Apple Remote Desktop tries to connect to some weird areas

Similar Questions

• HELP "ARD" (Apple Remote Desktop)

  If you use apple remote desktop, you will have to enter the username and password for the computer you are trying to connect to? And can connect to windows computers?

  I'm getting a mac soon and I wanted to know this answer.

  You very probably will not use Apple Remote Desktop and screen sharing.   Cost of Apple Remote Desktop ~ 80 $US on the App Store.   Customer screen sharing and the server are all part of Mac OS X.

  Apple Remote Desktop works with OS X devices.   As does screen sharing.

  Screen sharing requires to authenticate in the target system.

  If you want to access on Microsoft Windows screen sharing systems, acquire a copy of the cord or other similar packaging.

• Why is my Apple remote desktop not send software upgrades as it should?

  Apple Remote Desktop Help?

  In apple remote desktop there is command-line unix where I can send the command softwareupdate - install - all, and I do as user root on an administrator account. My problem arises when I send the software update and ARD never Specifies if yes or no updates have been installed successfully, it just says: Update software tool. I know that it is not to install the update either, because when I look at computers I see pending updates. I'm new to the apple support and appreciate any help in this matter. Thank you

  have you tried:

  Send the command as root

  the "softwareupdate d-i - a" command?

  Try issuing the command to one computer at a time. If you issue it to 100 computers. Your network can choke on the bandwidth required to download all the updates to those. Keep in mind that softwareupdate is for upgrades of the OS; It will not install the updates of pages or other app store apps.

  If the command works, you'll probably want to restart the computer. If everything is working properly.

• Apple Remote Desktop (3.8.5) on several network interfaces

  Location:

  Running Office at distance between an iMac and a Mac mini, both running up-to-date El Capitan.  ARD version 3.8.5

  Both computers are on two networks, the WiFi network including the internet connection and is therefore "primary" and a wired machine-to-machine ethernet connection.  WiFi and ethernet are on separate subnets.

  In Didier, ARD 3.8.4, the Remote Desktop on the Mini app would announce (on Hello) as 'Active' wireless and wired interfaces, and from the iMac, I could choose who I want to use.  Usually the cables, connection gigabit ethernet to reduce network activity on WiFi.

  After these two machines 10.11.2 and ARD 3.8.5, update the Mini looks like 'Active' on the WiFi connection and 'offline' on the connection wired and is the remote desktop will not connect via the wire link. (no change with 10.11.3)

  I tried all combinations of options, I could think of to try to force the 3.8.5 on the Mini ARD announced as 'Active' on the wired connection.  Until beginning with no network connection, at all, on each machine, with all remote management and sharing turned off, re-boot both systems and leaving the disabled WiFi connection.  All to nothing does not.

  Paradoxically, file sharing works great!  It's just the Remote Desktop/screen sharing (Yes, I tried also, all possible combinations) will not announce or connect to the wired connection.

  When the two networks are active, sharing on the Mini preferences show the IP address for the primary network (WiFi) as well as the name (Nimitz.local) of the computer.  However, if the WiFi connection is not active there is no IP address displayed and the ".local" does not appear in the name of the computer.  It appears as just "Nimitz" not "Nimitz.local".

  I went through all the / library, folder ~ / Library, looking for whatever it is possibly connected to this issue.  I opened the files, checked the files, replaced the files and deleted the files without result.

  So my question is: how to do Remote Desktop or screen sharing to connect to the wired interface?  I'd rather not try and go back to Yosemite and ARD 3.8.4 if possible.

  Thank you for your patience!

  Kyle

  App for screen sharing, it must use the wired connection if you Set 1) Ethernet on your system of Viewer to be the first interface in system preferences-> network-> gear-> Service order icon set... and 2) to connect to the target by its IP Ethernet address. Remote Desktop is the MAC address of each computer and combines the addresses into a single entity. Most likely, the second computer that shows 'offline' is a file incomplete or dead. I would like to delete it. ARD promotes the address who has worked both previous. In theory, you can turn off WiFi and connect once via Ethernet and it will remain.

• How to purge incorrect DNS names in Apple Remote Desktop Version 3.8 (A 380, 95)

  Environment: Community College, Microsoft DHCP 2012/DDNS network

  Question:

  I've got ~ 140 iMacs with 13% to appear in my Apple Remote Desktop (ARD) scans as having correspondence name vs DNS name of the network.

  I suspect this affects refusal to license for our products Adobe CC. How can I clear the fields name DNS ARD again be filled properly?

  Hi gwanupnorth,

  After checking with file-> Refresh in ARD Admin and there are still agents machine correct without DNS:

  -Check in the list of the scanners of ARD Admin, if the machines of 18 or more are detected it with the correct DNS name.

  -If Yes, click on each one and update the username: password: and it should update the corresponding entry in all computers.

  HTH,

  Cheers, dwbrecovery

• How to make Flash Player Package to use the Apple Remote Desktop.

  I want to deploy Flsh Player Package using Apple Remote Desktop.

  Could you please please teach me how to make Flash Player 'Package' to deploy Apple Remote Desktop on Mac OS X 10.9.

  Hello

  We provide an installation of Flash Player PKG for managed deployment package.  The package is available for download for visitors (with distribution license) current of the Adobe Flash Player Distribution | Adobe page.  The post you are looking for is the option 'download DMG Installer (for system administrators).

  --

  Maria

• Cannot start more Apple Remote Desktop

  Hi all

  All of a sudden I can't launch ARD 3.8 (A 380, 95) in El Capitan 11.11.4 more.

  Whenever I try to launch it on one of my Mac, I get a warning telling me that he was able to start "because of an unexpected error" (The Remote Desktop software is not installed properly, or the computer may require a restart).

  

  It affects all user accounts (so it's not a corrupt user pref) and reinstall the entire system through the complete installer does not help.

  I can use the screen sharing app good...

  After reading an old thread to similar problem (software Remote desktop administrator could not start) I tried to delete all the preferences and support for files following the instructions on the Apple KB page , but it did not help.

  I also checked the Console, and it reports:

  22/03/16 10:02:46.888 AM Remote Desktop [5905]: OpenConnectionToAgent - cannot connect 2

  22/03/16 10:16:36.035 AM ARDAgent [6057]: libcoreservices: _dirhelper: 400: mkdir: path = / var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/modes [2] = 0700: permission denied

  22/03/16 10:16:36.035 AM ARDAgent [6057]: confstr(3) on _CS_DARWIN_USER_CACHE_DIR returned an error.

  That could indicate a problem with sandboxing, but still, I see WARNING similar to this one with different applications on different computers without consequences (I suspect the sandboxing allows logging quite talkative today). I checked the cache folder, he was referring to and did not notice anything on the spot or missing (comparing to another computer where work ARD).

  If anyone has a suggestion... I would be eternally grateful

  Corentin

  Of note... I had to replace the drive on the Mac recently and I wonder if it could be a kind of incompatibility of recording equipment. Not sure where that would be stored well and correct uninstallation of the application, following the instructions in the kb should have taken care of that.

  Corentin

• Home network works great, remote desktop will not connect.

  I have a Windows 7 laptop and a Vista laptop. They are connected to a secure wireless network. Both work very well as standalones. When I try to connect via Remote Desktop or connect with each other. My 7 is in a homegroup with a single name. My Vista is in a WORKING group with the same name. I can't connect either using remote desktop. Computer for both names are names of a single word, 'XXXXXX', not the format xxx.xxxxx.xxxx and I can't figure another way to their name. I spent 2 days serching various tech forums and tried what they suggested.

  Hello

  Homegroup is a unique feature of Win 7. It uses IPv6.

  As you connect to Vista you must configure Windows 7 to the home network.

  ------------------------------------

  Network Win 7 with another version of Windows as a work network (works very well if all computers are Win 7 also).

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  ------------------
  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Remote Desktop having problems connecting Surface RT to Win 8 portable Pro (new installation)

  Remote Desktop/RemoteApp problems

  I was not able to connect outside of the network.

  I sprung several days trying to solve this problem by myself, then on the phone with Microsoft productivity, and some of them aren't yet familiar with Surface RT. So with the RD in network connection is quite simple and effective, I hope some people here can confirm that they have the same problems or possible solutions.

  As I see it, there are 3 interfaces where we can connect to RD on the Surface RT: Pre-installe Remote Desktop Office found via scanning and research, the metro downloadable RemoteApp and desktop remotely via the control panel).

  I see where ping command is executed on the computer and port 3389 is open and oriented to the laptop, so I will state the problems I see with each when I try to log on a Windows 8:

  (1) pre-installed RD:
  

  It's great and the name of your computer is there for you and connected to your account and network ready. You have options like "Connect and don't warn me if server authentication fails" I think has helped many people on Windows Server with certificate problems.

  Off-grid on Surface RT, however, you get «Remote desktop cannot find the computer _.» This may mean that '_' does not belong to the specified network. Check the computer name and the domain you are trying to connect to."

  (2) metro UI:

  
  

  It seems to do a ping the computer more quickly when you put: 3389 at the end of your IP address. However, no success after having tried with and without the end of the port. The messages I get are...

  RemoteApp 3):

  

  This is the solution I've seen in most tutorials,... but the reason given for not connecting, it is "the remote computer cannot be authenticated due to problems with its security certificate."

  Instead of the option to bypass (which option 1 gives you), there is no other choice, and he says "Windows is unable to continue setting up this connection. Contact the administrator of your workplace. »

  This message made me to learn more about the certificates that I always wanted to know. I tried to start MMC and ensuring that the cert listed in Remote Desktop has been copied to the folders of the confidence of the authorities certificate root (duplex as certificates on the local computer). I tried different combinations and did not really anywhere.

  If someone connects via #3, please post care on your certificate if you can find it.

  Any help on getting one of these methods to work is appreciated. It puts naked repeat that port 3389 is listed as open on my home network, the traffic is transferred to the correct PC and all firewalls are disabled until I can solve this problem.

  Hello

  Sorry for the delay in responding.

  Assistance in connection with Remote Desktop problems are handled by technicians of the TechNet Forums.

  If you are also facing problems with remote desktop on the computer Windows 7, then please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Keeps remote desktop abandon the connection

  Hello

  I have just upgraded to Windows 7 Windows 8. The main question that I have now with Windows 8, it is the remote desktop client is somehow broken for me. Whenever I use it, it blocks (i.e. I can't interact with the remote computer) and then I get the box of Pseudo-dialogue indicating reconnection it will reconnect and I return the remote access. He does it all the time (about every few minutes). Note that when I can't interact with the computer to remove it, I can still ping it very well. Clearly, it is not a connection problem.
  It seems to be a problem with Microsoft Remote Desktop Client because I'm so tired, I tried 2 alternatives: terminals and mRemoteNG. Their use, never removes the connection.
  However, I would like to use the Microsoft client as it is more convenient to use. I tried to copy some binary files from Windows XP or Windows 7, but they do not work properly when I try to run them, I guess it's more than a simple 'mstsc.exe' to copy (I copied c:\windows\system32\mstscax.dll thus, but it kept loading of Windows 8).
  Anyone with a similar problem?
  Thank you
  Manu

  A fix came out 11/13 which appears to solve the problem for me. The number is 2897602.

  http://support.Microsoft.com/kb/2897602

• Remote Desktop does not connect Win 7 on Win XP pro.

  The two turned on, remote active and available on the same network. I tried to connect by the name and Ip address, but I still get the error message. Remote Desktop cannot connect to one of these reasons: 1 remote control, access to the server is not activated 2 remote computer is disabled 3 remote computer is not available on the network.   I have connected before. In fact, I went to my computer in a click with the right button on the computer in the access network, it could not connect. He gave me the opportunity to diagnose the problem, so I chose it. The result of the diagnosis was the computer appears to be correctly configured but (computer) does not. I recently, during the last week, the object a new copy of windows xp pro on the computer and I have connected with access to distance since.  Why can't connect now?

  Check your firewall and router, the remote desktop protocol uses port 3389, this port must be opened.

  John

• Remote Desktop is not connecting

  I am trying to connect to a computer on my home network running W7 Professional using DRC. It is the only station that does not accept the connection. All are part of a domain. Is there a domain server. Symantic End Point Protection a firewall (firewall W7 is therefore off). My connection to the DRC is triggered by a W7 Ultimate station within the domain and specifies a port [STATION02:3390]. The router sends port 3390 to this post, and I get a good test of the router for this port. DRC is switched on to STATION02. I tried with and without network authentication. I tried to disable Ms. My domain name is called at the HOUSE and I entered my user name as an authorized user of the DRC on the host: HOME\richard and HOME\Domain users. All other computers on the network can RDC to each other, except STATION02 does not login as a host. I am stumpted and would appreciate help. Is there an area of setting I'm missing? Thank you.

  Hello

  Your Windows is better suited for the IT Pro TechNet public. Please post your question in the Remote Desktop Services forum.

  You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• error on the remote desktop and VPN connections

  Unable to connect using desktop remote or VPN. remotes can't find the computer at home on the network and the VPN gives me an 800 error code. I used the remote desktop, but it says my work computer isn't on this network and the VPN connection fails. We checked everything using remote assistance, but it becomes too hard and not responses. Help!!!!!!!!!!!!!!!!!!!

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public.
  Please post your question in the TechNet Windows XP category.
  Here is the link:
  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
   
  I hope this helps.
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Remote Desktop Session Authentication connects to Active Directory

  Hello

  I would like to know when a Remote Desktop session is happening between two workstations in an AD domain, is an event recorded in the ad servers and if so, what is the category and event code.

  Thank you very much

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• WiFi works, but Apple Store crashes trying to connect!

  I just got a new Macbook Pro when I try to connect to my application and/or iTunes account it just hangs. I got a good strong signal to my wifi. I still can't browse the internet through safari very well. I can still access my account through Apple.com very well. What seems the problem?

  I just got a new Macbook Pro and I'm having the same problem - anyone have any ideas?