APEX 4.2 classic report when more data found message

Similar Questions

• Sort the results of interactive report in no data found message

  Hello
  
  I have an interactive report that returns results based on the: bind variable QUERY - I have a list of navigation on the side where all the elements to link to the current page with different values of request. The IR works fine until I try to sort the columns by clicking on the heading and selecting increasing / decreasing, how it returns no data available.
  
  It starts to work again if I change the last line of GOLD: REQUEST IS NOT NULL but this breaks the functionality of the report, I would like to return only selected articles or all if no query variable is present. I'm guessing that sort sets: ASK something temporarily and divides. My query is below, any ideas?
  

  SELECT   id,
           job_number,
           appt_start,
           domain,
           pwa,
           status,
           tstamp_created 
    FROM   fail_jobs 
    WHERE  (status = 'NEW' AND userid_created != 'SYSTEM' AND :REQUEST = 'ARD') 
       OR  (status = 'ATR' AND :REQUEST = 'ATR')
       OR  (status IN ('ERR','REV') AND :REQUEST = 'REV')
       OR  (status = 'COM' AND :REQUEST = 'COM')
       OR  (status IN ('PCD','PCA') AND :REQUEST = 'PCD')
       OR  :REQUEST IS NULL

  Thank you

  There are problems with interactive reports referencing known: DEMAND value, probably due to an internal logic that manages also simultaneously - potentially cause a malfunction or blockages.

  A workaround that I learned is to create a calculation to assign: APPLICATION to a temporary element (a PXX_REQUEST, for example) and reference it in the query, instead of: ASK. This has worked well for me in my experience.

  I would like to know if this helps - pls sign the thread as 'Useful' or 'Correct' if so, so more people can benefit.

  TKS,
  Kléber

• Apex reported no data found message

  Is it possible to update all THE data found message? I would like to change to no records returned on all reports? Is it a setting in globalization?

  Concerning

  Spam says:

  Is it possible to update all THE data found message? I would like to change to no records returned on all reports? Is it a setting in globalization?

  Assuming a recent version of APEX (always specify what version you use when you ask a question): Home > Application Builder > Application > utilities > utility area > grid edit all Messages to find data no..

  Change them all to refer to a static text substitution string (e.g. & NO_DATA_FOUND_MSG) defined in the application definition, if the message must only be maintained in one place.

• exception: when no data found

  Hello
  I want to assign a variable var1 leave a select query
  Select attr1 in var1 from table1 where (condition)
  So I want to 0 when no data found in this application, without throwing an exception, the attr1 value so without stopping the program
  someone has an idea?
  
  Thank you
  concerning
  ELYES

  Hope this helps:

  DECLARE
  v_count PLS_INTEGER;
  BEGIN
  SELECT COUNT(1) INTO v_count FROM TABLE1 WHERE (CONDITION);
  
  IF v_count = 0 THEN
  DBMS_OUTPUT.PUT_LINE('NO DATA FOUND');
  ELSE
  DBMS_OUTPUT.PUT_LINE('DATA AVAILABLE');
  END IF;
  
  EXCEPTION
  WHEN OTHERS THEN
  DBMS_OUTPUT.PUT_LINE('OTHER EXCEPTION');
  END;
  

• Change/Remove "No data found" Message

  Hi all

  How can I change or delete no data found message?

  I can change it by using report attributes > messages > when no data found > (Personal Message), but how can I change/remove it globally (for all the application)?

  Thank you

  Chandra

  Chandra,

  There is a possible way to remove without data Message found at one time to go to

  Modify Application > utilities > specific utilities (appear in the right sidebar) page > region utility > utility region report > grid edit all data found Message numbers

  Here you can write your personal message for each report at a time.

  Leave.

• How to avoid the total general of the classic report when the column break is installed in the Apex

  Hi all

  I develop application using Oracle Apex 4.2.0.

  I created the classic report Page.

  That I have summarized a column by selecting the check box check sum for the column.

  His shows the Grand Total.

  Then I chose the columns to break to the first column.

  His show the total groupwise and total as well as great as image below.

  

  My requirement is

  Need to hide total(Total:)) GroupWise or total general. I need to show any a total, not both.

  How to do this?

  Thank you

  Su.GI

  Su.GI wrote:

  Hi, thanks for your response.

  I use theme - productivity Application - issue 26

  -Standard model

  Report - report of Standart for classic report model.

  The above CSS code where I want to use in the page or report or model region.

  Specify a static region ID for the report area and put the following CSS rule in the CSS Inline property page:

  #static-region-id .uReportStandard tr:last-child td {
    display: none;
  }
  

  where static-region-id is the ID specified for the region.

• change the color of line based on the value of column 5 Apex in the classic report

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Hello

  I know this question has been asked several times here, but I'm working on 5 Apex and need to know the correct way to do it in this version.

  I need to change the color of the text of the entire line (no background color) based on the value in one of the columns of the classic report. I have just two conditions, if the value of column = Yes, color should be red, otherwise it must be green.

  I am new to jscript and css, so appreciate if someone can tell me the solution with steps.

  I have already checked this link that changes the value of the column, need to do something similar to the whole line.

  https://tylermuth.WordPress.com/2007/12/01/conditional-column-formatting-in-apex/

  Hi coolmaddy007-Oracle,.

  Here's an example set up on the apex.oracle.com according to the specifications you gave: https://apex.oracle.com/pls/apex/f?p=35467:1

  Version of the apex 5.0.0.00.31

  Standard universal theme

  Page theme default template

  Classic report

  Foldable report template

  Here is how it is done:

  Create a dynamic action with the following specifications:

  Name: Give the appropriate name

  Event: After refresh

  Selection type: region

  Region: select your region classic report

  Condition: No strings attached

  Action: Run the JavaScript Code

  Fire on loading the Page: Yes

  Code:

  $('td[headers="JOB"]').each(function() {
    if ( $(this).text() === 'MANAGER' ) {
      $(this).closest('tr').find('td').css({"color":"red"});
    }
    if ( $(this).text() === 'SALESMAN' ) {
      $(this).closest('tr').find('td').css({"color":"green"});
    }
    if ( $(this).text() === 'CLERK' ) {
      $(this).closest('tr').find('td').css({"color":"blue"});
    }
  });
  

  NOTE: Download the selector appropriate for your knowledge $('td[headers="JOB"]') case using firebug/browser development tools.

  Items concerned: leave blank.

  PS: Changed the example to change the color of text instead of the background color.

  I hope this helps!

  Kind regards

  Kiran

• Redirect when no data found

  Using Apex 4.1.1
  
  I need my application to redirect to another page when the user performs a search and there is no data found. The query in the report is too complicated and is a "Body of function from PL/SQL returning SQL query" and must be like that. It just does not work on its own.
  
  Initially, I tried to Javascript to run onLoad & run loading Page like:
  

  function redirect_on_no_data_found2()
  {
       
       // if user came from non-catalogue page
       if($(".nodatafound").html() == "no data found")
       {     
            redirect('f?p=129:8:'+$v('P1_SESSION_ID_VALUE')+':NO_DATA_FOUND:NO::');
       }
       
  }

  But javascript as it's too unreliable in IE 7, which is what users use and does not work in some cases while in others works.
  
  
  Is there another way I could do a redirect without javascript or using the APEX_APPLICATION.redirect procedure. Little short of ideas.
  
  Thank you very much.

  Hello

  I wrote this blog post where is also link to example
  http://dbswh.webhop.NET/HTMLDB/f?p=blog:read:0:article:6611800346018314

  I have test, you must use a fixed value as function APEX_UTIL. SAVEKEY_VC2 call parameter and select the double wrap.
  In this way, the function is called only once in the report query.

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• cover of "no data found" message in the interactive report

  I have looked around and cannot know what is happening. Any help would be greatly appreciated.
  
  I have an interactive report that, when no data is found, displays the message "no data found" wrapping tight. I have uploaded a screenshot of it to TinyPic for you to see what I see.
  
  The HTML code generated around the text "no data found" is the following.
  
  >
  < DIV id = "apexir_DATA_PANEL" >
  < TABLE summary = "" >
  < TBODY >
  < b >
  < TD >
  < TABLE id = "12352007490697832" class = "apexir_WORKSHEET_DATA" border = "0" cellSpacing = "0" summary = "" cellPadding = "0" > "
  < SPAN class = "fielddata" >
  No communications have been found in the system.
  </span >
  < /table >
  < Table >
  < /TR >
  < Table >
  < /TR >
  < / TBODY >
  < /table >
  < / DIV >
  >
  
  I looked in the HTML code that is generated for the page, but cannot understand why words are packaging. Any thoughts?
  
  Shane.

  Hello

  I see exactly what is happening. It could be your theme that does this - or maybe you are using the version of Apex.

  I just did a test (with Apex 4, issue 18), and as though all the tags TABLE, TR and TD, I get a SPAN tag around the text:

  <span class="fielddata">No submissions were found in the system.</span>
  

  Try adding COVER tags around your text and see if that helps.

  Andy

• Query report back "No data found" with bind variables

  I put a simple query in the report query:
  
  Select "bluefish". 'name' as 'name',
  "bluefish". "" primary_flag "as"primary_flag. "
  "bluefish". "" status "than"status. "
  "bluefish". ' ' ID ' as 'ID' of "bluefish" "bluefish" where "bluefish". "" ID "=: P3_XPRINTID
  
  When I test the query, the data is returned. However, when I try to run the query using the "Test report" button, I get an error 01403 no data found. If I replace the link with an explicit value variable, the report runs.
  
  Anyone have any ideas as to what is causing this problem? I use the generic report layout, with different types of output. I'M editting the query and set the binding variable before test report (otherwise, the query is not executed).
  
  Charles

  In fact the report would go - unlike other products of Oracle who complain about a missing binding variable, Apex is not complaining but interprets as a null value. So if you hurt typed the name of your variable, you are never alerted to it.

  Check the Session window to make sure that it is a value - the most common questions are that you named the wrong variable in the query or your item has no value in session state again.

• How to hide the buttons when no data found!

  Hi all
  
  I created two regions
  
  1 Serach region
  2 results region.
  
  Initially during the loading of the page with the help of hidden drive I'm Basel to hide 'areas of results' once that they clik this serach button I display area with teo translated region more buttons as buttons 'export' and 'print '.
  
  It shows very well when there is data in the region of Reulst.
  But when there is no return I displays the message "No data found" but at the same time it displays 'export' and buutons 'print '.
  This button should show only when data are available in the results area.
  
  Thank you
  David...

  abhishek8299 wrote:
  Use SQL statements (Exists) in the State and write an sql statement it.

  Use this

  SELECT
  1
  FROM form1 MF,bench1 BM,
  participant1 PP,key1 KT
  WHERE MF.ENGAGEMENT_ID=BM.ENGAGEMENT_ID
  AND BM.ENGAGEMENT_ID =PP.ENGAGEMENT_ID
  AND PP.ENGAGEMENT_ID =KT.ENGAGEMENT_ID
  

• No data found message

  Hi all
  I have a cursor and when there is no data found an error message must meet. Can someone help me to do this
  
  cursor c_user (p_username in VARCHAR2
  ) is
  SELECT *.
  OF qhr_employee emp
  Upper WHERE (emp. USER name) = upper (p_username)
  AND to_date(sysdate,'dd-mm-yyyy') > = to_date (emp. Start_date, 'dd-mm-yyyy');

  I can hardly believe that the procedure that you have published is in fact to launch a mistake any except 20001 or 20002. You have a when other hider of exception that don't re - not raise the error, so you shouldn't see any other errors. A procedure like yours will never throw this error 6503. There is clearly something that don't show us you.

  (If one) you correctly report the error and b) are actually something run with a vague resemblance with the code you posted, then saw the error ORA-06503, I think that one of the gen_functions. DATEDIFF or qhr_gen_functions.f_get_sys_param causes the error because you call it incorrectly, or because it is poorly written.

  Remove the when appropriate other hider error in your procedure in order to get a stack of error. It should tell you that the function returns the error.

  John

• No data found message in the BI Publisher data model?

  Hello
  
  I built a BEEP report, based on the data model.
  Please advice if there is no data returned by the query, how to display an error message something like 'no data found with above settings.
  
  Thank you
  Murali.

  Murali

  If there is no data then the generated XML will be empty of data but won't be valid. If all you need to do in the layout template is something like

  No data found

  where INVOICES is a repeated group waited in the data

  Tim

• How to set the number of lines displayed in a classic report when running?

  Hello
  
  Our client has several hardware configuration standard customer and want to allow end-users to choose their 'view profile' at the time of the connection. This "display profile" would contain some predefined values for these configurations material and supposed to give various parameters that must set the number of lines displayed in a classic regional report.
  
  I tried to provide parameters on the report of the region, but he has refused to accept anything other than numeric values. Is it possible to do?
  
  Best regards, Tamas

  The link is about the closest correlate in the documentation to the description of the attribute Number of Rows (point) .

  Looks like you tried to write - in vain - a name string or change of item in the attribute Number of Rows . The attribute Number of Rows (point) is the one that can actually do. For a list of items in the application, click the icon of the flashlight next to her.

• BlackBerry classic Facebook App classic mistake when you type a message

  When you type a classic Facebook Message in a longer conversation, the text you write, will be hidden by the bar on the

  bottom of the screen, if you don't see what you are typing. I don't know if it's a Facebook app or the classic error, but he certainly needs a correction.

  Hi @RobertP

  I wanted to check and see if you have had a chance to update to Facebook for BlackBerry 10 v10.5.31.4.

  This version from the text field in the process of disappearance so if you can do a quick test and confirm that it is resolved would be great!  Thank you