Application.invokeLater () and event queue size limit

Similar Questions

• Parsing XHTML and byte array size limit

  Hello

  I would like to analyze incoming e-mails on the device to retrieve information. The email format is XHTML and I use a sax parser to extract data (API version 4.2.1).

  InputStream is = new ByteArrayInputStream(xhtml.getBytes(encoding));
  _document = docBuilder.parse(is);
  

  It works fine, but it seems there is a limit of size on arrays of bytes (max count = 1999) because I had an "unexpected end of file exception" when my string is too long.

  Does anyone know how to overcome this size limit?

  Kind regards

  Stone

  By default, I think that just the first 2K of a value of data associated with an email is delivered to the device.  You need to ask for more to get the rest, I think.  Could it be the problem?  Take a look in the knowledge base for articles on this subject, I do not remember having seen that addressed this and describes how to get the remaining data.

• ISE v1.4: "WARNING: Profiler Queue size limit is reached.

  Hi all

  We have improved our nodes 10 v1.2.1 Patch v1.4 ISE 6 weekends. Since then, we have been doing the above alarm message very frequently (often every five minutes) and it's really annoying.

  Six of the ten nodes have the character of PSN and they seem not to be under any large load (less than 10,000 active endpoint points shared between them) and the readings of CPU and memory and latency are all very low.

  I wonder if I ran into the following Cisco Bug:

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCuw93839

  Unfortunately, Cisco provide little information on the bug above, I can't be sure.

  Has anyone encountered this?

  Thank you.

  rgrds,

  Inayat

  I think that maybe it's actually the following problem

  CSCuy20317 Error "profile tail limit reached" in the patch 1.3/4 5 +.

  If that is the question, the good news is that 1.4 patch 7 has been posted and includes a fix for this problem

  Curious to know how you go

• Custom fonts: min and max maximum size on the font file?

  Hello

  What is the limit of file size (max and min) on the font file for loading custom fonts?

  I have search the Forum and found a comment by Peter_strange.

  "The documentation says 60 K or 90K depending on how load you, 90 K if you load a an InputStream memory."

  But I want to be sure, share please if someone has the info.

  Thank you.

  Pradeep thanks for your clarification.

  Now, I checked that there is no limit of min file size and maximum file size limit is 90 KB for load of cases and 60 KB in case of direct load flow.

  I also have a resource good sample by peter_strange -.

  http://supportforums.BlackBerry.com/T5/Java-development/font-loader-Manager-utility/m-p/592647#M1223...

• use the queue and event to read data from two series mean

  Hi all

  I'm reading the data of two serial port using QUEUE AND EVENT but not sccusess. can someone help me?

  I use LABVIEW 2011.

  att my project.

  regrads.

  You stop the second for loop using cluster of error which means that your upper and lower loop stops when you press exit but not the one in the middle. In theory, you should send a queue for loops below when you press the exit button and also make sure that you shoot hunting all queues before closing everything.

• Application.invokeLater (Runnable) in Focus event handlers

  Several code examples use Application.invokeLater (Runnable) in onFocus and onUnfocus methods:

  protected void onUnfocus() {}

  -For example, a user rolling the trackball / slips the trackpad and the system decides that it is time to activate another area.  At this point, the system checks and invokes all sorts of methods - one of them is Field.removeFocus () that must call onUnfocus() in this area. If unUnfocus() is called when the system is not yet completed this transfer of focus. It might not be all-terrain with focus, just a 'right' to receive the focus.

  Or take the case when a new screen is pushed. This new screen has not been painted yet, the system has not yet checked if she has any field focusable, etc. - but your onUnfocus() is already known. Is it not strange that you'd better to be careful and annex an action after the dust has settled offshore?

• Job queue and event ADVANCE.

  Hello

  I'm getting to do advanced queues work which could be removed by the use of event in function. For a single message, it seems to work but if I queue of messages more some of them are 'lost' without having been processed. In below code I create job scheduler queue and event. Then I enqueue messages 3 - two immediately after each other and third with 5 delay. Only the first and the third message are processed (and written to the TST_DATA table). In the queue table, it seems all messaged have been processed. RDBMS version is 12.1.0.2.

  Thanks for any response.

  CREATE TABLE TST_DATA (
    sCommand VARCHAR2(50)
  );
  
  CREATE TYPE TST_PAYLOAD_T AS OBJECT (
  sCommand VARCHAR2(50)
  );
  /
  
  CREATE OR REPLACE PROCEDURE processMessage(
    itMsg TST_PAYLOAD_T
  ) IS
  BEGIN
    INSERT INTO TST_DATA (sCommand) VALUES (itMsg.sCommand);
    COMMIT;
  END;
  /
  
  BEGIN
      dbms_aqadm.create_queue_table(
        queue_table => 'TST_QUEUE_TAB',
        queue_payload_type => 'TST_PAYLOAD_T',
        multiple_consumers => TRUE
      );
  
      dbms_aqadm.create_queue(
        queue_name => 'TST_QUEUE',
        queue_table => 'TST_QUEUE_TAB'
      );
  
      dbms_scheduler.create_program(
        program_name => 'TST_PROG',
        program_type => 'STORED_PROCEDURE',
        program_action => 'processMessage',
        number_of_arguments => 1,
        enabled => FALSE
      );
  
      dbms_scheduler.define_metadata_argument(
        program_name => 'TST_PROG',
        metadata_attribute => 'EVENT_MESSAGE',
        argument_position => 1
      );
      dbms_scheduler.enable('TST_PROG');
  
      dbms_scheduler.create_job(
        job_name => 'TST_JOB',
        program_name => 'TST_PROG',
        queue_spec => 'TST_QUEUE',
        enabled => FALSE
      );
      dbms_scheduler.enable('TST_JOB');
  
      dbms_aqadm.start_queue('TST_QUEUE');
  END;
  /
  
  DECLARE
    ltMsg TST_PAYLOAD_T;
    ltEnqueueOptions dbms_aq.enqueue_options_t;
    ltMsgProperties dbms_aq.message_properties_t;
    lrMsgId RAW(16);
  BEGIN
    ltEnqueueOptions.visibility := dbms_aq.IMMEDIATE;
    ltMsg := TST_PAYLOAD_T('test1');
    dbms_aq.enqueue(
      queue_name => 'TST_QUEUE',
      enqueue_options => ltEnqueueOptions,
      message_properties => ltMsgProperties,
      payload => ltMsg,
      msgid => lrMsgId
    );
    ltMsg := TST_PAYLOAD_T('test2');
    dbms_aq.enqueue(
      queue_name => 'TST_QUEUE',
      enqueue_options => ltEnqueueOptions,
      message_properties => ltMsgProperties,
      payload => ltMsg,
      msgid => lrMsgId
    );
    dbms_lock.sleep(5);
    ltMsg := TST_PAYLOAD_T('test3');
    dbms_aq.enqueue(
      queue_name => 'TST_QUEUE',
      enqueue_options => ltEnqueueOptions,
      message_properties => ltMsgProperties,
      payload => ltMsg,
      msgid => lrMsgId
    );
  END;
  /
  
  SELECT * FROM TST_DATA;
  

  Hello

  you're right: after two immediate queue operations and a separate queue there are only two lines in the table

  (tested on 11.2.0.4):

  SQL> select * from tst_data;
  
  SCOMMAND
  --------------------------------------------------
  test1
  test3
  

  If you wait just 1 sec after each DBMS_ENQUEUE there are 3 rows.

  Even with a visibility using DBMS_AQ.COMMIT and COMMIT after that each line there are only 2 rows.

  This mechanism using DBMS_SCHEDULER and EVENT_MESSAGE functionality seems to be a bit slow.

  You must specify the option parallel instance for your business:

  DBMS_SCHEDULER.set_attribute ('TST_JOB', 'parallel_instances', TRUE);
  

  You will get then 3 rows, even without a delay of sleep:

  SQL> select * from tst_data;
  
  SCOMMAND
  -----------------------------
  test1
  test2
  test3
  

  Kind regards

  WoG

• WARNING: table size limit exceeded

  Noticed this error on a sensor event. I had the same as those of the 5378-0,5488-0,5528-0,5476-0.5557-0,5687-0,5524-0 sigs.

  What it means?

  evError: eventId = 1130169990404666072 = severity = WARNING Cisco vendor

  Author:

  hostId: 02-evlan-c7

  appName: sensorApp

  appInstanceId: 355

  time: December 1, 2005 19:10:08 UTC offset-360 = timeZone = GMT-06:00

  errorMessage: warning Table size limit exceeded by GIS 5378.0. Additional table will be created. name = errUnclassified

  These warnings are initially simply information and do not constitute an error that the user needs to worry.

  When signatures are added to the sensor, the sensor will compile all signatures in a large regular expression cache table. This considerably speeds up the analysis. The cache table, however, has a limited size. When you add a signature to the cache table would develop the table beyond the allowed size, then you will see the warning that you posted above.

  That caveat lets you know, it's that he couldn't add that signature to the existing table, and so it must create a new table for the signature and the signatures follow.

  This information before debugging for developers of signature just so they can track what is happening because signatures are added.

  The sensor works correctly and work very well. The addition of the new table only adds a very small performance reduction as an extra table must be analyzed during the analysis of the packets.

  Users running with the signature by default settings would never need to worry about this message and can consider only a few logging information (it should really have been a status message instead of an error message)

  Users who are unretiring signatures or creating their own custom signatures can see this message as they set up their sensors. So then he os to let them know that tables additional cache is taken to be created to manage the additional signatures. Once more just information and not a real error.

• Size limit of the mailbox Surface RT for Windows?

  Is there a size limit of the mailbox for the mail application that comes with the Windows Surface of RT?  I want to put the ' email new download ' affecting 'anytime' but my Office 365 mailboxes is 4 GB and feared this may interrupt the Windows RT mailbox.

  Hello APLevitt,

  Thank you for the question!

  I'm sorry to know that have problems you with Windows mail app. As I understand it, you need to know what is the size limit of the mailbox.

  There is no size limit for the mail application, the size depends on the availability of hard disk space. The limit also applies with regard to the e-mail services provider, in your case its office 365 with 4 GB of space. If space on the server is full the mail app will inevitably stop receive emails too.

  Answer to us if you are experiencing problems with the mail application or any other problem of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Tasks and events in vCenter logs

  Hey,.

  Recently encountered a problem where someone has configured a vCenter server to use a MS SQL express 2005 database, and the DB hit the size limit of 4 GB for vCenter wouldn't start. In order to make things to start working again, I deleted some data old tasks and events in the tables VPX_EVENT, VPX_TASK and VPX_EVENT_ARG. However, I prefer not to have to do it and to wait for a problem like this from happening again. I know that you can set the time of retetnion records statistics and perf, but you can do the same for the event data and the task? After removing the records I had more than 3 GB of free space in the database.

  Any advice much appreciated

  Unfortunately in the vCenter 2.5 line, there is no automatic size.  In vCenter 4.0 (once it is out), there is a retention settings task and events you can follow events for x amount of time.

  What kind of events seem to be completing the tables?

  See you soon,.

  / Jon

• Problem reading and event registration

  I made a request of CEP to record and events in reading with the following components:
  1. inlet adapter:
  
  Assembly entry
  < wlevs: adapt id = "csvgenAdapter" provider = "csvgen" >
  < wlevs:listener ref = 'channel' / >
  < wlevs:instance - name of the property = 'port' value = "9013" / >
  < wlevs:instance - name of property = "eventTypeName' value ="EmployeeEvent"/ >
  < wlevs:instance - property name = "eventPropertyNames" value = "name, age, place of birth" / >
  < / wlevs: adjust >
  
  config entry
  <>adapter
  < name > csvgenAdapter < / name >
  < record-settings >
  < the dataset name > recplay_sample < / dataset-name >
  < list type event >
  SimpleEvent <-event type > < / type of event >
  < / list-type-event >
  < provider name > - test-RDBMS-provider < / provider-name >
  > size of lots < 1 < / batch size >
  < batch time out > 10 < / batch time out >
  < / record-settings >
  < / adapter >
  2. a channel:
  
  Assembly entry
  < wlevs: channel id = 'string' - type event 'EmployeeEvent' = >
  
  config entry
  channel < name > < / name >
  < reading settings >
  < the dataset name > recplay_sample < / dataset-name >
  < list type event >
  SimpleEvent <-event type > < / type of event >
  < / list-type-event >
  < provider name > - test-RDBMS-provider < / provider-name >
  < / reading-settings >
  < / channel >
  
  3. an eventbean
  4. an adpater pub.
  config entry
  < http-pub-sub-adapter >
  adapter < name > < / name >
  
  < path-context-Server > / pubsub < / server-context-path >
  < channel > / channel 1 < / channel >
  wlevs < user > < / user >
  password <>wlevs < / password >
  
  < / http-pub-sub-adapter >
  
  Config.xml file server entry:
  
  > data source <
  < name > DataSource_test < / name >
  < connection-pool-params >
  > capacity initial < 1 < / capacity >
  > capacity max 10 < < / capacity max >
  < / connection-pool-params >
  < driver-params >
  < url > JDBC: thin: pallavi / [email protected]:1521:XE < / url >
  < driver name > - oracle.jdbc.driver.OracleDriver < / driver name >
  Properties of <>
  < item >
  < name > inventory < / name >
  < value > XE < / value >
  < / item >
  < item >
  < name > create < / name >
  < value > true < / value >
  < / item >
  < / properties >
  < / pilot-params >
  
  < / data source >
  < RDBMS-store-event provider >
  < name > test-RDBMS-provider < / name >
  DataSource_test < data-source-name > < / data-source-name >
  < / RDBMS-event-store-provider >
  
  But while deploying the application we get error like:
  
  
  < the context of the "eventBean" application could not be started: org.springframework.beans.factory.BeanCreationException: error creating bean with name 'csvgenAdapter': cannot resolve the reference to bean 'channel' when setting bean property "listeners" with the [0] key. nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'channel': calling the init method failed; nested exception is java.lang.RuntimeException: invalid event type SimpleEvent
  org.springframework.beans.factory.BeanCreationException: error creating bean with name 'csvgenAdapter': cannot resolve the reference to bean 'channel' when setting bean property "listeners" with the [0] key. nested exception is org.springframework.beans.factory.BeanCreationException: error creating bean with name 'channel': calling the init method failed; nested exception is java.lang.RuntimeException: invalid event type SimpleEvent
  
  Published by: 856272 on August 18, 2011 07:44

  Is this pubsub adapter an adapter http-pub? Then you need your event beans implement StreamSource. Here is an example of code for this:

  / public class SimpleEventBean implements StreamSink, StreamSource {}
  private StreamSender sender;

  {} public void setEventSender (s StreamSender)
  sender s =
  }

  public void onInsertEvent (Object e) {}
  If (sender! = null) {}
  sender.sendInsertEvent (e)
  }

  }

  }

  In addition, you must define the event as bean rather than . and add the adapter http-pub as it is listener.

  Published by: Junger He August 19, 2011 12:27 AM

• Calendar in El Capitan can launch applications as scheduled events... No work around?

  After upgrading to El Capitan of Lion (10.7.5) - I jumped over the Mountain Lion, the Mavericks and the Yosemite - now I'm missing a very important feature in the new calendar (iCal formally): it cannot launch applications such as events scheduled at set intervals.

  I also absolutely do not remove the possibility that it is me who is a bad thing.

  In some other forums people suggest to uncheck calendars in iCloud settings and then create a local calendar (and name it for example "on my Mac") who should be able to launch applications and then synchronize the calendars in iCloud again.

  Unfortunately, as soon as I uncheck calendars in iCloud, the application calendar itself does not create new calendars at all - local or not.

  I'm doing something wrong? If not, is there perhaps a workaround?

  Any help will be greatly appreciated!

  Use Automator to create a calendar alarm clock that would launch the applications.

  When you open the automate, create a new Document.

  Choose the type of alarm calendar.

  Stretching the library of utilities in an action to launch the Application. Set this to the application you want to run.

  Save it and it will create a local calendar with an event in its operation this alarm clock calendar. You can then handle this event.

• Action cam AS30 files 3.98 GB size limit files?

  I formatted my card SDXC 64 GB exFAT, but for some reason, all of the recorded videos to divide at least 4 GB. If anyone know why, or is occurring or if this is normal? Thank you.

  the reason for the file size limit is because the card is formatted as FAT32 and the maximum file size is 4 GB if you use FAT32 formatting. nothing to do with something else

• The Shutdown() call causes a StartExecution and event EndExecution

  When my application ends, he calls the following my recall of closing the form code:

  If (this.axApplicationMgr.Shutdown () is false)

  {

  e.Cancel = true;

  }

  on the other

  {

  ...

  }

  But before the ExitApplication event occurs, a StartExecution and event EndExecution occur.  Whence these extrinsic events and how can I get rid of them?

  It's normal.

• Too much Mouse Move event queues events

  I have a VI that I want to be able to move the scroll bar and then update the graphic cursor position corresponding as I do on different orders.  I meet a problem after removal of the scroll bar on a thumb, where he seems to be pulled and give too much mouse move events and it failures of the program.  Any ideas on how to avoid this an average mouse move samples of the event or something?

  Without looking at your code (do not have LV12 on this machine) I'll take a wild guess that you have locked the façade on the mouse move event.  Try to uncheck it and see if that helps.  Phase II should be faking a loss event queue, but usually, I don't have to do unless I do something really slow in response to an event.