64-bit applications not start or start and immediately close. Some produce such as cleanmgr.exe 0xc0000135 error code
My Version of Windows is the 64-bit version of Windows Vista Edition Home Premium
After a Microsoft Update for Windows Defender and a few other improvements of Vista security, my computer has rebooted and started running very, very slowly. I went to reboot the computer again to receive an error message on a rolling stop and check that the drive should run. After Check Disk, windows restarted again and brought me to my office. I tried to open IE8 do pop open and close immediately. After an investigation, I determined that all of my 64-bit applications no longer work, but all of my 32-bit versions. Some applications ask me with an error with the code window in there, such as cleanmgr.exe 0xc0000135.
I tried to start the disk check again during the computer startup process, but that did not fix the problem.
I was not able to find decent advice online to help me.
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> or if you do not need an individual > right-click on > UAC prompt > hide it
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:
http://social.answers.Microsoft.com/forums/en-us/vistawu/threads
When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.
In this way, you will receive the best help.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Internet, not able to browse computers on the network
The computer has internet access, but I am not able to browse the network. The workstation services and control of browser will not start. The event log shows the workstation service terminated with error code 2250. Also in the event log Workstation reports: could not load RDR device driver. Cannot run the sfc in safemode, gives the 0x000006ba error, the rpc server is unavailable. Runs under normal windows, noticed in the registry last run: 0x000003e3 error code (try adding c:\windows\system32\drivesr\i81xnt5.sys to the dllcache)I'm puzzled.Hello
I suggest you to send your request in the below link.
http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads
-
Hi Apple/community,
I need a help.
What it means? Operation failed! My MacBook Pro does not start. It cuts after the loading screen. What will happen?
Any help will be greatly appreciated. Thank you!
Well, it seems that your MacBook Pro hard drive has failed and cannot be repaired by disk utility.
Try to reboot into single user mode: How to start your Mac in single user mode or verbose--Apple Support
If it works, try to repair the disk with this command:
fsck -fy
(http://osxdaily.com/2013/08/07/how-to-repair-a-mac-disk-with-fsck-from-single-us UH-mode /)
-
MSVCP100.dll error code
Hi FredSisk,
I suggest completely uninstall the program, restart the computer. Download and save the program on the desktop.
Diagnose and solve the program installation and uninstallation problems automatically
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
perform a clean boot.
Method 2
Once you download the program on the desktop, install the boot program.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: follow step 7 clean boot KB929135 article to reset the computer in normal mode. -
I'm using Photoshop CS4 on an iMac with OS Lepord of snow. Recently, I had to do a fresh install of the OS software, then brought back all my Apps, etc. back using Time Machine. My problem is that now, my Photoshop does not start and gives me a message to contact Technical Support with error # 150:30... What should I do now? @
You must click on this link 150:30 blue and start with message 11.
Don't forget to leave a space after sudo python before submitting the script.
Remember that you will not see your password when you enter it when calling to make.
-
Hi, I have a HP Pavilion dv4 Notebook PC, and I can't get my updates of windows to download anything. My BITS will not start.
-Processor: Intel (r) Core (TM) 2 Duo CPU
At 2.10 GHz, 2.10 GHz T6500
-Memory (RAM): 4.00 GB
-System type: 64-bit operating system
-Windows Vista Home Premium Edition
-Service Pack 2I have Webroot AntiVirus with Spy Sweeper and I recently downloaded the Malewarebytes Malware Anti.
Whenever I try to download an update for anything, be it Itunes, Windows Defender, Windows updates, updates to HP or Microsoft Updates, they do not always arrive.
When I go into the service menu & try to start BITS it comes up with this message:
Windows cannot start the Service on the Local computer's Background Intelligent Transfer
Error 126: The specified module is not found.When the updates of Windows fails to download updates, it comes up with the error Code: 80246008.
I tried to download on microsoft.com BITS Repair tool, but it is said that the tool is not necessary.
I really need someone to help me and to understand this point for me, it's happened now for about 3 months. When I bought the laptop I had Webroot AntiVirus with Spy Sweeper installed, and I just installed Malwarebytes' Anti Malware, a week ago.
Anyway, do the following:
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. click right on the file saved in # 1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.
4. click right on the file saved in # 1 b above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then reboot again.
5 test.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Application does not start and does not respond. Closed that it self.
Hi guys
I made a game for the BlackBerry using Flash Pro CS6 z10. I tried it in the Simulator and I installed it in a system z10.
To do this, I packed the bar and signed the app using the command line and I send the Simulator and the device with the HELP of graphics OS Tablet.
Everything works perfectly, in the SIM and the device... However, when I presented the game on the portal of the seller for review and approval, I had... "correct the following issues and resubmit your application as a new version."
I'm testing your app on the BlackBerry Z10. When I press the icon for your application, it does not start and does not respond. Closed by it self. » ...
Anyone know how to solve this problem or what can I do? (and why it's working ok for me and not them?)
Thank you very much!
OK, I downloaded your app and checked that it uses Stage3D (you renderMode value to indicate in the app.xml file). I tested it in point 10.2 and it works for me. When using the portal provider make sure you specify BlackBerry 10.2 or higher.
-
Installation of fuse will not start and I can't find it in the application of the CC.
Installation of fuse will not start and I can't find it in the application of the CC
Great!
You are welcome!
P.S. If you use the Adobe forums, please check useful/correct responses from the staff/helper, if there is.
-
Anyone know how to get your money back? My CC application does not start and I have tried the suggested workaround solutions listed above and they have not worked for me. I'm new to the CC Apps but use the versions installed for years. The amount of questions listed here in this forum, I have to ask the product is really stable?
Thank you. I've deleted and reinstalled. Seems to have solved the problem.
-
See my last reply vista updater windows Home premium service... BITS will not start the lack of files... iolo destroyed the index I fixed and ran updates, so I uninstalled iolo and it took some tips that i reinstalled the index but it doesn't start, said missing file probably out when I uninstalled iolo how can I reload those files. RUN SYSTEM UPDATE READINESS No. CHANGE of TOOL... now, I ran BITS Repair Tool for Windows Vista and it says that it is not necessary and that it does not run. !!!!!!!! still need help please, I ran it (not fixed) fix 7/30, and the file system Checker says there's no problems.
Hello
Glad to know that you were able to solve the problem. Your efforts are very much appreciated.
Reply back if you are having problems with Windows in the future. -
Hello
I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!
I tried to solve it using the steps suggested,
It's what you tried, if not, please do it might help
See if anything here helps.
Error 1079: the account specified for this service is different from the account specified for other services running in the same process
If you receive this error message, follow these steps:
1. Click Start, click Run, type services.mscand click OK
2. double-click on Background Intelligent Transfer Service.
3. click on the tab to open a session.
4. click Local System account and then click OK.
5. right click on Background Intelligent Transfer Service and then click Start.
0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed
because the download manager could not connect the smart Background
Transfer Service (BITS).
http://support.Microsoft.com/?kbid=910337>
You receive an error message when you try to download updates from the
Windows Update Web site or the Microsoft Update Web site, or when you
try to start the Background Intelligent Transfer Service 0 x 80246008
http://support.Microsoft.com/kb/916251>
An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer
http://support.Microsoft.com/kb/940520
13:06:42 UTC 08/26/11
-
BITS does not start Win7 64 (PA bear MS MVP)
Computer Toshiba laptop came with Win 7 Home 64 bit (currently version 6.1.7601) installed.
Free trial of Norton has been installed by regulation. I uninstalled Norton and used AVG free until earlier this year when I bought McAfee Total Protection (ver. 14.0.4113), which I use now and McAfee WebAdvisor (ver. 4.0.167) I have MalwareBytes, Version 2.1.6.1022, but only use it manually. No AdAware & SpyBot S & E. 15/08/2015, I bought speed difficulty Pro of FixBliss (version 2.9.8) tool that cleans my registry, among other things such as, I suspect, causes close the problem I ask because the installation date and issue dates are real.
I received the offer of Win10 and signed and waited. Time has come to do the Win10 update and it failed. Then I noticed that the last successful update was held on 12/08/2015 and it was MS Silverlight version 5.1.40728.0. All others since had failed. I started Googling for answers and BITS found has not started and Windows could not start the BITS of the Local computer and that I should look in the system event log. I also found that 'Terminal Services' was not at all.
I tried 2 different files MS support Fixit troubleshooting commands, but to no avail. Then I did the great thing to restore my system all the way back to 12/08/2015 and, of course, when the computer reboots, I got the Windows cannot start message - always a wonderful feeling when you get one. Well, I got up and running but still not start BITS so also cannot run earlier updates since 8/15 and, the big one, cannot be upgraded to Windows 10. I tried to include a lot of info that you seem to ask, what makes the question too long - sorry about that. Any ideas?
Hello
Please contact Microsoft Community.
I appreciate the efforts you have done to solve this problem. Please confirm some additional information to help you better:
What are the number of KB updates failed?
What is the exact error message associated with the updates failed?Meanwhile, I suggest you perform the above step and see if it helps.You will need to re of the registry files which you linked with the Background Intelligent Transfer Service, and then check if it works.(a) click Start, click Run, type regsvr32 qmgr.dll in the Open box, and then click OK.(b) click OK.(c) click Start, click Run, type regsvr32 qmgrprxy.dll in the Open box, and then click OK.(d) click OK.You receive an error message when you try to download the updates on the Windows Update Web site or the Microsoft Update Web site, or when you try to start the Background Intelligent Transfer Servicehttp://support.Microsoft.com/kb/916251
I hope this helps. Do not hesitate to contact again us for any further assistance.
Kind regards
Anusha
-
Creative cloud does not start and I can't re - install
I had problems with creative cloud, it does not start and I can't uninstall it because a prompt appears telling me I can't uninstall it because the programs use. I really need to get the latest update for Illustrator, because it also crashes without reason.
Help
Hi tsumera,
Try to uninstall the application office creative cloud through the cleaning tool
- Uninstall the https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html CC Adobe desktop application
If that doesn't help, please try the following steps to completely uninstall the creative cloud.
Remove the OOBE and AAMUpdater folders.
Mac OS:
1 leave the creative Cloud Desktop application
2 force quit Adobe all processes in the activity monitor (for example, CC, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)
3. navigate to \User\
\Library\Application Support\Adobe *. And/Library/Application Support / Adobe *.
To access the hidden user library folder, see library user access hidden files. Mac OS 10.7 and later.
4. search and delete the files AAMUpdater and OOBE
5 / Library/Application Support/Adobe (rename Adobe Application Manager and Adobe of joint office)
6. go > utilities > (rename Adobe Application Manager and creative cloud)
7 re - download creative-cloud
https://helpx.Adobe.com/creative-cloud/help/install-apps.html
Windows:
- Exit creative Cloud Desktop
- Force quit Adobe all processes from the Task Manager (e.g. cc, Core sync, the broker CC library, Office, Adobe, Adobe CPI, demon Adobe Crash etc..)
- Go to \Users\AppData\Local\Adobe\
And C:\Program Files (x 86) \Common Files\Adobe
C:\ProgramData\Adobe
- To view the AppData folder and program hidden data, see files, folders, file name extensions. Windows XP, Vista, Windows 7.
- Find and delete the files AAMUpdate and OOBE
- Download creative-cloud
https://helpx.Adobe.com/creative-cloud/help/install-apps.html
-
Win2k3 comments of 64-bit does not start on 64-bit Vista, processor E6700 with VT active host
I have a guest for Windows Server 2003 64-bit running on a 64-bit Vista with VMware Server 2.01 host. The host system has a CPU of Core2Duo Intel E6700 and VT is enabled in the BIOS. The guest has worked fine until this morning. Windows updates hit the host the next day and installed Microsoft lastest set of security patches and rebooted the host. Because then the host 64-bit does not start - I can get the BIOS on reviews, but Windows itself indicates that he doesn't see a 32-bit CPU and cannot load 64-bit operating system.
64-bit VMware compatibility checker, said that the host is 64-bit ready comments. I don't know if something is messed up in the comments or on the host? It's the only host 64-bit on the system, all the other guests are 32-bit and load very well.
-
Mac does not start and the fans going crazy
Computer does not start and the fans work hard and fast. Someone has an idea what is the problem and how can I solve this problem?
OLA I will try help EU tenho um macbook pro, mas esse problema não me it happened ainda EU acho seria o seu mac origem help esse problema pode formatar better.
SE nao tem'm ligar o seu osx para formatar use cmd + r e ligar pressionar cmd + r ele deve AI PODES ligar restore o seu novo osx.
Maybe you are looking for
-
Cannot transfer pictures for MacBook phone Virgin Mobile... Please help!
Please tell me how to transfer photos from MacBookAir at a cheap Virgin Mobile phone... tried several times and nothing happens. Is this possible? Thank you!
-
After the new OS installation my Tecra 8000 runs very slowly
I did a format and install windows Windows XP sp2 home edition on my Tecra 8000. Now, it is very slow to load the desktop. I missed the relocation of something?I don't have the right Windows XP Home edition, System Restore disc.
-
* Scan to * on Officejet L7555 all-in-one
The button scan to on the L7555 be able to invoke a scan without having to go to the selected computer, and then click Scan? I just installed the complete Version 14 software for this printer on your desktop Windows7 64 bit. Now, I see the new PC as
-
Legal copy of XP by saying that it is a version hacked, why does this happen?
I just tried to re - install my copy of XP Pro, as I have done many times. When it reaches the phone to allow bit he finished that my copy is illegal. It is only on a single machine, & I've never had a problem before so why now? Anyone has a clue as
-
I move my windows pc to windows 7 10 but its many problems. can I roll back to windows 7, my internet connection is always troubleshoot 'device or resource (web proxy) is not configured to accept connections on port "8080". First of all, I say I have