Application of starter designs

Similar Questions

• Windows Media Center Gets error: invalid Application - cannot start

  Windows Media Center (of the month last Vista 32-Bit)

  I have problems to make internet TV, news and Netflix to connect to the internet when you use Windows Media Center.  They are all under the TV + movies option during the WMC.  I get an error saying [invalid Application - cannot start "" ""].  Not sure if this is because the internet connection that I use is not one that has a user name or password.  Not know how to configure it for this version of Windows.  I don't get this problem when you use Windows Media Center in Windows 7.

  At the opening of Windows Media Center I get the following message: INVALID APPLICATION; "Unable to launch SymAddin; and a checkbox to disable this Application (I have not checked the box).
  http://social.answers.Microsoft.com/forums/en/vistapictures/thread/ea536e68-5903-444C-8d10-6bd9fa936dc9

  "Invalid application-unable to launch" Windows Media Center - MSNBC.com
  http://social.answers.Microsoft.com/forums/en/vistaprograms/thread/18c69d9b-e93d-4350-A17C-15ef9ae7d76f

  "Has anyone, using windows vista ultimate media center, was a 'failed to launch'"demand invalid." »
  http://Askville.Amazon.com/Windows-Vista-Ultimate-Media-Center-unable-launch-invalid-application/AnswerViewer.do?RequestId=2894719

  I guess that set up WMC is identical in both Vista and Windows 7?
  http://www.Microsoft.com/Australia/Windows/Windows-Media-Center/

  Your firewall is blocking access to the WMC?

• How to configure an application automatically starts when the unit is turned on

  I used the instructions in:

  How to-configure an application automatically starts when the unit is turned on

  Article number: DB-00002

  1. - in the BlackBerry JDE, right click on the project and select Properties.
  2. - in the Application tab, check the function of automatic execution on startup checkbox.
  3. - If you want your application to run in the background and not appear on the Ribbon, select the Module system.

  My application starts automatically in debugging, but not in my BB8100 pearl.

  Any ideas? THX...

  If you are looking for in the unit LOG immediately after startup, you should find out the reason.  I suggest to you that what follows is the most likely reasons:

  (a) application not signed

  (b) developed for a different level than the device OS.

• How to schedule a task to launch an application to start another application?

  I want to launch an application to start another app, but I ca't know how to configure Task Scheduler.

  For relaxation, I put on an event on the Source I retrieve the name of the application in the menu drop down and let Event_ID field blank. On the Action tab, I place the path and the app name triggered, as usual and complete the remaining sections as usual, but it does not work. It is not raised when I starts the main application.
  I used the Task Scheduler to the stars apps in a simple way, but it does not work. Can someone tell me what I'm missing and guide me, please?

  Hello

  At one point, we provide only a particular program path to start using Task Scheduler. Create a Script to launch several programs at the same time.

  To create a script, I suggest that ask you your question in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en-us/categories/

• Add applications to start in Windows 8

  It is easy to disable applications to start at boot time.

  How can we add a background important App like Skype or WD Smartware for Apps that automatically start at boot time.

  Hello

  Press Windows key + R, type : Shell start, click OK.
  Now, drag and drop apps in the new window that opens. Reset to get results.
  Hope this helps, good luck :)

• Adobe Application Manager starts and I have to accept license again

  All of a sudden, I have to accept the license agreement again when starting my Adobe CC software (for example, Photoshop and Lightroom). Additionally, Adobe Application Manager start "in the background" when I start the software itself. And I'm out of the creative cloud.

  So I was wondering what happened. And more importantly; How can I solve this problem. It becomes quite boring.

  Please refer to:

  Software license contract reappears after clicking on accept

  Please ensure that you have the latest version of the installed Creative Cloud application

  http://helpx.Adobe.com/creative-cloud/release-note/CC-release-notes.html

  We also have the solution for him having to log on each product launch

  http://helpx.Adobe.com/creative-cloud/KB/unable-login-creative-cloud-248.html

  Alternatively, you can follow this:

  Please just place the file opm.db of origin on the desktop

  1. Output of creative cloud app.
  2. On Windows, delete the opm.db file located here: C:\Users\\AppData\Local\Adobe\OOBE
  3. On Mac, delete the opm.db file located here: \Library\Application Support\Adobe\OOBE
  4. Restart Creative Cloud connection and sign in.

  If you are still having problems please let us know.

  Concerning

  Baudier

• Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop

  Downloaded photoshop elements 12 ok installed and activated, it started and the start screen is displayed and the application is started then stop immediately.

  Repetition and crashes again. Help it does not start!

  Solved! Tried everything in support documents and none of it worked. Frustration massive Adobe Chat staff who knows nothing and just told me to look at the documents of support again and again. They also gave me a phone number in Australia which has a recorde d message saying that the product is not supported! What is everything?

  Finally Adobe technical support Anand called me (from when I have opened the original case of support which gave me the serial number).

  Just had to rename the file SLCache in c:\program (x 86) and again the EULA and reactive. Now everything works fine. Way to hard.

• Photo editing software Photoshop elements 12 crashes directly when the application is started. Do not download / no error message.

  Photo editing software Photoshop elements 12 crashes directly when the application is started.

  Do not download / no error message.

  My system: Windows 8.1

  All the drivers are up to date.

  Please can someone help me?

  I solved this problem by cleaning the folder C:\Program Files (x 86) \Common Files\Adobe\SLCache.

  Thanks Rave.

• Allow the application to start with one or multiple data sources, failing to connect?

  I have a Spring application that connects to several databases at the start, through JEE definitions referenced via JNDI datasource. Some of these databases sometimes go offline for various reasons. If the application is running at the time, it is not really dangerous, because of the way the application is designed. However, if I try to start the server if the database is offline, the application fails to deploy. Is it possible I can configure data sources not to block the deployment of the application if the database is offline or the application?

  Hello. You can ensure that your datasources WebLogic deployment, even if the DBMS (es)
  be down in time, specifying the initial capacity of each source of data/pool equal to zero.

• solution menu ex is not displayed when the application is started

  I reinstalled my drivers and Canon MG5320 software several times, and the Solution Menu EX nor the MP Navigator EX 5.0 screens appear with the starting of applications. I have no way to change the destination for my scanned image file.

  The solution I was looking for is described here: http://justinsmind.wordpress.com/2010/09/18/mp-navigator-ex-not-running-correctly-with-windows-7/

  The problem was a leftover Dell all in one folder in the twain_32 folder. After removing the old Dell files, properly installed Canon software.

  This looks like a problem faced by many users.

• Can I quit CTF Loader application to start the process?

  Norton Security Suite suggested that I have cut some Start Up processes to speed up my departure performance. I need to know if I can close the ctfmon.exe from Start Up?

  Hi MissTheresa99,

  You can remove ctfmon startup application. If you do not use any recognisation of speech, you can delete it in the process listed in the http://support.microsoft.com/kb/282599.

  I hope this helps.

• the media center on my xbox freezes when the invalid application "cannot start symaddin." How can I fix

  The media center app on my xbox 360 crashes when the application invalid "unable to launch symaddin" appears. How can I fix?

  Hi DaveHale,

  Check if Windows Media center computer is very well as expected?

  Method 1: I suggest to put the computer in a clean boot and check if still face you the problem of gel.

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Method 2: Disable your antivirus/firewall software temporarily and check if it is the problem of gel.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Sure to soon after troubleshooting is performed.

  Method 3: try the steps from the following link:

  When you use online media in Windows Media Center Extender on a video game Xbox 360 system, Media Center closes
  http://support.Microsoft.com/kb/934542

  Additional information:
  http://support.Xbox.com/en-us/Xbox-360/settings-and-initial-setup/clear-system-cache

  Tips to troubleshoot installation with Windows Media Center Extenders (Applies to Windows Vista)
   http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders#section_1

  If the steps above fail, then I suggest you to post:
  http://forums.Xbox.com/xbox_forums/community/default.aspx

• How to return to the previous screen on Pre apps? THETE´s no back button... just close the application and start over?

  for example with text messages once im in a conversation can how to return to the screen with all my converdations? It's the same with any of the apps, West no way to go back? should I always close the app and start again to go to the previous screen?

  You must not yet be aware of the gesture «back» It goes like this, the straight shot, left on the gesture area (the area below the screen, left and right of the Center button). You enter only at half way, and you can start on the right edge, or just left of the Center button.

  Become very familiar with this gesture he used all the time.

  There is also an option that you can activate by allowing a complete sweep in any direction will take you to the adjacent open card. I think that this gesture is set to off by default.

  Good luck.

  PS - In the application of Navigation of Sprint, I can't seem to leave the navigation once it starts. In other words, you must close the application and open again to define a new topic. I know two ways to issue the command to stop the navigation, but none of them work effectively.

  Message edited by Mrolesen on 21/06/2009 20:17

• SW2 - host App and Smart Connect different certificates. Host application cannot start.

  I had my 2 SmartWatch today and installed app Connect Smart and SmartWatch 2 since google play, got the smartwatch of pairing with my bluetooth phone manual connect.

  But in the notification bar I get "the application host and Smart Connect different certificates. Host App cannot start. "and I can't go settings on Smart Connect to the SW2.

  Please help, now I can't use the no apps smartwatch becouse...

  It's very strange, these files works fine for me in an S3.

  Would it be possible for you to make a backup of your phone then reset (or reinstall the software using Kies if possible), and then try again (before restoring the backup)?

• 64-bit applications not start or start and immediately close. Some produce such as cleanmgr.exe 0xc0000135 error code

  My Version of Windows is the 64-bit version of Windows Vista Edition Home Premium

  After a Microsoft Update for Windows Defender and a few other improvements of Vista security, my computer has rebooted and started running very, very slowly.  I went to reboot the computer again to receive an error message on a rolling stop and check that the drive should run.  After Check Disk, windows restarted again and brought me to my office.  I tried to open IE8 do pop open and close immediately.  After an investigation, I determined that all of my 64-bit applications no longer work, but all of my 32-bit versions.  Some applications ask me with an error with the code window in there, such as cleanmgr.exe 0xc0000135.

  I tried to start the disk check again during the computer startup process, but that did not fix the problem.

  I was not able to find decent advice online to help me.

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner