Custom fonts: min and max maximum size on the font file?

Similar Questions

• the maximum size of the accessible files in write in XP SP3

  I have inserted a well-known 32Gig flash into my USB memory and attempted to transfer 4 4Gig files in memory.  After only 3 file transfer, the transfer stopped and displayed the message that flash memory was full.  I checked the properties, and he showed that only 12Gig had been used. Is there a limit to how many files can be transferred?  I can't transfer more files to the flash memory.  Help!

  Check the format of the flash drive.  If it is formatted in FAT32 there is a limit of 4 GB in less than one byte for the maximum file size for a single file.  Format to NTFS and your problems should go away.

• Maximum size of the VMDK file we can assign during the P2V?

  Hello.

  We conduct P2V for a server physical and would like to address one of the disk for P2V.

  Rather than extend the VMDK disk in the future, we would like to extend during P2V.  Given that VMDK file maximum size is 2 TB for ESXi host, we can assign 2 TB for this VMDK file OR there is a recommended maximum size to use?

  Thank you

  I have myself yet, but I guess you should be able to assign the maximum size of virtual disk, depending on the block size of the data store (for ESXi versions before the 5.x/VMFS-5). That said, I suggest that you don't assign it more than 2 032 GB in order to create snapshots for this virtual disk (see "calculates the time system required by the snapshot files" at http://kb.vmware.com/kb/1012384)

  André

• As a custom calculation, Min and Max with 2 var?

  Is it possible in a custom calculation form select MIN (var1, var2) but a max of 8000. Any ideas would be greatly appreciated?

  The calculation script could be something like:

  Get the values of fields, as strings

  var s1 = getField("v1").valueAsString;

  var S2 = getField("v2").valueAsString;

  If (s1 & s2) {}

  Event.Value = Math.min (8000, s1 + s2);

  } else {}

  Event.Value = 0;

  }

• Maximum size of the psd file of CS5 2 gig?

  I´m PS CS5 64 bit on a system Win7 w 4 GB of RAM running. I ve read somewhere on a PSD file size limited to 2 giga max.

  Still holds true?

  Same thing on a mac w 8gig of RAM (and PS CS5 64-bit)?

  Thank you all for your comments!

  Cheers, Erbs

  It can only be read by Photoshop CS or newer. Don't know about Illustrator, but it's probably the same for her. You can also try using the format of TIFF files that supports up to 4 GB in size, but once again, only Photoshop CS or newer will open them if they are beyond 2 GB

• The maximum size of the Captivate file

  Is there a limitation of file size of Captivate projects or a maximum number of slides that can be included in a project?

  Hi Jay

  I saw some other report that Support Adobe boasts a 50 meg orientation 'Cap '. I have always recommended 50-65 slides as a very broad and general upper limit. That varies of course, depends on several factors. The number of objects on each slide, the dimensions off-brand project, etc.

  See you soon... Rick

• the min and MAX values maintain their good values tia sal22

  the min and MAX values maintain their good values tia sal22

  Hi all

  I have problems a little value to stay in their correct min and max values min and max.
  Continue to change their values (up and down) trying to get the max value to only display the maximum value at a given time and the same for the min value.  I looked at the examples max and min and it seems that it should be in a while loop
  http://forums.NI.com/NI/board/message?board.ID=170&thread.ID=359822

  but I would add another while loop and if so put it in the loop for? or is there a better way to do it.

  TIA sal22

  Hi sal22,

  I thought it was just one example you found somewhere, because it is called red rooster. See the attached example.

  Mike

• Grouping and then find the min and max

  DROP TABLE purge of y;

  CREATE TABLE y
  (
  ID NUMBER (10),
  START_DATE_TIME NUMBER (15),
  END_DATE_TIME NUMBER (15)
  );

  INSERT INTO y VALUES (1, 20140602164819, 20140606140851);
  INSERT INTO y VALUES (1, 20140827141743, 20140827142131);
  INSERT INTO y VALUES (1, 20140827141744, 20140827141835);
  INSERT INTO y VALUES (1, 20140827141744, 20140827142131);
  INSERT INTO y VALUES (1, 20140827141944, 20140827142131);
  INSERT INTO y VALUES (1, 20140827141944, 20140924142131);
  INSERT INTO y VALUES (1, 20140927141944, 20141027142131);
  INSERT INTO y VALUES (2, 20140602164819, 20140606140851);
  INSERT INTO y VALUES (2, 20140827141743, 20140827142131);
  INSERT INTO y VALUES (2, 20140827141744, 20140827141835);
  INSERT INTO y VALUES (2, 20140827141744, 20140827142131);
  INSERT INTO y VALUES (2, 20140827141944, 20140827142131);
  INSERT INTO y VALUES (2, 20140827141944, 20140924142131);
  INSERT INTO y VALUES (2, 20140927141944, 20141027142131);

  COMMIT;

  Select
  *
  Of
  There
  order by 2, 3;

  out necessary: when the output of the table are sorted by start_date_time and end_date_time in ascending order.
  and when the value of for a particular id start_date_time is located between the
  another set of values start_date_time and end_date_time for the same id then min (start_date_time) and max (end_date_time) is the desired output.

  and if there is no overlap then (start_date_time) min and max (end_date_time) is the output desired.

  and for each line of the output in ascending order of line number order addd;

  Example output is in the output table named

  drop table output is serving;

  create an output table
  (
  ID NUMBER (10),
  START_DATE_TIME NUMBER (15),
  END_DATE_TIME NUMBER (15),
  ROW_NUMBER NUMBER (10)
  );

  
  Values to INSERT OUTPUT (1, 20140602164819, 20140606140851, 1);
  Values to INSERT OUTPUT (1, 20140827141743, 20140924142131, 2);
  Values to INSERT OUTPUT (1, 20140927141944, 20141027142131, 3);
  Values to INSERT OUTPUT (2, 20140602164819, 20140606140851, 1);
  Values to INSERT OUTPUT (2, 20140827141743, 20140924142131, 2);
  Values to INSERT OUTPUT (2, 20140927141944, 20141027142131, 3);

  COMMIT;

  SELECT
  *
  Of
  output
  ORDER BY 1,2,3,4;

  Thank you

  SQL_Novice

  Hello

  Your postal code.  It is difficult to tell what you're doing wrong without knowing what you are doing.

  user6166680 wrote:

  Hi Frank:

  Max works for ID 3 values only because there is only one group here, as all other values compared, they overlap with max (end_date_time);

  but when I use MAX for ID 1 and 2, the result set is not the same thing as LAG works because there is a GAP...

  Exactly, you have to find the gaps.  If start_date_time is less than or equal to the MAXIMUM of all the end_date_times earlier, then it isn't a gap; Otherwise, there is a gap.

  What is the problem with MAX?

  WITH got_new_group AS

  (

  SELECT id, start_date_time and end_date_time

  CASE

  WHEN start_date_time <= > MAX (end_date_time) OVER (PARTITION BY id )

  ORDER BY start_date_time

  end_date_time

  ROWS BETWEEN UNBOUNDED PRECEDING

  AND 1 PRECEDING

  )

  THEN 0

  1. OTHER

  END AS new_group

  OF y

  )

  got_group_number AS

  (

  SELECT id, start_date_time and end_date_time

  SUM (new_group) OVER (PARTITION BY ID.

  ORDER BY start_date_time

  end_date_time

  ) AS group_number

  OF got_new_group

  )

  SELECT id

  MIN (start_date_time) AS group_start_date_time

  MAX (end_date_time) AS group_end_date_time

  group_number

  OF got_group_number

  GROUP BY id, group_number

  ORDER BY id, group_number

  ;

  You will notice that it is exactly what I posted earlier, in response #5, except that instead of using the OFFSET it uses MAX.

  Output:

  ID GROUP_START_DATE_TIME GROUP_END_DATE_TIME GROUP_NUMBER

  --------------- --------------------- ------------------- ---------------

  1 20140602164819 20140606140851 1

  1 20140827141743 20140924142131 2

  1 20140927141944 20141027142131 3

  2 20140602164819 20140606140851 1

  2 20140827141743 20140924142131 2

  2 20140927141944 20141027142131 3

  3 20140330041350 47121231000000 1

• Find dates MIN and MAX

  Please, advise how correctly find MIN and MAX dates.
  The XML code:

  <DATES>
  <DT>2011-02-24</DT>
  <DT>2011-02-25</DT>
  <DT>2011-02-26</DT>
  <DT>2011-02-27</DT>
  <DT>2011-02-28</DT>
  </DATES>

  Model:

  <?xdoxslt:minimum(DT)?>
  <?xdoxslt:maximum(DT)?>

  The output:

  0
  20110224

  Expected results:

  2011-02-24
  2011-02-28

  Hello

  If your data is:
  
  
  
  

  2008-10-04
  
  1
  
  
  
  2009-10-21
  
  3
  
  
  
  2009-11-05
  
  4
  
  
  
  2008-11-10
  
  2
  
  

  The maximum is given by: / ROWSET/ROW/DT [.. / DT_RANK = count (//ROW)]
  and the minimum is: / ROWSET/ROW/DT [.. / DT_RANK = 1]

  There may be more effective, but it works.

  concerning

  Jorge

• button conrol min and max range option during execution

  Is it possible to change the window button conrol min and max Beach setting during execution?

  Thank you very much Nick.

• Delete the min and max labels on chart axis markers

  Hello

  Is it possible to remove the min and max labels on chart axis markers? For example, see the screenshot below. Can I remove the numbers circled in green without changing the range of the axis? In some cases (like this one), the presence of the min and max number of cases other marker values to not be displayed (red line). I am aware that "10" is displayed if I enlarge the graph, but this isn't an option for my application. FYI - the screenshot is from the side before the attached VI.

  Thanks for any help,

  Kind regards

  Stu

  

  You can't delete them because they are the main features to be able to set the max and min on the graph of the Panel before if you use no-AutoScaling.

• Min and Max on a table

  Hello. I want to make a program where I want to generate a sine and take only the monotonous positive part.

  So I thought to find the min and max of the function index and make a program like the one attached.

  As you can see that if you set the frequency to 10 Hz, it works fine... the problem is when you change the frequency such as 20 or 50 H.. t seems that it is not find the min and max correctly.

  Can you suggest me some tips?

  Thank you

  s.turino84 wrote:

  and take only positive part monotonous.

  This means that the derivative is positive.  So, make a derivative.  If the derivative is greater than 0 keep the present value, or the value 0.

  

• Taskbar and min and max do not show on the homepage and e-mail

  When cleaning key board, the taskbar, and the top part of the page containing the min and max symbols disapperared.  How can I restore them?

  Hello

  I suggest you to try the steps below and check if it helps.

  (a) open Internet Explorer by pressing the button of the window of your keyboard, then clicking on Internet Explorer.

  (b) move your cursor to the top right and click the Tools button, and then click file.

  (c) uncheck the option full screen .

  You can also press F11 on your keyboard, which would help you to get to the normal screen.

  Hope this information is useful.

• Min and Max in a row!

  Hi guys,.

  Do you know how I can get the MIN and MAX in a row?

  For example:

  C1 | C2 | C3 | C4 | C5 | C6 | C7 | C8

  10. 50. 70.  5. 90. 135. 4   | 60

  I return 4 and 135.

  I can return it without using the service?

  Thank you

  Eric

  create table t as
  with d as (
    select 1 n from dual
    union all
    select null from dual
  )
  select a.n c1, b.n*2 c2, c.n*3 c3
  from d a, d b, d c;
  
  select c1,c2,c3,
  greatest(
    coalesce(c1,c2,c3),
    coalesce(c2,c3,c1),
    coalesce(c3,c1,c2)
  ) greatest_c,
  least(
    coalesce(c1,c2,c3),
    coalesce(c2,c3,c1),
    coalesce(c3,c1,c2)
  ) least_c
  from t;
  

  C1	C2	C3	GREATEST_C	LEAST_C
  1	2	3	3	1
  1	2		2	1
  1		3	3	1
  1			1	1
  	2	3	3	2
  	2		2	2
  		3	3	3

• Help the query to list all the days between MIN and MAX date in a table

  Hello

  Sorry, this may have already responded earlier, but I really struggled to find a previous response with the new provision of the RTO.

  In a DB 11 g, I date MIN and MAX in a table:

  {code}

  SELECT MIN (process_date) start_date, MAX (process_date) end_date FROM my_table;

  {code}

  I would get every day between these 2 dates. I mean even is there is no record in the table for a date.

  Is this possible?

  Thanks in advance,

  Olivier

  Hello

  Do you mean something like this?

  ranit@XE11GR2>> ed
  Wrote file c:\rb\1.sql
  
    1  with xx as
    2  (
    3      select
    4     to_date('05-06-2013','dd-mm-yyyy') min_d,
    5     to_date('20-06-2013','dd-mm-yyyy') max_d
    6      from dual
    7  )
    8  --
    9  -- end of test data
   10  --
   11  select
   12     min_d + level date_x
   13  from xx
   14* connect by level<=(max_d-min_d)
  ranit@XE11GR2>> /
  
  DATE_X
  -------------------
  06-06-2013 00:00:00
  07-06-2013 00:00:00
  08-06-2013 00:00:00
  09-06-2013 00:00:00
  10-06-2013 00:00:00
  11-06-2013 00:00:00
  12-06-2013 00:00:00
  13-06-2013 00:00:00
  14-06-2013 00:00:00
  15-06-2013 00:00:00
  16-06-2013 00:00:00
  17-06-2013 00:00:00
  18-06-2013 00:00:00
  19-06-2013 00:00:00
  20-06-2013 00:00:00
  
  15 rows selected.