Apple Mail will not show my mail messages

Similar Questions

• My Apple Watch will not show its display and its new brand

  MY wife has paired his brand new iwatch all at the time and now the screen is empty, even if the watch is in talks with him

  Hello

  Voice-over (a function of accessibility that includes screen curtain) has been activated on your wife watch.

  • To turn off VoiceOver:
    • On the iPhone of your wife, in the application of the watch, go to: My Watch (tab) > general > accessibility > VoiceOver > disable VoiceOver and screen curtain.
    • Or use Siri: press and hold the digital Crown until your wife feels a slap on her wrist > and then say: "Disable VoiceOver."
  • If the accessibility shortcut has been enabled and configured for VoiceOver, your wife can also enable and disable functionality more conveniently:
    • On the Watch: quickly press the digital Crown (the round button) three times.
  • To set up accessibility shortcuts:
    • On the iPhone of your wife, in the application of the watch, go to: Watch My > general > accessibility > accessibility shortcut (bottom) > select / deselect VoiceOver.

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "It is to go

  AfterEffects CS6 will not show on my Adobe Creative cloud. I work in a school district. The error message is: ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer service. "This has happened during about two weeks, give or take. Everything is displayed. Are there patches? Thank you

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Windows Update will not install, I get message 0.800700005.

  Windows Update will not install, I get message 0.800700005.  I'm not available updates when I shut down my computer and cannot access Internet Options in the Tools menu of WE.  Computer works well but no updates or the Option settings. Help

  Hello

  1 update you are trying to install?
  2. don't you make changes on the computer before the show?

  Method 1:
  Run the fix it and check.
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Try the procedure described in the supplied knowledge base article and check.
  Error: 0x80070005 when you try to install updates by using Microsoft Update or Windows Update
  http://support.Microsoft.com/kb/968003

  Method 3:
  You can try the steps and check if you are able to install the update.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798

  Registry warning:
  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows:
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Apple iTunes will not run.

  Apple iTunes will not run.  I reinstalled several times. The error message has something to do with DEP.  But I doubt that iTunes referred to system memory.  In addition, my PC has hardware DEP, no software.

  Thank you.  Found the answer in the Apple community.  I had to reinstall Quicktime in order to get iTunes to run.  They had lost their association.  Everything works now.

• iPad Mini will not show iOS10 update?

  Hi all.

  My iPad mini 1st generation will not show the update option to iOS10 via iTunes or wireless.

  Any suggestions how?

  Your iPad CPU is not powerful enough to run iOS 10.

  (144743)

• Apple Watch: can I receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please. Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... someone kn

  I can receive all messages from whatsapp on my Apple Watch, but not the Group whatsapp messages, don't know why... Help, please.

  Besides, my watch is custom in Spanish, but only answer messages Whatsapp understands English... anyone know why? Thanks to you all!

  Hello

  To change the language for a response on your watch: Press answer > firmly press the screen > press on choose language > select Spanish.

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• Apple TV will not maintain a connection with my Samsung

  Apple TV will not maintain a connection with my Samsung TV UHD.  All other devices work well with it.  I tried switching ports HDMI and cables without change.  Apple TV can turn on and turn off, plug in for 10 seconds, or not at all.  (Note: Apple TV is still in install mode, because it does not appear long enough to complete the process.)

  HELP, PLEASE.

  Which TV model you have?

• When I go to my computer, then program files it will not show me the exe files

  When I go to my computer, then program files, that he will not show me the exe files, that told me what to do not have full administrator control, when I go to the page showing which is the administatrator he show me has a control total why he let me not see the exe files, it also leaves me not so far closed for my dvd writer dishes?

  Try Control Panel, user accounts, click the account, make sure that its listed as 'administrator '.

  close. Then, in control - panel.open 'Options records' stand & check the box 'Show hidden '.

  files & folders", uncheck uncheck them next box"Hide extensions"next"Hide protected. "

  files/folders", nearby... This you gives access, however, once youre thru with youre editing

  or see the files/folders, you must restore default in 'Folder Options '...

• When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave

  problem title: original accessory

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  When a small sign of movie is available as an attachment 'he' will not show picture but sound turns on and that 'it' will not leave.  Help!

  What do you say "he's not leaving"? He kept playing with his only non-stop?
  If it is 'yes' or 'no', you can always he kill 'soft' media player.

  Take a look at your video accessory. What are the last 3 numbers, such as avi, mpeg, mov etc. ?
  It is possible that your video accessory is in a format unsupported by Windows Media Player.
  Save it in a folder of your choice.
  Googe for a FREE video converter (if you do not have one) and convert the video file toWMV.
  Now you should be able to read in the drive media with images and sounds.

  t-4-2

• Create a model that can be replicated, but will not show changes in the original model, which occurs in any comps duplicated from it?

  I imported a doc I - 4 layers. Then I dragged these 4 layers in a new comp - comp1. I would like to reproduce this model so that I can try different things using these same 4 layers. But when I duplicate the comp I did - comp 2 - any change I make appear in comp1. How can I create a model that can be duplicated - but will not show changes in the original model, which occurs in any comps duplicated from it? Thank you very much!

  (CS5.5)

  It is a common misunderstanding when you start working in Ae. It takes time to get used to, and even veterans are still this error from time to time. Here's the thing, you have to get in your head: your project Panel is where your source material is, and the timeline is the place where there is a representation of this source. This means that if you duplicate an item in your timeline (particularly relevant for the precomps) it will duplicate a copy, not the source. so, if change you it - it will change all instances of this copy. If you want to duplicate a precomp and create another source, you will need to do it in a 4 step operation:

  1. duplicate your precomp in the timeline (you got that day)
  2. Select the source of this copy in the project Panel (currently the same precomp)-right click on the-> precomp 'reveal the source layer project.
  3. duplicate the precomp selected in the project Panel
  4. replace the copy in your panel mounting with the duplicate of the Source Panel (shortcut - Ctrl + alt + / when both are selected, or drag it to double with pressing Alt)

  what you are really duplicate the precomp twice - once in the project window and once in the timeline, and then one link to the other.

• How can I change the workspace to a color for my computer screen will not show

  How can I change the workspace to a color for my computer screen will not show	Submit question

  	Submit question

  Photoshop CS6 now opens by default with the "Application Framework" lighted. You can go window > frame application in the main menu and uncheck this

  We have a lot of useful information in the FAQ section. The answer to this question was also there. See the link:

  FAQ: UI - how do I change the color theme, text size, or cut the course of enforcement?

  Feel free to browse other FAQS, there might be a few other things of interest.

  Guinot