Application of the Stucks in the Blackberry Logo

Similar Questions

• My blackberry screen blackBerry smartphones is blocked in white with the blackberry logo

  Please help me. the screen of my blackberry is stuck with a white screen and the blackberry logo. I tried to take the battery, restart, but nothing works, it always goes back to the white screen with the logo. I also tried to download the Blackberry Desktop Manager, advice from other threads, but it won't let me download, error. I've been home for several hours now. Please I'm panicking, help...

  OK I just found a way. had to reinstall the operating system... BT, now everything is wiped clean from my bb. contacts, messages, app, everything is new. Well at least my phone is running again

• I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I have an iPad2 version 9.2.1 from the music application only the apple logo appears and nothing happens...

  I did a reboot, nothing has changed.

  so the music app is an application by default/standard, it cannot be removed or reloaded.

• Hide the Application in the management of the applications in the Blackberry

  I want to hide my Application in the management of Blackberry applications.

  Is this possible?

  How can I achieve this?

  I guess you mean that when the user goes to the Option of Application Management on the device, he or she will not see your app in the list?

  If so, then the answer is it is not possible to hide your app in the list.

• How - to add options for application to the BlackBerry Options

  I generated the example "How - to add application options to the BlackBerry Options" of the knowledge base and run it on a Pearl Flip but I don't see any new added options. I could be looking in the wrong place, but I thought that the sample adds "Options Sample" to the list of options.

  No one knows where to look for the new option added by this example?

  I went back and Setup another entry point recompiled and still can't find where is the new option.

  Thanks Mark. That makes perfect sense as the mail app needs to retrieve incoming messages at any time.

  I've updated my code to close to the bottom of my library of applications by programming, I added a menu too. Is better to be sure that the library is closed and ready for the next event to use it.

• Applications of the blackBerry Smartphones home screen

  I lost my messages, e-mail messages, applications of volume control on my homescreen. I pressed menu and they are gone as well.

  How can I get them back, and how can I make sure that I can not lose them again?

  In the menu, I also lost my icon to respond to text messages

  Someone please help?

  On your home screen, press Menu > SHOW ALL and make these icons have been hidden, or accidentally moved to a folder. Check them all.

  If still nothing, go to options > advanced > Houst Routing Table > Menu > register.

  With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

  A little luck?

• Is it Possible craate an application or an application with the oracle logo screen when we launch an app

  Hello

  I am new to Oracle MAF

  Can anbody tell me how to remove the oracle logo screen when we launch an application

  Thank you in advance

  Concerning

  Vincent

  Hello.

  The start screen is determined by the deployment of the application profile settings. To replace the default splash screen, you will need to produce a series of files PNG of different sizes and pixel density. The real needs of these files are explained in this section of the documentation of the MAF: http://docs.oracle.com/middleware/maf210/mobile/develop-maf/maf-deploying.htm#ADFMF927

  Once you have produced the images, simply copy you them to the appropriate resources from the application folder, subfolder and select in the "Images of the Application" section of the profile of the deployment, as shown here.

  

  Best regards

  Frédéric Desbiens

  Senior Product Manager

  Mobility and Cloud oracle

  Twitter: @BlueberryCoder

  blog: http://blogs.oracle.com/blueberry

• Installation of Applications on the Blackberry via desktop software

  Hi all

  I'm a beginner and it is difficult to download my application on a blackberry phone (I tried the torch and "BOLD" phones) via the desktop software so that I can test it on the phone. I followed the tutorial on:http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Guide-to-installing-applications-on-t... but I get errors when I try to import files (files .alx and .cod files generate errors) and I don't know if the article is obsolete because it refers to Desktop Manager and Application Loader, which I assume is older versions of software.

  The steps that follow are:

  (1) connect my bb via the usb phone and open the desktop software

  (2) once connected, click on the Applications tab

  3) click Import files

  (4) search for the actual file (tried with files .alx and .cod files) on my filesystem (my computer)

  (5) and I select open to import the file (tried the .alx and .cod files also)

  Error message is: "there was an error importing files. No additional applications can be found. "Your file may contain applications that already exist in the list of applications, are not compatible for your device or errors.

  I certainly know that the application has no errors because it's the standard helloworldtheme that comes with the plugin for eclipse bb. I also know that the application does not already exist in my application list. I don't know how to check if the application is compatible with my device, but I have a feeling that is not the problem.

  I'm surprised how hard something that seems so simple doesn't seem to work.

  I would appreciate any help or someone who can point me in the right direction to do so.

  Thanks in advance...

  I found the solution and no thanks to the community does not help this.

  Pls contact me for the solution if you have the same problem

• Firewall and the blackberry application incompatible behavior

  I have problems with the deployed application and the blackberry firewall.

  The application uses any no API 'secured '.

  On the BlackBerry, this app generates a warning whenever it attempts to open a connection file and whenever it opens a web connection.

  However, we noticed that when we ACTIVATE the blackberry on the device firewall, gain of warning messages a checkbox to permenantly overlook the warnings.

  We decided to deploy the application as well as instructions on the activation of the firewall.

  Here comes inconsistency. Some users report that they see absolutely no problems while others say that the firewall is shaken other applications on their devices. Finally, some users are telling us, the application does not launch. Nothing... size of firewall configuration.

  It is deployed on blackberry:

  various models of curve

  tour

  Storm 1 & 2

  various models of pearls

  I found no good documentation on the blackberry firewall, API permissions, or warning messages that my application get boring.

  The application is not signed.

  I don't want to pay for the signing key, unless them are guaranteed to solve problems.

  Signature of the request will eliminate the constant harranging.

  You should get a single guest with "do not ask me this again" checkbox.

• Services of the Blackberry Smartphones blackBerry works does not (BBM, email)

  Hello

  I have a Blackberry Curve 9630 and for nearly two weeks, nor the services polls bbm or email to my phone worked, and the BlackBerry logo that happens usually when it is connected to wifi or 3 G is nowhere to be seen. I tried pulling on my battery, restart, change of sim cards, logging in and out of my blackberry ID account and still nothing. I checked with my network provider that blackberry is always on, nothing. I had a look at several other positions and all the advice and tried to register my device (following this link: http://btsc.webapps.blackberry.com/btsc/viewdocument.do?externalId=KB00510&sliceId=2&cmd=displayKC&d... still nothing, I get no message registration.)

  Is there anything else I can do?

  Thank you very much

  S.

  On connection management screen, click on the State of Services.
  What is the status of the BlackBerry Internet Service?

  If it is "not connected", then you need to call Virgin and to confirm that your SIM card is always configured with the BlackBerry BIS data Plan.

• Can be running/debugging AIR apps USB bby on the BlackBerry phone for the smartphone device? No Tablet

  Hi, I would like to know if we can test and run USB AIR applications on the blackberry smartphone to feature as the Torch 9860 with software like Flash builder?
  Any success?

  AIR is only supported under devices PlayBook and BB10.

• deploy the application on the Simulator console

  Hello

  I want to deploy my application on the BB Simulator without going through Eclipse. In more detail:

  -from the emulator in debug mode (with the correct settings)

  -deploy the application in the emulator

  -redirect all output to the console for debugging.

  Could someone illustrate how to perform this procedure in my console windows?

  Thank you

  You can deploy an application for the BlackBerry Smartphone Simulator by copying the file of cod to the directory of the Simulator.  The Simulator does not support redirection of its debug output to an arbitrary location, however you can use the tool, JDWP included with JDE BlackBerry and BlackBerry JDE component Package to view this output outside Eclipse or the JDE.

  Download the BlackBerry JDE or BlackBerry JDE component Package

  http://NA.BlackBerry.com/eng/developers/javaappdev/javadevenv.jsp

• How to remove the app from the blackberry with programming

  Hello

  I have a blackberry application that works properly when I installled that application I get not all delete option in option > advanced > application.

  Please help me to provide the solution for the removal of the application of the option > advanced options > application.

  I want this because I want to uplaod the application to the blackberry app world.

  Concerning

  Antoine Singh

  Hello

  Please follow the update here class

  import net.rim.device.api.system.ApplicationDescriptor;
  import net.rim.device.api.system.CodeModuleManager;
  import net.rim.device.api.ui.MenuItem;
  import net.rim.device.api.ui.UiApplication;
  import net.rim.device.api.ui.component.Dialog;
  
  public class UserInterface extends UiApplication{
  
      UserInterface()
      {
          Test1 t=new Test1();
          pushScreen(t);
      }
      public static void main(String args[])
      {
          UserInterface app=new UserInterface();
          app.enterEventDispatcher();
      }
      private MenuItem _deleteeMenu = new MenuItem("Delete Tool", 110, 10) {
          // Delete us
          public void run() {
              int actionCode = Dialog.ask("Confirm Deletion",
                      new String [] { "Continue", "Cancel" },
                      new int [] { 0, 1 }, 0);
              if ( actionCode == 0 ) {
                  ApplicationDescriptor ad = ApplicationDescriptor.currentApplicationDescriptor();
                  int moduleHandle = ad.getModuleHandle();
                  int rc = CodeModuleManager.deleteModuleEx(moduleHandle, true);
                  String tellUserMessage = "";
                  if ( rc == CodeModuleManager.CMM_OK_MODULE_MARKED_FOR_DELETION )
                  { CodeModuleManager.promptForResetIfRequired();
                  tellUserMessage = "Please restart the device to remove the application"; } else
                      //              if ( rc == CodeModuleManager.CMM_OK_MODULE_MARKED_FOR_DELETION ) {
                      //                  tellUserMessage = "Please restart the device to remove the application";
                      //              } else
                      if ( rc == CodeModuleManager.CMM_OK ) {
                          tellUserMessage = "Deleted";
                      } else {
                          String errorString = Integer.toString(rc);
                          switch (rc) {
                          case CodeModuleManager.CMM_OK_MODULE_MARKED_FOR_DELETION:
                              tellUserMessage = "Will be deleted on restart";
                              break;
                          case CodeModuleManager.CMM_MODULE_IN_USE:
                          case CodeModuleManager.CMM_MODULE_IN_USE_BY_PERSISTENT_STORE:
                              tellUserMessage = "Module In Use";
                              break;
                          case CodeModuleManager.CMM_HANDLE_INVALID:
                              tellUserMessage = "Invalid Handle";
                              break;
                          case CodeModuleManager.CMM_MODULE_REQUIRED:
                              tellUserMessage = "Module Required";
                              break;
                          default:
                              tellUserMessage = Integer.toString(rc);
                              break;
                          }
                          tellUserMessage = "Error Deleting Module: " + tellUserMessage;
                      }
                  Dialog.alert(tellUserMessage);
              }
          }
      };
  }
  

  If you want to get the option delete in options > advanced options > application.use the code above.

  Concerning

  Antoine SIngh

• BlackBerry Smartphones BlackBerry Desktop Software could not validate your update to the BlackBerry device...

  Hello. I had my blackberry for a little over a year. It's a Bold 9650. After I have updated to OS 6, everything was going fine except for the fact that I have lost password Mole and Brick Breaker. Small problems, I know. But when the day consists of a lot of waiting around, believe me, these two helps. in any case, I looked on various forum how to recover them and more expected to open the Fund Manager and go to the list of applications and simply check out these two games and to update. I did that, but when I went to update, I had to wait a while because he loaded [yes I use a mac], and then this message pop up would be "BlackBerry Desktop Software doesn't have to validate your device BlackBerry - abandonment update install due to failure of the validation.» Some packages contained unsatisfactory dependencies. "So now I can't update my phone at all with anything. What can I do to solve this problem without doing a full cleaning [which I don't know how do either, I see a lot of people talking about it]? I just want to be able to update my phone.

  Hey acabungc,

  Welcome to the community of BlackBerry Support Forums.

  This error is caused by a third-party application on the BlackBerry. This application will need to be removed and then you can re-installed games.

  To find out which application is causing the problem go to/Library/Application Support / BlackBerryDesktop / Logs and open the daily log on the Mac.

  And you will find a line in the newspaper that said: abandonment of the install because of unmet dependencies for packages: ((Application name))

  That lists the name of the application.  Then you can remove this application from BlackBerry.  Let me know if you have any other questions.

• iMac 8.1 stuck on the apple logo

  Model: iMac8, 1

  2.66 GHz Intel Core 2 Duo

  At 2BG memory when the problem started

  Mountain Lion 10.8.5

  Is in trouble with occasional frosts. Would be closed and it should restart very well. About 2 weeks ago, the computer froze. I shut down the computer and restarted. The apple logo came with the spinning wheel, and then just the apple logo.

  I can start safe mode. Tried resetting the PRAM, reset of SCM. Tried to start with all peripherals except keyboard and mouse disconnected. Use the command R to start the computer and went into the disc utilities. Disc checked and it said disc looks OK. Verified permissions. Mistakes came for iTunes more a warning which was not repairable. Fixed permissions. None of these permits to start properly.

  Parle talked anyone computer repair who suggested to unplug the computer, hold the power button while up to one minute, plug the computer back in and pressing the Start button. It came in fine. A few days letter that the computer froze and I had to stop it. You press the Start button, got the spinning wheel, so only the apple logo and apple logo. Start the computer by pressing command + R and reinstalled Mountain Lion. Installation once it stuck at the apple logo again. Active disk. Drive seems to be OK. Permission verified. Permission with iTunes but issues no warning this time. Repaired permissions. Nada.

  Inserted the installation disk, turned on the computer while holding D key. A ran Apple Hardware tools (tests of short or long). This error message came up twice with different numbers of rpm: 4MOT/1/40000003: drive HARD-110. I know that it's the hard drive fan. Computer repair man came out. Thought problem may be because I only had 2 GB of memory and ran only to open the Lion of mountain with several programs. Upgrade to 4 GB memory, which is recognized by the computer. But the computer still does not start correctly. Tried the Single Mode and run/sbin/fsck - fy. Said it seemed OK, but changed the volume. Ran he says once again and everything seemed OK. Still will not start.

  When I start in the disc, part of the grey background Utilities is missing. If you move the cursor on the screen, the gray background fills.

  Also, when I try from normally I get startup chime, the apple logo and the spinning wheel. After that make a spin the wheel stops, there is sort of a Flash, then the wheel goes and remains the apple logo. I can hear the computer tries to do something, then the arrow cursor appears and can be moved around the screen. It's like that.

  Also installed Mountain Lion on a USB key, it made the startup disk and tried to start the computer normally. Still will not start.

  Any ideas or suggestions for what could be wrong or other things to try?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.