My Apple Watch will not show its display and its new brand

Similar Questions

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Apple pay will not be set up on my new 6 iPhone.  When I touch the icon 'Add card' the ball turns just until the screen times out.

  Hello...

  Force restart your iPhone > press on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

  Then try to add a card again > define and use the Apple pay on your iPhone

  And make sure your bank / card is accepted for use with pay Apple > Apple pay participating banks and store card

• My stupid Apple Watch will not recognize a valid appleID and a password.

  How to lose a Christmas. Give him an Apple Watch.

  Hello

  My Apple Watch works fine shows the value back to settings factory & start over.

  Go to ibooks

  On iPhone / iPad download the Apple Watch user's guide is free.

  If you have tried to do this all day just relax & tomorrow sorting.

  I didn't know if became a watch until this morning.

  Just try it, go into itunes on iPhone / iPad to apple ID

  Sign out and then sign back in.

  See you soon

  Brian

  PS I would like to know how you go.

• Apple Watch will not pair manually or automatically

  Watch became disconnected from the phone.  Followed all the instructions to disable the twinning / re-pair.  Automatic pairing fails repeatedly.  Manual matching fails as well - the watch never displays a 6-digit code.  Has anyone seen this before / resolved for it?  Thank you.

  Hello

  For later use, it is not necessary to clear the pairing and re-pair Apple Watch when it is disconnected. If your watch becomes disconnected via Bluetooth and unable to connect to a Wi - Fi network, known at the time, it will display the icon disconnected on the dial of the Watch:

  

  Bluetooth disconnects occur every time that the pair iPhone is not available (as in the iOS updates or when your iPhone is out of scope). The watch and the iPhone must reconnect automatically a short while after having reconciled being brought back.

  If they do not automatically reconnect instead of disconnecting your watch, rather trying to keep your iPhone and Apple Watch close to each other and follow these steps until they reconnect:

  • Check that Bluetooth and Wi - Fi are activated on your iPhone:
    • It can help to turn Bluetooth on or off and turn it back on your iPhone (settings > Bluetooth).
  • Check that airplane Mode is not enabled on your watch:
    • When you display the time on your watch, drag upward on the dial of the watch > drag left / right to the glance of parameters.
      • If the glance of parameters says already connected and the symbol in the upper right corner is a green phone, your watch is already connected to your iPhone via Bluetooth.
    • If your watch is not connected and the airplane Mode is on, press the button to turn it off.
    • Otherwise, it can help to activate / turn off the airplane Mode again.
  • Restart both devices, both turn off together, and then restart your iPhone first.

  For optimal performance of your watch, keep both Bluetooth and Wi - Fi enabled at all times on your iPhone.

• Apple Watch will not unlock MacBook

  I have a Macbook 2016 on MacOS, iPhone 6 more current iOS10 of execution, first-generation Apple Watch running Watch OS3 and two steps on authentication.  As shown in the screenshot below, I was able to check the possibility of allowing my Apple Watch unlock my Mac.  He looked the watch and then checked.  I did this several times, however, it will not unlock the Mac.  New features to copy and paste between devices, etc seem to work well, but I can't get the unlocking function to work.

  

  Hello wow321,

  Thanks for asking for help with unlocking you Macbook with your Apple Watch here in Apple Support communities. We commend you for updates latest and your devices. Also, please check the things you already checked. I will do my best help to offer things to get this working as expected.

  I have personally reviewed article for help to unlock your Mac with your Apple Watch which is here: automatically unlock your Mac with your Apple Watch. The first thing we want to do is to check that everything is correctly configured through this step by step article once more.

  A confusing area for some people is the type of security on their Apple ID. The State of necessity who need a Apple ID to use instead of the two-step verification two factor authentication. Please check the type of security on your Apple ID using this help article that deals with two factor authentication: authentication two factor for Apple IDand this second article of help dealing with two-step verification: frequently asked questions about two steps checking of Apple ID.

  If any snippet and you still have questions, I recommend you make a backup of all your data on your iPhone to make sure that everything is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Then, try to turn the iPhone, with the Apple Watch is paired both devices Mac, power off and on. Sometimes, that's all that is needed for connections reset and everything working properly again.

  If you're still having problems, please cancel the twinning of your Apple Watch from your iPhone by following the steps described here: pairing your Apple Watch and iPhone. Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected. After the reset of the iPhone, pair your Apple Watch with your iPhone again and check if the Apple Watch can then unlock your Mac.

  Thanks again for asking for help with this here in Apple Support communities. Have a great rest of your day.

• Apple Watch will not update to watch OS 3

  Hello

  I wonder if anyone can help me? I updated my phone to iOS 10.0.1 and when I try to update my watch, I just get the message watch OS 2.2.2 your software is up-to-date.

  I have no profile installed on my phone (for example Apple Beta etc.) and I restarted the two devices.

  Does anyone have any suggestions?

  Thank you

  Allan

  Hi Allan

  It can help to disable the twinning and re - pair your watch.

  The app shows on your iPhone takes a backup of your watch when unpairing via the app choose to backup restore when the possibility to put courses in place. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  Cancel the twinning of your iPhone - Apple and Apple Watch Support

  Set up your Apple Watch - Apple Support

• Apple Watch will not pair to iPhone

  When I try to implement my Apple Watch, my iPhone 6 tells me it's expired. I have the latest version on my phone that is iOS 9.3.5. I choose English and that my area is in the United States, but I can't go any further in the watch. I have reset the watch as the phone. Bluetooth is on. Both devices are charged. I even tried manually matching devices, but all I get is the same error message.

  Is this a new watch or you configure it again?  If used before you remove the existing settings Bluetooth pairing?

• ID4 control bar will not show the character and paragraph settings

  Just changed in the old Indesign and ID2 ID4 I always had character style at the top of the window control bar - police, font size and so on.

  I can't it appears in the control in ID4 bar.

  Here is a screenshot of the screen 'customize the control panel': (elements of the object are checked too, but the window is not large enough to show them)

  

  and this is what makes me, only object items:

  

  even when I switch to the view of the so-called 'typography', there is no typography in the command bar:

  

  What Miss me?

  The control panel is context-sensitive. You must have the text tool is active.

  Typography is one of the standard workspaces comes with CS4. Panel control workspaces and menu commands available, but would not, as I know, affect what shows or does not appear in the Control Panel, but then I never really bothered with workspaces stocks since I was my own that I prefer.

• Apple Mail will not show my mail messages

  All of a sudden my iMac (27 inch, end 2012) Sierra running (OSX 10.12) does not display my IMAP messages in Mail.app.  Inbox window (for example) says "Inbox (0 messages filtered)", and other mailboxes are similar.  I guess the problem is the word 'filtered', but I didn't ask to filter anything.  If I search something in common, like '@', it shows all messages.

  I upgraded to Sierra for a few days, it didn't happen immediately.  This does not happen on my MacBook Air or my office iMac, two Sierra also running.

  I tried to rebuild the mailboxes, and also remove account IMAP and then add it back.  Seems to have helped.

  Any help would be appreciated.  Thank you.

  Problem solved.  In another thread, I noticed that there is an element in the view menu "toggle the filter messages '.  I don't know how it happened 'active', or what filter it is talk, but disable Solver problem.

• Two monitors will not show extended display

  I just bought a HP Envy 7000 with two dell monitors. In addition, I bought a DVI - D splitter and two monitor DVI - D cables to connect the monitors. The two monitors work, but he won't show a mirrored display.  It is the splitter I bought for connections. http://www.Amazon.com/STARTech-com-DVISPL1DD-1-feet-digital-splitter/DP/B00111EMMO/ref=sr_1_1?ie=UTF...

  Any help solving this issue is appreciated.

  Hello

  Install Windows 8.1 8.1 Intel video driverthat is displayed for your PC.

  Review of this article on the use of two monitors HP.

  You should also check in the Intel Graphics Contol Panelfor adjustment of the extension.

• CC of Lightroom book Module will not show the cover and the back cover when I try to create a book.

  Hello

  I recently installed the latest update of Lightroom CC on 09/12/15. I imported a bunch of pictures of customer so that I can make an album. I made this countless times before, but this time, when I've imported the photos and entered the book module it exceeds all the photos but do not give me a model for a front and back cover. Is it hidden? I searched everywhere on lightroom to try to fix it, but can't see what I can change. I even stop and restart Lightroom, but the same thing happens. No rear and front cover. What can I do? Help, please.

  Hi kathleenp75670290,

  Could if it you please let me know the exact version of Lightrooom, click Help > about Lightroom.

  And also what operating system are you working?

  Also could you please attach a screenshot of the book without pictures in Module?

  Kind regards

  Tanuj

• My Apple TV is only to play a sound on my iPad but will not show the film?

  My Apple TV is only to play a sound on my iPad but will not show the film?

  Welcome to the Jennifer Apple community.

  Some content providers don't block the video portion working with AirPlay, have you checked to see if AirPlay is supported by this provider.

  If it is supported

  these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > General > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your mobile device.

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• Apple Watch does not work

  So do not know how this will go down, but I think of my Apple Watch was the biggest waste of money so far, very disappointed.

  1. it just doesn't work very well, everything works slowly and measures are very imprecise.

  2. the quality is not great, that I am not wearing it will train in as possible just broke

  3. the battery is shocking that I'm sick of charging

  4. went the last updated and it has now crashed and locked up, keep trying to restart, but it keeps failing

  5. perhaps one should leave apple the money and they can keep the watch its terribly bad.

  6 apple thanks to the release of the new version of the watch so little time, if happy I bought the demo version I have waste. Maybe I should of applied for a job your PSU on the watch and you pay you for the privilege a cup of what I've been they saw me coming.

  7. can I someone please difficulty this watch, replace it before that I throw it in the trash.

  So disappointed in apple and this product just re apply my decision to consider away them from the brand.

  If it is a recent purchase and you are unhappy with it, you have 14 days to return it. You also have a 1 year warranty and can wear the device at the Genius Bar and get help with the device. That, or you can try the Troubleshooting device, but given your attitude in your rant and you only ask if anyone can fix it, I don't know that you would like help from other users. It's not Apple you talk to, this is a user to user support forum.

  We have 3 Apple watches in our family, a Sport and 2 watches from Apple, and all three work extremely well and achieve or exceed our expectations.

• The Milanese loop can be worn all by playing of the drum and operation etc. of hiking? (I'm a drummer) and I can wear Apple Watch in the shower?

  I'm in a band and make a lot of drums and hike as well. A lot of things on the outside where I might have to move my arm quickly or a lot. Always do

  the Milanese loop what the band for me? (I'm a guy is told by the way) and secondly I can wear Apple Watch in the shower? answers will help me to decide what the band to get when I buy a Apple Watch 42mm soon

  See this document: water on Apple Watch - Apple Support resistance

  https://support.Apple.com/en-us/HT205000

  No shower while wearing the Watch:

  Your Apple Watch is splash and water resistant, but not waterproof.

  ....

  and

  The following can affect your Apple Watch water resistance and should be avoided:

  • Do drop your Apple Watch or submit to other impacts.
  • Submerge your Apple Watch in water for long periods of time.
  • Swim or bathe with your Apple Watch.
  • Expose your Apple Watch pressurized water or water of high velocity, for example, take a shower, water skiing, wake boarding, surfing, jet skiing and so on.
  • Wear your Apple Watch in a sauna or Hammam room.

  I'm not sure of the loop of the Milanese to your needs.  It is easily adjustable and fits perfectly, but it's magnetic and I'm not sure if that may interfere with your equipment.

  My watch has the sports Strip and that is comfortable also.