application Windows, javascript problems

Similar Questions

• Authorware Application in CDs - problem

  Hello
  Can I know if someone out there have this problem before?
  I have an Authorware application that uses the CallSprite - browser feature. I use this to display a MS Word document in the application window. It works very well - can access the file and displayed in the same application window: no problem. However, when I tried to burn this application and all the associated files in a CD, the application will encounter an error saying that it cannot find the .doc file! When he can do so perfectly well if the application is in the hard drive. Can you help me? Below s my codes:
  
  testFile: = FileLocation ^ 'Content//myfile.doc '.
  CallSprite (@"browserMyfile", #Navigate, testfile, 0, 0, 0, 0)
  
  Content directory resides in the same directory as the packaged authorware (exe) application.
  
  Thanks for help.
  
  Rgds
  MeiLian
  
  
  

  should not return reduced to the local file system?

  testFile: = FileLocation ^ 'Content\\myfile.doc '.

  Mark

  MeiLian wrote:
  > Hi
  > May I don't know if anyone out there have this problem before?
  > I have an Authorware application that uses the CallSprite - browser feature.
  > I use it to display a MS Word document in the application window. It works
  > thin - can access the file and displayed in the same window of application: no
  > problem. However, when I tried to burn this application and all the
  > files on a CD, the application will encounter an error saying that it cannot find
  > the .doc file! When he can do so perfectly well if the application resides
  > in the hard drive. Can you help me? Below s my codes:
  >
  > testFile: = FileLocation ^ 'Content//myfile.doc '.
  > CallSprite(@"browserMyfile", #Navigate,testfile, 0, 0, 0, 0)
  >
  > Content directory resides in the same directory that the authorware packaged
  > application (exe).
  >
  > Thanks for the help.
  >
  > Rgds
  > MeiLian
  >
  >
  >
  >

  --
  ------------------------------------------------------

  www.AuthorwareXtras.co.uk

  EuroTAAC eLearning 2007
  www.eurotaac.com

  www.freelists.org/List/flashelearning

  Multimedia synchronization command Authorware:
  www.authorwarextras.co.UK--> orders

  Synchronization of media with ease!

• Resize the application window to customize the function of the screen - problem?

  I know this may seem a little geek,

  but I wanted to know why the function of the shortcut is irregular:

  Resize the application window or floating window to fit screen. (Press again to resize the window so that the contents of the screen.)

  CTRL +-(backslash)

  Command +-(backslash)

  1 window Resized to fit screen - activated via the shortcut Ctrl +-

  

  2. the window is not Resized fit screen - function is disabled have it minimized the window

  (The title bar is hidden,

  but the right is a vertical space,

  where the software does not match the screen completely.)

  

  I want to know why this happens,

  at least on Windows is... (Yes, I use Windows 10)

  It would be on purpose?

  Some features to help with something,

  When the user returns to minimize the window?

  I wanted to keep window screen will perfectly still.

  even when minimized and return to the software;

  I need more space on the screen,

  in the vertical direction especially (because I have a screen ultra widescreen 2560 x 1080).

  To see a preview of the video is better,

  because 50 percent of the preview screen,

  However, if the proposed title bar (i.e. without use shortened).

  lose a small percentage.

  I want the amount of space as possible.

  I'm tired of getting retracing the shortcut each time I pass a task.

  Submit a bug report and use the version of application window for now. Maybe someone here could offer a workaround solution, but I think we have said pretty much everything what it means

• iCloud for Windows authentication problem

  I have iCloud for V5.2.1.69 Windows running on a current version of Windows 10.

  I have a version to update to iTunes, without no problem logging into my account.

  I can connect to the version of the browser to iCloud without problems.

  I have uninstalled and reinstalled the app iCloud three times now and restarted every time.

  I can't connect to the application windows to iCloud well! Every time he is saying

  "An error has occurred during authentication. Please try again. »

  I must have tried 10 times for several hours and still can not!

  If someone managed to connect via the Windows application?

  I have the same problem. You have made no progress on this?

  Thank you

• The Magic Trackpad 2 first plan window Focus problem

  I had the strangest question with my Magic Trackpad 2 on El Capitan (10.11.3.) When I am in the window of one application and tap/click to another application window, application of the new window comes to the foreground, but the old app is still under discussion. So if I try a keypad at this stage or type text, is what actually performing in the old app and not the new foreground application.

  For example, suppose that I open Safari and TextEdit and I am browsing a page in Safari. 50% of the time if I use my Magic Trackpad 2 to tap or click on in the document window empty TextEdit of Safari, TextEdit window will come in the home of prominent and Safari will be the background window, but if I start typing the text or press CMD - N to a new document, it will operate on Safari instead of TextEdit. This is just one example - literally, it happens with any application.

  I messed with all: accessibility for the Trackpad, trackpad settings, settings etc. No background apps or mouse extension installed applications. Tried both wireless and connected via cable to the lightning. Magic Mouse does not appear to have this problem, Trackpad 2 only.

  Anyone else having this problem? It drives me crazy and makes use of the Magic Trackpad 2 on OS X pretty useless.

  Hey it re-registers,

  I understand that you experience some problems with your selection of Magic Trackpad 2 and window to El Capitan. I would like to as allows you to test this behavior in Mode safe mode to see if the problem is still present:

  Try safe mode if your Mac does not end commissioning - Apple Support

  https://support.Apple.com/en-us/HT201262

  You can also consider testing this behavior in a new user account:

  How to test a question in another account on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204443

  Thanks for being a part of the communities of Apple Support!

• Help, please! I'm going nuts! JavaScript problem when you try to load the images on the E - Bay auctions and My Space does not look right

  This is the second time I've been here for help and I had to use IE in recent weeks because I still I have this problem. The pictures on individual E - Bay auctions start to load then stop, I think it is a Javascript problem. I already tried the troubleshooting tips for the "images are not displayed" AND I uninstalled/reinstalled Firefox without result. My space does not seem to be display correctly, for example, if I want to change the color of a font in a message boxes appear, but no color... Please HELP somebody! Thank you!

  URL of affected sites

  http://CGI.eBay.com/WS/eBayISAPI.dll?ViewItem & Item = 230497781181 & ADME:B:SS:US:1123 = getting

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).
  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.
  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.
  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')
  .
  You can also try to 'Reset all the preferences for the default user of Firefox' on the starting window of Firefox to solve the issues in Safe Mode - see http://kb.mozillazine.org/Resetting_preferences

• Active window color problem - cannot change the background color

  original title: Active window color problem

  By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application.  This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.

  At some recent point, I lost the background color of the active window within Windows uses 'household.  I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows.  How this change and can it be forced to adhere to the assigned active window background color?

  Hello

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

  Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Losing the application window in the passage of several single screen monitors.

  I'm having a problem in windows 7 on my laptop when I spent several monitor to work to a single monitor at home because I was running spread on 2 monitors applications seem to leave orders I had open on the second monitor not visible when I switch to the single monitor at home and reopen the app. Is there a function I need to run to get these missing controls reappear on the single monitor.

  If you move the application to the main screen window before closing, it opens on the main screen next time.

  If the application window is on the wrong monitor, you can move:

  1. place the mouse on the icon of the application in the task bar, so that the preview of the window appears above it.
  2 right click on the preview of the window.
  3. If the word move is dimmed in the menu, click restore , and then right click on the preview again.
  4. click on move .
  5. press and hold down the left arrow key to move the window to the main screen.
  6. press enter .

  Boulder computer Maven
  Most Microsoft Valuable Professional

• cannot move the application window = Windows does not know how to do windows.

  It is quite ironic that the company that filed the name windows does not the best job to design a GUI of windows desktop:

  1. If I run a browser with multiple tabs (usually 30) opened with a connection with limited bandwidth (cable modem), the browser window opens but is locked in place (it cannot be dragged by the grab bar) until all the tabs are loaded.  ~ 30-40 seconds.  What is happening with this?  Who designed the graphical interface of Windows?

  Furthermore, is not a failure to set bookmarks, multiple tabs are left open because many activities underway, that's what tabs are for.

  2. If a secondary application window / "door" is open, the application window is locked in place.  If an attempt is made to drag the window of the grab bar, the pane starts a queasy nod.  The pane must be closed before the window can be moved.  The component can then be reopened to complete the desired operation.  Is this a real problem?  Well Yes, sometimes a lot of time is wasted juggling and spinning to get the installer of Windows GUI/desktop as you want, for example: obtaining information from a window of the underlying application and before deciding what to do.  This applies to windows, not windows, not MAC OS, Linux not.  Windows forever.

  Re. 1. If I run a browser with many tabs...

  It is not so much the result of the design of GUI but a work function how graphical operating systems.   Events, such as the mouse messages are queued in a message loop, and there is a communication between an application program and Windows if a callback procedure.  The operating system cannot always respond instantly when an application is busy as any other treatment happens.  Open the 30 windows! on the application startup is a lot of treatment and is bogged down the loop CPU and message.   If you want an instant answer to OS any level of demand, you can look to a supercomputer rather than a PC multi-million dollar.

  Re. 2. If a secondary application window / "door" is open, the application window is locked in place.

  The "sub-sub-window/pane' is properly called a modal dialog box.  Windows are usually coded in modal form (which means that they should be closed before a continuous program) when they include a message critical, or can be used to configure the application settings.  If you would like more information see http://en.wikipedia.org/wiki/Modal_window

  These two conditions certainly exist in other operating systems.

• Detection of resolution Windows move Application Windows with multiple monitors

  Looking for a few tips:

  I have a laptop Dell XPS13 plugged into a Targus docking station, to which I have two connected displays. So, indeed, I have three monitors, which is the screen of the laptop.

  Every now and then monitors everything flashes once or twice; When it's finished, all or part of my application windows are passed to different monitors, generally meet on the screen of the laptop. I think that Windows must re - adjust the resolution or something, and is not to remember what application is linked to which monitor.

  What is the result of an intermittent connection between the monitors and laptop docking station? (These last two are brand new.) As I type this now, I have not known the issue for some time, so I wonder if it has nothing to do with what applications I use. I tend to 'maximize' windows in monitors, if that makes a difference.

  Jason

  Hi Jason,

  Thanks for sharing the information. Your efforts to solve this problem is appreciated.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

• Applications Windows does not detect my wireless controller

  Windows applications (windows store games) does not detect my speedlinkxeox wireless controller pro, earning 8.1 and win 10, but it works perfectly fine on pc games. Tried many games. Yes with the receiver. Is there a work around for this problem, I have the drivers installed too.

  Hello sunny

  Thanks for posting your query on the Microsoft Community.

  You can deal with this issue because of a corruption in Windows applications.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Did you do any change important before this problem?

  2. You receive no error message / error code on your system?

  I suggest you to follow the below methods and check.

  Method 1: modern convenience store app.

  The modern convenience of the app store is built in the Troubleshoot utility which can detect and automatically correct most of the errors of the app. So, I suggest you to download and run the troubleshooter modern app to fix application errors.

  You can download it here:

  http://download.Microsoft.com/download/F/2/4/F24D0C03-4181-4E5B-A23B-5C3A6B5974E3/apps.diagcab

  If the problem persists, try Method 2.

  Method 2: I suggest you to follow the steps described in the article below and check.

  Solve problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error.

  I can not install any application Windows store. incorrect time showing a time 0 * 80080008 another time 0 * 80072efe all time showing like this different type of error. first time using windows 8.1 but restore for windows 8. but problem still. How do reslove this problem.

  Hi Anish,

  If you receive the error 80072efe or 80080008 when you use Windows Store, the cause may be an interruption of the connection between your computer and the Windows Update service.

  Here are a few methods you can try to solve this problem.

  Method 1: Run the Windows Update Troubleshooter.

  Open and run the Windows Update Troubleshooter to fix the problem automatically.

  Method 2: Run the troubleshooter for Internet connections.

  Open the network troubleshooter utility by hitting at full speed in the straight edge screen, quilting search (or if you use a mouse, pointing to the top right of the screen, move the pointer of the mouse down and then clicking search), inbound to identify and repairin the search box, and then tapping or identify and repair network problems.

  Method 3: Restart the Windows update service and check.

  a. press or press the Windows key + R, type services.msc and press ENTER.

  b. If you are prompted for an administrator password or a confirmation, type the password or click continue.

  c. find the Background Intelligent Transfer Service and check the status.

  d. If the status is stopped, click Background Intelligent Transfer Servicesand then click Start menu.

  e. search Windows Update and check the status.

  f. If the status is stopped, click Windows Update, and then click Start menu.

  g. close Services.

  Method 4: T emporarily disable the security software and verify.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  You can also check out the link and check if it makes a difference.

  Solve problems with a soft

  Please an update of the results to help you further.

• Ago 10-15 second delay after you have clicked on a link from any application Windows 8 Metro... before opening the web browser.

  Title explains the problem: ago 10-15 second delay after clicking on a link from any application Windows 8 Metro... before opening the web browser.

  Any browser (IE, Chrome, etc.). Any application as long as it's a subway app (mail, etc.). If I click on a link to a Web page from any metro Windows 8 app it is 10-15 second delay before its opening.
  I tried to repair Windows, disable Windows defender, and a bunch of other things and nothing is set.
  Anyone have any ideas?
  Thank you!

  Hello

  Try to manually configure the DNS servers in the network card settings (guide: http://www.plus.net/support/software/dns/changing-dns-windows-8.shtml).
  It fixed the problem for me.
  Apparently it has something to do with the reuter incorrectly redirect DNS queries (I use D-Link).

• The InDesign application window resizes the launch

  I searched on Adobe communities for this problem, but nobody seems to have brought up, outside of a query in 2013 about CS6. With Indesign CC, I noticed that I can not remember the size or position of the application window to launch. It always maximizes itself to the width of my monitor. This means that I have to resize and move the window everytime I open the app. This does not happen with other programs Adobe CC. Someone else has this problem and is there a solution? I am using a Dell U2913WM monitor that has a screen that is extra wide, so there is a slight possibility that this has something to do with it, but only for InDesign?

  Thank you very much

  John

  Fiddling a bit more and I have now managed to fix! Using my NVIDIA nView Desktop Manager I've customized the settings for Indesign so that launch settings are set to "last setting" and 'open the windows on the screen' is set to 'last display '. This seems to have worked. I hope that it might help Bob.

  Best regards, John

• using the value of the point of application in javascript

  Hi all
  
  Apex 3.1
  
  I have a javascript that calls an application process, please see below. In the application process, I have create/modify the value of an element of the application logic. Later in the javascript, I need to define a page element to the value of the application element that has been created in the application process. All of the alerts that I post for the javascript display this value as empty, even though a similar HTP.prn in the process of the application displays the value! Once the completed script the correct value of the issue of enforcement is in session state. Can someone explain this problem of sync for me? Why can't I get the value of an element of application in javascript code when the application process is called by the javascript code?
  
  Is there a simple solution for me to get this value?
  

  <script>
  function f_ValidateLinkLine(pThis) {
      
     // The row in the table
     var vRow = pThis.id.substr(pThis.id.indexOf('_')+1);
     
     // is Link Line really a number?  
     if ( isNaN(html_GetElement('f20_'+vRow).value)) {
          if (html_GetElement('f20_'+vRow).value.length > 0) {
          alert('Link Line is an invalid number - '+html_GetElement('f20_'+vRow).value);
          html_GetElement('f20_'+vRow).value = '';
          }
     } else {  
         if ( ! isNaN( parseFloat(html_GetElement('f20_'+vRow).value) ) ) {
  
     var link_line = parseInt(html_GetElement('f20_'+vRow).value);
  
     if (html_GetElement('f20_'+vRow).value.length > 0) {
  
        var get = new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=ValidateLinkLine',0);
        get.add('F101_LINK_LINE',html_GetElement('f20_'+vRow).value);
        get.add('F101_INVENTORY_ITEM_ID',html_GetElement('inventory_item_id_'+Number(link_line)).value);
        get.add('F101_QUOTE_LINE_LINK_ID',html_GetElement('f01_'+spacer+link_line).value);
        get.add('F101_QUOTE_LINE_ID',html_GetElement('f01_'+vRow).value);
        get.add('F101_QUOTE_NUMBER',html_GetElement('f19_'+vRow).value);
  
        gReturn = get.get();
  
  
     // The application process can sometimes change the value of F101_QUOTE_LINE_ID
    //  and I need to set f37 to this value when this happens
  
      html_GetElement('f37_'+vRow).value =('&F101_QUOTE_LINE_ID.');  //< -- This does not work, the applicaiton item is blank!
   
        if (gReturn) { 
         alert(gReturn);
        }
   
        if(gReturn) { 
         html_GetElement('f20_'+vRow).value = '';
         html_GetElement('f37_'+vRow).value = '';
        }
  
     }  //End Check Length
  
    } else {
  
    html_GetElement('f37_'+vRow).value = '';
  
    } // is Link Line a number?    
   
   } // End If   
  
  } // End ValidateLinkLine
  
  </script>

  Published by: blue72TA on August 16, 2011 11:39
  
  Published by: blue72TA on August 16, 2011 11:41
  
  Published by: blue72TA on August 16, 2011 11:41

  Hello

  When you use the point of application in JavaScript, as you do, string &. F101_QUOTE_LINE_ID is replaced by the value of the session state.
  Changes to this value of the item when you call process On Demand do not affect the page.

  Lets take for example,
  You app element value of F101_QUOTE_LINE_ID is for example XX in session state.
  You run the page and view the source of the page that looks like this

  html_GetElement('f37_'+vRow).value =('XX');
  

  Like you have a value hard to JavaScript code.

  Nothing can change this, unless you refresh the page.

  You need return the value of the process On Demand.
  To set the value of code might look like so

  html_GetElement('f37_'+vRow).value = gReturn;
  

  Kind regards
  Jari