WiFi works, but Apple Store crashes trying to connect!

Similar Questions

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• My MacBook is not connect to my Time Capsule to back up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.  Help

  My MacBook Pro is not connect to my Time Capsule so it backs up.  IMac my wife backup fine and our wifi works, but when I try to save, I get a message telling me to connect to the T. C. when it is available, which is never.

  The problem started when I upgraded to Yosemite, sometimes back.  I am running 10.10.5.

  The MacBook Pro...

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click Add or remove from your drive

  Under the heading of backup disks, click on the drive it to highlight (probably named 'Data', unless you have changed the name of the drive)

  Click remove disk

  Close the windows

  Restart the MacBook Pro

  Click the 'clock' Time machine at the top of the screen of the Mac

  Click Open Time Machine Preferences

  Click select drive or Add or remove disks

  Choose the Time Capsule drive (probably named 'Data') by highlighting

  Click use the disk

  Close the windows

  Wait a while to see if a backup is performed

  If you want to manually run the backup, click on the Time Machine clock icon, and then click Backup now

  Report on your results. If the backup still does not work, we need the exact message that you see there.

• I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

  original title: connection to a network PC 2

  I use Windows XP, when I try to install 2 network connection on a PC, AAQMS has stopped working, but if I disable the secand connection quite well.

  1 connected directly to the AAQMS system for the Air monitoring

  2. connect directly to the LAN of the company

  There is a solution that I can't connect two without any AAQMS system shutdown.

  Hello

  Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro

• Apple Remote Desktop tries to connect to some weird areas

  Firefox and osx elcapitan 10.11.4 15E65

  It's so weird that lately my ARD tried to connect to areas randomly I searched on the web. Little Snitch reports she's trying to connect to 'gist.github' and the other day he tried to goto "krampus".  As I said it's strange behavior since it's the kind of thing I entered in google.

  All advice is appreciated.

  I would be a little surprised if Apple Remote Desktop (ARD) have been connecting the specified web sites, you can post what Little Snitch reports as the source and the destination of the connection?  Also please post what version of Apple Remote Desktop (ARD) are you using?   3.8 (A 380, 95) is in course, at last I checked.

  My general recommendation is to remove Little Snitch - this is a great tool, but it also tends to cause problems when network connections are blocked by mistake, and it's certainly excellent fodder for causing paranoia.

  Adware and malware can cause this, but - if you connect to these sites and don't have adware or malware or any sort of anti-virus or anti-malware, or other similar types of tools tools additional loading - I guess it's OS X hides a tile or such.

  Here is a previous related discussion - even if it is not of the ARD.

• WiFi works but Ethernet does not work

  I just changed the ISP. I use the modem cable of the MRC, which is the same as one that uses Xfinity. I'm also using a Linkysys EA4500 router. I have not had any problems with setting up yesterday before they changed over this morning.

  I have two iMacs (my wife and I). If the modem cable is directly connect to one of the two iMacs, the internet works fine. However, when the Linksys router is part of the configuration, the iMac to my wife can connect via the Ethernet port but my iMac won't. My iMac can connect via WiFi. However, he won't be able to connect if I use an Ethernet cable.

  I have already reset the router to factory setting and restart the iMac and clear the PRAM, switched Ethernet cables. What happens here?

  The problem you describe will occur when changing the device connected to a modem cable without having to reboot the cable modem. Cable modems that are not as routers will communicate with a single device and refuse to connect to what anyone else, until you cycle power.

  Turn off your modem cable NCR and leave that it turned off. For reasons I don't understand (and will may not be not necessary), some cable ISPS also recommends disconnect physically their coaxial cable modem to perform a reset "full." During this time you can turn off the Linksys router also. Connect the iMacs to the router, either its LAN ports, via an Ethernet switch directly. It is not necessary to turn off Macs.

  Wait a few seconds, then reconnect the cable to the modem if you disconnected and turn on both the modem and the router. It should work.

• Windows 10 wifi, works, but can not see my wifi at home

  I have a mac mini in 2012, I installed windows with bootcamp 10, windows different wifi networks are available, the only problem is my own wifi at home never appears.

  -my mini mac detects and connects to my wifi at home very well when running OS X

  -my windows laptop 10 detects and connects to my wifi at home fine

  -various phones/tablets etc connect well

  I tried many things

  -restart the router

  -movement of the router

  -in the Device Manager on windows 10 in bootcamp, everything looks like it is good, there is no exclamation point anywhere, I tried to uninstall and reinstall the wireless drivers, but it makes no difference (wifi networks are available, but not my home wifi)

  I can't really think of anything else to try.

  Someone at - it ideas?

  After some time googling, I fixed this problem by using a web browser to go into the settings of the router and changing the channel wireless from 13 to 10.  my wifi at home and then immediately displayed.

• DN1030. Wired WiFi works but not wireless, even after moving the unit next to the modem

  I have great wifi range and cable modem speed.

  My wife saw a video from You Tube Streaming PARTY so I bought a DN1030 to replace an old music receiver and a Blu - Ray BDP - BX510 a player couple so she can listen to the same music through the TV speakers.

  The readers Blu - Ray picked up wireless in 1 minute.

  The DN1030 think for a few minutes and tells me that the connection fails.

  I have temporarily moved the DN1030 next to my modem (it was only 15 feet away) and there was no change.

  I even reset the receiver and tried to update his software (it does not need).

  I temporarily connected it with a Ethernet cable and it works.    Tested with airtime and the PART.    Great flexibility.

  I can't move the modem or connect a cable to the DN1030, so I really need a wireless receiver.  What do you recommend?

  A different model?

  It is highly recommended that you plug your STRDN1030 has / V Receiver to a router or a modem/router and not just a standalone modem because stand-alone modems assign IP addresses to internet equipment as your Sony receiver.

  You can contact your internet provider to get a separate router or upgrade your modem existing to a modem/router device.

  If my post answered your question, please mark it as "accept as a Solution.

• Browsers (Firefox, IE, Chrome) work, but all the other programs to connect to internet

  A few days ago I noticed that I can't browse the internet more. I tried firefox, IE and chrome, and they all could not load a Web page as if I had no internet access. I tried my adapter wireless and wired LAN to connect with the same results.

  However, AIM, Skype, steam, zune, etc. can all connect to the internet, either wired or wireless.

  I do remember not all changes of importance specific to my computer. I have to update windows and my nvidia drivers a few days ago, but the internet worked normally thereafter until my current problem as described above.

  I have a windows 7 (64 bit) with avast antivirus, zonealarm firewall. I don't remember the last changes made to one of these programs that cause this block. Previously, everything worked very well. All other computers that connect to the same access point do not have this problem.

  Any help would be appreciated! Thank you.

  I'm always sure of fairy.  It could be a different configuration, but more than likely it is that your machine is not configured for web access via VPN.  I'd be willing to bet that your VPN administrator must add your IP address (or, more likely, your address NIC M.A.C.) to list authorized on the network.

• N5110 display not working, but when the external monitor is connected to come

  My screen does not work and I often hear 8 beeps at startup which indicate a problem with lcd display. But if I connect an external monitor, the LCD lights up also and then I can disconnect the external follow and work with my built-in screen. If I turned off or in hibernation etc the same problem occurs.

  Hi rndb_v,

  LCD screen could be about to fail, or it could be a cable problem. I suggest you try reseating the LCD cable. You can find the manuals here http://dell.to/1n5lDxb

• BlackBerry Smartphones everything works but "...". Check connected... "stop using it

  Hi thanks for looking over.

  Install cd playbook on laptop.  All right.  Both were in communication with one another during the installation.

  Also small window says it's in the z on laptop.

  When BB Office program starts on all the laptop is fine until a text window saying small print...

  "Before starting, check that your current playbook is connected to your computer"

  Yes it's on. PlayBook says that it is connected.

  Reboot and message on laptop will show that this playbook has been disconnected.  And connected to the reboot.

  When the message "before you begin... "just until it greys on the BB desktop program so it cannot be used.

  How can I tell the text box - Yes, everything is verified connected so it will work?  No box or whatever it is.

  Thank you.  Yes did a reinstall - fix erros and same thing.  Rebooted the laptop and playbook (several times) and same message.

  Thank you

  Jim

  FIRE IS RELEASED-

  Yes works fine now.  What was wrong?

  Went to the website and download the update for the Desktop Playbook here software

  http://us.BlackBerry.com/apps-software/desktop/desktop_pc.jsp?lid=us:BBsoftwareesktopSoftwareC & CAL = u...

  Installed and bingo - success!

• WiFi on but green light on the airport is not

  I and Airport Extreme. WiFi works, but the green light is not lite. If I unplug or click the reset button, it flashes orange, and then darkens. I ran a diagnosis and everything he says is done, which is to use a unique name, use WPA2, connects automatically, etc.  Why the green light does not illuminate? Is it important because the WiFi is on?

  The Green LED has probably failed. As long as everything works OK, you can ignore the 'question '.

  However, if the airport is 4-5 years, it would be time to start thinking about a replacement... given that the average life of the airport lasts about 4-5 years.

• Ping works but the browser unable to access internet etc.

  XP on an EeePC the Internet book.
  I can't ping network addresses, but I am unable to use IE or Firefox to access pages on the internet. I use Avast Antivirus; It will be impossible to update. I suspect that windows update no longer works, but I have not tried.

  I ran msert.exe and windows-kb890830 - v4.0.exe in safe mode, no virus no indicated, but when I run them in normal mode both suspend the computer while checking wmplayer.exe.

  Any suggestions?

  Hello

  If I undestand you well, you can run this command ping: ping www.yahoo.com, no problem, but when you're using any browser, you cannot access the web page www.yahoo.com, can you?

  First you can try - full reset TCP and Winsock by this command line command - click on Start - run and write CMD , click OK. Then write this command:

  netsh winsock reset

  netsh int ip reset log.txt

  LC

• Why is - 17.151.38.201 trying to connect to my mail server?

  I use 5.1.5 server in my OS X server, and I have the Mail service is enabled. In my logs, I see several messages like:

  POP3-connection: Info: disconnected (no authentication in 0 seconds attempts): user = <>, = 17.151.38.201 rip, lip = xx.xx.xx.xx

  or

  IMAP-connection: Info: disconnected (disconnected to auth was ready, whereas dry 0): user = <>, = 17.151.38.201 rip, lip = xx.xx.xx.xx

  where xx.xx.xx.xx is the IP address of my mail server.

  Why that IP (which is an Apple IP address) trying to connect to my server using IMAP or POP3?

  As you the indicated this address and in fact the entire block 17.x.x.x is all owned by Apple of the IP addresses. Other than Apple's Push Notification traffic which is not the most common cause of traffic incoming , i.e. traffic from Apple and go to your network is the "Accessibility" of Apple test traffic.

  I would say that in this case it seems that it is indeed Apple do a test of the "accessibility" for your server.

  See http://mac.lytics.eu/?p=160

• Recently, I went to the Apple Store in Easton, because I broke my screen. After that I got my fixed screen it worked for a little while but now it does not meet my contact

  Recently, I went to the Apple Store in Easton, because I broke my screen. After I got my fixed screen, it worked for a little while but now it does not meet my contact, Apple is responsible for this and how do I get my screen works again?

  Take it back to the Apple Store. Repairs made by Apple retail stores are still covered by the warranty.