Apple TV Home Sharing very slow loading!

Similar Questions

• My iPad WiFi Air video very slow loading same 3 full bar signal

  My iPad WiFi Air video very slow loading same 3 full bar signal... Any suggestion?

  Should I send to AppleCare or upgrade to the latest version of iOS?

  Yes, update to the latest version, 9.3.1. Also here are a few general suggestions for problems of Wi - Fi. Suggest you start at the top and down, maybe they'll help...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• Have new 4th gen tv apple. Home sharing is on. I'm unable to access my music library on my MAC other than a few titles that have been purchased. How to access my entire music library?

  Have new 4th gen tv apple. Home sharing is on. I'm unable to access my music library on my MAC other than a few titles that have been purchased. How to access my entire music library?

  Welcome to the Apple community.

  You wonder if you might be looking at the wrong place. You can watch/listen to house content shared app for computers not the music app.

• Explorer 8 is really bad compared to 6. It hangs very, very slow loading, if cela an inprovement, then you are in trouble!

  Explorer 8 is really bad compared to 6. It CRASHES constantly, is very slow loading. If cela an inprovement, then you're in trouble. The difficulty of this piece of garbage!

  Hello goodwrench70, welcome.

  Internet Explorer 8, the conditions are correct, will run at normal speed. If the browser is slow or if it crashes, it could be a number of possibilities.

  My suggestion would be to first try and launch IE8 in no add-on mode. This will allow us to see if maybe something 3 rd-party is causing the problem.

  1. click on START
  2. click on "programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on 'Internet Explorer 8 (no add-on).

  If the browser still runs slowly or crashes, you can place the machine in a clean boot state.

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  If the browser still runs slowly or crashes, you can try using a different browser to see if the problem is systemic, or just with Internet Explorer. Search "Web Browser" in your search engine. There are a number available there.

  If another browser to work properly, then I suggest to uninstall and reinstall Internet Explorer 8. After the reinstallation, I go to Windows Update and download all the updates that are available for IE8.

  Link reference for the manual uninstall IE8: http://support.microsoft.com/default.aspx/kb/957700

  Hope this helps,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• very slow loading

  Hi, I have a very slow loading in my site. Here is the link:

  Print

  Please, any advice on how to can improve load time?

  Thank you

  Ignacio

  I recommend that you only contact QooQee for questions about this page runs. 90% of the code for this page comes from a QooQee widget that you use. Only the outer shell of the page, it's that anything generated by Adobe Muse.

• Apple TV 4th generation very slow to load movies (MP4)

  I get a 4th generation Apple TV to replace my old Gen 3. When I try to load a movie from my iTunes Library (on my Mac Mini), it really takes a lot of time to start the movie or it doesn't start at all. This unit is connected to the same network as my older Apple TV which plays MP4 files without any problem. Everyone knows about this problem? I'm running the latest available updates. All other features, including playing movies from iTunes or Netflix app work fine.

  I had problems with home sharing, usually. I'm on my second unit.

  What type of router you are using?

• Since installing Windows 10, Thunderbird very slow load and run. Is there any solution for this? RESOLVED itself. cause: unknown

  It is not the only slow feature on this PC since installation W10. Internet Explorer is also very slow to load.

  Start * Windows * safe mode with active network
  -win10 http://windows.microsoft.com/en-us/windows-10/change-startup-settings-in-windows-10
  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?
  Just reply to inform us of the results.

• Apple TV home sharing does not (10 Windows, iTunes 12.4.1.6)

  I have two 3rd generation Apple TV in my house and home sharing used to work perfectly on it when the contents of the copy of iTunes on my desktop Windows 10 streaming. But since than do a clean install of Windows 10 that has not worked.

  I search online for the solution and have tried everything... but nothing works.

  It is not the firewall on the computer or the router by turning off both makes no difference

  Running iTunes in mode of different compatibility does not help

  Change the name of computers do not do...

  Someone at - it any other ideas?

  AirPlay works perfectly, it's just the sharing House that doesn't.

  Thanks in advance

  For home sharing work, ATV and iTunes must be on the same Apple ID This does affect airtime. Check the ID on your iTunes. You can find information here for help with home - sharing Apple support. Moreover, the firewall of the router, which focuses on internet traffic has nothing to do with it. The Windows Firewall must open certain ports to allow communication between different machines.

• Sony xperia z2 smartphone very slow loading

  Hello.

  I have a Sony Xperia Z2 phone.

  Now recharges very very slow. What should I do?

  Thank you.

  Hello, geo1392!

  Thank you very much for your answer! Wow, it takes 4 to 6 hours to recharge your phone? I don't think it's normal. The maximum, he should take is probably 2 or 3. When he is around 70 or 80, this is less than an hour, I think. Once, I had one of my phones Sony power drain, but to load completely new, it certainly didn't take 4 to 6 hours, so it might or might not be normal.

  It is good to know 100% and that battery normal.

  I think the app that you are talking about is called Smart Connect, and it is a very good software! This app is made by Sony, and if it makes your phone costs more quickly, then you should definitely use it! This app is completely safe to use!

  If you have any questions or if you need further assistance, do not hesitate to contact Sony Mobile Communications, because they are always happy to help!

  http://support.sonymobile.com/global-en/contactus/

  Best regards and have a nice day!

• vSphere Home Lab: very slow network speed, I'm desperate

  Hello

  After many trials that I have finally found the right hardware build my vsphere home laboratory.

  This is my setup:

  ESXi1

  ASUS P6T Deluxe V2

  I7 920

  24 GB OF DDR3 MEMORY

  2 x Intel Pro 1000 GT Desktop Ethernet adapter

  2 ESXi

  i5-2500

  16 GB OF DDR3 MEMORY

  1 x Intel Pro 1000 GT EthernetDesktop adapter

  NAS

  ASUS P7H55-M

  Intel Core i3-540

  Windows Server 2008 R2 with Starwind iSCSI

  Realtek Gigabit Ethernet

  I have a Netgear GS108 where I plugged all the ethernet cables over my ADSL Modem, a Linksys WAG320N

  Everything is OK apart I have a speed very very slow in the network; for example ISO 2k8r2 server transfer I take 30 minutes

  After many trials, I decided to start from scratch, I just powered on my ESXi2 machine and reinstalled ESXi 4.1U1 from scratch and I installed the Client vSphere for my Client PC which have a Gigabit Ethernet card and is also attached to the switch Gigabit however, speed is still the same, 2/3 MB / s.

  The strange thing is that also the same speed very slow, I created a Server 2008 VM and installed iperf to landmark of network and I get about 600 / 700 Mbps, so I really don't know what I can do.

  I replaced the ethernet cables, also tried to connect the cables directly to the modem and also I tried with another switch, but the result is always the same.

  He is now a cable or switch problem because I tried to create an iSCSI drive and transferred a file of 10 GB of my Client PC to the iSCSI disk and I get about 120 MB/sec so is full Gigabit network speed.

  Also, I installed FileZilla FTP Server on the ISCSI server and tried to download and upload a file of 10 GB and the speed is never 115 / 120 MB/s.

  Really, I don't know what I do that, I'm really desperate.

  Thank you very much for your help.

  Routers are NOT created equal.  There is a business reason switches cost $10,000 - $20,0000 dollars.

  Netgear router / switch is just a very BASIC.  It's not classy company.  That's your problem.  Get a better switch that you don't need to spend $10,000 but probably a few hundred... a GOOD show for home switch...

• After you download el capitan my very slow load mac

  Because I downloaded el capitan my mac charge very slowly.  Safari pages are very slow and my computer crashes often

  What iMac what memory?

• Why all this very slow loading on my computer lately?

  When I click on a program to open it, it is very slow to open an it.when I am online, sometimes it just freezes

  Hi dls4u2c,

  1. Did you the latest changes on the computer?
  2. You receive an error message on the computer?
  3. You have security software installed on the computer?
  4. When was the last time it was working fine?

  Method 1

  Check if the problem persists in the safe mode and after back with the results.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Method 2

  If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  How to make a computer faster: 6 ways to speed up your PC

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Qosmio G30 - software very slow loading

  I have a Qosmio G30 P650 unit and had since 2009. Two weeks only noticed during the bars running under the windows xp loading Win Xp logo slows down and it takes a long time to load windows. He had no other choice but to re - install the software using the recovery CD.

  However, I found that in a first time, the device works well after the resumption, but after turning off and leave for a while and turn it on again a few hours later it's the same thing. The software is loading very slowly. But in safe mode, it's fast.

  What is a hard drive problem? There was a time after that reloading the recovery software (even clear partitions), the software will load more slowly. Sometimes after recovery, it is normal but after reboot, the problem repeats.

  Can someone tell me what could be wrong with this laptop?

  Thank you very much

  > Is this a hard drive problem?
  Perhaps.

  Must test the HARD drive for errors possible there are many diagnostic tools that could test the HARD drive.
  For example: HDD Regenerator 2011, SMARTReporter 3.0.4 or the freeware software called Drive Fitness Test.

• Big LOV is very slow loading

  Hello world

  My Tester BC4J loads very slowly now that I added a LOV referring to about 5000. Slow performance is normal with BC4J Tester? Is there something I can do to improve performance?

  As you can see, the query is simple (and takes less than a second). For the test, I restricted to a single PERSON_ID and BC4J Tester still hangs.

  select PerAllPeopleFEO.PERSON_ID,
         PerAllPeopleFEO.BUSINESS_GROUP_ID,
         PerAllPeopleFEO.CURRENT_EMPLOYEE_FLAG,
         PerAllPeopleFEO.EFFECTIVE_END_DATE,
         PerAllPeopleFEO.EFFECTIVE_START_DATE,
         PerAllPeopleFEO.EMPLOYEE_NUMBER,
         PerAllPeopleFEO.FULL_NAME,
         PerAllPeopleFEO.START_DATE
  from per_all_people_f PerAllPeopleFEO
  where 1=1
  and PerAllPeopleFEO.business_group_id = fnd_profile.value('PER_BUSINESS_GROUP_ID')
  and PerAllPeopleFEO.current_employee_flag = 'Y'
  and trunc(sysdate)
     between trunc(nvl(PerAllPeopleFEO.effective_start_date, sysdate))
     and trunc(nvl(PerAllPeopleFEO.effective_end_date, sysdate))
  and trunc(nvl(PerAllPeopleFEO.start_date, sysdate)) <= trunc (sysdate)
  order by full_name
  
  

  James

  Hi Shay,

  Thanks for the reply. You are right that the user will enter a partial value in general. But, my effort is still in the phase of model development; There is no UI yet which means that I've been using the BC4J tester for everything. And I don't think that the LOV would be filled unless it has been invoked.

  However, I went back and change the default list Type to 'Input Text with a list of values', and that solved the problem of the slow charge.

• Mini IPad 2 very slow loading

  Hello, I received the new mini IPad 2 on Ebay and I figured that he was charging slow due to 5W wall adapter that I had with the box by the seller. Then I got to know 10W is recommended adapter for the IPad and I have also tried with 10W and got the same charge rate. I don't know why? Can someone please sort me.

  Thank you

  LAvdee

  How long does it take to load?