Apple TV (3rd generation) remote control suddenly stopped working

Similar Questions

• 4th gen Siri remote control has stopped working

  I had my 4th Gen Apple TV since November 2015. Last week noted that the TV shows and movies are glitching but if I do a reboot on the apple TV everything works fine again and have to do it every day.

  Today the Apple TV remote was working fine all day then when a finished film went to for use and there was flashing reaction flights when I pressed one of the buttons. At first, thinking it was maybe needing a charge on the charger. A few hours later I returned to use the remote and it still doesn't work do not at all. I went into the Apple TV menu using a remote old money I thought that I would check how much fresh had the remote and I went for the remote controls and devices > BlueTooth remote control is more is listed and the dial connection was but would not connect to the remote control?

  I tried to reboot that fixed the glitching to see if maybe he would take the remote, but still nothing. Does anyone else have this problem?

  Try to re-twinning of Siri remote:http://help.apple.com/appletv/#/atvbc9953e63

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• Can I use Siri new Apple remote with my Apple TV 3rd generation?

  Can I use Siri new Apple remote with my Apple TV 3rd generation?

  No. not compatible.

• Remote control does not work, and the load does not appear on Apple TV

  Hello

  I just returned from vacation and my remote seems has stopped working.   Naturally, my first assumption was that the charge was simply exhausted.

  Apparently that was the case.   He seems to have just died.

  I did pay for more than two hours and it still does not appear under devices Apple TV.

  My Apple TV 4 works very well because I use the remote control of my phone to navigate through it.

  If I understand correctly what I look at you, it seems that the remote control is same not synchronized or recognized by Apple TV more.

  Any suggestions on how to fix this?

  A reset is complete? Restart... no change.

  Thank you

  Bob

  1. Have you tried pressing the menu and the button for a few seconds while it now an inch or two away from the Apple TV, if successful, you should see a message on the screen saying the remote was paired.
  2. If you have an older remote from a previous model MacBook or Apple TV, you can use to restore the Apple TV, which, in many cases, has been sufficient to reactivate the remote Siri. You must complete all upward to undertake a restoration.
  3. If you have a USB cable - C you can try to restore by connecting it to iTunes on a computer.
  4. If you have tried all of these steps, don't have a distance sooner or a USB - C cable or their use is too inconvenient, return it to the store where purchased for a replacement, or to couple for you.

• Apple tv (3rd generation) - youtube autoplay

  I just bought an apple tv (3rd generation) and I have an iphone 6 s. I bought for the mirroring of the screen and also want to use it for youtube casting, but it does not seem possible. It works with airplay, but it's different.

  That's how I was casting for the samsung tv before with 6 s iphone:

  iphone app - youtube-> cast-> select tv icon

  -Once I have sunk would be on TV, I can choose the videos I want to by adding it to the playlist. After that I'm done with the playlist, TB started playing videos and I can close the youtube on the iphone app and the TV continues to play videos and still has the playlist.

  Problems with tv3 apple airplay:

  -With apple's tv3, when I do the same thing and close the youtube on the iphone app, videos stop playing and atv3 goes back to the home screen.

  -When the iphone screen goes to the lock screen, playing on apple tv3 youtube, the current video, it continues to play until it's over, after that, the playlist will stop.

  How do the following on the airplay of tv3 apple I can do the casting?

  -Read the youtube playlist without having to open the youtube of iphone app once the selection has been selected.

  -Read a random youtube video on iphone with youtube autoplay and they continue to play on apple tv3 youtube even when the screen of the iphone going to the lock screen. Currently, when the iphone goes to the lock screen, apple tv3 youtube AutoPlay stops too.

  Thank you

  You can't have the content of the AirPlay and turn off the phone, why not just use tube you app on the Apple TV.

• You can download applications on apple tv (3rd generation)?

  I would like to download and use the Sling TV app on my Apple TV (3rd generation).  Is this possible?

  Sorry TV, but only 4th generation supports the applications and the TV App Store.

• Apple TV 3rd generation with no App HBO GO.

  I have an Apple TV 3rd generation (model A1469), with software 7.2.1 version (8011) and still don't see HBO GO app. What should I do?

  This application is available only in the United States?

  Thanks in advance!

  I have an ATV3 and HBO Go.  I am in the States.  I assume you have checked the main menu in the settings to make sure its turned off the coast...

  Not sure where you are but you can contact HBO here:

  https://help.hbogo.com/HC/en-us/sections/200613537-international

• Constant lag with Apple TV 3rd generation

  Hello

  Bit of a ' first world ' issue, but really boring. I have Apple TV 3rd generation and also Google Chromecast. I can broadcast anything on Chromecast from a generation iPad 2, iPhone 6 Asia, my iMac 2011, without any problem. But whenever I try to play on Apple TV (including directly from the Apple TV menu), it lags horribly, plays a minute, again with wrong definition (like the old standard through the rain definition), improves and then lagging once again.

  I guess Apple to Apple would be the best, but this is the worst. Makes me wonder why I bought the Apple TV. Chromecast works perfectly, so I'm sure that's not the wifi at home.

  Any ideas?

  Thank you

  Chuck

  You should check the network configuration of your ATV. He seems to be struggling to reach the internet servers. The more reliable configuration tends to be wifi with DHCP and DNS set to automatic. Make sure that the ATV will connect to the best available wifi network. Note that, when you play back video on ATV, it connects directly to the server. This is true even for AirPlay, but not for mirroring. I don't know how it works with Chromecast, but I wonder if other devices have internet access and ATV is somehow private.

• How to make an application of third party added to my Apple TV (3rd generation)?

  I want to use VidAngel on my Apple TV (3rd generation). VidAngel told me that they wanted to add it, but Apple wouldn't allow it. Any suggestions on how to petition Apple to add it?

  Hi peredehuit

  The 3rd generation Apple TV doesn't have access to the App Store and so can't install 3rd party applications.

  Apps can only be added by Apple.

  You can leave Apple comments here.

• Apple TV (3rd generation) software update is a failure

  Apple TV (3rd generation) software update is a failure.

  • The software version is 6.0 (6646.65).
  • Model MD199LL/A
  • When I go to settings-> General-> software updates. It shows that there is an update of software available.
  • When I select "Software Update" and then "download and install" on the next screen, it is said to "Estimated time remaining", and then displays the message "the update has failed. The update to the Apple TV could not be downloaded right now. Try again later. »

  6 iPhone and Macbook Pro screen mirror does not work and I guess that's due to outdated software.

  Please help on how to fix this or how tr.

  Restore option does not as well... It gives the same error.

• Update to Apple TV (3rd generation)

  Please Apple,

  Give us an update to Apple TV (3rd generation).

  The software is 7.2 and 8.2 iOS-based.

  In this release, there are already Discoveryd buggy system service.

  All other iOS Devices and Mac OS x have been changed to mDNSResponder.

  I have to restart my Apple TV every two days, because it is not possible to connect via AirPlay.

  The Apple TV is simply not present.

  When it is restarted, it appears with Apple TV (2) or Apple TV (3).

  Apple please have pity on us and we provide an update (based on iOS 8.4) with mDNSResponder.

  We don't need no new functionality, we only want to work again.

  Thank you Apple...

  Lirex wrote:

  Please Apple,

  Give us an update to Apple TV (3rd generation).

  This is a user to user forum, you do not talk with anyone who works for Apple.

  You can leave your comments here: https://www.apple.com/feedback/appletv.html.

• resolution 2560 x 1440 has suddenly stopped working. 1080 p now the max option available

  I have 2010 macbook pro (el capitan) and ASUS H257HU monitor that supports the resolution 2560 x 1440. Until yesterday, I was able to get the full resolution, but suddenly it has stopped working and the max resolution I could get was 1080 p.

  I tried to reset the smc and NVRAM, but that did not help.

  In safe mode, I followed the suggestion of apple and was able to get resolution of 2560. But it reboots the machine back to 1080 p. Hold down the option key and clicking on the option scale does not display any resolution above 1080 p.

  I've tried searching and following some recommendations, but no permits.

  Restart the computer and enter views sometimes give 2560 option, but clicking on it makes the screen turns blue and then it always comes back to 1080 p, with no options available in the dialog on the scale. The System Preferences dialog box hangs for a few seconds.

  Someone at - he fell on the same issue and found a solution. I don't know why he suddenly stops working, while still being able to work in safe mode but not in normal condition. I tried to remove the profiles as well.

  With bootcamp (win 7), the display works fine with 2560 x 1440.

  The connector I use is screen Mini DisplayPort.

  All proposals/solutions will be very well received.

  Hello there, moths.

  It seems that you are having problems to select the resolution you want on your external display from ASUS. Great job with the troubleshooting, you've done so far. The following Knowledge Base article offers strong information to look over and review, as well as links to some additional troubleshooting content:

  Get help with graphical problems on external displays connected to your Mac.

  Before you start

  You can solve many problems of display by updating the software on your Apple devices, cables and adapters. If you see an image on your screen, look for the software updates using the Mac App Store:

  1. Connect your external display and Apple video cables or cards that you use with it.
  2. In the Apple menu, click App Store.
  3. Click updates in the window of the App Store.
  4. Install OS X updates or firmware are listed.

  If you use a display, hub, extenders or adapter not made by Apple, check with the manufacturer for updates that might be available.

  If you try to connect a screen 4 K or Ultra HD TV with your Mac, make sure that your computer meets the requirements for the use of these external displays.

  If your firmware and software are up to date, or if you don't see the image on your screen, try the steps below for your specific problem.

  {...}

  Check the connections

  Check the connections on your Mac and external screens:

  • If you use an Apple laptop computer, try to connect the AC adapter.
  • Make sure that the power cable from the external display is connected correctly and that your display is enabled.
  • If you are using a Mac Pro (end of 2013), make sure that your screens are plugged into the right ports.
  • If you use a hub of display, Cabinet or "KVM", try to connect the video cable from your screen directly to your Mac instead.
  • Unplug the video cable where it plugs into your Mac, then reconnect to reinsert the connection.
  • If you are using a video card, unplug the video adapter on your Mac, then reconnect to reinsert the connection.
  • If you use multiple video cards to connect your screen (the cards are "chained"), testing connection of the screen by using a single adapter if possible. Some video cards may not be linked together. For example, a mini DisplayPort to DVI adapter may not be connected to an adapter DVI to HDMI.
  • If your screen has more than one video connection, see if you are using another connection on the display works. If possible, check if you use a different view or a different adapter works.
  • Try using another cable that you know to be in working condition. Check with the manufacturer of the screen to make sure that you use the cable they recommend.

  Detect your display

  If you use an external monitor, sleep and wake your Mac to check for connected screens:

  1. Press the power button on your computer to standby, or choose the Apple menu > sleep.
  2. Wait a few moments, and then press a key on your keyboard or click your mouse or trackpad to wake up your Mac.

  If you use more than one screen, and you can see the image on one of the screens, you can also use the preferences monitors to check the connected screens.
  

  Adjust video settings

  If there is no image on the screen, try adjusting the brightness or contrast of the screen. If there is still no picture or image appears torn, or scrambled, try selecting a different video resolution in system preferences. Adjust brightness

  • If you use an Apple Display Monitor, press the key to increase brightness your Apple keyboard. To adjust the brightness of a secondary screen, press Control + F2.
  • If you use a view that is not made by Apple, see the documentation that came with your monitor to see if it includes built-in controls to adjust the brightness or contrast.

  Change your display resolution

  1. In the Apple menu, choose System Preferences.
  2. Click the display icon.
  3. Click default for display. If you see more than one resolution listed, choose a resolution and refresh rate. If the display turns off when you change resolutions, press the ESC key to cancel the change.
     

  If you can not change the resolution of your screen because you see no image, restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  Search for software third display

  If your monitor only works when your Mac is started in safe mode, and related to the software display is installed, check with the developer of the software for updates, or try to uninstall temporarily.

  {...}

  Get more help

  If you have tried these steps and your screen still does not work, contact the Apple support for more help.

  Thank you for being a part of the communities of Apple Support.

  See you soon.

• Internal speakers Satellite C640 suddenly stopped working

  Hi friends,

  My satellite c640, internal speakers suddenly stopped working but works fine when the headphones or external sources are connected
  Is this a hardware problem?

  I m using win 7 64 bit and I tried to install the drivers but seems to be a hardware problem

  Thanks in advance

  Hello

  I don't know if it is a hardware issue of m.
  You may need to check certain settings.

  In Control Panel-> sound-> the Read tab.
  You should see the speakers selected as the default device.
  You can also click these speakers to the right and you should see a few options:
  Speaker Setup
  test
  Disable
  and so on.

  Test the speaker first. In my case, a short tone is displayed. You can also mark the speaker and click the properties button. You will see a second window with tabs. Check the second tab called LEVEL. Here, you can change the sound level.

  What happen exactly when you try to reinstall the sound driver? You get errors?

• Satellite C650 - sound suddenly stopped working

  Hello.

  I bought this laptop the month last November.
  in any case, around a week or two ago, the noise suddenly would not work.

  He started making strange noises when I put in the headphones and speakers just made no noise at all never.
  I did a lot of weird things - like system restore, reinstall audio drivers but nothing worked until I updated the bios, then everything went well and the sound worked again.

  However, today, the sound suddenly stopped working again. I tried to re - install the current bios but InsydeFlash says: "the version of the ROM file is the same BIOS version" and just closes.

  I searched the internet for an older version of the bios, but when I try to install it, InsydeFlash said: 'the version of the ROM file is not newer than the version of the BIOS' and of course, I know that but then it closes too!

  I'm not really good at computers or anything, any help at all would be appreciated.

  Thank you.

  Hello

  I recommend checking some options first;
  -check if mute is not activated
  -check if all the volume controls are set to a higher value
  -check if the sound using headphones

  If this is not successful, you must reinstall the audio driver.
  First go to Device Manager and uninstall the audio driver. Restart the device
  Download the audio driver from the Toshiba page, then reinstall it. Reboot once again and test the sound.