AppData\Roaming\diskmgmtn.dll is not found
I got up this Rundll msg on start
Error Msg:
"There was a problem starting C:\Users\bonn\AppData\Roaming\diskmgmtn.dll.
The specified module could not be found. »
I remember Norman Security Suite that detected as a suspect and has been deleted.
THE SYSTEM CONFIGURATION--> START
Startup item: myenqxift
Manufacturer: unknown
Command: rundll32 "C:\Users\bonn\AppData\Roaming\diskmgmtn.dll",Engbcsxs. "
Location: HKCU\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
How to solve this problem?
Download and run the free Windows Sysinternals Autoruns program. It allows to find and remove the reference to C:\Users\bonn\AppData\Roaming\diskmgmtn.dll Boulder computer Maven
Most Microsoft Valuable Professional
Tags: Windows
Similar Questions
-
Whenever I have connect my system, the error message appears which displays
"There was a problem starting, the specified module could not be found."
and sometimes,.
"C:\Users\Dell\AppData\Roaming\mapnc.dll" is not exist.
How can I solve this problem? Please help me. The information system is given below,
Name of the operating system Microsoft Windows 7 Ultimate
Version 6.1.7601 Service Pack 1 Build 7601
Manufacturer of operating system Microsoft Corporation
System model Inspiron N5010
System Type X 86-based PC
Processor Intel (r) Core i5 CPU M 460 @ 2.53 GHz, 2528 Mhz, 2 Lossnay, 4 logical processors
A09 BIOS Version/Date Dell Inc., 19/10/2010
SMBIOS Version 2.6
Physical memory (RAM) installed 4.00 GB
1.86 GB available physical memory
5.85 GB total virtual memory
4.47 GB available virtual memory
2.93 GB page file space
Paging file C:\pagefile.sysAvira Antivirus Premium is also installed on the system. The error message from the last weak. However, the system had no no ill effect after that.
Hello
Thank you for writing to Microsoft Communities.
1. have there been recent changes to the computer before the show?
Please go ahead and follow the steps mentioned from the link and later a update on the State of the question.
Method 1: Try to start the system in safe mode and check if the same problem occurs.
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Method 2: If the issue does not exist in Mode safe mode then try to put your computer in a clean boot state.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.
Please follow these recommended steps and post if you still experience the problem.
-
The rebouting system, he just notice:...\AppData\local\athort.dll was not found or if
Hello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
-
Roaming\rvfet.dll is not found
Error message RunDLL - Vista Start causes
Error loading C:\Users\xxxx\AppData\Roaming\rvfet.dll
The specified module could not be found
I am suspicious it is the reason why my installation of the HP Photosmart software does not work.
Any ideas?
Hello
Google has little information about this file, so it's probably a Malware startup more entry left which has been removed from your security programs.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
____________________________________
Same problem you got here almost 12 months ago:
See you soon.
-
c:/users/mark/App Data /Roaming vdmgi.dll is not found
When I started the window open easily, but on the screen it just this error - on top of dialog - Run DLL...
After next to the dialog box - c: / users/mark/App Data /Roaming /vdmgi.dll.after than threr was written, the specicied module is not found. then what should I do for that matter.Original title:from on the desk, on the screen, display under dialogue.Hello
When you ask a question here, you should always tell us to what is your operating system.
For "vdmgi.dll" Google comes up with a lot of gibberish in the search results, which suggests it's a boot remains against malware entry that your AV has partially withdrawn.
These steps are basically the same for XP, Vista and Windows 7
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
See you soon.
-
I had a virus on my computer running Windows 7 Professional, which extinguished the Microsoft Essentials. After removing the virus Microsoft Essentials would not start. Asked me to uninstall Microsoft Essential and download a new version from the Microsoft Download site. This has been done. Now, Microsoft Security Essentials is operational but to restart the computer, an error message appears indicating that the App Data/Roaming/Lbtobr.dll module is not found.
I don't know what this message means and the implications of this missing on the functioning of the PC module
I'd appreciate the help.
Thank you
UK.Lbtobr.dll does not seem to be a Windows file, perhaps a left over the entry of file of your malware infection?
See if you cam work method for the file start and stop it from loading or attempt to load.
Autoruns for Windows v11.3
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxTry the Safe Mode too.
Startup options (including safe mode)
http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-modeHow to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/default.aspx/KB/929135 -
When I start my computer windows vista, there is always a pop ups box indicating
RunDLL
Error loading C;\users\user\AppData\Roaming\nmhciu.dll
C;\users\user\AppData\Roaming\nmhciu.dll is not a win32 applicationHi M.A.Rawat,
· Did you do changes on the computer before the show?
I suggest you to check and clean the boot if the problem persists.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
Hello
I keep having this message arrived on my computer when it starts:Error loading c:\users\steve&jenny3\Appdata\roaming\pdiner.dllI also can't add new software or windows updates. I checked the error code 80246008 and followed the steps but the BITs service does not appear in the services, so I don't know what to do.I tried to do the "Mr, fix" help on help from microsoft, but could not send information to microsoft to help me with my problem.Could someone help me please?A big thank you JennyTake a look at this great site for some removal instructions. This is an alternative to the TDSSKiller
For Root Kits (rather than TDSSKiller)
http://public.avast.com/~Gmerek/aswMBR.htm
http://www.selectrealsecurity.com/malware-removal-Guide/
I hope this helps.
-
Original title: error kbdkyr9.dll
I get this error code when I start my computer on the desktop a box appears and says
Error loading C:\Users\Owner\Appdata\Roaming\KBDKYR9.dll
KBDKYR9.dll is not a valid Win32 Application
Can someone help me with this please? Also, I tried to download a fix cleaner and it did nothing... I still have it.
Nicole
Hi Nicole,.
1. what changes have been made to your computer before this error message?
Follow these steps and check if the problem persists.
Step 1:
I suggest you put your computer in a clean boot State.
Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you can go ahead and disable or uninstall the same.Note: Put your computer in normal mode by following step 7 of the hyperlink after you identify the third-party application that caused the problem to occurStep 2:
It can also be caused by a virus, I wish that you run a full scan of the PC using your updated security software or a scanner using the Microsoft Safety Scanner.
-
Hello
Whenever I start windows, the RUN DLL message box appears and says "C:\Users\[user name]\AppData\Roaming\llytsw.dll the specified module could not be found.
I scanned the system with Autoruns v10.07 and found these details.
The AutoRun entry: oiheappm
Image path: file not found: C:\Users\Sivarajan\AppData\Roaming\llytsw.dllIn the registry editor, found these details
Computer\HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
Name: oiheappm
Type: REG_SZ
Data: rundll32.exe "C:\Users\Sivarajan\AppData\Roaming\llytsw.dll", aynbjtSystem details:
Operating system: Windows Vista Home Premium 32-bit with Service Pack 2 installed
Model: HP Pavilion dv6330ea Entertainment Notebook PC
Processor: Intel Core Duo T2350 @1 CPU. 86 GHz 1.87 GHz
(Vivid RAM) memory: 2.00 GBWhat can I do to remove this pop up when I started windows?
I really appreciate the help as soon as possible.
If possible, please explain why this pop up doesn't have to run, what it does, etc.
Thank you
Bye,.
SivaThe file is not on your system. There is only a registry entry that is refencing a nonexistent file. That's why you get the message.
If you disable the entry in Autoruns, Autoruns moves the registry entry to another location so that it is not used during Windows startup.
If you want to permanently delete the registry entry, right-click in Autoruns and click on delete. Or you can remove the entry from the registry using Regedit.
-
I get this message every time I turn on my computer:
C:\Users\Martha\AppData\Roaming\Retui.dll
What does that mean?
Hello, Martha.
This means that you junk!
Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
1. after the download is complete, select autoruns & right click on it
2. click on "extract here".
3. on the extracted files, click "autoruns" application select it & right click and click"Openor run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
4. what which is complete, Open or run "autoruns".
5. in the opened window, click 'all'.
6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
7 right-click & click delete & okHe helped?
-
module ivuxoqoya.dll is not found
On startup, I get this error message with a "appdata". I cleaned my disk and it still appears and a drive next to my pointer just keeps turning. The full message is the module ivuxoqoya.dll is not found
This forum is for posting comments on the web site of Microsoft Answers, is not for technical questions. Post your question in the forum Windows here: http://answers.microsoft.com/en-us/windows/forum
It sounds like malware to me. This module is not part of what Google can locate.
-
When I start my PC I get two dialog boxes with messages
Error loading C:\Users\Herb\AppData\Roaming\usdms.dll
ANDError loading C:\Users\Herb\AppData\Roaming\rvfet.dll
It seems that some program trying to load at startup and can not find anything.
Once I close the dialog windows everything works fine.
Any ideas?
Herb
Hello
Google has little information on this subject, it seems to be a left on the shape of the boot entry Malware that has been removed from your security programs.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
"How to use MSCONFIG in Windows Vista"
http://www.netsquirrel.com/Msconfig/msconfig_vista.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
-
Original title: it appears whenever I start my computer
Run DLL error loading C:\users\MikeD\AppData\Roaming\Microsft1.dll
Hello1. don't you make changes to the computer until the problem occurred?I suggest you to follow the steps below and check if it helps.Method 1:Try to scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.Method 2:Also try to set up your computer in a clean boot state, and check if the same issue occurs.By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.Hope this information is useful. -
From the start of my PC (with windows Vista), I always get a message: "load - User\Name\Appdata\Roaming\iasnapw.dll - access denied error" in any case I can still use my PC normally. What does this message and how to resolve this error.
Thank youA. WahyanHello
Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/MBAM.php
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If the error persists after scanning use this program to out startup
This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.
Maybe you are looking for
-
10 charts of Thunderbird Windows are not correctly RESOLVED caused by hardware acceleration
All my Thunderbird 38.0.1 graphics do not correctly display in Windows 10 (10130)
-
This always happens when click on something... .and cannot get the cursor back a few seconds... will not link or to open a page... asks what I want to stop or continue plugin.Thank you!
-
Cannot open the preferences of safari OS x 10.6.8
preferences of Safari will not open OS x 10.6.8
-
Airport Extreme a different IP address than the NEST
Hi all I have an Airport Extreme new set up a network of comments. The guest network is configured for the IP addresses in the 172.16... range, compared to the 192.168 range (which is for the network no comments). I put my nest on the network of com
-
Mouse and keyboard not working only not to the login screen
Hi, I was recently infected with Antispyware Soft virus. In my attempt to remove it, my screen went black, so I had to restart my computer. Entering my login screen, I was unable to connect because my keyboard and mouse no longer works. I tried to st