Apple Watch will pair an iPhone 5S for the first implemented

Similar Questions

• The album art to music Apple AirPlay or Spotify is only shown for the first song

  Apple TV 4 running tvOS 9.2

  Antenna of the iPhone 6 s running iOS 9.3.2

  When the music plays to Apple TV since iOS album art appears for the first song in an album or a playlist. After the next song, the album art shows a gray music note. It's intermittent, but it happens often. Seems to happen more consistently with Spotify, but also happens with Apple music.

  I've noticed that when my ATV 4 AirPlaying Slacker Radio. In my case, they are long unique jazz tracks, and the album cover cannot paste at the end of the track. Of course, lazy, don't return because it has already been sent. I guess the software decides she has had enough and deletes the image. You can try to post on the site of feedback to Apple, but I think it will be a low priority.

• Pre-load Palm TX - what will happen when I Hotsync for the first time?

  I bought a 'medical' Palm TX Ebay delivered pre-loaded with lots of software.  I want to save the unit since I have no way to recover it in case of hardware/software/human error.

  I downloaded & installed Hotsync 6.2 but I'm afraid to try the Hotsync because the documents of the seller warned do NOT hang on to my computer because it damage my programs.  Why would I NOT want to do?  What happens during the "1st" with a PC & Palm Hotsync.  The PC formats the Palm?  Can I control who and keep him to crush and run the Palm over the PC profile on 1st sync?  I know that I can come back it up after the PC & Palm are synchronized, I'm just afraid it will clear things if I do not pay attention.

  Bottom Line: I want to protect the investment, but information from the seller have me worried that I would lose it all by using the native Hotsync tool.  Should I be afraid?

  Be afraid... Be very afraid!   I hope that the bottom does not apply to your purchase, but we have heard this story before.

  There are a lot of scams on eBay with preload Palm devices.  Many of them use pirated software.  No respectable seller of Palm devices with any conscience at all wouldn't you to "not HotSync. This should send red flags floating and alarms goes off!  I have several medical programs on my TX, and they are not cheap by any means.

  It is possible that the programs will be 'home' to the author of the programs and will try to check the recording.  If the software is pirated, the registration process may come to an abrupt stop, and the program will not work!

  Did you get a Palm to purchase installation disc?  Do you have codes for registration for medical programs?  I bet that you do not have...

  You have a choice to make.  Keep the appliance and do not use it for all 'normal' functions that involve HotSync or return the unit as soon as POSSIBLE for a full refund.  Palm TX can be found on amazon.com and there are a lot of available medical software - the two freeware and for purchase.  Skyscape.com is one of the best suppliers autour and very probably has anything that your specialty needs.

  WyreNut

• Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Why can I not hear my 6plus iPhone calls after loading the Apple Watch? If I don't answer the iPhone instead of the Apple Watch for incoming calls?

  Hello

  It can help to cancel your iPhone in a Bluetooth headset pairing, if it is currently associated with it.

  -On your iPhone, go to: settings > Bluetooth > tap the info "i" beside your headset > tap Forget this device.

• Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Is there an app Golf GPS for the Apple Watch series 2 which is "native" to the watch, in other words, should NOT be tied to an iPhone on the golf course?

  Hello

  You can find this app of interest:

  • PING
    • https://iTunes.Apple.com/us/app/ping/id440740108?Mt=8
    • http://www.Ping.com/about/insideping.aspx?ID=21779

• Apple Watch will not unlock MacBook

  I have a Macbook 2016 on MacOS, iPhone 6 more current iOS10 of execution, first-generation Apple Watch running Watch OS3 and two steps on authentication.  As shown in the screenshot below, I was able to check the possibility of allowing my Apple Watch unlock my Mac.  He looked the watch and then checked.  I did this several times, however, it will not unlock the Mac.  New features to copy and paste between devices, etc seem to work well, but I can't get the unlocking function to work.

  

  Hello wow321,

  Thanks for asking for help with unlocking you Macbook with your Apple Watch here in Apple Support communities. We commend you for updates latest and your devices. Also, please check the things you already checked. I will do my best help to offer things to get this working as expected.

  I have personally reviewed article for help to unlock your Mac with your Apple Watch which is here: automatically unlock your Mac with your Apple Watch. The first thing we want to do is to check that everything is correctly configured through this step by step article once more.

  A confusing area for some people is the type of security on their Apple ID. The State of necessity who need a Apple ID to use instead of the two-step verification two factor authentication. Please check the type of security on your Apple ID using this help article that deals with two factor authentication: authentication two factor for Apple IDand this second article of help dealing with two-step verification: frequently asked questions about two steps checking of Apple ID.

  If any snippet and you still have questions, I recommend you make a backup of all your data on your iPhone to make sure that everything is safe. You can perform a backup to iCloud or iTunes. Use this article to help with this: backing up your iPhone, iPad, and iPod touch.

  Then, try to turn the iPhone, with the Apple Watch is paired both devices Mac, power off and on. Sometimes, that's all that is needed for connections reset and everything working properly again.

  If you're still having problems, please cancel the twinning of your Apple Watch from your iPhone by following the steps described here: pairing your Apple Watch and iPhone. Reset the network settings on your iPhone under settings > general > reset > reset network settings. This will remove not your personal information (contacts, photos, calendar of events, etc.), but it will remove networks WiFi recorded and passwords, as well as all the APN or previously used VPN settings and Bluetooth devices connected. After the reset of the iPhone, pair your Apple Watch with your iPhone again and check if the Apple Watch can then unlock your Mac.

  Thanks again for asking for help with this here in Apple Support communities. Have a great rest of your day.

• Unable to receive calls from Apple Watch, using WIFI AT & T calls, when the iPhone is turned on, turned off or in Airplane Mode.

  I work on this issue and wanted to involve the community.

  I have tests the functionality Apple Watch and have been unable to solve my problems with WIFI call. I use the AT & T and I am connect to the strip of the 5 GHz on my router Xfinity.

  I am able to make/receive calls from my iPad and Mac laptop when iPhone is off / Mode plane; However, this feature does not work on the watch. I can make and receive calls from the watch when the phone is turned on.

  Another problem is that I am not able to send and receive messages (blue or green bubble) of the watch - once again when the phone is turned off or in flight Mode

  I'll copy in 2 portions of the Web site: http://help.apple.com/watch/

  http://help.Apple.com/watch/#/apd0443fb403

  If your Apple Watch is in range of a Wi - Fi network that the iPhone is connected to before, you can always do the following (even if the iPhone is off):

  • Send and receive digital messages Touch
  • Send and receive messages using Messages
  • Make and receive phone calls (if you have active calls, Wi - Fi, and you are within range of a Wi - Fi connected to your iPhone before)
  • Check current weather conditions
  • Track your inventory

  http://help.Apple.com/watch/#/apd2fe746e86

  Make calls via Wi - Fi

  If your cellular operator offers Wi - Fi calls, you can use Apple Watch to make and receive calls over Wi - Fi instead of cellular network - even when your pair iPhone isn't with you or is disabled. Apple Watch comes to be in range of a Wi - Fi network that is connected to your iPhone in the past.

  To see if your carrier offers Wi - Fi calls, see the article Apple Support phone with Wi-Fi calls, then enable the calls on your iPhone and Apple Watch Wi - Fi.

  Note: You can make emergency calls via Wi - Fi, but when possible, use rather iPhone over a cellular connection - your location information will be more specific.

  Enable on iPhone Wi - Fi calls. On iPhone, go to settings > phone and turn on Wi - Fi calling and application to other devices.

  Enable calls on Apple Watch Wi - Fi. Open the Apple Watch app on iPhone, tap My Watch, tap phone, then turn on Wi - Fi calls. If you do not see the parameter, make sure that you have activated calls on iPhone Wi - Fi.

  Answer please if you are able to perform any of these functions! And any troubleshooting you can think!

  AspiringAppleGuru wrote:

  I have... to connect to the 5 GHz on my... router bandwidth.

  Hello

  These features are not available because Apple Watch cannot connect to a network of GHz Wi - Fi 5.

  If your watch is not connected to your iPhone via Bluetooth, but lying in a 2.4 GHz Wi - Fi network your iPhone plugged in before, the watch can connect to this network and you can continue to use certain features, including Wi - Fi calls (when it is supported by your operator, you already have in place).

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

  Use Apple Watch without her sister iPhone - Apple Support

• My Apple Watch will not charge on the charger.  I cleaned the back of the watch and the charger.  Any ideas?

  My Apple Watch will not charge on the charger.  I tried to clean the back of the watch and the charger more used several points of sale, but in vain.  Any ideas?

  Hello

  When you reload your watch, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it.
  • You use a real Apple magnetic Charging Cable or a certified Apple module magnetic charge.
  • If you reload your watch by plugging into a power outlet:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Try to use different maps of the following:
      • The real Apple USB Power Adapter that came with the watch, or;
      • A true 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try to charge via a USB port (see following).
  • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).
  • If your battery is very low, you may need to wait a few minutes for the green lightning appear (confirming that the charge has started).

  Once the load has started, you can tap on the screen at any time to check the progress (leave a few minutes at the beginning, where the watch is in charge of a very low battery level). A green lightning bolt symbol indicates that your watch is being loaded. It is normal the screen back to sleep while continuous load.

  More information:

  Check your battery and load your Apple Watch - Apple Support

• Is it possible to use the Apple Watch with bluetooth and data celular (for example in a remote area withouth wifi)?

  Apple Watch with bluetooth

  Hello

  Apple Watch can still be used in conjunction with the matched iPhone (which is based on cellular services) in places where there is no Wi - Fi network.

  The availability of some built-in and third-party applications can vary, depending on your cellular data settings and a network of cellular data speeds.

  If your question relates also to longer term, it is not currently possible to update the software on Apple Watch unless the paired iPhone is connected to a Wi - Fi network.

  Some built-in functions of Apple Watch can still be used even when the pair iPhone is not available via Bluetooth or Wi - Fi.

  More information:

  Bluetooth and Wi - Fi on Apple Watch

  Use Apple Watch without her sister iPhone - Apple Support

• Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Dictation fails continually on my Apple Watch.  I tried to restart both the watch and my iPhone 5 and checked that the Seri is enabled on my phone.  Any suggestions?

  Hello

  Please specify the circumstances in which dictation is a failure.

  For example, what are you doing and what message error you see?

• How many hours of music a Apple Watch will play on 1 charge

  How many hours of music a Apple Watch will play on 1 charge? I am trying to determine how much battery life I can start to play already recorded music (no streaming) from a Apple Watch.

  http://www.Apple.com/watch/battery.html

• How to convert an apple store gift card to buy apps for the iphone?

  How to convert an apple store gift card to buy apps for the iphone?

  Try to buy a gift card iTunes Store with her. Apart from that, you can't.

  (140402)

• Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Whenever I try to update my iPhone 6 for the ios10 it is said it is impossible and that an error occurred during the installation? I ' have enough free space, so I'm not real why he keeps now.

  Try to update via iTunes.

  See you soon,.

  GB

• My update to Apple Watch has suspended how can I get the update?

  My update to Apple Watch has suspended, how can I get the update?

  What do you mean by "break"?

• Turn on iPhone 5 s for the first time?

  Hello

  I just bought all new iPhone 5 S in a shop and after I searched (google) answers with regard to the maintenance of the battery, I'm a bit confused. Some say it is wise to drain the battery until the phone turns off and that completely... some people say that is nonsense so that you must charge your phone charge straigh away from the box and don't let not phone to turn off... some are mentioning the procedure 3 hours but I know it's nonsense...

  Can you tell which procedure is best for the first time.

  Thank you very much.

  Here's what I consider some good advice on the pricing of your iPhone:

  When to charge your iPhone or iPad