planner record for World Group
  insert into V8_ACCESS_CTRL (id_ressource, ACCESSOR_ID, ACCESSOR_TYPE, GRANT_ID, GRANT_TYPE) VALUES ('HRSCHEDULERFOLD', "0ad72237 - c 008 - 0d 59-000000e4d26d0c20", 2, "0ad72262-0000 - 0 has 78-000000e9583bf0f0", 1).

  HRInternal - dummy record owner
  insert into V8_RESOURCE_OWNER (id_ressource, OWNER_ID, TYPE_ID) VALUES ('HRSCHEDULERFOLD', ' 00000000-0000-0000-0000000000000000', "0ad72298-0000-0ccc-000000e750dc47f8")

• Remove unused workspace from the workspace switcher

  Some areas of work that comes with Photoshop are not useful for me.  Is there a way to delete preinstalled wokspaces starting from the switch to the workspace?

  Have you tried that?

  

• How can I change the view in the workspace to see the entire track or a song or just a bar across from the workspace: to expand or shrink the display horizontally, but not vertically?

  To enlarge or shrink the display in the workspace horizontally

  There are no assigned keycommands for this. This means that you assign to the keys of your choice.

  

  

  Here's the manual explaining how.

  http://help.Apple.com/LogicPro/Mac/10.2/#/lgcp41ff6979

• Image export from the workspace of DEV to Production env.

  Hi all
  I exported the workspace and the DEV env application. to Production env. However, the images of the workspace are not. How can I move these images of an environment to another and vice versa.
  
  Thank you in advance for your help!
  
  cmovva

  Home-> Application Builder-> export-> Images

• Calculation Manager is not available from the workspace

  We have recently installed Hyperion Planning v 11.1.1.1.0 to a customer. The installation consisted of EPMA. Everything works fine (app created, responsible for dimensions, forms of work, etc.) with one exception. We cannot step Manager appears as an option in the menu under "Administer" in the workspace. We installed the calculation Manager Finally, after that everything was in place. We have configured in the EMP system configurator. The calculation Manager service is running and everything seems to work in EPMA. I use the user ID is a shared services administrator with administrator rights Manager calculation.
  
  I have to do something stupid, but unfortunately the calculation Manager is new to me. We tried to restart all services.
  
  Any ideas?

  Hey Jake,.

  You redeploy workspace and re-configuration of the web server after the installation of the Calc Manager?

  Just like all the other components workspace does not recognize if it was installed after the deploy/web server config workspace - poor design in my mind.

  Kind regards

  -John

• Apart from the demilitarized zone or static NAT?

  Hello!

  I'm trying to implement the static translation from outside my network in DMZ. I tried with nat, global and static use but failed with both. The problem is that packets are go to the servers in the DMZ but nothing is returned to the sender. Also, when I try to access a Web server in DMZ I get SYN timeout.

  The traffic of my LAN (inside) local DMZ works as it should however.

  -Important conf--->

  access-list ON scope allowed any ip a

  Global interface (dmz) 12

  NAT (outside) - 12 OUT out access list

  Access-group OUT in the interface outside

  no nat control

  -more than information--->

  Interior - the security of IP 10.0.13.1 level 100

  DMZ - security level 50, IP 172.16.13.1

  outer - level 0, the security of IP 192.168.13.2

  Bastionhost = Web server

  -See the nat--->

  Policy NAT outside interface:

  match any ip outside any demilitarized zone

  dynamic translation to the pool of 12 (172.16.13.1 [Interface PAT])

  translate_hits = 2, untranslate_hits = 0

  When I used static instead of nat, overall I had so many untranslate_hits I sent to servers in DMZ.

  -Debug--->

  Built dynamic TCP translation of outside:192.168.13.5/1316 to dmz (OUT): 172.16.13.1 / 1028

  Built of 469 for incoming TCP connections to dmz:bastionhost (172.16.13.1/1028) outside:192.168.13.5/1316 / (bastionhost/80) 80

  Disassembly of the TCP dynamic translation of outside:192.168.13.5/1317 to dmz (OUT): 172.16.13.1 / 1029 0 duration: 00:39

  Disassembly TCP 473 for outside:192.168.13.5/1318 to dmz:bastionhost connection / 80 0 duration: 00:30 bytes 0 SYN Timeout

  Thank you.

  Your following config is fine, your bastionhost here with a public IP address of mapping that will allow the access server to the internet as well.

  allowed any icmp extended WEB access list a--> add this option to test accessibility outside bastionhost / internet and remove it later.

  IP any host 192.168.14.5-> or add 'eq www' to specify the port allow Access - list extended WEB.

  static (dmz, outside) tcp 192.168.14.5 www bastionhost www netmask 255.255.255.255

  group-access WEB interface outside

  You can omit the next part that meant allowing internet access only, bastionhost not allowing users to access.

  Global 1 192.168.14.5 (outside)

  NAT (dmz) 1 bastionhost 255.255.255.255

  BTW, what is the State of the road looks like?

• Ent of Windows 7. Apart from 2012 - Windows cannot access \\server\share$

  I have a treatment of strange problem with part of 2012 R2.  We have a lab with 30 workstations Windows 7 Enterprise.  They all have the same office via a redirection of folder GPO applied to a share on the server of 2012 R2 mentioned above.  All but 4 of them can connect and pull on the desktop the appropriate shortcuts, network folders, etc.

  The share permissions so no denies explicit.  In an effort to solve this problem, I added everyone and authenticated users, with read permissions on top of the appropriate ad group object that already had read permissions and, of course, SYSTEM and with full control Domain Admins.  NTFS permissions have, of course, CREATOR OWNER, SYSTEM and with full control Domain Admins.  Also, the appropriate ad group has read permissions.  No NTFS clear or rejects the request.

  Using the same account that belongs to the appropriate group or my domain administrator account (which has no office redirected) I can connect to all the workstations and all, but the four mentioned above get the redirected folder desktop.  When I authenticate my account with DA and try to connect to the share on these four computers I get the same error to the user:

  Network error

  Windows cannot access \\SERVER\Share$

  You are not allowed to access \\SERVER\Share$.  Contact your network administrator to request access.

  I think we've all seen this error before.  But I only saw him associated with NTFS permission issues or sharing.  Frankly I'm perplexed.  Any ideas on what's going on?

  Edited to add: I don't think it's a problem with sharing.  Clearly, it's a matter of workstation since 26 of 30 machines Win 7 can be connected without difficulty.  And I don't think it's a matter of profile either since I've never authenticated on these workstations with my domain account.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Apart from the scope, is there an advantage between elements of application elements of page zero vs?

  It's the kind of best practices of the question type.

  I understand, the application parts are available throughout the app Page zero points will be available on the pages where page zero is used. But there are basically the same.

  So, outside of the scope, is there an advantage to using application elements vs zero page elements for items that will be used on most of the pages? My use is I have these reference values of almost all the pages and there are some pages that will change the value of this variable. They are not constant.

  Thank you!

  Do you need constants then?  IK them would define as page 0 items that are hidden and cannot be changed otherwise then I would use elements of application to a minimum.  For the most part, I also do not recommend 0 page elements, because they are not passed in and out of shape but are only accessible...

  In a perfect system, you pass in a page, what suits him and, according to the elements of the application and page elements 0 is dangerous in my mind...

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• First elements apart from the other video program

  Hello

  For now I use Cyberlink Power Director 5 for my videos and music videos.

  However, I noticed that Adobe Premiere Elements has also some interesting features.

  I would like to know if the APE can be installed next to my other video program?  A new program sometimes refuses to install, because another video program is already installed on the PC.

  Thank you for your info.

  Kind regards

  Martine

  I use PrPro for most of my NLE work. On my desktop, however, I have Magix, CyberLink, WMM and two other NLE. No problems. On my laptop, I have only PrPro, PE and WMM - still no problems.

  If I use PrPro as my main NLE on both computers, I use other tools when necessary.

  Hunt

• Implemented by default for the field instead of login from the workspace

  Hi, I would like to make a request I made the default so that when people go to the URL: http://apex.mydomain.com they are routed directly to the app instead of the login to workspace page.
  
  Can I configure in section Admin APEX? I have seen a few sites on built on APEX where if you click on www.domain.com you redirected to www.domain.com/pls/apex/f?p=158
  
  Thank you
  
  Using Apex 4.1.1 on Linux with Apex listener v1.0 on Glassfish.
  
  Published by: Orion Starc on 25-Sep-2012 17:02

  Hello

  Hi, I would like to make a request I made the default so that when people go to the URL: http://apex.mydomain.com , they are redirected directly to the app instead of the login to workspace page.

  Can I configure in section Admin APEX? I have seen a few sites on built on APEX where if you click on www.domain.com you redirected to www.domain.com/pls/apex/f?p=158
  >

  Not possible within the Apex. Possible with OHS or the Apache HTTP server. See http://mewithoracle.wordpress.com/2012/04/27/apache-rewrite-for-oracle-apex-application/

  See you soon,.

• sqldeveloper could not connect the newly created user

  Here is my description of my computer and software
  # OS - > ubuntu 10.04 (32 bit)
  # DB-> 10 g XE
  # Request Express - > version 4.0.2
  # Sqldeveloper-> version 3.0.04
  
  I installed 10g XE in my ubuntu 10.04 (32-bit) with success and you then unblock account HR. After that I upgraded application Express 2 to 4. Then created a new "worksapce' with user name and password.
  
  I can access with success of HR, sys and system account of sqldeveloper. But when I try to access newly created valid workspace with his user name and password I could not do that. You can see more details, [see here | http://www.youtube.com/watch?v=_G_EeBgZ1KY].
  
  But in the past, I can connect newly created Workspace even as human resources account. So what's the problem. Can you guyz guide me to conncet it.
  
  
  Thanks in advance

  >
  I can access with success of HR, sys and system account of sqldeveloper. But when I try to access newly created valid workspace with his user name and password I couldn't do that
  >
  If you have a problem or a question about Apex post in this forum
  Oracle Application Express (APEX)

  In sql developer, you can only connect to users of Oracle (schemas), not workspaces. So unless you have a user called "admin" Oracle, you won't be able to connect. When you created the workspace you may reuse an existing schema or provide a name for the new schema. These patterns are what you would connect to.

  In the nav tree open the tree of the user "sys" and see the list of "other users". This subtree will contain ALL Oracle users. You must log on to one of them.

• The best way to transfer items from the old to the new mac?

  I don't want to transfer the 'bad things' of my old macbook pro to my new macbook air.

  I understand how to transfer my whole system, but which would also take the old stuff I want to leave behind.  You are addressing a model here, so that's why I'd like my new mac to not be infiltrated by bad things.  I cleaned as best as I can on my old mac.

  I think that I can choose what to take charge using a different method.  I discovered only where are my emails.  Use this as an example, do you think that it a bad idea for me to decide what to transfer?  I'd hate to lose points.  I really need to transfer all my word documents and software I use, for example, my family ancestry tree software.  Apart from the word, my tree (which has been downloaded using a disc), software emails, I can leave behind everything else.  Please give me your impressions.

  I suggest that you use the Migration Wizard. You might find this article helpful: move your content to a new Mac - Apple Support

• Satellite Pro L20 - no sound from the front speakers

  I just bought the laptop L20. Everything works fine apart from the front speakers. I don't get all the sounds on their part. Sound works very well since the head phone jack. I ran that the Toshiba diagnostic test and has not made all the sounds either. In the volume control window each volume slider is up and the Mute check boxes are checked. The obvious problem only in the window volume control which is the "PC Speaker" section is grayed out and cannot be selected. I installed the latest version of BIOS and drivers audio Toshiba Web site but not joy. Am I missing something obvious here? Any help would be appreciated.

  Hello

  If the sound works fine through headphones so I guess we're all ok with the onboard sound.
  There may be a malfunction of the speaker. If the laptop is under warranty all replacements are performed free of charge.
  The speakers are not very expensive and you should ask the service to help him.