APEX5: How to use User(Logged In) Image throughout the application

Similar Questions

• How to create users that can connect to the application?

  Hello
  
  
  As an example of Application provided by APEX, in this application, the administrator can create users and reset passwords, and the user can connect to this application. How is this happening?
  
  Now I know how to create users and reset passwords through the corresponding working table.
  
  But I don't know how to use the user to to connect to the application? I tried several times to use the user create by ADMIN to connect to the application, but I failed.
  
  I can't find any setting in the sample Application, but it do.
  
  If any good plans?
  
  I thank in advance.

  There are two ways you can handle this... Build users of the APEX and continued them through the api of the APEX (not recommended by what I saw several comments here, outside the development environment) OR in your application, you could build a custom authentication system...

  Here is a link to explain how make one:
  http://djmein.blogspot.com/2007/07/custom-authentication-authorisation.html

  Thank you

  Tony Miller
  Webster, TX

• How to use reveal all this without losing the work of culture?

  My workflow is to editing and cropping of images. I need the flexibility to perform any order.

  When I use the crop tool, I continue to delete the cropped Pixels unchecked. When I edit the images I want to edit the complete picture, not cropped image.

  If I use reveal all to make alterations on the full image after cropping, I lose my job of cropping. Is there a solution?

  How to use reveal all this without losing the work of culture?

  How to take a bath without getting wet?

  Enter drollery side you could use a path of access to store the current size before calling "Reveal everything", then later on the path as a selection of load, switch to the crop tool and hit.

  Or convert to smart object before you crop, then do the editing in the SO (it could be a potentially significant increase in file size, however).

• How can I extract images of the application "Photos of Macintosh" in the Lightroom?

  How can I extract images of the application "Photos of Macintosh" in the Lightroom?

  I know, but it must be on the hard disk, to retrieve an individual photo appears

  be a daunting task... Need help...

  See you soon

  In Photos, select all the photos you want to put in LR; Select "Export" in the file menu and export to a new folder on your hard drive.  Finally in Lightroom, import pictures into this new folder.

• How can I keep a visible image at the end of the EP 13?

  When my videos ends EP 13, it becomes black. How can I keep a visible image at the end?

  crimpers

  So far my YouTube video playback are all ending with the game again screen with a bunch of photos to the videos that are not mine.

  I explore the concept of thumbnails of video in YouTube.

  Video thumbnails - YouTube help

  Which seems to imply that what you see before the play button is hit.

  I found the following

  How to pause youtube video embedded on the last picture? -Stack overflow

  But, still trying to understand how they actually follow through on the details of the discussion.

  RTA

• I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code?

  I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code? Thank you!

  Read the help section of DW on models.

  Using Dreamweaver | Creating a Dreamweaver template

  Or use Server-Side Includes

  Nancy O.

• I'm trying to scan a document using my dell scanner, but I get the message: 'an image to the application of the texts is provided for you on your cd in the OCR file.

  Original title: Dell Imaging toolbox: analysis: change Image text

  Trying to scan a document, I get the message: an image to the application of the texts is provided for you on your cd in the OCR file.

  -Cancel, install your ocr software, try again.

  There is no image to the application of the texts in the file of the ocr, Abbyy and Recore and neither has the image of the application of the texts.  Heeeelp!

  Communicate with people who have done your scanner and ask them to supply the missing software.  Without this you will not be able to proceed.

  "blessedandhighlyfavored" wrote in the new message: * e-mail address is removed from the privacy... *

  Trying to scan a document, I get the message: an image to the application of the texts is provided for you on your cd in the OCR file.

  -Cancel, install your ocr software, try again.

  There is no image to the application of the texts in the file of the ocr, Abbyy and Recore and neither has the image of the application of the texts.  Heeeelp!

• Rstrui.exe - bad Image of the application or DLL C:\Windows\System32\Wbem\Framedyn.dll is not a valid windows image. AND the exe task manager. -Bad guess. The application or DLL C:\Windows\System32\VDMDBG. DLL is not a valid windows image.

  I use WIndows XP.  After that THINKPOINT is presented on my system, I have not been able to access my task manager or restore my system to an earlier date.

  I have checked Kellys Korner and various other suggestions on the internet, but have had no luck with anything.

  It shows that the HKEY value for the Task Manager is set to 0.  Don't know if that helps.

  I BELIEVE I have the THINK POINT removed from my system.  I use Microsoft Security, Ad-Ware and Malwarebytes Anti - Malware.  Between the 3, it seems I have everything.

  But now I can not restore my system, or use my TASK MANAGER.

  Help would be GREATLY appreciated.

  Thank you!

  Bindifer

  Think like a malicious software...
  It infects your system and is not to be found and removed.
  What are you most likely to use to find and remove malware?
  Internet, Google, Task Manager, regedit, restore the system command prompt, etc...
  The malware is often afflicts one or more of these components to try to trick into thinking you need to perform a system restore, a repair facility, or even to reinstall your XP from scratch.  None of these things are necessary since you can usually just to thwart malware.
  If the referenced files are completely absent from your system, you will see messages like this when you try to run the applications:
  Taskmgr.exe - Unable to locate component
  This application has failed to start because VDMDBG.dll is not found.  Reinstalling the application may fix this problem.
  Rstrui.exe - Unable to locate component
  This application has failed to start because framedyn.dll was not found.  Reinstalling the application may fix this problem.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  If the referenced files are present on the system, but somehow corrupted, you will see messages like this when you try to run the applications:
  Taskmgr.exe - bad Image
  The application or DLL C:\WINDOWS\system32\VDMDBG.dll is not a valid Windows image.  Please check this against your installation diskette.
  Rstrui.exe - bad Image
  The application or DLL C:\WINDOWS\system32\wbem\framedyn.dll is not a valid Windows image.  Please check this against your installation diskette.
  Sometimes you can click through the OK messages to access the System Restore screen, but the restoration of the system is still broken.
  These files are part of the file 3498 who cares about Windows File Protection, so unless the WFP is also broken it is likely that files are missing completely (you get a different error message).  What is more likely is that the files are somehow corrupt or have been replaced by incorrect files.
  Assuming that XP is installed on your C drive and in the windows folder, XP keeps copies of 3498 files that he cares about this issue:
  c:\Windows\System32\dllcache
  On a health care system, Windows File Protection keeps track of 3498 protected files and quickly and quietly replaces all the files in the list that appears missing from the backup folder.  File protection Windows will not replace the files if they are somehow corrupted or replaced by bad files.
  You can simply copy the backup files in the dllcache folder in the folder where are the suspects or missing files.
  Using Explorer, navigate to the folder c:\windows\system32\dllcache and individually to copy the backup files in there and then navigate the folders where the suspect or incorrect files are and paste in the copied files.
  Depending on your installation, you can also find copies of the files in this folder:
  c:\windows\ServicePackFiles\i386
  Answer Yes, if you are prompted to replace existing files.
  Test your functions now and then to reboot your system to make sure the changes 'stick', and then fix any problems.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image.

  At the start this morning, I received the message following "services.exe - bad image" and "the application or the DLL...\ShimEng.dll is not a valid Windows image. Is there a simple solution to this problem? If it is ok, the unit freezes then

  Hello

  1. you remember to make changes to your computer, after which the issue started?

  I would recommend that you follow these steps and check if the problem persists.

  Step 1:

  I would recommend that you run a full scan using theMicrosoft Safety Scanner and check if the problem is related to malicious software.

  Note: You may lose data while eliminating malware.

  Step 2:

  Test the issue in a clean bootand verify if the issue.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Make SFC scan and check if the problem persists.

• How to increase space of a page in the application designer?

  People,
  
  Hello. I developed a page in the application designer.
  
  I need to place several records with several fields on the page. But all of the space of the page is not enough to place the fields. We must use a vertical scroll to increase the space on the page to contain all fields. But I don't understand how this feature.
  
  Can people tell me how to increase space of a page in the application designer to y to keep many fields?

  Try to use the properties of the page, the page size - custom

  Subhash

• My Lightroom membership had expired, I have come to renew, but cannot develop images in the application. I have to wait so he could treat or re install the app or something?

  My Lightroom membership had expired, I have come to renew, but cannot develop images in the application. I have to wait so he could treat or re install the app or something?

  Hi lausworld,

  Please see the troubleshooting link below.

  Reference: creative judgment Cloud 2015 to return to the mode of trial

  Let us know if that helps.

  Kind regards

  Mohit

• How to get a user logged in (NAME of the END USER) in the APEX?

  Hi all
  
  I have Apex 3.1.2 Oracle 10 g 2.
  
  I have an integrated application, I need to print a REPORT based on the user who runs the application. While building the app, I used Application Express - authentication schemes and created an END USER.
  
  But, when the report is run, I get the error. This is because it takes the ANONYMOUS user name. How to get the user_name of the logged-on user?
  
  Thanks in advance.
  
  Guru
  
  Published by: guru Perrin on October 14, 2008 16:25
  Modified subject line

  Hi guru,.

  You can use the & APP_USER. application for this variable. He was replaced when executing, in the name of the user connected.

  Edit: PS
  Don't forget the point. in the end ;)

  Hope this helps,
  Greetings,
  Rutger

  Published by: Rutger_de_Ruiter on October 14, 2008 03:57

• How to use this formula for images?

  Hello!

  I'm new to Labview and I don't get the following problem.

  What I want to do is to use the following formula with three colors BMP

  I = sqrt [(I1-I2) ^ 2 + (I1 - I3) ^ 2 + (I2 - I3) ^ 2] I is the intensity resulting, I1, I2, I3 are the intensities of three images.

  For the moment, I use images already recorded, later I would get from a camera (get 1 image, move Piezo; get 2 picture, move Piezo...)

  I tried to convert the images to the bays and apply the formula to them, but that didn't work.

  So, how do this calculation?

  Is it possible to transmit images to Matlab? (I used Matlab for now and its working fine, but I need to automate the entire process)

  I hope someone can help ^^

  Pandamutze

  PS: I use Labview Version 8.6, including LabviewVision

  the problem is almost solved. I get the right image, just a bit darker than the resulting image of matlab computation

  I have attached my last VI if anyone is interested

  Thanks to you, think of your hundred helped a lot ^^

  Kind regards

  Pandamutze

• How to add legend for all images in the indesign document using indesign javscript

  I want to add the legend for all images in the indesign document...

  It's my code... im being of error like:

  invalid parameter.

  capset(2) ();

  function capset()

  {

  var doc = app.activeDocument;

  var myPicture = doc.allGraphics;

  var f, i, myCaption;

  While (PIC = myPicture.pop ())

  {

  f = pic.geometricBounds;

  Add a frame to the parent of the image, which is a Page

  myCaption = pic.parent.textFrames.add ();

  define the position and size of the legend

  myCaption.geometricBounds = [[2], [1], [2] Go + 3 GB [3]];

  Add the contents of the placeholder

  myCaption.contents = "Caption";

  PIC.parent.groups.Add ([pic, myCaption]);

  }

  }

  Hello

  Runing a code with your doc that you note possible occurrences (groups, the elements anchored, locked, etc items)

  This presupposes to exclude grouped and docked:

  capset ();
  
  function capset()
  {
  var
    mDoc = app.activeDocument,
    // anchored or grouped items excluded
    myGraphics = mDoc.splineItems.everyItem().getElements(),
    picContainer, gb, myCaption;
  while(picContainer = myGraphics.pop() )
  {
    // exclude empty frames
    if (!picContainer.graphics.length) continue;
    gb= picContainer.geometricBounds;
    // add a frame to to picture's parent, which is a Page
    myCaption = picContainer.parent.textFrames.add ();
    // set position and size of the caption
    myCaption.geometricBounds = [gb[2], gb[1], gb[2]+3, gb[3]];
    // add placeholder contents
    myCaption.contents = "Caption";
    mDoc.groups.add ([picContainer, myCaption]);
    }
  }
  

  Jarek

• HOW CAN I ADD MY OWN IMAGE ON THE SCREEN OF WINDOWS 8 START

  Greetings.

  Let's be clear, as clear as I can be without realizing the term Microsoft applies to this new application in Windows.

  When you click Start in Windows 8, there is an image behind the tiles. I want my own image, which is an image from my Gallery, behind the tiles.

  When you click on the charm of settings and select Customize, you are allowed to choose among 20 preloaded images, with 20 being your current desktop image. I would use a still image without making changes to my desktop.

  I can not even find the location of the file for the preloaded images! If I knew where they were stored, I could add my own image library.

  I use a similar technigue to make my wallpapers available for all users: my wallpaper screen images has just moved into the Windows\Web\Wallpaper folder.

  Similarly, I do some of my available desktop themes to all users by copying them in the Users\Default\AppData\Local\Microsoft\Windows\Themes folder.

  I even load my own sounds in the Windows\Media folder. Thus, all users have access to the sounds I like to use.

  But I can not find the folder where are these images pre-loaded Windows 8 start... AND I don't like these preloaded images, I want to use one of my own!

  How can I change the image of Windows 8 start behind my tiles?

  This is not possible, Mr President.

  You can have transparent so that your background shows through (option 20 as you mentioned it).

  Other components don't cry pictures. They are programming that built graphical objects, a lot as well as additional programming that prompts them to move when you scroll for artistic effect and provide options to change the colors of this product graphic objects programmatically.

  But there is no 'image' to display or replace, because none of those are actually pictures at all.

  I'm sorry.