Application of RT deployment

Similar Questions

• "JNDI name is already in use" error when deploying ADF Application after the deployment of Interface of AM Service

  Hello

  12.1.3 JDeveloper / WLS 12.1.3 / Windows 7 64-bit OS.

  I am facing the problem that is mentioned in the following post.

  https://community.Oracle.com/thread/2284290

  I created a simple ADF page with the data to display in the Employees table. The page works fine.

  I added a custom method to the AM and a profile of "Business Service Interface components" deployment of the AOS.

  When I'm trying to deploy the stand-alone WLS Service, it gives the error below.

  If I deploy only the AM Service interface, the web service deployment is going very well.

  If I cancel the deployment of the AM Service and deploy ADF EAR, then it also works very well.

  But if I deploy the AM Service and then try to deploy the EAR, then it gives the error below.

  And vice versa, if I deploy EAR application, and then deploy the AM service, it gives the error below.

  It was working fine until 11.1.1.7.

  I have done this repeatedly for a long time and wasn't any problem in 11.1.1.7 deployments.

  If something has changed in 12.1.3?

  Even if the AM Service is existing, it is deployed in the same application, it should be able to just crush?

  Here are the results with different versions

  11.1.1.7 - domain of the ADF - Standalone Server - works fine

  11.1.1.7 - SOA - Standalone Server - domain works very well

  12.1.3 - error field - integrated WLS - ADF

  12.1.3 - error field - independent server - SOA

  (The foregoing analysis is based on a simple project ADF as a point of Contact for that matter).

  Real-world scenario

  --------------------

  We need this because ours is a BPM Application and the Composite depends on the AM Service, so the AM service must first deployed in the field of the SOA.

  Then, we make the process as well as the ADF UI for task forms. ADF project depends also on the model project

  We get the error during the deployment of the BPM project and the ADF UI project below.

  Error

  -----

  Unable to deploy EJB: ModelEJB.jar model.common.HRAMServiceBean:

  [EJB:011055] The EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar) ", the JNDI name" HRAMServiceBean #model.common.serviceinterface.HRAMService "is already in use." You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  [12: 02:07] caused by: java.lang.Throwable: substituted for the missing class [EJB - 11055] the EJB deployment error ' model.common.HRAMServiceBean (Application: employees, EJBComponent: ModelEJB.jar)', the JNDI name "HRAMServiceBean #model.common.serviceinterface.HRAMService" is already in use. You must assign another name JNDI in weblogic-ejb-jar deployment descriptor. XML or annotation corresponding to this EJB before it can be deployed.

  Thanks for any help

  Sameer

  Found a workaround for this problem.

  I don't have to do this in 11.1.1.7 well!

  You don't know if it's the right solution or not!

  If anyone of you knows a better solution, please share.

  I did the 2 following things.

  a. classes of the AM Service Interface of removed files from deployment profile filters

  ViewController project-> properties-> deployment profile--> filegroups--> WEB - INF / classes-> filters

  : Uncheck * Service *. * files (4 - Service.class, Service.wsdl, Service.xsd, ServiceImpl.class)

  b. deleted the deployment profile of library jar ADF for the model project

  Model project-> properties-> deployment

  : Remove the deployment of ADF library jar files profile

  And now I am able to deploy time interface AM Service and application.

  It works for me because I won't need to deploy the AM Service interface again while deploying the process / code of the ADF.

  Since I will deploy the Service Interface of first Business components separately.

  Thanks and greetings

  Sameer

• Application of ADF deploys successfully but run displays "Loading" constantly

  Hello
  
  I have a simple form ADF, which deploys successfully on the integrated server (10.3.5) and also runs correctly using the < Home > URL: port / < contextroot > /faces/ < formname > .jsp
  Same application compiles and deploys successfully (no error) on the stand alone wls 10.3.6 with ADF performance (11.1.1.6), but when I run the jsp in the browser in the same form displays "Loading" constantly.
  Both deployments have been made to the adminserver
  
  Would appreciate any pointers
  
  Published by: user6739500 on May 20, 2013 11:12
  
  Published by: user6739500 on May 20, 2013 11:49

  Caused by: java.sql.SQLException: ORA-01005: password null; connection refused

  Check that your application module uses JDBC data instead of the connection URL source

  Click with the right button to click for the app module configuration > localAppModule (don't remember exactly) but you will see here

  to use JDBC, data source to ensure it is created in the WLS console as well as the Services > sources of data tab and use the same JNDI name

  This might help http://techiecook.wordpress.com/2010/12/02/oracle-weblogic-adf-datasources/

  Published by: bamba Zeeshan on May 20, 2013 15:54

• The application has been deployed previously versioned "V2.0."

  Hi am having this error when running my appication am in jdeveloper application 11.1.1.6.0, the worked fine the day before

  IntegratedWebLogicServer startup time: 34045 ms.[Running application  on Server Instance IntegratedWebLogicServer...] 
  
  IntegratedWebLogicServer started.
  [09:32:46 AM] ----  Deployment started.  ----
  [09:32:46 AM] Target platform is  (Weblogic 10.3).
  [09:32:46 AM] Retrieving existing application information
  [09:32:46 AM] Running dependency analysis...
  [09:32:46 AM] Deploying 3 profiles...
  [09:32:46 AM] Wrote MAR file to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\AutoGeneratedMar
  [09:32:49 AM] Wrote Web Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\ViewControllerWebApp.war
  [09:32:49 AM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
  [09:32:49 AM] Info: Any customizations created while running the application will be written to 'C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.mds.dt\adrs\\AutoGeneratedMar\mds_adrs_writedir'.
  [09:32:49 AM] Wrote Enterprise Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs
  [09:32:49 AM] Deploying Application...
  <16 Apr 2013 9:32:49 AM> <Error> <Deployer> <BEA-149082> <You cannot deploy application 'j2ee-app' without version. The application was previously deployed with version 'V2.0'.> 
  <16 Apr 2013 9:32:49 AM> <Warning> <Deployer> <BEA-149124> <Failures were detected while initiating deploy task for application 'j2ee-app'. Error is: '[Deployer:149082]You cannot deploy application 'j2ee-app' without version. The application was previously deployed with version 'V2.0'.'> 
  [09:32:49 AM] ####  Deployment incomplete.  ####
  [09:32:49 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  #### Cannot run application  due to error deploying to IntegratedWebLogicServer.
  [Application  stopped and undeployed from Server Instance IntegratedWebLogicServer]
  
  i don't what to delete C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\

  Edited by: adf009 2013/04/16 10:45

  Hello

  Check below link,

  Integrated WebLogic does not request Jdeveloper

  Nilum.

• Application after the deployment of the OTA does not

  Hello! I managed to deploy my application by using OTA and it is loaded successfully, but when I try to run it, it only opens and shows no message.

  What happens in the Pearl 8100 Simulator and not in the Storm 9530 Simulator.

  I'm a bit lost where I should be looking error messages or newspaper. Any advice?

  TX!

  RexDoug wrote:

  What level JDE you used to compile the code?

  If you have compiled on the 9530 4.7 and attempt to run the program on the 8100, it will fail.

  If you run the Simulator 8100 under the debugger, you must get a break on any exception, then inspect the call stack to determine the breaking point.

  Thank you! I had never tried to debug a simulator course. It was a problem of path of resources. Fortunately, your suggestion got me in the rail: somehow during the Eclipse compilation, I didn't have this problem, but when I went to the JDE, in order to compile it to 4.2.0 it became a problem.

• 10 blackberry applications can be deployed in windows phone 8?

  Hi all

  I'm developing an application of cascades for blackberry 10 and I wonder what it can deploy in windows phone 8 due to all both are using C++?

  Thank you.

  No.... It is not the language that counts. What is important is the SDK, the API set available to the developer to call in the OS and libraries to get tasks done. Windows Phone 8 and BB10 don't actually have nothing in common in these regions, so BB10 apps absolutely cannot be deployed Windows Phone 8, in general.

  That said, sometimes we can use a restricted subset closely available APIs and build an application that can be re-targeted pretty easily. Using WebWorks (HTML5 stuff) can recover you a part of the way that he, and third-party frameworks that you can probably get most of the way there. I'm not familiar with the names and details, so I'll leave any other comments in this regard.

  In a very simple sense, however, you can deploy ever * exactly * the same application because the packaging is different. BB10 apps are packaged as files '.bar', with a certain set of content, while Windows applications are something else... It of like how a ".exe" file will work very well on DOS/Windows, but cannot be used on a Linux platform, even if 100% of the code it contains is compatible.

• How to change the source of data in application with the deployment plan

  Hello

  JDev Version: 12.1.3

  I can't change the source data with the deployment plan bc4j.

  Any example on this requirement?

  Thank you

  Anil

  Well, if you take a look at:

  http://Biemond.blogspot.com/2009/04/using-WebLogic-deployment-plan-to.html

  (one of the links in the link you get), you will see Edvin Biemond answwer:

  "you must change the configuration of module of the Application so that it uses a data source. and in the deployment of applications disable deployment of jdbc connection.

  Now you is enough to make the good source of data on each wls and deploy ears. »

  The simplest (and probably the best) way is, as I told you, and you are also mentioned: open up JDeveloper and change declaratively and re-download the ears

• Cannot invoke the stubborn task in adf application flow after deployment on stand-alone WSL

  Hello.

  We have developed application in jdeveloper 12.1.3 using ADF workflows and *.jsp (try us and *.jspx also) pages.

  On integrated weblogic application server works, but after successfully deployment on stand-alone WLS (ver. 12.1.3, demployment mode domain) with ADF runtime 12.1.3, we cannot call activity of workflow (bounded task flows) on click of a button. If we call button click on the page of the progress of the task without terminals began that it works well.

  On the server we have deployments:

  ADF. Oracle.businesseditor (1.0,12.1.3.0.0)

  ADF. Oracle.Domain (1.0,12.1.3.0.0)

  ADF. Oracle.domain.WebApp (1.0,12.1.3.0.0)

  consistency-transaction-rar

  Application of the DMS (12.1.3.0.0)

  EM

  emagentsdkimplpriv_jar (11.2.0.1.0,12.1.0.3.0)

  emagentsdkimpl_jar (11.2.0.1.0,12.1.0.3.0)

  emagentsdk_jar (11.2,12.1.0.3.0)

  EMAS

  EMCORE

  emcoreclient_jar

  emcorecommon_jar

  emcoreconsole_jar

  emcoreintsdk_jar (11.2.0.1.0,12.1.0.0.0)

  emcorepbs_jar

  emcoresdkimpl_jar (11.2.0.1.0,12.1.0.0.0)

  emcoresdk_jar (11.2.0.1.0,12.1.0.0.0)

  emcore_jar

  em_core_ppc_pojo_jar

  em_sdkcore_ppc_public_pojo_jar

  JSF (2.1, 2.1.7 - 01-)

  jsr311-API (1.1.1,1.1.1)

  JSTL (1.2,1.2.0.1)

  log4j_jar (1.3,1.2.15)

  ODL.clickhistory (1.0,12.1.3)

  ODL.clickhistory.WebApp (1.0,12.1.3)

  OHW - RCF (5,12.1.3.0.0)

  OHW - uix (5,12.1.3.0.0)

  Oracle.ADF.dconfigbeans (1.0,12.1.3.0.0)

  Oracle.ADF.desktopintegration (1.0,12.1.3.0.0)

  Oracle.ADF.desktopintegration.Model (1.0,12.1.3.0.0)

  Oracle.ADF.Management (1.0,12.1.3.0.0)

  Oracle.BI.ADF.Model.slib (1.0,12.1.3.0.0)

  Oracle.BI.ADF.View.slib (1.0,12.1.3.0.0)

  Oracle.BI.ADF.WebCenter.slib (1.0,12.1.3.0.0)

  Oracle.BI.composer (11.1.1,0.1)

  Oracle.BI.jbips (11.1.1,0.1)

  Oracle.dConfig - infra (2.0,12.1.3)

  Oracle.jrf.System.Filter

  Oracle.jsp.Next (12.1.3,12.1.3)

  Oracle.pwdgen (2.0,12.1.3)

  Oracle.SDP.client (2.0,12.1.3)

  Oracle.WebCenter.composer (2.0,12.1.3)

  Oracle.WebCenter.Skin (2.0,12.1.3)

  Oracle.WSM.Console.Core.View (1.0,12.1.3.0)

  Oracle.WSM.seedpolicies (2.0,12.1.3)

  orai18n-ADF (11,11.1.1.1.0)

  OWASP. ESAPI (2.0,12.1.3)

  State-Management-Provider-Memory-rar-12.1.3

  UIX (11,12.1.3.0.0)

  webapp

  WebApp1

  wls_jrf

  wls_reconfig_jrf_12

  WSIL-wls (12.1.3.0.0)

  +++++++++++

  Our problem:

  Of view1.jspx on click commandButton1, we cannot call taskFlowCall1.

  During the click on we see view1.jspx refreshes, but should be called view2.jspx.

  +++++++++++

  Sources

  -adfc_config.xml-

  <? XML version = "1.0" encoding = "windows-1251"? >

  " < adfc-config xmlns =" http://xmlns.Oracle.com/ADF/controller "version ="1.2"> "

  < view id = "View1" >

  View1.jspx < page > < / print this page >

  < / view >

  < task-flows-call id = "taskFlowCall1" >

  <-flow-reference to tasks >

  /Web-INF/taskFlowCall1.XML < document > < / document >

  taskFlowCall1 < id > < /ID >

  < / task-flow-reference >

  < / task flows-call >

  < rule of flow control = '__1' id >

  View1 < of-activity-id > < /-activity-id >

  < control-flow-case id = "__2" >

  TFC < from outcome > < / de-results >

  taskFlowCall1 < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < / control-flow-rule >

  < / adfc-config >

  -taskFlowCall1.xml-

  <? XML version = "1.0" encoding = "windows-1251"? >

  " < adfc-config xmlns =" http://xmlns.Oracle.com/ADF/controller "version ="1.2"> "

  < - flow - the definition of task id = "taskFlowCall1" >

  View2 < by default-activity > < / default activity >

  < transaction >

  < new-transaction / >

  < / transaction >

  < data-control-scope >

  < shared / >

  < / data-control-scope >

  < view id = "view2" >

  View2.jspx < page > < / print this page >

  < / view >

  < id of task-flow-return = 'Cancel' >

  < result >

  cancellation of < name > < / name >

  < rollback / >

  < / results >

  < / task-flow-back >

  < task-flows-call id = "taskFlowCall2" >

  <-flow-reference to tasks >

  /Web-INF/taskFlowCall2.XML < document > < / document >

  taskFlowCall2 < id > < /ID >

  < / task-flow-reference >

  < / task flows-call >

  < rule of flow control = '__1' id >

  View2 < of-activity-id > < /-activity-id >

  < control-flow-case id = "__2" >

  Cancel < from outcome > < / de-results >

  cancellation of < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < control-flow-case id = "__3" >

  tfc2 < from outcome > < / de-results >

  taskFlowCall2 < to-activity-id > < / to-activity-id >

  < / control-flow-case >

  < / control-flow-rule >

  < / task-flow-definition >

  < / adfc-config >

  -view1.jspx-

  <? XML version = "1.0" encoding = "UTF - 8"? >

  " < = xmlns:jsp jsp:root ' http://Java.Sun.com/JSP/page "version ="2.1"xmlns:f =" " http://Java.Sun.com/JSF/core "

  ' xmlns:af = ' http://xmlns.Oracle.com/ADF/faces/rich "xmlns:h =" http://Java.Sun.com/JSF/html ">

  < jsp:directive.page contentType = text/html"; Charset = UTF - 8 "/ >

  < f: view >

  < af:document title = "view1.jspx" id = "d1" > "

  < af:form id = "f1" >

  < h:commandButton value = "commandButton1" id = "cb1" action = "tfc" / >

  < / af:form >

  < / af:document >

  < / f: view >

  < / jsp:root >

  ++++++++++++

  Pls help me.

  We found a solution to the problem yourself.

  Our solution:

  On each page that uses the activity to call a workflow in the bindings, we added the executor of the ADF task flows Bindings type - taskFlow.

  The property is set (in my example):

  ID - taskFlowCall1

  taskFlowId - /WEB-INF/taskFlowCall1.xml#taskFlowCall1

  That's all.

• Silently uninstall applications with the deployment of Exceptions tool

  How are we supposed to uninstall applications installed via the deployment of Exceptions tool?

  At the time of the writing of this I can't see myself not class install as a stream of work supported.

  It would be a great help if we could have a workflow of uninstalling too.

  Any suggestions on how to work around it also appreciated.

  Most of the applications in the Exceptions folder can be uninstalled using the uninstall switches standard msi.

  That would not apply using Adobe or AIR that would uninstall it via the operating system.

• Automated applications on Weblogic deployment

  Hello

  I'm studying ways to deploy applications to Java on Weblogic 11 g in an automated way.

  I have a few scripts that are pushing an application to Weblogic from a local computer. This is achieved by running Java and calling the weblogic. Deployer class in wlfullclient.jar and works OK: I can deploy, cancel the deployment and redeployment of the application.

  My question: is it possible to do the reverse? Learn to run a script on the Weblogic Server that captures the application on a remote server, copy and deploy it? If nothing else, it would mean that I could avoid writing clumsy batch files...

  Thanks in advance for any advice.

  I found a few alternatives:

  (1) use weblogic. The Deployment Manager on the server Weblogic (of the sort that the administrator of the server is local) and get the artifact from a remote machine;

  (2) using WLST scripts ability to do the same thing, that is run on the WebLogic Server and get the artifact from a remote machine.

• ADF Application - Development Mode deployment problem

  Hi Experts,
  
  I have jdev11.1.1.5.0 in combination with weblogic 10.3.5.
  
  my application works fine, while running on integrated wls (just give a click right and on my page jspx - auto deployment).
  
  If I go with manual deployment of option on same wls integrated or stand-alone wls means
  
  I can able to get my login page, if I have some means of connection he did re - direct to my index page than it would be problem? (it doent replicate this kind of integrated wls (auto deployment))
  
  Details of my Application
  use all adf security. my login page is in extended session bean index page - backing bean of limited scope.
  
  My diary shows, your user name and password is correct. This means that it can have access to my Module of the Application.
  
  use adfc - config to redirect

  <control-flow-rule id="__5">
      <from-activity-id id="__6">loginPage</from-activity-id>
      <control-flow-case id="__7">
        <from-outcome id="__13">error</from-outcome>
        <to-activity-id id="__8">loginPage</to-activity-id>
      </control-flow-case>
      <control-flow-case id="__14">
        <from-outcome id="__16">success</from-outcome>
        <to-activity-id id="__15">Indexpage</to-activity-id>
      </control-flow-case>
    </control-flow-rule>

  This project does not behave like this days Olden.
  
  I scored on the sample for deplying a standlone wls and wls adf application built-in. It is very good.
  
  can anyone guide me where am?
  
  one has an idea?
  
  so am manual deployment I had dialogue "deployment configuration" to deploy.
  
  I got this in my journal.
  

  [01:07:44 PM] Entering Oracle Deployment Plan Editor
  [01:07:46 PM] No metadata repositories found on target server. Using values found in adf-config.xml. //show this red collor

  User707, can you on which you deploy the application? It is a stand-alone server or server that comes with jdev?
  Question: can you post the url that you use to launch the application on the server? The url contains ".jspx" as part of it?
  If Yes, try to remove the ".jspx" out of the url.

  Timo

• A JDeveloper 10.1.3 application can be deployed in Oracle AS 10.1.2.3?

  Hello
  
  We have currently a 10.1.2.0.2 application server installed and a stand-alone application 10.1.3 Server version 3 which contains an application written in JDeveloper 10.1.3. I intend to upgrade our 10.1.2.0.2 application server to 10.1.2.3 and I wonder if this will allow me to deploy the JDeveloper OC4J application in it and blow the R3 stand-alone application server? It would be good if it was possible because our R3 application server is a bit crumbly and I'd love to get rid of it. Can someone advise me on this?
  
  Thank you
  Adam

  Adam J Sawyer wrote:
  Hello

  We have currently a 10.1.2.0.2 application server installed and a stand-alone application 10.1.3 Server version 3 which contains an application written in JDeveloper 10.1.3. I intend to upgrade our 10.1.2.0.2 application server to 10.1.2.3 and I wonder if this will allow me to deploy the JDeveloper OC4J application in it and blow the R3 stand-alone application server? It would be good if it was possible because our R3 application server is a bit crumbly and I'd love to get rid of it. Can someone advise me on this?

  Thank you
  Adam

  Hi Adam,.

  1 Please note that the Patch Sets are not released new version. They have a significant difference between them. Upgrade patches game brings no new features or functionality. They fix problems with the old version and solve problems.
  So if your application, which is currently deployed to 10.1.3 AS, is not deployable on OC4J - 10.1.2.0.2, then it will be not deployable to ACE - 10.1.2.3 either.
  2. the question of whether an application is deployable on the OC4J from an AS Rel 2 can be verified by seeing which version of J2EE/JRE, it uses, and which one is taken in charge by 10.1.2.0.2 OC4Js.
  3. you can fill your love; blow 10.1.3 AS and then reinstall to try to iron out the debris.

  Kind regards
  AMN

• Jdev 11 g: how to determine the URL of the application after the deployment of WLS10gR3

  Hello
  
  I have deployed an external application from 11g to WLS 10.3 using the WLS console.
  Because I use WLS first I can't know the URL to start the application.
  I've already looked through the docs, but without success.
  
  Please give me the missing data.
  
  concerning
  Peter

  Hello

  If you look at your project properties for JavaEE application so you can see the context path and the name of the application in there. When you deploy JDeveloper without changing names here, would then become the URL

  Host:port / context_path_as_shown_in_jdev/faces/leader. JSPX

  Frank

• Slow application Simulator BB10 deployment

  Hi all

  I use the BB10 Simulator for deploing apps, but when the wifi does not work it takes tha more a minute, but when wifi is off, it just takes a few seconds...

  Someone knows how to fix this?

  Thank you!

  Correction: Upadte the VM and the IDE

• How can I access dynamically FP2200 serial number of my deployed RT application

  I'm looking for a way to get the serial number of a target FP of the application that is deployed on it. I want to use this number in my database for the database can identify the FP in a unique way that is guaranteed to not change. A RT application needs to know the serial number, so it can be used in queries.

  I would also like to find a way to dynamically read the name assigned to the module.

  I don't see a way to access the serial number or the name in labview but I don't know that it must be stored somewhere, since it can be seen in the M & A Explorer.

  Hi kgolden.  Try the GET target information (IP) .vi.  In my installation (8.5.1), it is under 7.x, libraries user, System RT replication functions, so my

  guess is that it comes from the replication of system libraries, which have a lot of other nice stuff.

  Matt