Application Builder «Browse to LabVIEW.exe» error

Similar Questions

• Schedule for the opening of the application on Tungsten E Palm.Exe error

  I have a Tungsten E (no disc of original material) which was working fine until yesterday. I can't open my calendar, even though I can open all the rest and receive an application Palm.Exe error. "The Exception integer division by zero".

  "(Oxc0000094) occurred in the application at location Ox67cz6F22. When I try to send the error message, it freezes all the Palm application. -Without the installation discs original can I do? Delete the files from my hard drive (and if so, which ones) and then re - sync? Instructions are appreciated.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/TUNGSTENE/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  There is a link on this page for Palm desktop that you can download.

  Here are the instructions for XP to uninstall "own."

  You should first make a copy of your data to have just in case something
  is happening. You can find your data files by going to C:\Program Files\Palm or
  A Palm. Highlight your Palm Desktop user name and right click and copy.
  Then, go to the desktop of your PC, right-click on a blank spot block and select.

  Now you want to uninstall Palm Desktop and remove anything that has to do
  with Palm Desktop on your computer. As the folder above, remove the Palm folder. Once this is done, you need to delete some registry keys
  your registry PC operating system.

  Word of warning, go here and removing the wrong thing can cause your PC
  No start, crashing and deleting programs and data. If you feel
  you're not sure of yourself, see if you have a friend who can help you or a
  PC technician that you can pay to help you. This will show them all
  Should be deleted. To keep your current registry settings, we have a backup of the registry.

  On the PC, go to start and run Type "regedit" without the quotes

  Select WORKSTATION, browse to the file--> export. Should appear with a save as
  box. Current place of residence is very well should be in My Documents, or you can change in a location that you will remember. In the file name box, type "Regbackup [todaysdate]" i.e. Regbackup07072008. Then, the most difficult part.

  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. It will ask you, are
  make sure you. Say Yes. Do the same for all the keys below.

  If you make a mistake, stop what you are doing. And call a PC technician.
  BUT do not turn off your computer.

  The reg keys are as follows (Note: some of the theses reg keys won't be here)
  But if they remove them)

  * Installation quick HKEY_CURRENT_USER\Software\U.S. Robotics\Palm
  * Transfer of files Robotics\PalmOne HKEY_CURRENT_USER\Software\U.S.
  * Robotics\Pilot Office of HKEY_CURRENT_USER\Software\U.S.
  * HKEY_CURRENT_USER\Software\Palm
  * HKEY_CURRENT_USER\Software\Palm, Inc.
  * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
  * HKEY_CURRENT_USER\Software\palmOne
  * HKEY_CURRENT_USER\Software\PalmSource
  * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm

  Then restart your computer

  Then, reinstall your Palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before create you a hotsync name.

  Message relates to: Palm i705

• Running message get LabVIEW 2012 Application builder missing media LabVIEW 2013

  I'm doing an installer using LV 2012 (version the most recent for which I have a license - installed from Developer Suite 2013, last disks I have).

  I ask the installer to include run time engine 2012 SP1 f5 - only choice presented to me for a 2012 RTE

  When I Isaiah to compile a Setup program, I get a message asking a LV 2013 multimedia path, which I did not...

  Any ideas on why this is happening or how to work around?

  
  

• LabView Application Builder, FieldPoint-> Programmabsturz beim Aufstarten einer erzeugten EXE-Datei

  Hallo, habe folgendes problem:

  Fur einen Kunden wurde ein Programm zur Datenerfassung developed (2005).

  Die Daten werden über die Fieldpoint-Schnittstelle und einer CSV-Datei abgespeichert erfasst.

  Fur ein Folgeprojekt der Kunde einer Version dieses Programms eine möchte.

  Therefore, one wurde der Application Builder acquired um eine Exe-Datei zu ruler.

  Da ich sonst nichts mit mache LabView ist meine nicht mehr die latest LabView-Version

  Version of LabView 7.1

  Application Builder as LabView 7.1

  FieldPoint Version 4.1

  DAS create einer EXE-Datei war auch been, nur beim EXE der implement auf dem neuen Zielrechner, das Gingold

  Programm beim Aufstarten die application great mit einer Fehlermeldung ab (Fehlerbericht a Microsoft senden...) und one sharp.

  The Rechners green Ereignisanzeige der in diesem Falle immer die message ".NET Runtime 2.0 Error Reporting."

  Typ: Fehler

  Ereignisskennung: 1000

  Warum das Programm ist leider nicht auszumachen absturzt sometimes, der of mit of ich aber dass Schnittstelle schatze

  zu FieldPoint (Version 4.1) hat zu tun.

  Wenn ich das Programm aus meiner Entwicklungsumgebung aus Starte works are properly.

  Testweise habe ich auch schon die Entwickungsumgebung auf dem neuen Zielrechner installed, auch dann so mein Programm wenn ich're manuell von sleeps aus starte. Kann ich beim ruler der Exe-Datei noch was please gemacht haben? Aber warum die EXE-Datei dann ab und zu works?

  Hi ralfn,

  Thank you for the information on Hyperthreading.

  The new PC contains a CPU dualprocessor.

  After deactivation of the screening "will launch several threads" in the LabView software

  (Tools-> Options-> Performance and memory), my EXE file works fine.

  Thank you, best regards,.

  Schnetzi

• Application Builder error

  Hello

  I use LV 8.6 and Application Builder. My Labview vi uses some third party vi to control a linear motor. The vi works well not respected. Can I complie an exe without errors, but when I run the exe, (on the same PC), I get the below error. (Connect.vi is the third party VI used to start communication with the motor). In this case with my vi and vi example of a third. I also have an exe from one of the vi from the engine supplier that works.

  On the error, I don't know why he mentioned NEITHER-488, I've never used (I don't think) so why it causes an error?

  Thank you

  Richard

  

  
  

• the application builder exe file does not work

  Hi all

  I have a usb data acquisition module, it is USB 2408-2AO of MC. I order the module with a VI and it works very well. I used the Application Builder to create an exe of the VI. The exe works great too, but only on my own computer and not on other computers.

  I already made the other screws's exe files and never had any problems to run the exe on other machines. I also tried to do an installation of the VI program and not just a stand-alone application, but once again the final application does not work. The application runs without problem on the target computer, no errors are displayed, but it just does not control the USB module as it should. I think the problem is that the builder Application does not include al screws required in the installation program, particularly MC devices to control the USB device. I tried to manually choose the screws, but it seems that everything is included... I am sure that the problem is the USB device, as I did other exe files and they all work very well (but they do not control the USB device) on other machines. Someone has any idea how to solve the problem?

  
  

• Error - app fails to load (forcefield.exe) error 0xc000034 to start Windows XP.

  Original title: 0cx000034.

  Windows xp pro. all KB (130 or almost). I've stalled zonealarm 9-3-037-000 and is unable to contact the update server. I have this problem at the start of this application fails to load (forcefield.exe) error 0xc000034, press (x) to continue. Za tech has the slightest idea why. Technical support told me to do evervthing, I does not. They never say why I get error at startup. W the dose the average of the error and how to fix

  Hi Ray,

  It seems that ZoneAlarm has not installed correctly.

  I recommend you to uninstall ZoneAlarm completely using the removal tool and check if the problem persists.

  Subsequently, you can re - install software ZoneAlarm .

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Application Builder rejecting app

  I have re-built this cursed application three times now from scratch and it loaded in the Application Builder just to get these errors. We have two subscription app purchaes that correspond to the exact same codes in the application, we created in iTunes Connect.

  I have no idea what I'm doing wrong? So frustrating.

  

  I think that you will need to submit together - as by submitting your IAP and then submit your application.

• Application builder cannot build the exe. Error 8 has occurred in AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi

  I bought a new Dell laptop (Windows 10 Pro) and LV 2015 (32-bit) is installed. I copied my project files and tried to build the exe file and received the error 8. After much searching for an answer, I created a minimal test with just a single white vi project and an exe based build spec to reproduce the error with. Whenever I try to build, I get the same error 8:

  An error occurred during the generation of the application. You don't have the appropriate permissions to create the application at the specified location, or the application is in use.

  Invoke the node in AB_Engine_Build_Method_Wrapper.vi-> AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi-> AB_UI_Frmwk_Build.lvclass:Build.vi-> AB_UI_FRAMEWORK.vi-> AB_Item_OnDoProperties.vi-> AB_Item_OnDoProperties.vi.ProxyCaller
  
  Method name: Build: Application

  Error 8 has occurred to AB_EXE.lvclass:Build.vi-> AB_Build.lvclass:Build_from_Wizard.vi

  Possible reasons:

  LabVIEW: File permission error. You do not have the correct permissions for the file.

  I can't quite imagine I could have permissions issues. I of course have full admin on the machine privileges.

  I've seen other messages (like this one) who speak to have Windows Explorer opened the path of construction when it tries to go up and get this error. I made double sure that I don't have ANY Windows Open Windows Explorer, trying to build. There was a mention in one of the positions which perhaps of LabVIEW in current directory is defined in the file generation, but I'm not quite what that means, or why that might happen when there isn't usually prevents me to build on other machines.

  I tried the procedure described in the KB, but no help.

  Interestingly, I have created a virtual machine (Win 10) for a different project and installed LV 2015 32 bits in the virtual machine, and all my applications build very well in the virtual machine. But on OS from my physical machine, I get this error 8 for all construction applications.

  I tried to fix LabVIEW, and also I tried to uninstall reinstall LabVIEW. Nor was the error to go away completely. After the repair, the project has successfully generated once. But subsequent attempts to build fail with the same error.

  See the attached test project and the build log.

  Thank you

  Nathan Scharfe

  CLD

  My best guess is that some external process is the use of the folder and do not let you write here. The most likely candidates are anti-virus software or a service of indexation of a certain type. I'm guessing that he sometimes managed everything simply because it is a race condition and in these cases, the blocking part yet or is already done.

  You could try the building to a network drive, when these forces are less likely to be able to make the lock or you could try to find a software that shows you what software has handles opened in a folder and control for an offender. I seem to remember that the Process Explorer and SIW show this, but it's far from my area of expertise.

• 1 error in writing on a text - installer with Application Builder file

  I wrote an installer using the Application Builder to install the runtime engine that allows any computer without LabVIEW to run an .exe program. Setup runs and installs engine race and then as a .exe VI. When it is done installing, the .exe VI opens automatically.

  An error appears when the .exe opens and says "1 error in writing to a text file". If the user clicks on the error that it can run the program without problem, it converts file formats in a file .lvm. Automatically, it generates a new file name and saves the file in the same directory, but with a different name.

  Why did it only happen when opening first upward? The program tries to run when it automatically opens? Is there a file path residual left in the program that trys to run first, before that the user put his own file path in the program?

  I am semi new to labVIEW (a few months) and that nothing shows that would create this error at the beginning of the program.

  Thank you

  Hi Scott,.

  Well, you could model a little VI and turn on debugging highlighted to test your idea!

  THINK THE STREAM!

  How a Boolean entry should WAIT for the action of the user? It should be read according to the stream!

  What this small pseudo-code:

  REPEAT
  
    Wait (50ms)
  
  Until the button

  Or how about an event in the user queue structure?

• application builder error.llb

  Hi all

  I use the application builder to compile an executable from my VI. Compilation works without a hitch.

  However, when I try to launch the .exe subvis are missing three of error.llb: not found Dialog.vi, Dialog.vi to view details and the value string Value.vi

  The compiled .exe seems to be looking for these screws in instr.lib, which is not found in the compilation folder.

  This occurs even on my machine for development, on which, of course, the VI works well since in LabView.

  I missed something during the configuration of the compiler?

  Thank you in advance for your help!

  Nico

  I had this before, and it was reported by OR as a bug that just load a project that was built in an old version of LabVIEW and creating an application thereof. For me it was to load a project LV8.5 in 8.6.

  The only solution was to add the three missing from vi to the project and make sure that they are added to the list always included in the application builder.

  You will find these vi NIUninstaller Instruments\LabVIEW 8.x\vi.lib\Utility\error.llb program. Simply add them to your project, somewhere, and then in the application Builder makes sure that select you them as always included in the source files section, and then rebuild your application.

• LV Application Builder: fixed error "the system cannot find the file specified."?

  Hi all

  I don't mind banging my head out of something that feels complex, but it's still frustrating to be baffled by something that seems simple... I have LabVIEW 2014 and Application Builder. I've built a program that works perfectly as a VI, and then compiles and runs without fault as a .exe. But I can't get the installer to work. I get the following error:

  

  The suggestions in this thread and this KB article, I created a new specification to build installer, then a new application build spec, then a new project with all my screws in, build and test setup at each stage. None of this seems to make a difference.

  I ran the installer as an administrator, I created the Advanced installation directories (in which case it does not have the privileges to create folders) and built an installer without the performance in. None of this worked either. Finally, I played a bit with put all my subVIs in a library.

  So I guess it's a quirk in my program from the tutorial worked. Does anyone have any experience or advice on what specific aspects of a piece of Nice program with AB installers? It is a primary VI, less than a dozen, some Type Defs and no material integration subVIs. Seems to be a program fairly simple and straightforward, but maybe something in it is persona non grata with Application Builder?

  Are you running in deep subfolders with long folder names and file names? Perhaps some of the paths are getting too much time managing?

• Application Builder Question: How to get several .exe files in one version?

  I am trying to release a LV 2010 application composed of a high level VI (Main.vi), and a number of dynamically called live contacting one using functional global variables (and a few classic global variables).

  One of the dynamic subVIs (Second.vi) can in fact be used independently of Main.vi (and often will). I wish it were available as a .exe, but I would like to be able to communicate with Main.exe if is started after Second.exe. Is - it somehow possible?

  It seems to me that I must write two screws as independent applications (and release them as such, but in the same folder of the application) and find another way to enable the exchange of data between the two (which, I have no idea). Is there an easier way, I'm missing? The two screws as high level screws in the Build specification will do almost what I want, but not quite, since it in order to open the two screws little important if I want to run only the Main.vi or Second.vi only (and of course only show the single .exe file in the application folder).

  You could do this by using the arguments passed to the exe.  This document gives an example "past of Arguments to a LabVIEW executable".  I just think, you can create shortcuts in the Application Builder, but you will need to generate them buy a post running installation tool.

  Jason

• LabVIEW Application Builder Crash: ntdll.dll module failing

  Hello guys,.

  I am currently having problems during the construction of my project (LV2012 (32 bit), Windows 7). At the end of the application generation, LabVIEW crashes without explanation (screenshot in french, sorry)

  

  Following Windows errors logging:

  Event 1000 Application Error
  
  Faulting application name LabVIEW.exe, version : 12.0.0.4024, time stamp : 0x4fea600e
  Faulting module name : ntdll.dll, version : 6.1.7601.17725, time stamp : 0x4ec49b8f
  Exception code : 0xc0000374
  Fault offset : 0x000ce6c3
  Faulting process id : 0x16fc
  Faulting application start time : 0x01cda5350f41f87c
  Faulting application path : C:\Program Files (x86)\National Instruments\LabVIEW 2012\LabVIEW.exe
  Faulting module path: C:\Windows\SysWOW64\ntdll.dll
  Report Id : 8e5b1344-1128-11e2-97d8-c0f8dae81bad
  

  I had the same problem on LabVIEW 2011. I tried to create my application with another computer (also LV2012 32-bit) and Windows 7 64 bit and I have no error.

  What is the problem with my computer?

  For french, french subject people

  Thank you for your help,

  Kind regards

  Quentin

  Solution found:

  -Uninstall all products of OR

  -The keys to clear registry associated with LabVIEW

  -Remove the directory of National Instruments in Application Data

  -Reinstall LabVIEW

• application spoolsv.exe error.

  I have windows xp and I get the application spoolsv.exe error. It gives me the following message is displayed: the Instruction at 0x01fb0374 referenced memory at 0x1fed12c0 memory cannot be read. "I don't know what to do about this.  Help, please.  * E-mail address is removed from the privacy *

  Hello

  1 did you change on your computer?

  2. what service pack is installed on your computer?

  3. when exactly did you receive this error message?

  4. What is the brand and the number of the printer model do you use?

  Method 1:

  I suggest you try the steps suggested by Anthony - Support Engineer from the below mentioned link and check if it helps. These steps are for Windows Vista and should work as well on Windows XP.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/spoolsvexe-application-error/0a7b0b15-77b3-4a8f-9465-dff8517c226e

  Method 2:

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information on how to to back up and restore the registry,

  Method 3:

  I also suggest you to follow the link and check.

  Resources for the resolution of the printer in Windows XP problems

  http://support.Microsoft.com/kb/308028

  See also:

  How to cancel printing or to delete a print job that is stuck in the print queue in Windows XP

  http://support.Microsoft.com/GP/pc_print_methoddstoptheprin

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows