sqldeveloper could not connect the newly created user

Similar Questions

• How can I get my account? "the user profile service could not connect..." User profile can not be downloaded... »

  I can't access my account... message says: "the user profile service could not connect..."  User profile can not be downloaded... »

  Help, please...

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I've attached a scan to an email, but it says "could not open the file C:\users\My Windows\AppData\Local\Microsoft\Windows |" Temporary Internet Files\Content.IE5\TQDLSO1A\etc, etc.

  I'm probably not explaining my problem fairly - well, I scanned something in - I used Nuance Paperport.  I have it attached to an email and sent to six people - including myself.  I always open the attached file to make sure that the computer has sent the right thing.  When I tried to open the attachment I got the message "cannot open the file - I have already sent you."  I think that Norton Security got rid of the file I need.  I think I will contact them.  I tried to contact Nuance - but alas, my warranty has expired, so no help there unless I want to pay for it.  If I can't have the problem solved through Norton, I will contact you again.  Thank you very much for taking the time to try to help me.  Have a great Thanksgiving action!

  ================================================
  Your explanation was nice... that was my answer that failed.

  I was hoping that you would simply copy the scan of your temporary
  Internet files folder and paste it on your desktop. Then you might
  evaluate what is the problem. I thought that trying to open
  with such a long way email could be a problem. And also... it's possible
  be a file association problem. And it could be a matter of file size.

  I understand that you care why the attachment to the email
  failure and I think you need to find what is the problem with the scan
  before fastening will be successful.

• Cannot open a session to the newly created user account

  I created a new standard user account via account management/accounts/user control.  When I log into the admin account and try to connect to the newly created account, I get the error message "the service user profile Service has no logon" "could not load user profile.  Click OK and it disconnects.  I can still log on to all the other 5 accounts that I created after I implemented this new laptop (preinstalled with windows 7).  When you click on a new account the first time, the system should establish the office and create the user records.

  I went into the Admin account and checking the application event log.  Event ID 1509 "Windows cannot copy file C:\Users\Default\ to the C:\Users\New Test Account\ location.  This error can be caused by insufficient security rights network problems. "DETAIL - access is denied.

  I solved my problem.  The index was at the event journal entry.  The permissions on the folder C:\Users\Default screwed up. (not sure how that happened).  I compared the authorization for this folder on my laptop win 7 with permissions for the same folder on my computer vista laptop.  Computer laptop win 7 has a few additional entries.  I deleted them and now I can create and open a session on new accounts on the laptop win 7.

• How to connect to the newly created user account?

  Original title: new account in picasa.

  I have 84, very computer illiterate, using Windows XP and I'm trying to work through the book "Picasa for Seniors.  The first thing he asked to do me is to create a new user account to use while I work my way through the book.  I created a new account, but cannot find anythiny on how to log in to the new account.    How can I do this?   Thanks for any help. Frank

  Hi Frank,.

  (a) If you restart or use change user, you will see the number of user accounts present your computer.

  (b) select the user want to log-in in the list account.

  
  Reference: How to create and configure user accounts in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• Delete operation does not remove the newly created line of VO

  Hi all

  I use Jdev 11.1.1.7

  I try to use a simple delete on a line of an af:table operation.

  The line is newly created (not in DB) and I have some autoSubmit = "true" defined on certain inputText of the table (not sure if it's relevant information).

  I followed the nice post of Andrejus on the immediate = "true" the button Delete.

  Andrejus Baranovskis Blog: Deleting line new form ADF (ADF followed Webinar)

  It works fine when I delete the line, it ignores validation and disappears from my af:table.

  But when I commit my transaction, all new lines, even those deleted, stored in DB.

  No idea what could be the problem?

  Let me know if you need me to post the code.

  Thanks for your time!

  I found the problem in the definition of my VO.

  The use of the entity has been defined with the property DeleteParticipant = "false"...

  What I don't understand is the reason why I had to go to the source to change, in the overview of the VO, the box is read-only...

• Insert new line in VO, engaging, and then call vo.executeQuery () does not display the newly created line.

  Hi guys

  I use jdev 12.1.2.

  I have a question about stale view object and entity data object.  My use case is: I have an af:table bound to data that I use to insert a new row in the database.  I create the line with a call from createWithParams, and everything works fine with it.  I call commit on the application module that contains the view object, and the data is correctly inserted in the database table.  Then, as part of my needs, I call vo.executeQuery () on the view object, however the newly inserted row is not present in the af: table or view object.  The line does not appear until I leave my application and return to it.  Once I do this, the line is in the object view and appears correctly in the table.

  It is not enough that I need the view object to be aware of the new line (s) without having to restart the application.  Y at - it a setting I am missing in my display object?  I guess my entity object contains stale data, but I don't know how to refresh its data.  Thanks for reading.

  Lance

  Hello

  you use a viewCriteria, so the value of this method of execution both (database and memory) in the Panel of viewCriteria

  try it once

  Thank you
  

• Tree of the newly created user table is empty

  Hi all
  
  I want to create a user who can only select a schema from a prisoner by one user.
  
  Create user test identified by Test1ng;
  grant create session to test;
  Grant select on a.table1 to test;
  
  The new user will use sqldeveloper and needs the tables is visible in the tab tables, but after completing the steps above test user when using sqldeveloper will see all the tables in the tab tables.
  
  Is there way to grant select test user on the tables in the diagram with the visible tables during the user test uses sqldeveloper?
  
  Thanks in advance

  Hello Hans,.

  A user sees only the tables held under its own Tables node. To see "table1", scroll down to the "Other users" node, and then expand users 'a' and look under this node Tables.

  Kind regards
  Gary
  SQL development team

• "windows could not find the directory"D:\user\my documents"."

  Hi all

  a big problem, but explain firstly my setup
  I have 4 discs 1 who's never been tied and still isn't so let's leave this one
  I have therefore 3 discs left
  2SSDs and 1 HARD drive
  1SSD contains my installation of windows, the other has a hackintosh installation, that will leave us out as well as it has nothing to do with it (the hackingtosh SSD)
  so that leaves us 1SSD with windows and 1 HARD disk for data (1 TB)
  During my first installation of windows, I didn't want my SSD to fill upward with the data, so for this reason that I moved the following folders on my HARD disk with letter path D:
  My documents
  My photos
  My music
  Downloads
  Desktop
  all of them have been moved using the proper method to move a directory of windows
  Now...
  Today, after turning off the computer, I unplugged the drive D: (HDD) and the SSD drive in order to bypass the need for a boot loader
  and here's the problem, after doing what I wanted to do, I'm once again, shut down the computer properly, readers still disconnected
  and then start reconnecting the SSD and HARD drive, both on the same site of the motherboard (although this should not matter)
  Thus, quite, I start Windows again, and he goes on to say that the folder my documents and one more records are missing, despite the drive connected.
  So I got start-> computer and check the drive and see if there's always my data
  problem; the Player isn't here, but IT IS mounted in some way
  in disk management, I'm going to understand what is happening, and disk management says there are only 100 MB "system reserved" partition NTFS
  This was not the case before, he a full 1 TB for the data partition, nothing for wall system
  I tried to mount the drive and finally managed to mount the system reserved partition by assigning a drive letter, however, when it opens, it does not contain anything
  If anyone can, please help me
  Encryption algorithm

  Disk 0 is my SSD that contains the windows installation, it has only 1 partition, System reserved partition has been somehow not on the SSD, but the disk HARD 1terra rather

  And since it showed my 1 terra as unallocated space, I thought that I lost all the data out there, so with that, I simply decided to reinstall windows and live with him I guess

  Seems to be a nasty bug if or should - not happen during the disconnection of the disks, and then reconnecting them?

  Thanks for your effort/response,

  Encryption algorithm

• cannot get past error - could not connect the user profile service

  My HP desktop computer has windows 7 - I can't get past - error message "user profile service failed to connect ' & 'impossible to load the user profile'!"  By clicking on the ICON that displays windows closes and repeats the error message read... a new user account must be defined the user upwards and copy the previous settings account - but I can't get there.

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Why the newly created user profiles are not lacking logon

  I created a new profile for my partner with administrative rights after you manually delete its an old. While trying to log the logon message

  Hello

  1. you have another account administrator created?

  If you have another account administrator created, you can use this tutorial. It has a "Fix it for me" application as a 'I'll fix it myself' instructions.

  http://support.Microsoft.com/kb/947215

  If this isn't the case, please follow the steps suggested by Mouneshwar R this link that talks about a similar problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/b627d0c9-03c4-465D-B268-2fd49e049e0c

  THIRD PARTY LINK WARNING

  WARNING: Microsoft does not provide any assurance or warranty, implied or otherwise, and is not responsible for the download, you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

• Droid Turbo could not connect the Cisco access point

  Greetings.

  Since the upgrade to a droid turbo, I was unable to connect to the network without wire of my work. I work in the it Department, but my experience with Cisco technologies and wireless is limited, so I tried to understand why. My previous bike x worked fine. We have a network of all the access points managed by a controller Cisco 4402 running version 7.0.98 of the BONES. I was able to connect to another wireless network that I could meet outside of work, and I am able to connect to the network of my work if I connect it is unsecured guest SSID. Only connections to our 4 secure networks fail. The controller reports that my phone cannot all simply to authenticate. The controller is configured for WPA2 / AES using a key 284 on the particular network, that I am trying to connect. I entered this key manually both via copy and paste. As far as my phone goes, I only tried to withdraw and time networks like tent to start it in safe mode without success. I read on various forums android that maybe it's a problem related to Kit Kat and this kind of problem has appeared on other handsets from other manufacturers, but nothing definite.

  Any suggestions would be much appreciated.

  -Josh

  Let me direct you to two other discussions here on the Droid Turbo forum and the other from Cisco which may help.

  Unable to connect to company wifi

  https://forums.Motorola.com/posts/af633eb3e4

  DROID WiFi Turbo questions

  https://forums.Motorola.com/posts/06a2f3c5ca

  Connectivity issues with Cisco and Moto X (Gen 2) allowed RMC controllers (probably related)

  https://supportforums.Cisco.com/discussion/12331486/connectivity-issues-Cisco-controllers-and-PMF-enabled-Moto-x-Gen-2

  I hope this helps!

• VMDKMounter gets error "could not open the virtual disk.

  I have two Win7 x 64 virtual machines running fine with VMware Fusion 4.1.2.  I installed VMDKMounter from VMware 3.1.3 and OSXFuse 2.3.9.  I can ride one of the files hard with VMDKMounter very well, but others told "Cannot open the virtual disk" when I try to mount it.

  8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: could not parse the instant string ' / Users/finchr/Documents/VirtualMachines.localized/hoth.univ.dir.wwu.edu.vmwarevm/hoth.univ.dir.wwu.edu.vmx '. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: will not be able to take an informed decision, based on partial information. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: mount the drive read-only instead. 8 June 14:43:27 hoth [0 x 0-0xe50e5].com.vmware.vmdkmounter [2394]: failed to open the disc: disc encoding error (261993021117)

  The virtual machine that VMDKMounter fails to mount was created by VMware vCenter Converter 5.0 of a physical machine.  The virtual machine that works was created in VMware Fusion 4.

  Of course, the hard I really want to ride with VMDKMounter is he who fails.  No idea how to make so that he can get?

  Well, I see nothing in the disc DescriptorFile which prevents the hard mounted.

  So right now, you can mount other hard files, but not this one, then I have two suggestions...

  It would be to use vmware-vdiskmanager to create a new hard that will not go up and the other would create a new empty hard, then add it to a virtual machine, as well as one that will not go up and then start with appropriate optical disk or an ISO Image containing the appropriate tools/utilities in order to image the drive to the new empty.  I usually use Symantec Norton Ghost for operations like this.  Then maybe a new mounts with VMDKMounter.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Could not connect to the local user accounts

  We have the following configuration:

  1. the virtual machine.

  Windows Server 2008 R2.

  b. active Directory

  2 physical machine.

  Windows Server 2008 R2.

  b. connection to the Server VMware View 5.0.1

  3. the virtual machine.

  Windows Server 2008 R2.

  b. connection to the Server VMware View 5.0.1

  Machine #2, we have connected successfully with VMware View and on machine #3 we have the following error:

  2012-11-13 17:28:10, 164 DEBUG < MessageFrameWorkDispatch > [ws_winauth] any logged-on user as a local user (domain = XREN1)
  2012-11-13 17:28:10, 165 DEBUG < TP-Processor3 > [VDIContext] ADAM connection failed: com.vmware.vdi.common.winauth.WinAuthCodifiedException: failed authentication: could not connect to the local user accounts
  2012-11-13 17:28:10, 166 DEBUG < TP-Processor3 > [VDIContext] failed connection create ADAM: com.vmware.vdi.adamwrapper.exceptions.ADAMConnectionFailedException: failed authentication: could not connect to the local user accounts
  2012-11-13 17:28:10, 167 INFO < TP-Processor3 > [LoginBean] user all failed to authenticate to view administrator
  2012-11-13 17:28:10, 167 DEBUG < TP-Processor3 > [ViewFlexFactory] com.vmware.vdi.admin.ui.LoginBean.login ms 13

  did you install the second server conection as a Local Administrator?

  a second connection to the Member Server in the domain before you install the software?

  be as a member of the domain using an account with local administrator privileges to be sure area.