problem fixing KB974431 update

Similar Questions

• FixIt to solve problems but still updates will not be installed

  I tried several times to install the critical updates, nothing helps. I also tried to use the FixIt on several occasions. Still, it detects and solves problems, but the updates always fail to install.
  Help would be appreciated.

  Product Update Status Date Source

  Windows XP Security Update for Microsoft .NET Framework 1.1 SP1 on Windows XP, Windows Vista and Windows Server 2008 x 86 (KB2656353) Sunday, February 19, 2012 Microsoft Update Windows XP Update security for Windows XP (KB2661637) Sunday, February 19, 2012 Microsoft Update SQL Server 2005 Microsoft SQL Server 2005 Express Edition Service Pack 4 (KB2463332) Sunday, February 19, 2012 Microsoft Update Windows XP Update security for Windows XP (KB2660465) Sunday, February 19, 2012 Microsoft Update Windows XP A security update cumulative for Internet Explorer 8 for Windows XP (KB2647516) Sunday, February 19, 2012 Microsoft Update

  Hello

  
  You get an error code when the Windows updates fail?
  
  Perform the steps in the article mentioned below and check if the problem persists.

  http://support.Microsoft.com/kb/822798

  Hope this information helps.

• Windows Update common problem/fix error/no answer

  recurring problem of windows update does not update its program, which leads to no automatic update works correctly.

  jetroam,
  Take a look at these articles and after return.

  What to post in the Windows Update forum

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems after Windows Update on Vista wireless

  It seems that other people have a similar problem, but I'll post this new...
  I've been running Windows Vista Ultimate on my Toshiba laptop for years without any problems.  Earlier this year, I started seeing issues after Windows updates.  The main problem is that after updates Windows, my wireless network is is more noticed and the wireless card (which was installed on the computer, and never had problems before) is not recognized.  I manually installed updated drivers with no luck.  The only thing that has worked is to do a system restore to a point before the updates.  The problem seems to be related to an update in general, I can't uninstall.

  I find it extremely ironic that I have no problems with Vista until Windows 7 is launched. First of all, it's the wireless card, then a problem with a driver graphics card (apparently... which seems to be fixed now) and return to the wireless card.  Should I expect to continue to have problems unless I upgrade to Windows 7?  I can't continue to spend half of my day trying to fix my computer after an update that is supposed to fix the errors, but I don't like the feeling that I am forced to upgrade.

  Hi dabaum77,

  From your post, it seems that the issue was occurring when Windows updates are installed automatically again even after the restoration of the system and that is why I suggest to restore the system again to a point before the updates and download and install Windows updates manually.

   

  Access the link below

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
   
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Follow these steps to disable the automatic updates:

   

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. in the left pane, click on change settings.

  3. under important updates, choose the option you want.

  4. under recommended updates, select the Give me recommended updates the same way I receive important updates check box, and then click OK. Need administrator permission if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  
  Reference:
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  
  Install the updates one by one and check the update is causing the problem to occur. If the problem persists due to a particular update, repeat the process and refrain from settling the problem causing the update to.

  
  You can also check the update problem in Windows Update history.

   

  Follow the steps to check which day caused the issue:
   
  1. open the control panel (all items view), and click the Windows Update icon.
     
  2. click on the link to view update history.
    
  3. to view the details of a single Windows Update-
  (A) select and right-click on a Windows Update list, and then click details.
  
  (B) click on close when finished.
   
   
  You can also uninstall the update that is causing the problem to occur, although it is not recommended.
   
  1. to uninstall a Windows Update, you must go to programs and features. There are several ways to find it. One of the simplest is to use the search box on the start menu.
   

  

  2. in the programs and features, click the link updates installed.
   

  

   
  3. after a few seconds, Windows Vista will load the list of installed updates. Scroll down the page until you find the update you want to delete, select it with the mouse and then click on uninstall.
   

  

   
  4. Windows Vista will ask you to confirm that you want to uninstall the update you selected. Click Yes and the uninstall process will begin.
   

  

   
  5 depending on the size of the update, the uninstall process may take from several seconds to several minutes.
   

  

  
  6. wait for the window above will disappear and, if necessary, restart your PC. The update is now deleted.
   
  
  Aziz Nadeem - Microsoft Support

• Problem Windows XP update, error 0 x 80246008.

  Original title: Microsoft Windows XP update problem

  I tried to install the updates of windows xp but it continues to run for centuries and when I click on update, it takes forever to update but after that it says update failed. I use Microsoft security essential and when I try to update so it maintains otherwise. I ran fix:

  Problems encountered:
  0 x (2013-12-31-T-02_01_05P) 80246008 error Windows Upadte---> is not fixed
  Recent updates installation problems---> not set
  Recent updates installation problems---> not set
  Search for missing or corrupt files---> fixed
  I have tried everything I know, but I always failed to settle this problem if someone can help me with this?
  Thank you.

  Hello

  Appreciate your efforts to try to resolve the problem. With the error you mentioned, I could find this Knowledge Base that should help you fix the problem with Windows Update.

  Error message when you search for available updates on the Windows Update Web site or on the Microsoft Update Web site: "0 x 80246008.

  Please check if you have encountered the article mentioned above. If this is not the case, try the suggested steps. Do not respond to the State of the question.

  Thank you.

• problem with automatic updates and Microsoft Update in Windows XP Service Pack 3

  My sister has a problem with the automatic updates. He has offered 6 updates and she moved them, but next time, she turned on the computer, he was offered the same 6 updates again. She has set up 5 or 6 times now, but she is always offered the same 6 updates every time she turns on the computer.  She tried yesterday to go to the web site Microsoft Update and update his computer, but it runs into the same problem. Microsoft Updates installed updates to update, but after restarting the computer and try to update again, he was offered the same 6 updates.

  I try to help fix and I need help.

  I tried stopping the service automatic updates, delete the contents of the download folder, update the Microsoft Updates web site and then by restarting the service of updates without result. She also tried to remove the 4 updates, she could find in Add/Remove Programs, but also without result.

  Help, please.

  Thank you

  You will be unable to effectively hide or update except if you have finished #2 in my previous answer.

  Or you can open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the difficulty in DEFAULT and modes then AGGRESSIVE and then restart. [1]

  Note: Microsoft offers free support for security updates only. Since KB982524 KB982168 & NOT related to security updates, free support is NOT available for them.

  PS: Updates of July 2011 have gone 'live'-online http://www.microsoft.com/technet/security/bulletin/MS11-jul.mspx

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove programs.

• Problems with latest updates Windows (KB) do not install & repeated notifications via the taskbar icon

  Hello everyone,

  In my view, there are many people who seem to have a similar problem to mine, although I was unable to find an answer to one of my questions in this post.

  Description of the problem:

  Although my Windows Update is defined on download & install updates during the night hours every day, the latest updates, KB26333880, KB2572073and KB2518864 are not be installed.  I went to the Windows Update site to check my editing history.  He showed the green/white checkmarks next to all 3 updates.  The record also showed that updates have been tempted 3 times during the night.  After clicking on the button "Express" on the Home Page, the results show 3 above updates, but show "0 bytes', then '0 download time. '

  To me, this indicates that there is no update to download, despite the yellow Shield of Notification of update continues to appear in the taskbar.

  Corrective measures attempted:

  1. I tried to download / install twice unsuccessfully using IE8 and FF (including restarting the computer).

  2. download & run the program MS Fixitattempted, but received a message which read, "an unexpected error has occurred, please try again later." No. error code has seen with this message.  (I could RECORD the program on my desktop... just couldn't run the establishment).

  3 tried to search for the presence of these updates using start > run > %windir%KB###.log (where the # is the individual number of update KB).  Every time - a message appears indicating that the file is not found.

  4 looked at the Add/Remove Programs list (with the Show updates checkbox checked).  No updates KB mentioned above could be found.

  5 with SAS, MBAMand Outpost Security Suite Pro scans revealed no malware/security issues.  (SAS and MBAM are used only as scanners on request).

  This problem with the updates does not download & repeated notifications being indicated in the taskbar has occurred many times before.  On this occasion, I called Microsoft several times before finally, my computer remotely accessible support person and spent about 50 minutes to fix the problem.

  (Also, it is noted that almost every support person I spoke with has always tried to tell me that MS is not help with the problem of this type.)  I had to be rather several in my reply... tell the person that MS IS in fact provide assistance free security-related Windows updates.  They now provide free assistance is unknown). Besides... I have more a phone number for States anyway.

  My questions to the community:

  1. is it possible to download & install these 3 updates?

  2 is there an explanation as to why MS Fixit program will not be installed, and if so, are there certain corrective measures I can take which will allow me to download & run this program?

  System Specs:

  Desktop Dell Dimension 3000 Tower;  WIN XP Pro SP3.  2 GB OF RAM;  3.00 gHz CPU;  Outpost Security Suite Pro.  MBAM Pro (on request only).  SAS (on request only);  SpywareBlaster;  IE8 & FF

  Thank you for your time and help, review!

  Pete C.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.

• code 80073718 how can I solve this problem because no update is being installed

  When you try to install updates on my computer they wil not install and the failure code is 80073718

  Hi LynMinchell,

  1. when exactly you get the error message?
  2. don't you make changes to the computer before the show?

  Method 1
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2
  I suggest to perform the clean boot and then try to install the updates.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 3
  I suggest you try the steps from the following link:

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 4
  I suggest you try the steps from the following link:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  
  Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article: back up the registry in Windows Vista
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• x 32 Vista - problems with periodic updates

  My computer tells me there are 14 new available updates (all are for Microsoft 2010-1 update of definition, 4 security updates and General updates 9). For almost every day of 12/23/11 - today, 15/01/11, I download and install without error.  I then restart my computer and the notification comes up saying that the same 14 updates must be downloaded and installed.

  I have downloaded and run the Microsoft Fix It tool twice, both times he told them there was a problem with the Installation of window and twice, the tool said them that solved the problem.

  Hello

   
  1. What tool Fixit did you run?
  2. What is the exact error code or the message that displayed the Fixit tool?
  
  Visit the following link, download the fixit and run it. Also perform the steps mentioned in the article.
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
  http://support.Microsoft.com/kb/910339
  
   
  You can read the article on the web page, the link is mentioned below
  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Problem installation of update KB2556532 on Windows Vista 32 bit - stops configuration stage 3 of 3

  original title; Problem installation of update KB2556532 on Windows Vista 32 bit

  I had problems for the last two months trying to install the update to windows KB2556532. I have Windows Vista 32 bit.

  I had a virus that has been cleaned of my laptop. It was windows recovery of fraud, and I don't know if this could have caused the problem at first, but after you have cleaned the virus always impossible to install this update.

  She always says that it has installed ok, but then when the computer has restarted, it is located in 'Configuring Updates step 3 of 3..' he said then that the update was not installed correctly and is back from changes.  Once the computer has booted I am prompted to install the update again.  It continues in this loop.

  Can anyone help me please with this.  I can't online solutions for this problem, I looked for a few weeks to try and fix myself.

  Unfortunately if this utility installs not it is not that there is something corrupt or prevent Windows to install correctly.

  At this point you can try to contact Microsoft through these channels: https://support.microsoft.com/oas/default.aspx?gprid=11732&st=1 to see if they can provide assistance.

• Problem with security update KB2667402, cannot install

  Original title: KB2667402

  An old Asus 1005pe netbook, yes the "Seashell" is still ongoing, problem with the above security update. Windows Update shows this update "has failed" to install. I checked the list of updates installed and found it even already installed. I think that the date, from 2012. I'm of the mindset that you 'don't fix if it is not broke' and 'if it is fixed, don't break again. " My questions are:

  If the update is already there, why is Windows up-to-date call for this again? It is already not working?

  My backstory is, this netbook was sitting on the shelf for five years before taking it out for use. Of course, I knew that update was necessary, so I put WU on the move with more than 238 updates on a single call. I don't know there was more, WU was executed several times.

  I ran the journal of reliability to see how the computer has been assigned, he showed a level of performance after the updates. The list of success or failure of update installs show more failures of this one update.

  My Adventure continued with Asus and their Asus "Live update" is now uninstalled and the function of the bios update goes to the site but does absolutely nothing. It's a question of Asus but part of my adventure too.

  I read another thread on this issue and a gentleman uninstalled the existing KB2667402 and leaves the new update to replace.

  If WU has this update on the new list, is the original in fact "broken" and need to be replaced?

  I do not want to solve this problem, if it is not broken. I hope that's not too talkative, I'm looking to understand and learn as well. I'm not even sure categories below are correct, please bear with me.

  Thanks for your time.

  Hello

  I realize has the inconvenience that you are experiencing with Windows updates. I will certainly help you to question.

  I suggest you follow the steps mentioned below:

  Method 1:

  Run the Windows Update Troubleshooter that refer to the link below:

  http://Windows.Microsoft.com/en-pH/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Reset the Windows Update components that refer to the link below:

  https://support.Microsoft.com/en-us/KB/971058

  Method 3:

  If you use a third-party security software, try to disable the third-party security software and check. Disable third-party security software.

  a: you should see an icon for your Antivirus program in the taskbar notification area. It is usually at the bottom right of your desktop.

  b. click the third-party security software, you will see a pop up.

  (c) in this pop and select the option to disable, click on it.

  d. now third-party security software will be disabled.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished.  If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attack.

  For more information, you can also check out the link below:

  Problems with installing updates

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• Problems with windows update and upgrade to Windows 10

  OS: Windows 7 Ultimate 64-bit Service Pack 1

  CPU: Intel i5 24 GB ram

  Product is enabled

  1. I'm unable to install the last update of security for Silverlight.  I tried to uninstall the application, but cannot.

  I am unable to run any apps or apps problems fixit.

  They have all the same details:

  Unknown package ID

  Path: unknown

  Error code: Ox80070003

  Source: temporary files

  I doubled the verification and services:

  Background

  Windows Update

  CPP

  Windows module

  are started

  I down loaded the tool for creating Windows Media and it failed after reaching 100%

  I downloaded several programs fixit, but none works

  Where should I go from here?

  After trying several things, I finally got 10 for the windows installation.

  I had to create a new admin account and did all the updates from there.

  Thanks for your help

• Problem with Windows Update after the new installation of Windows 7 Pro the Lenovo ThinkPad X 200

  I'm trying to do a fresh install of Windows 7 Pro on a Lenovo ThinkPad X 200. The product key is easy to find on the sticker of the ThinkPad. However, the version of Windows is hidden (for example, I can't check that my ThinkPad had originally installed Windows 7 Pro). I was able to install by using a Pro Win 7 SP1 CD ROM I bought for another installation. I used the ThinkPad I was trying to make the new facility on the product key. I was able to activate the Windows 7 Pro using the phone call and my cell phone. I checked the activation! However, I have problems with Windows update. The product key may be a different version of Windows 7. If so, why did it install and activate OK? Y at - it a fix for this problem or I have to buy a new version of Windows 7 Pro? Please note that I have not yet installed all drivers Lenovo ThinkPad as I can't seem to install correctly. Thank you!

  Since the issue is updated to Windows, it is not a product number key.

  You can reset the Windows Update components by running the Fixit on this page. But if there is malware present, she will continue to reset the connection to the update servers:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

• I have problems with windows update

  Hello

  I have problems with the updates of the window.  I read install my window.  and start the update.  I update well until it installs the update for service pack 2. Once it restarts is said to check the updates, you must first install an update for the update of the window...

  When I click on install update of the stop and keep it on the research.  I have don

  ' t even use all the data.

  I already tried the Microsoft fix it and some troubleshooting aspiration which I met on the Microsoft site.
  (error trouble shoots)

  Windows update error 0x80072efd - not fixed

  recent update - no fixed installation issue.

  Can anyone help me please with her.

  Thank you

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

  General remarks on event viewer
  http://www.gerryscomputertips.co.UK/syserrors5.htm