application of vision on movies

Similar Questions

• Installing the software on cRIO for Application of Vision

  Hello people, OR

  I'm working on a vision cRIO-9082 real-time application that uses. I installed Labview Professional 2011 on my host (default Installation) and configured my cRIO in MAX.  The most recent site NI OR-RIO 12.0.1 pilots were intalled on my cRIO.

  I decided to start dumping a small application on my cRIO as suggested in the document below

  http://www.NI.com/white-paper/10867/en#toc2

  through this document, as shown in step 2, I do not have Born no matter what server OR-IMAQ or NOR-IMAQdx RT on my cRIO. I called SUPPORT and they advised to reinstall the development vision with custom module by selecting these two drivers. But during the installation I found no option to select these determinants of the RT.

  Are these drivers for real-time vision applications are already included in my NOR-RIO 12.0.1 or do I still need to install separately? I did not camera ethernet at the moment to check if crio works or not. In the license manager I see LabVIEW RT is installed and enabled

  My cRIO is ready for dumping a program and vision applications?

  Host: LabVIEW Professional 2011 SP1 development system

  Target: cRIO-9082 with NOR-RIO 12.0.1

  Concerning

  Neo

  Yes, that's what I thought.

  You have the recommended software stack (RSS) installed - you will see the mention of "modules" when using an RSS feed.  You must perform a custom installation that the document you specified.  When you go to install the software in MAX, on the FIRST SCREEN EVERYTHING (after the launch of the software installation wizard), you are presented with a number of options - you probably just click on ' NI RIO 12.0 - November 2012 "by default because it has a Ribbon of gold next to him.  Don't, don't.  Click on "custom software".  You will get then a word of setting warning something like: ' don't do that if you know what you are doing "-If you don't get the warning, you know that you are not right.

  Once you cross, LabVIEW Real-time and so on probably will be selected (as you have installed an RSS feed), but the options of your choice (that is, the components of the Vision) will be visible.

  -Danny

• Application window "minimized" and moves to the main screen when the screen saver is activated

  I'm under that WinVista Home Premium on an Intel based HP Pavilion.  I just upgraded (reluctantly) to IE 9 for IE 8 and as always seems inevitable, I'm having some problems with it.  Since that and I do not see how this is related to Internet Explorer, but when my screensaver active it causes open windows, Internet Explorer, MS Office and even my browser window Google Chrome to limit the size of the window.  I'm also using two monitors, and since the upgrade now open windows are moved my secondary monitor to the primary.  Before the upgrade to Internet Explorer, minimiseraient only windows MS Office (Excel, Word, etc.), no other applications, but they did not move to my main monitor.  They remained where I had them.  It's really annoying me and I can't locate any information on it.  The 'help' integrated within the Office is as useless as always.  I get closer really all that stuff from Microsoft of bagging and goes 100% with Google apps for eliminating my headaches.  It's my last ditch in order to get help from Microsoft.  I can not just take the frustration more.  I hope that someone out there cares enough and could have a resolution for me.  It would really make my week.

  Thank you in advance!

  Hello

  Method 1:
  You can try a clean boot and check if it helps:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  After the shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 2:

  It could also be a problem of display driver, then I would tell their driver you to update on the manufacturer's Web site.
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Production and Application of Vision to instala on machie even

  Hello
  
  I plant Production Oracle Application R12.0.4 database on the Linux machine and it works fine.
  
  Q - 1) can I install Oracle Application R12.0.4 Vision of database on the same machine?
  Q - 2) can demand production and vision upwards at the same time and the access client?
  Q - 3) is an additional step for installation of the Application and the Vision on the same machine?
  
  Kind regards
  Junaid
  
  Published by: junaid_nbs on June 11, 2009 02:09

  Hello

  Q - 1) can I install Oracle Application R12.0.4 Vision of database on the same machine?
  Q - 2) can demand production and vision upwards at the same time and the access client?

  All the foregoing is possible if you use a different port for each instance pool, there will be no conflict in the access of ports.

  Q - 3) is an additional step for installation of the Application and the Vision on the same machine?

  No additional steps are required; you just run quickly to install twice and each time using a different path for the database/application files and the pool of different port.

  Kind regards
  Hussein

• Made the first time a book in fotos after opening link was closed. It was frustrating. Update you the photos or the following one I have to do I will do more with this useless application. Can not move sides when necessary.

  Simply, when you will inform fotos to the standard opening provided? You cannot move pages, you cannot mark unique pictures for some reason any. The stability of the screen is terrible. A slight movement with the mouse wipe the screen pages. You can not delete images out of the bottom line. Please reactivate Aperture. All the books were better as well.

  You are absolutely right - Photos has a long way to go to be as versatile as Aperture, but you overlooked some features that are really there.

  To move pages are like this: https://help.apple.com/photos/mac/1.0/?lang=en#/pht6e15c151

  • Move a page in a book: rest the pointer over a page number until the page button, and then drag the button on the page to move the page to a new location. You can also select a page, and then drag the button to the page.

  • Remove a photo from a page or area of the Photos: click on the picture to select it, and then press DELETE.

  Please send this feedback to Apple.    Apple - Photos - comments

  We are users like you, so it is preferable to use channels provided feedback.

  You can print your opening using Photo Presto books: How to print opening books after the Print Services have been discontinued

• creating applications with control of movement

  I created a program that uses the control of the movement and the digital I/o card PCI-7344 Motion Control.
  It works fine in the LabVIEW environment but do not know does not any action that uses the card of the motion.

  I'm not creating an installer for the program and I am trying to run it on the same machine that has the development environment.

  The only thing I can think is that I'm feeding a definition of the vi of Controller.flx name is initialized.  Maybe he needs a path?

  I forget something obvious?

  Thank you
  Charlie

  Hi Ryan,

  It is now resolved, in fact...  It turned out that I needed to add the following to the labview.ini:

  BldApp.RemovePolyVIsandTypedefs = False

  Thank you!

  Charlie

• Deploy application with GlassFish-JavaEE, move from Mac to Linux.

  On a Mac, I developed and managed a Java EE application successfully.

  It's an EAR with an EJB module and a Web module.

  Now continues on a device of Linux (Ubuntu), I can't start over exactly the same application. I got exacttly the same code with git.

  
  

  I tried to launch the application with:

  <

  asadmin deploy ejbEntities/target/ejbEntities-1.0-SNAPSHOT.jar

  >

  the console of administration in the r through http://localhost:4848:

  Applications /-> deploy snapshot.jar selection...

  
  

  And with Netbeans with all the same result:

  After generating with dependencies and running.

  He tells his running successfully. But in services server/glassfish Server/applications/nothing is displayed and the output is the server.log:

  <

  An exception occurred while loading the application: the EJB container initialization error

  com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Invalid destination jms/NewMessage for MDB: JNDI name not found

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:2269)

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.updateMDBRuntimeInfo(ActiveJmsResourceAdapter.java:2095)

  at com.sun.enterprise.connectors.inbound.ConnectorMessageBeanClient.setup(ConnectorMessageBeanClient.java:168)

  to org.glassfish.ejb.mdb.MessageBeanContainer. < init > (MessageBeanContainer.java:252)

  at org.glassfish.ejb.mdb.MessageBeanContainerFactory.createContainer(MessageBeanContainerFactory.java:63)

  at org.glassfish.ejb.startup.EjbApplication.loadContainers(EjbApplication.java:221)

  at org.glassfish.ejb.startup.EjbDeployer.load(EjbDeployer.java:291)

  at org.glassfish.ejb.startup.EjbDeployer.load(EjbDeployer.java:99)

  at org.glassfish.internal.data.ModuleInfo.load (ModuleInfo.java:206)

  at org.glassfish.internal.data.ApplicationInfo.load(ApplicationInfo.java:313)

  at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:496)

  at com.sun.enterprise.v3.server.ApplicationLifecycle.deploy(ApplicationLifecycle.java:219)

  at org.glassfish.deployment.admin.DeployCommand.execute(DeployCommand.java:491)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ $2 1.run(CommandRunnerImpl.java:539)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ $2 1.run(CommandRunnerImpl.java:535)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:360)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 2.execute(CommandRunnerImpl.java:534)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 3.run(CommandRunnerImpl.java:565)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ 3.run(CommandRunnerImpl.java:557)

  at java.security.AccessController.doPrivileged (Native Method)

  at javax.security.auth.Subject.doAs(Subject.java:360)

  at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:556)

  at com.sun.enterprise.v3.admin.CommandRunnerImpl.doCommand(CommandRunnerImpl.java:1464)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl.access$ 1300 (CommandRunnerImpl.java:109)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ ExecutionContext.execute (CommandRunnerImpl.java:1846)

  to com.sun.enterprise.v3.admin.CommandRunnerImpl$ ExecutionContext.execute (CommandRunnerImpl.java:1722)

  at org.glassfish.admin.rest.resources.admin.CommandResource.executeCommand(CommandResource.java:404)

  at org.glassfish.admin.rest.resources.admin.CommandResource.execCommandSimpInMultOut(CommandResource.java:234)

  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)

  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62)

  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)

  at java.lang.reflect.Method.invoke(Method.java:497)

  to org.glassfish.jersey.server.model.internal.ResourceMethodInvocationHandlerFactory$ 1.invoke(ResourceMethodInvocationHandlerFactory.java:81)

  to org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher$ 1.run(AbstractJavaResourceMethodDispatcher.java:151)

  at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.invoke(AbstractJavaResourceMethodDispatcher.java:171)

  to org.glassfish.jersey.server.model.internal.JavaResourceMethodDispatcherProvider$ ResponseOutInvoker.doDispatch (JavaResourceMethodDispatcherProvider.java:152)

  at org.glassfish.jersey.server.model.internal.AbstractJavaResourceMethodDispatcher.dispatch(AbstractJavaResourceMethodDispatcher.java:104)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.invoke(ResourceMethodInvoker.java:387)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:331)

  at org.glassfish.jersey.server.model.ResourceMethodInvoker.apply(ResourceMethodInvoker.java:103)

  to org.glassfish.jersey.server.ServerRuntime$ 1.run(ServerRuntime.java:271)

  to org.glassfish.jersey.internal.Errors$ 1.call(Errors.java:271)

  to org.glassfish.jersey.internal.Errors$ 1.call(Errors.java:267)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:315)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:297)

  at org.glassfish.jersey.internal.Errors.process(Errors.java:267)

  at org.glassfish.jersey.process.internal.RequestScope.runInScope(RequestScope.java:297)

  at org.glassfish.jersey.server.ServerRuntime.process(ServerRuntime.java:254)

  at org.glassfish.jersey.server.ApplicationHandler.handle(ApplicationHandler.java:1028)

  at org.glassfish.jersey.grizzly2.httpserver.GrizzlyHttpContainer.service(GrizzlyHttpContainer.java:365)

  to org.glassfish.admin.rest.adapter.JerseyContainerCommandService$ 3.service(JerseyContainerCommandService.java:173)

  at org.glassfish.admin.rest.adapter.RestAdapter.service(RestAdapter.java:179)

  to com.sun.enterprise.v3.services.impl.ContainerMapper$ HttpHandlerCallable.call (ContainerMapper.java:459)

  at com.sun.enterprise.v3.services.impl.ContainerMapper.service(ContainerMapper.java:167)

  at org.glassfish.grizzly.http.server.HttpHandler.runService(HttpHandler.java:201)

  at org.glassfish.grizzly.http.server.HttpHandler.doHandle(HttpHandler.java:175)

  at org.glassfish.grizzly.http.server.HttpServerFilter.handleRead(HttpServerFilter.java:235)

  to org.glassfish.grizzly.filterchain.ExecutorResolver$ 9.execute(ExecutorResolver.java:119)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeFilter(DefaultFilterChain.java:284)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.executeChainPart(DefaultFilterChain.java:201)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.execute(DefaultFilterChain.java:133)

  at org.glassfish.grizzly.filterchain.DefaultFilterChain.process(DefaultFilterChain.java:112)

  at org.glassfish.grizzly.ProcessorExecutor.execute(ProcessorExecutor.java:77)

  at org.glassfish.grizzly.nio.transport.TCPNIOTransport.fireIOEvent(TCPNIOTransport.java:561)

  at org.glassfish.grizzly.strategies.AbstractIOStrategy.fireIOEvent(AbstractIOStrategy.java:112)

  at org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.run0(WorkerThreadIOStrategy.java:117)

  in org.glassfish.grizzly.strategies.WorkerThreadIOStrategy.access$ 100 (WorkerThreadIOStrategy.java:56)

  to org.glassfish.grizzly.strategies.WorkerThreadIOStrategy$ WorkerThreadRunnable.run (WorkerThreadIOStrategy.java:137)

  to org.glassfish.grizzly.threadpool.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:565)

  to org.glassfish.grizzly.threadpool.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:545)

  at java.lang.Thread.run(Thread.java:745)

  Caused by: com.sun.appserv.connectors.internal.api.ConnectorRuntimeException: Invalid destination jms/NewMessage for MDB: JNDI name not found

  at com.sun.enterprise.connectors.jms.system.ActiveJmsResourceAdapter.getPhysicalDestinationFromConfiguration(ActiveJmsResourceAdapter.java:2263)

  ... more than 71

  ]]

  [2015-06 - 01 T 15: 15:19.286 - 0200] [glassfish 4.1] [INFO] [] [org.glassfish.admingui] [tid: _ThreadID = 130 _ThreadName = admin-listener (6)] [timeMillis: 1433164519286] [levelValue: 800] []

  Redirecting to /common/index.jsf]]

  [2015-06 - 01 T 15: 15:19.301 - 0200] [glassfish 4.1] [INFO] [] [org.glassfish.admingui] [tid: _ThreadID = 132 _ThreadName = admin-listener (8)] [timeMillis: 1433164519301] [levelValue: 800] []

  [[Administration console: initializing attributes Session...]]

  >

  What could be the problem? The app has not changed, it is the environment.

  
  

  After that Googling autour, I found the problem had to do with the syntax.

  
  

  For example, on:

  http://StackOverflow.com/questions/7110563/GlassFish-v3-cant-deploy-MessageDriven-bean-missing-destination-JNDI-name

  
  

  I got the same error. The problem was:

  @ActivationConfigProperty (propertyName = "destination", propertyValue = "jms/SampleTopic")

  This need to be

  @ActivationConfigProperty (propertyName = "destination", propertyValue = "SampleTopic")

  
  

  Can whe´re I set this property?

  Whe´re is the configuration file of Glassfish?

  
  

  Could someone guide me through this?

  
  

  Thanks in advance.

  
  

  Peter,

  I found the domain.xml file. ~/glassfish4/GlassFish/domains/Domain1/config/domain.XML

  In this file, I wasn't able to find anything on the com.sun.appserv. *. packages.

  The software allows to work with this default file (on a Mac).

  With the asadmin terminal I tried to add custom resources.

  And they appear whe. After you restart glassfish no different result.

  The application deployment guide https://glassfish.java.net/docs/4.0/application-deployment-guide.pdf mentionned on glassfish ejb - jar.xml and ejb - jar.xml.

  I couldn't find these files for version 3.1.

  http://docs.Oracle.com/CD/E26576_01/doc.312/e24929/dd-files.htm#GSDPG00080

  But the app was capable on running with the default settings, so without these files.

  What can I check next?

• How to move from one screen to the other applications?

  In order to organize some screens after installing several applications, how can we move them from one screen to the other?
  I found it possible to place them in the bottom bar and then replace them in the necessary form, but it is very slow...
  Another way?

  Also, is it possible to place the apps where we want to and not automatically bring reorganized (empty filled)?
  Thank you

  DUPE: https://support.mozilla.org/en-US/forums/firefox-os-english-forum/709563

• Need urgent help! In my Vision Application, how to extract the parameters of the geometric model specified curve was generated by the template editor OR?

  I have an application of machine vision, in which the geometric pattern match technique was used to find the target in the images of type variant.

  as we know, we do a geometric model by model OR editor in the editor we can adjust the parameters of the curve specified settings to get the desired curves and we derive the custom box to ignore during the match. then we save the use of the same model in our application of vision.

  Now my question is coming. When I program my request for the geometric game. I have specified the parameters of the curve for the entrance of the IMAQ Advanced Setup learn ringtone 2, of course, I have to adjust this identical to the model, but I don't know how we extract the geometric model. I tried all the methods, for example, I can read data custom, IMAQ get characteristics of the geometric model(it's just for the basic functionality? so is there even a VI based edge?), even at anasys PNG file formats! But I can't read the info of the geometric model by myself!

  It is also illogical to adjust the CURVE SETTINGS manually again for the " IMAQ Advanced Setup Learn Pattern 2" after that I already have in the template editor OR!

  Hello

  Why do you need to specify the curve settings once again, if you have already built a model using the template editor? You don't need to use "IMAQ Advanced Setup learn geometric model 2 VI" to find games (see the attached example).

  You can wire the 'curve settings' control to 'IMAQ configuration geometrical game model 2 VI', but the values are not used if wire you a Boolean true to the node "use learning curve settings" (it's like that by default). To prove it, I enclose a small program with pre-created model (using the template editor) for a geometrical alignment. The model and the test of three images are also included.

  Try changing the settings of the curve with the 'use know curve settings' enabled, and you will see the corresponding score remains the same. Disable the Boolean control, then try to change the curve settings.

  Also take a look at the detailed help for "IMAQ configuration geometrical game model 2 VI", specifically the "learning curve parameters of use."

  I hope this helps.

  Best regards

  K

• Streaming movies

  IT seems that the movies on my iPad application broadcasts only effectively movies when connected to a wifi network of 5g.  However, I can stream movies through Vudu connected on any wifi network.  Is there a problem? Is there a fix in the works?  Disappointing that Vudu would work better than IOS app movies.

  The video application iOS is not an application "streaming".

  Although it may seem like that, iTunes content has download really content to your iDevice/s that you look at the previous downloaded data.

  Depending on how fast your download speed is, you may be affected by problems of buffering during the download of video/film content while you try to watch the previous contents of the loading.

  It is better to leave some of the video/movie download content, first, to stay in front of the data which are still download on your iDevice, then start watching the video or film.

  I just, in general, expect that any video or movie downloads completely to my iPad/s before you start watching.

  Good luck!

• AppleScript to move files that are old &gt; 30 days

  Hi, I'm looking for a folder action script to move files that are older than 30 days of my 'NEW' file to: files volumes, NEW to my 'OLD' files folder: files/volumes/OLD folder.  I searched and found only the scripts to remove old files using the 'update' for the files info. Any help is appreciated.

  Use code such as:

  Tell application "Finder".

  Move all the files in the folder "files: new ' with less than (current date) - the date of change (30 * days) to the folder" files: old.

  tell the end

  (143820)

• BakerlessPillowwork in the Application Support folder

  I went looking for suspicious files after clicking a download link shaded and found this in my root (?) Record of Support request. Mention this because otherwise I would have thought it was a new file placed by an update, but I have not updated my OSX in awhile

  

  Inside the BakerlessPillowworks folder is an application of process simply called 'agent' and .plist files.

  

  

  I force quit on the process of 'agent' in the activity monitor and put the folder in the trash on a case where (are not empty, but I think that all signs point to him having to be removed)

  I found nothing else on this file for my bets are that it is new, but I hope that someone else could have seen or have a better idea of what it is or what to do.

  Thank you in advance, I made an account just for this post

  Do not use any type of product, "anti-virus" or "anti-malware" on a Mac. It is never necessary for her, and relying on it for protection makes you more vulnerable to attacks, not less.

  You may have installed one or more variants of the Trojan 'InstallMac '. Please take the following steps to disable.

  The criminal behind this attack tries to make the malware difficult to remove by varying names of the files it installs. This procedure works now, I know. It will not work in the future. Anyone finding this comment a couple of days or more after it was published should look for a more recent discussion, or start a new one.

  Back up all data before proceeding.

  1 triple - click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  ~/Library/LaunchAgents

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return. A folder named "LaunchAgents" opens.

  Press command-2 key combination to select the display of the list, if it is not already selected.

  There should be a column in the update Finder window. Click on this title to sort the content by date. This will make the related files easy to identify regardless of their names, because they will have the same modification date.

  2A inside of the folder that you just opened, there may be files with the name of all these forms:

  something. AppRemoval.plist

  Something.download.plist

  Something.ltvbit.plist

  Something.notification.plist

  Something.Update.plist

  Here, something is usually an empty string of sense, for example one of the following:

  Epolife

  InstallMac

  Javeview

  Kuklorest

  Manroling

  Otwexplain

  Here are examples, not a comprehensive list. The chain could be anything, and there might be more value of something. Looking for a group of files with the same date of change who match the description.

  Lately, the striker of "InstallMac" a were quick strings 'AppRemoval', 'download', 'ltvbit' and 'update' in the names of its records. For example, you might see file names such as these, instead of the above:

  something. AppVemoral.plist

  Something.dolnwoad.plist

  Something.btvlit.plist

  Something.uadpte.plist

  You may have more than one copy of the malware, with different values of something.

  Place all of these in the trash. If there are other files whose name begins with something, those in the trash also move. You can get a caveat that some files are locked; Delete them anyway.

  Once you've done that, we may not have anything left in the LaunchAgents folder; in this case, you can remove the folder, but otherwise does not delete it. Other files in the folder are not necessarily malicious (though they may be, if you have also installed another type of malware).

  Log off or restart the computer. The Trojan horse should now be inactive.

  3. This step is optional. Open the folder as in step 1:

  ~/Library/Application Support

  and move it to the trash of the subfolders with the name, something you found in step 2.

  Do not move the Application Support folder or anything else inside.

  4. open the Applications folder. If there is an element named something, or "Hell Zip", or with any of the other names listed in step 2, then drag it to the trash.

  If in doubt, press option-command-4 key combination to get the apps by date added. Look at the apps that have been added since you first noticed the problem. If there is one, that you don't recognize, drag it to the trash.

  You can get an alert that the item is locked. Confirm that you want to move to the trash.

  Empty the trash.

  If you receive an alert that the application is running, force it to quit.

  5. from the Safari menu bar, select

  ▹ Safari preferences... ▹ Extensions

  Uninstall all extensions, you don't know that you need. When in doubt, remove all of them. None is required for normal operation. Do the equivalent with Chrome and Firefox browsers, if you use one of the people.

  If the window does not open, restart the computer in safe mode. Some caches maintained by the system will be rebuilt.

  6. replace the search engine and home page in each of your browsers, if either has been changed. In Safari, first load the desired home page, then select

  ▹ Safari preferences... ▹ General

  and click on

  Set on the current Page

• File in the applications folder

  I accidentally dragged a + 1 GB MP4 file in my applications folder. When I try to drag the output file, it appears only in my movies folder (or another folder, including the desktop) as an alias of 440 KB. Through the get info (command I) I have reset the permissions so anyone can read/write, but the same problem persists. How can I fix this problem so I can drag the real file on applications and in the movie as a complete file folder? It is a weird scenario I have not experienced before.

  Thank you.

  Hey Danielmak,

  Certainly a strange scenario with your MP4 showing a reduction in the size with a few hundred KBs Alias. Not to worry, this should do the trick for you.

  Try right click on the file that is located in the Apps folder, and then click Copy 'filename '. Once you have copied to the clip board, you can then paste the original file in the folder sequences or according to folder that you choose. After you have copied, open the folder that you copied the file and check it's there and can open as expected. If all is good, you can delete the file you have in the Applications folder to remove it from this place.

  Thank you for using communities of Apple Support. Have a great day!

• How to use a web application?

  I have install BarFight from here "https://apps.mozillalabs.com/appdir/". How do I use and how I can uninstall it?

  Rather mysterious. This page is probably only for developers at this point.

  To launch applications that you have installed, you can use this page: https://myapps.mozillalabs.com/

  If you click and hold on an application, after a short while a red X appears. If you release the mouse button without moving the icon, a confirmation dialog box is displayed to uninstall the application. If you move the mouse, the red X disappears and you do not get this dialog box.

  I have no idea where apps actually "live" in Firefox; I couldn't find it on my computer in any logical location of the. (Is in the cache maybe?) I do not watch it.)

• AppleScript to move mail to sub-sub-folders?

  I need help for an Applescript script.

  When I upgraded my OS X, all of my mail archives went AWOL.  I had them on Time Machine, but they are deep down in the subfolders.  And there are many of them.  (Example below).

  I'm putting messages out of the sub-sub-folders.

  

  I tried to write an AppleScript, but it does nothing:

  

  (where "-source" and "-target" are temporary test mailboxes.)

  I think that it cannot be recursing into sub-sub-folders.

  Can anyone help?

  OS X El Capitan 10.11.3

  view the iMac with the retina, 4 Ghz, 16 GB, 1 TB

  Hello

  Because each mailbox to a mailbox, return the mailboxes at the root of the source folder.

  Examples:

  each mailbox to mailbox 'import', return of mailbox "0drafts".

  each mailbox to mailbox "0drafts", return of mailbox "B9FA3AB1-...". »

  each 'data', return mailbox mailbox {mailbox, mailbox '8', '7' mailbox, mailbox '3' "9" ""}

  The script need a recursive handler like this:

  -------------------

  Tell application "Mail".

  the value in the mailbox mSource "-source.

  mailbox value dest "-target".

  tell the end

  My getSubMailboxes_moveMSGs (mSource, dest)

  on getSubMailboxes_moveMSGs (s, d)

  Tell application "Mail".

  move the messages from s to d

  Repeat with thisSubMBox (get s mailboxes)

  My getSubMailboxes_moveMSGs (thisSubMBox, d)

  end repeat

  tell the end

  end getSubMailboxes_moveMSGs

  ------------------