application spoolsv.exe error.

Similar Questions

• Failed Application spoolsv.exe version 5.2.3790.4759 failed module ntdll.dll version 5.2.3790.4789

  I have several printers installed Windows 2003 Standard Edition Server. Canon and HP. I noticed when I remote through Windows Remote Desktop my spooler is down and in the event viewer, I saw the following message

  Failed application spoolsv.exe
  version 5.2.3790.4759
  module failed Ntdll.dll
  version 53233790.4789
  failing address 0x0002a5a4

  Hi BDain,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads

• c:\windows\sustem32\spoolsv.exe error application requested to terminate in an unusual way.

  original title: c:\windows\sustem32\spoolsv.exe

  I received the message above, he stated that this application has requested the execution to terminate in an unusual way. How can I fix it?   Thank you

  He also had this end microsoft c++ runtime library.

  Hi Jmarl,

  ·         What version of windows is installed on your computer?

  ·         Did you do changes on the computer before the show?

  Follow the steps below:

  Method 1: If the problem is caused by the lack of Visual C++ libraries, you can download and install the Runtime components of Visual C++ libraries from the following links:

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  http://www.Microsoft.com/download/en/details.aspx?ID=5555

   

  Package redistributable Microsoft Visual C++ 2010 (x 64)

  http://www.Microsoft.com/download/en/details.aspx?ID=14632

   

  Method 2: Start the computer in a clean boot state and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  I hope this helps.

• Failed application spoolsv.exe, failed module MSVCR80.dll,

  In fact I have a 32-bit windows server 2008 with HP, epson, xerox, datamax printers, I use the

  XEROX GPD PCL v.2.1.

  PC HP of IMPRESSION UNIVERSAL v. 5.5.0

  IBM PROPRINTER XL III

  ZDESIGNER z4 M 300 dpi

  I had no problem to install and configure printers, but the print statement service currently, although it starts and stops the service but not for a minute, then stops again the file.

  WER of the report:

  ersion = 1
  EventType = BEX
  EventTime = 129877854464650233
  ReportType = 2
  Consent = 1
  Response.Type = 4
  SIG [0]. Name = name of the Application
  SIG [0]. Value = spoolsv.exe
  GIS [1]. Name = Version of the Application
  GIS [1]. Value = 6.0.6001.18511
  GIS [2]. Name = timestamp of the Application
  GIS [2]. Value = 4c6a8f6f
  GIS [3]. Name = name of the Module fault
  GIS [3]. Value = MSVCR80.dll
  GIS [4]. Name = Fault Module Version
  GIS [4]. Value = 8.0.50727.4053
  GIS [5]. Name = Fault Module Timestamp
  GIS [5]. Value = 4a594c79
  GIS [6]. Name = offset of the Exception
  GIS [6]. Value = 000489bc
  GIS [7]. Name = Exception Code
  GIS [7]. Value = c000000d
  SIG [8]. Name = data exception
  SIG [8]. Value = 00000000
  DynamicSig [1]. Name = OS Version
  DynamicSig [1]. Value=6.0.6001.2.1.0.272.7
  DynamicSig [2]. Name = locale ID
  DynamicSig [2]. Value = 2058
  DynamicSig [22]. Name = additional Information 1
  DynamicSig [22]. Value = a388
  DynamicSig [23]. Name = additional Information 2
  DynamicSig [23]. Value = cb1346f285b14b60ce06bcb7640ef607
  DynamicSig [24]. Name = additional Information 3
  DynamicSig [24]. Value = 0a3d
  DynamicSig [25]. Name = additional Information 4
  DynamicSig [25]. Value = 8b78dfd228a082ef66e811c9fe587da1
  UI[2]=C:\Windows\System32\spoolsv.exe
  UI [5] = check online for a solution (recommended)
  UI [6] = check for a solution later (recommended)
  UI [7] = close
  UI [8] = Spooler SubSystem App stopped working and was closed
  UI [9] = a problem caused the application to stop working correctly. Windows will notify you if a solution is available.
  UI [10] = & close
  File [0]. CabName = Version.txt
  File [0]. Path = WERF88F.tmp.version.txt
  File [0]. Flags = 65538
  File [0]. Type = 5
  File [1]. CabName = AppCompat.txt
  File [1]. Path = WERF890.tmp.AppCompat.txt
  File [1]. Flags = 65538
  File [1]. Type = 5
  File [2]. CabName = memory.hdmp
  File [2]. Path = WERF8B1.tmp.HDMP
  File [2]. Flags = 2097152
  File [2]. Type = 3
  File [3]. CabName = minidump.mdmp
  File [3]. Path = WER218.tmp.mdmp
  File [3]. Flags = 2162690
  File [3]. Type = 2
  FriendlyEventName = Stopped Working
  ConsentKey = BEX
  AppName = Spooler SubSystem App
  AppPath=C:\Windows\System32\spoolsv.exe

  In fact the temporal solution is clear [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Environments\Windows NT x86\Drivers\Version-3]

  o 'Repertoire' = '3 '.

  o "MajorVersion" = dword:00000003

  o "MinorVersion" = DWORD: 00000000

  Start a stop print spooler services, nerating entered and start the print spooler

  who can be the cause of this behavior?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. You can follow the link to your question:

  General Forum(Windows Server) Technet

  Hope this information helps.

• application wmplayer.exe error

  When I try to open any video file, I get an error meassage. It is said: wmplayer.exe - Application error. The instruction at "0x603518b" referenced memory at "0x603518b". The memory could not be 'read'.

  Anyone know what this means and how can I solve this problem?  I have uninstalles the MediaPlayer 11 & reinstalled but still the same problem.

  Please help me.

  More *. dll errors are caused by incorrect or damaged Windows registry entries. Programs that remove completely all entries when uninstalled, *.dll entry is corrupt, or adware, spyware, malware or a virus can cause an error *.dll. You can find what *.dll errors are waiting to pop up on your computer.
  General speaking, try a repair tool is not a bad way to correct the error. If I were you, I will set my error with a repair exe too because it is fast and efficient. In dll - .net error, you can download for free. dll repair tool to easily fix dll errors and speed up computer. You can just try.

• (Redirected) Faced with an Application Restore7.exe error

  during the restore computer dell laptop inspiron 1545 to its original Installation factory with Dell DataSafe Local Backup 2.0 "in the face of an application error which is restore7.exe. Please guide me how to solve.

  Please this post in the portable computer forum for faster assistance.

  http://en.community.Dell.com/support-forums/laptop/

• Lexmark X 1130 gives me this error at the launch of the application: Application LXBKaiox.exe error.

  1. Lexmark X 1130 gives me this error at the launch of the application: error LXBKaiox.exe - Application, the application could not start correctly (0xc000007b). Click OK to close the application.
  2. What can I do?

  It is perhaps because Lexmark have not released a driver for Windows 7 for this printer:-

  http://support.Lexmark.com/index?ProductCode=LEXMARK_X1130&page=product&locale=en&UserLocale=en_AU#1

  There is a work around: -.

  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/a8cf7720-3259-4baf-b9dc-12c2d3ba9b19

  The printer still works under Windows 7, or you have just tried to install it?

• When I go to find the help I get of a help of application ctr.exe error message in windows xp

  Don't let me access antivirus protection

  Hi Billy,

  1 have you made changes to your computer recently?

  2. are - what you are talking about assistance by using Windows?

  3. what anti-virus is installed on your computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: Scan your computer using Microsoft Safety Scanner in safe mode with networking and check if that helps.

  Microsoft safety scanner

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  To use a safe mode with network option, follow these steps:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) use the arrow keys to choose Safe mode with networking in the Windows Advanced Options menu appears, and press ENTER.

  Method 2: run System File Checker and check if it helps.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

• When booting Vista, get visual c++ run time error c/wdo/sys32/spoolsv.exe error

  I got this error when I boot.  How should I do?  thanx

  Hi DanielValascho,

  ·         Did you the latest changes on the computer?

  I suggest you perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startupmode.

• On startup, I get the following error: spoolsv.exe - Application error

  On startup, I get the following error:
  Spoolsv.exe - Application error
  The instruction at "0 x 10002837" referenced memory at "0x00000000".  The memory could not be "written".

  Then the print subsystem stops.  Windows update service keeps control and verification.  I let go 20 hours and it is never resolved.  I can't open some applications requiring printers.  Help please.

  Bill

  Hello DragonBill,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Regarding your question, the most common cause of the error is an abundance of. SHD and. Files in the directory of spool SPL.  These files are created by the spooler to save data delayed a print job.  The. SPL file contains the drawing commands and the. SHD file contains information of working parameters the print job.

  To try to correct the application spoolsv.exe error, you must remove these files from the system.  To do this, perform the following steps on your Windows Vista computer:

  1. open the Control Panel, select Classic view, select Administrative Tools and then select Services .

  2. in the Services management console, find the Spooler service, right-click on it and select stop.

  3. then open the folder C:\Windows\System32\Spool\Printers .  (Here, we assume that your Windows is installed in the default C:\Windows folder)

  4. delete all the . SHD and SPL files in this folder.

  5. then open the TMP folder and delete all the old, unused files in this folder.

  6. Finally, restart the spooler from the Services management console service.

  Important note: If you are unable to delete the files in Normal Mode, then you may have to restart your computer in Mode safe to delete files.  To start your PC in safe mode, press F8 when the system restarts, and then select the Mode option safe mode from the Windows Advanced Options Menu.

  If deleting the files do not straighten out the problem, you must perform a system restore and restore your system to the times before when the error started appearing on your computer.  A.m. run the restoration of the system, open Start, all programs, Accessories, System Tools , and then select the System restore option.  On the Welcome to system restore screen, select the restore my computer to a time option earlier and select Next.  In the Select Restore Point screen, select the date that represents the restore point to which you want to restore your computer back, and then select Next.  Finally, check and then click Next again to confirm your restore point and restore of the system.  Restart your computer when you are prompted, and then press OK to close the end of System Restore screen.

  It is important that you know that application errors can also occur because of virus or spyware infections.  In fact, the Spoolsv.exe process is also a known backdoor vulnerability which can be planted on your computer for malicious purposes by an attacker.  Therefore, if you see an unknown process running on your system, you must take appropriate measures to remove them.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Schedule for the opening of the application on Tungsten E Palm.Exe error

  I have a Tungsten E (no disc of original material) which was working fine until yesterday. I can't open my calendar, even though I can open all the rest and receive an application Palm.Exe error. "The Exception integer division by zero".

  "(Oxc0000094) occurred in the application at location Ox67cz6F22. When I try to send the error message, it freezes all the Palm application. -Without the installation discs original can I do? Delete the files from my hard drive (and if so, which ones) and then re - sync? Instructions are appreciated.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/TUNGSTENE/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  There is a link on this page for Palm desktop that you can download.

  Here are the instructions for XP to uninstall "own."

  You should first make a copy of your data to have just in case something
  is happening. You can find your data files by going to C:\Program Files\Palm or
  A Palm. Highlight your Palm Desktop user name and right click and copy.
  Then, go to the desktop of your PC, right-click on a blank spot block and select.

  Now you want to uninstall Palm Desktop and remove anything that has to do
  with Palm Desktop on your computer. As the folder above, remove the Palm folder. Once this is done, you need to delete some registry keys
  your registry PC operating system.

  Word of warning, go here and removing the wrong thing can cause your PC
  No start, crashing and deleting programs and data. If you feel
  you're not sure of yourself, see if you have a friend who can help you or a
  PC technician that you can pay to help you. This will show them all
  Should be deleted. To keep your current registry settings, we have a backup of the registry.

  On the PC, go to start and run Type "regedit" without the quotes

  Select WORKSTATION, browse to the file--> export. Should appear with a save as
  box. Current place of residence is very well should be in My Documents, or you can change in a location that you will remember. In the file name box, type "Regbackup [todaysdate]" i.e. Regbackup07072008. Then, the most difficult part.

  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. It will ask you, are
  make sure you. Say Yes. Do the same for all the keys below.

  If you make a mistake, stop what you are doing. And call a PC technician.
  BUT do not turn off your computer.

  The reg keys are as follows (Note: some of the theses reg keys won't be here)
  But if they remove them)

  * Installation quick HKEY_CURRENT_USER\Software\U.S. Robotics\Palm
  * Transfer of files Robotics\PalmOne HKEY_CURRENT_USER\Software\U.S.
  * Robotics\Pilot Office of HKEY_CURRENT_USER\Software\U.S.
  * HKEY_CURRENT_USER\Software\Palm
  * HKEY_CURRENT_USER\Software\Palm, Inc.
  * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
  * HKEY_CURRENT_USER\Software\palmOne
  * HKEY_CURRENT_USER\Software\PalmSource
  * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm

  Then restart your computer

  Then, reinstall your Palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before create you a hotsync name.

  Message relates to: Palm i705

• application HPLaserJetService.exe

  After a successful printer install firmware upgrade and I now get an application HPLaserJetService. exe error and unable to connect to the HP Toolbox.  The application of the SPHP found no error and the printer works fine on my connection USB and Airprint but the HP module hppccompio.dll has an application error.

  It seems other people have this problem but I don't know how to fix it.  Some advice would be very grateful.

  Hi gallagtj,

  Run the firmware update and then uninstall the printer. Restart the computer and reinstall the printer using lsecond link below.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-86473-8 & CC = US & DLC = in & LC = on & os = 228 & Product = 4052980 & sw_lang =

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=LJ-86470-3 & CC = US & DLC = in & LC = on & os = 228 & Product = 4052980 & sw_lang =

• AccelerometerSt.exe error on the computer Windows 10 brand new

  I have the same problem that many others have with the Application AccelerometerSt.exe error.   BUT, I have a brand new - 1 week old computer and it came with 10 windows already on it.  I have the HP Envy x 360.   How do you intend that to solve the problem.   If you uninstall and reinstall Windows 10, I'll need much more detailed information.   I don't know how to do this - which was the reason why I only watched computers with her already preinstalled.

  Hello

  Try the following.

  Open windows control panel, open programs and features, make a right click the entry for HP 3D DriveGuard and select uninstall.

  When this has completed, restart the laptop.

  When windows has reloaded, download and install the version of DriveGuard on the following link.

  http://ftp.HP.com/pub/SoftPaq/sp67001-67500/sp67280.exe

  Kind regards

  DP - K

• AcroRD32.exe error

  Whenever I go to open a PDF file to read it I get an AcroRD32.exe error that says unknown software exception (0 x 4000015) appeared terninate click Ok.  This closes the document so I can't read it or print it.

  Hello

  You can view the following link once and see if that fixes the problem.

  Acrobat.exe, Acrord32.exe exit | Close browser. Windows

  You can also check the following thread and perform the steps mentioned.

  Application AcroRd32.exe error

  Let us know how it goes.

  Concerning

  Sukrit diallo

• Spoolsv.exe Application error

  May be it some please tell me what means this error:

  Spoolsv.exe Application error:

  The instruction at "0x01fd167c" referenced memory at "0x00000020. The memory could not be read.