Apple TV gives up on WiFi association after awhile

Similar Questions

• Anyone with the problem of not show apple tv on the same wifi to connect the new application remote control (with the last operating system both on device)?

  Tried to connect the new (launched in July 2016) Apple Remote app, I'm not able to add the Apple Tv from my iphone (5 c), because it does not show apple tv to connect even on the same wifi. I use the latest os on iphone and TVos 9.3.3.

  9.3.3 isn't the latest version of the software for your phone or your Apple TV.

  Try the following steps for the Apple TV 4, check if things work after each step if necessary, before you try the next.

  1. Restart the Apple TV (settings > system > restart).
  2. Restart the Apple TV by removing ALL cables for 30 seconds.
  3. Restart your router. (Also try to remove the power cord for at least 30 seconds)

• my apple TV remains out of sync even after sleep

  my apple TV remains out of sync even after sleep

  Could you give a little more detail, please? What is out of sync with what?

  And just for reference, which is the version tvOS on your ATV?

• Recovery WIFI connection after sleep mode activation takes much too long

  This question of provenance in this thread: http://answers.microsoft.com/thread/b7916ba7-3e34-4ee2-a6e7-bba2fa65508b (title: "HELP!") Driver issue Microsoft Virtual Wifi Miniport Adapter (error code 31)").

  Basically, the presented solution it works for me too. However, the command "netsh wlan set hostednetwork mode = ban" does not get persistent, thereby affecting

  "stop wlan netsh hostednetwork" gets persisted, however.

  'do not command netsh wlan set hostednetwork mode = allow' does not get persistent...

  In other words, current enforcement in exactly ONE time orders-Admin-helps prompt - as soon as I wake my machine to sleep after running it, the WIFI connection gets restored quickly (less than 5 seconds); but when I check the status with "netsh wlan show hostednetwork", then the result is that the mode is set to "Authorized" again - and that means, the next time that I wake up the machine, it takes ages to new (~ 30-50 seconds) before connections WLAN gets implemented...

  Does anyone know how I can get the mode = do not allow to persist?

  Another fact interesting, that I found before I was running on the solution by using the NETSH commands:

  If I change the ' password on the reactivation of the "option of energy saving"require a password (recommended)"to"Don't require a password", it's okay, about the period of time it takes to establish the WIFI connection after wakeup (in other words, even without the NETSH commands described in this thread).

  So, from my point of view, it seems to be that something related to security (probably in association with this kind of things hosted network).

  The problem: disabling of "Protection of password on wakeup" is not a solution to everything, for me personally, as I am quite often on the road with my laptop, and I want to be sure that the data on my laptop is not accessible without unlocking the screen, in the case where the unit would get stolen or I loose it somehow... to protect all customer and other data sensitive data to this topic...

  Any professional entry of someone at Microsoft to finally have a solution for this would be greatly appreciated.

  My hardware: Sony VAIO VPCSB3X9E/B

  See you soon,.

  Franz

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Forums. Please post your question in the TechNet forum.

  http://social.technet.Microsoft.com/search/en-us?query=wireless%20networking&AC=1

• HP Pavilion Notebook - 15-p206: WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10

  Hello
  
  WiFi lost after updating the BIOS of HP Pavilion Notebook - 15-p206tx on windows 10.

  Update driver BIOS update effective system is rebooted and the wifi does not.
  
  Please help me.

  In the box to Ask Me whatever it is next to the Windows icon, type in "Installed updates", and then click view installed updates.

  Select the update that is dated from when you had the question.

  Click it to uninstall.

  You have to restart the laptop afterwards.

• Apple Watch gives a warning sound or vibration when it is out of reach with your iPhone?

  Apple Watch gives it its warning or vibrates when it is out of reach with your iPhone? If so, how to set up? If this is not the case, why they have this important function, so we do not lose our phones?

  Hello

  Apple Watch does not currently offer them alerts audible or haptic if it is taken out of the reach of the paired iPhone Bluetooth. When devices are disconnected via Bluetooth, if the watch is also impossible to connect to a Wi - Fi network, known at that time, it will display the icon disconnected at the top of the face of the Watch:

  

  However, you can find this application useful third party:

  • Lookout - security, backup and missing device
    • "Tells you the distance between your iPhone and Apple Watch and warns you if they are about to lose the connection."
    • https://iTunes.Apple.com/us/app/lookout-security-backup-missing/id434893913?Mt=8

  If you want to suggest that Apple considers adding Bluetooth disconnection as a built-in alerts, you can do so here:

  https://www.Apple.com/feedback/watch.html

• WiFi lost after winning 10 improvement on Satellite P745-S4217

  Help! WiFi lost after upgrading to windows on my SATELLITE of P745-S4217 10

  Drivers have installed successfully but when I troubleshoot, windows tells me wireless capability is turned off

  I search on the net, but still no solution to my wireless connection interruption

  Any help will be appreciated thanks

  Hello

  In the past, you need to turn on the WiFi using the FN keys, but I think that this should not be necessary to help to win 10.

  In any case, I think that you must connect to the laptop to the internet using LAN cable.
  Then, you must uninstall the WLan Device Manager driver.
  After that, restart the laptop in order to win 10 to select the Wlan driver automatically.

  As far as I know that Win 10 must check for new drivers available WLan and in the best of cases after the update, the WiFi connection should work again.

• WiFi problem after upgrade to Windows 10

  Greetings!

  I read a few posts on WiFi problems after the (improper) upgrade of Windows 10. I have a ThnkPad T530 which I've upgraded to Windows 10 Windows 7 in September (too late to roll back). Here's my question:

  I have three computers on my desk. This standard T530 running Windows 10, a ThnkPad E555 running Windows 7 and a Dell running Windows 8. I used all three last Friday. I installed Norton on all three Friday and everything went without a hitch. When I first started their return to the top of this morning, the two others came online as usual. The ThinkPad T530 connected by a router in the company, but has no access to the internet. I can connect to the hotspot on my phone and it connects fine. I tried to turn the WiFi connection and then turn it on again, restart, by killing and restarting the business connection, etc. Nothing changes.

  Help, please

  Ben

  Try the following:

  Open administrator command prompt:
  http://winaero.com/blog/how-to-open-elevated-command-prompt-in-Windows-10/

  Then, run this command:
  netsh int ip reset c:\resetlog.txt

• Wifi Hotspot after Lollipop 5.0.2 update questions?

  Hi all

  I would like to know if anyone has any questions of wifi hotspot after Lollipop 5.0.2 update. I can't share my internet connection phone, hotspot is there, computer laptop to connect but I can not load Web sites. Strangely, I can use Skype, but that's all. I have the same problem with USB Bluetooth ICS and as well. Did somebody encounter this problem? Thank you.

  
  

• How to get wifi connection after reinstalling factory default DVD for Iconia W3-810?

  My W3-810 Iconia has been reset using Acer Recovery DVD. After that 8 window has been restarted, he not been able to find the wireless device.

  Does anyone know how to get a wifi connection after reinstalling factory default DVD?

  Best is to download the drivers for a different machine, then transfer to the W3 with a USB or SD card. Once they are installed included you be back running.

• WiFi problem after update of lollipop

  Is anyone having problems with their wifi connection after updating to the pacifier. Mine was working fine before the update. A move 35mbps ookla speed test download when connected to my home fibre broadband before the update, but now even hit 1mbps after update. Keep buffering when watching videos. Home broadband Checked speed on pc and getting 34mbps so it's not my Internet problem. Would appreciate ideas. Thanks.Using xperia D6603 z3.

  That's what I'll do, fix the phone with PCC

  PC Companion (CCP)

  Bridge (for Mac)

  Alternatives on how to backup Xperias

  http://talk.sonymobile.com/thread/36355

  and uninstall any antivirus > check again.

• After awhile, the aero theme runs with a lot of delay and low fps

  I noticed this problem for some time now. My Office is many running themes aero after awhile. Normally, it feels like running on a smooth surface, 50 to 60 images per second. But after a few minutes, all of a sudden its down to 10 or 15 fps , which is almost unusable.

  Workaround so far is to disable aero theme by switching on the Windows basic theme and then back to Aero. But within 5 minutes, its back to the drawing board. Because the whole "of the drawing Office" fps is reduced, using programs such as Firefox or Premiere Pro, Photoshop or even a video player is a pain. However when I run a video game Crysis etc, the fps is fine and the game takes place as it should. Anyone with the same problem? Any solution?

  CPU: AMD Phenom II X 4 955

  GPU: AMD Radeon HD 5970

  Memory: 6 GB

  Storage: About 400 GBs free

  Drivers: Catalyst 14.9 (later). I had this problem with previous versions of pilot as well.

  Windows: Windows 7 Ultimate SP1 (64-bit)

  Average CPU usage: ~ 2%

  Hello

  Thank you for the update.

  Please run the following fix and let us know the result.

  Visual effects Aero Glass in Windows are not working or displayed

  I hope this helps.

• iPhone & iPad with the same Apple ID, Wifi Dead after # 21 #, cannot call the specific number

  Hi guys, I really hope someone can help out me with this one. Long story short:

  After a week of vacation when we left our iPhone and iPad at home, my girlfriend's iPhone did get any cell phone signal when we came back, said network unavailable in the upper left corner, then we called Fido, the cell phone company, we use to try to resolve the problem. After trying to isolate the problem by changing my SIM card in the phone and SIM card in my phone, we saw that it was related to his SIM card.

  The key to reset cell phone network, has changed twice between the SIM card and after a good 24 hours, his phone was on the right track with the exception that it was not able to call me and only me. We get an error call failed. But she was able to receive calls from me and everyone else. Also, we were unable to set up the voicemail.

  As if the phone thought she was my line because of some flying over the passage of my SIM card in the phone...

  This is the first problem... That we called Fido again. After the usual troubleshooting stuff (reset the network settings, restore the device in iTunes, force the restart, eject and put in the SIM card) the Lady on the line calling in the phone app, the number "# 21 #". Then BAM! no more WiFi on his phone AND his iPad connected to the same Apple ID (not a network problem as all the other device not associated with this specific apple id are ok with this network and wifi iPad literally fall from the moment I hit that famous number) when I press on my wifi network in the list It behaves as it accepts the password, but all is not connect with the wheel spinning without end.

  Thus, employees of die cell phone are clueless and now she can't call me and she can't go on the internet with none of its aircraft. I tried a full restoration of his phone.

  Tomorrow I will try the iPad on my place of work to see if it can connect to the anther wifi network, pending:

  1-don't, anyone know what this # 21 # code is and how I can repair the damage he has done?

  2-is my SIM card remains on his good theory and if so, what can we do about it, if not then what could cause his phone to have a call to a number failed error in particular?

  Thanks in advance!

  Not sure about the theory of SIM card, but my guess is not... don't dwell settings. The SIM card must be "read" on every power up.

  The code in what she you punch is a mobile PHONE for call forwarding. She must have felt you have enabled I guess. It shouldn't be anything else stop call forwarding for his phone, if it was enabled.

  

• Problem getting my WiFi connection after the mode 'sleep'

  After my computer wakes from sleep mode, I click on my WiFi network every time to get on the internet.  If I restart my computer, it detects my WiFi network and connects ok.  It's just at the time when it wakes from sleep.  I tried many solutions that people have posted for example to remove some files from my SystemConfig., but have had no luck.

  Hi joycefromil,

  I understand that your Mac has problems automatically re-login to a Wi - Fi saved after wake up from its sleep. I can understand the concern here; It seems that it would be a bit tedious to have to re - connect manually whenever you wake your Mac from sleep. I'm happy to help you with this problem.

  As a first step, try to remove your Wi - Fi network in the preferred networks list and then add again using the steps here:

  macOS Sierra: choose the preferred Wi - Fi networks

  Try to test for the problem to see if it persists. If so, I recommend that you try to start your Mac in safe mode and test for the issue. Once you're done test in safe mode, restart your machine normally and try test again to see if the problem has been resolved.

  If the problem persists in safe mode, try to create a test on your Mac user account to see if the problem is here. This will help to further isolate the issue. Take a look at this Web site for more information:

  How to test a question in another account on your Mac - Apple Support

  Take care!

• WiFi, stall after iOS 10

  MY wifi is randomly after cutting 10 upgraded ios.  Anyone elese?

  Here's a tip for the user on the problems of Wi - Fi. Suggest from the top and bottom.

  (1) restart you device. If a normal restart does not help, hold down these keys at the same time for at least ten seconds, until the Apple logo appears: a) the sleep/wake button and the low Volume button (7 iPhone iPhone 7 and more) or b) the sleep/wake button and the Home button (all other models)

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth). Channels 1, 6 or 11 are recommended for 2.4 band.

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available. Also turn off all apps to VPN and retest the Wi - Fi.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) backup and restore the device using iTunes. Try to restore as New first and test it. If ok try to restore the backup (the backup may be corrupted).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple store for the evaluation of the material. The Wi - Fi chip or the antenna could be faulty.

  Council: https://discussions.apple.com/docs/DOC-9892