Help, please! I'm going nuts! JavaScript problem when you try to load the images on the E - Bay auctions and My Space does not look right

Similar Questions

• Windows media player error "Windows Media Player has encountered a problem when you try to read the file" after burning CDs.

  Original title: "missing songs" in my windows media player then burn them on several cd :((

  I burned songs to several cd using my Windows media player to make different Cd, but after I returned to my library all the songs that I burned to the CD have disappeared, they are there, but they won't play it is as if they have been deleted, a window appears saying that windows media player has encountered a problem when you try to play the file. I did not notice this until after Cd burning a few I can't do more because if I keep going I'm not going to have more songs in my library! I don't know what to do im going crazy, it took me a long time to get all of these songs and now he disappeared! I have Windows 7 Ultimate is the version 12.0.7601.17514 hope that helps

  Hello
   
   
  They were playing before you burn CDs?
   
   
  Method 1:
  
  Open the troubleshooting Windows Media Player settings Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
  Open the troubleshooter in the Windows Media Player library:
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
  
  Method 2:
  
  This problem may be due to database corruption. You can delete the Windows Media Player database and check if the problem persists.

  Steps to clear the database of windows media player:

  a. exit Windows Media Player.
  b. Click Start, run, type %LOCALAPPDATA%\Microsoft\Media Player and then click OK.
  c. Select all files in the folder and then click on Delete on the file menu.

  Note you don't have to remove the folders that are in this folder.

  d. restart Windows Media Player.

  Note: Windows Media Player automatically rebuilds the database.

  If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:

  a. exit Windows Media Player.

  b. Click Start, click Run, type % LOCALAPPDATA%\Microsoft and then click OK.

  c. Select the Media Player folder, and then click on Delete on the file menu.

  d. restart Windows Media Player.

  Note Windows Media Player automatically rebuilds the database.

• Problems when you try to move the 3 stepper motors

  Hello

  I have problems when I Isaiah to compile a 3 stepper motors control program.

  I have 3 steepest motors and controller (3 SMCP33 + SMCP33-EVA) nanotec.com, they also provide an example of Vi to control a motor that works successfully, but problems happen when I try to adapt the program to try to start the 3 Motors. The final application for this is going to be a Cartesian robot XYZ so finally I need to program coordinates to move the 3 Motors.

  I am new to LabVIEW, so what I do is try to adapt the nanotec example to order 3 engine as follows.

  -J' I assign each engine a different address, doing so that I can run each engine separately. But when I try to run 3 programs at the same time, they work but all moving them the engine (the first that has been run).

  -If I try to make a sort of sub - VI is the same thing, only one motor is driven.

  -Moreover, I get a warning when I try this, I have attached a screenshot of this.

  I have attached the Vi and texture it to improve my description.

  I woul be grateful if someona can help aport.

  Kind regards.

  Thanks for posting the original.  By comparing the two screws immediately gives an indication of what might happen.

  In the picture you posted you circled two places where you changed the address of the reader. In the Example.vi - Nanotec address of the player is connected to about 14 seats.  So when you try to run the other engines in your modified program, the 12 places, you have not changed the address of the player are always preset to motor 1.

  What you need to do is to divide the example VI in at least three parts.  The first part initialization. The next part moves the engine.  The last part ensures that the engine is stopped and made any required another stop.  Each party becomse a separate Subvi. Each Subvi has the address of the reader as input.  The initialization and shutdown parts are placed before and after a while loop.  The movement parts are inside the loop.  You can use three of each sub - VI for the three engines or a Subvi combined with subVIs move three to manage all three engines.

  I can't say what approach might be better without knowing more about how you plan to order the engines - one at a time or all three at the same time, what kind of feedback is used, how management mistakes and other topics.

  Lynn

• OfficeJet 6500 more e a-> HP - DQEX5.exe problem when you try to install the CD

  I bought above mentioned printer.

  REF: CN557A

  SN: [personal information]

  I use Windows XP

  Follow the start-up procedure quick and everything worked well.  I'm at the stage now where I had to put the CD, follow the configuration steps.

  I deleted the old HP software (from my HP printer) previous first. Then I tried to install it and whenever I get an error after awhile, saying there is a problem with HP-DQEX5. EXE. He closes the Setup program.

  I tried several times, but it does not work. Today, I deleted the first update HP (I think it was installed last night, when I was trying as well). Then started again, but without success.

  I NOT connected the USB cable, as the manual says not to do so until the installation program tells me to do.

  Could someone please try to help me?

  I get very upset, frustrated and so on. Plug-and-play said. Care Yes, don't play yet. = o)

  Thanking you in advance.

  The old printer may have some components behind which can be erased using a normal life to left uninstall method. What printer model was your old printer?

• problem when you try to rename the images uploaded by using the value of the session

  Hello

  I have a form where 9 images are downloaded into thumbnail size and then stored in a file. What I m trying to do is to rename these vignettes of their original name for username_0, username_1, username_2 etc. for each of the 9 inches. The user name is the registration form on the same page. I created a session for the username variable and tries to use it to change the name of the image, while my pictures are for download and resize the rest as the original and not as the new number name of $ username_. I have pasted the code below, and would be very grateful for any help with this:

  <? PHP session_start();

  ...................

  Check that the form has been sent and this name is not empty and has no errors
  If ($_POST & &! empty($_POST['directusername'])) {}
  Set session variable
  $_SESSION ['directusername'] = $_POST ['directusername'];
  }
  define a constant to the maximum download size
  define ('MAX_FILE_SIZE', 5120000);
  If (array_key_exists ('upload', $_POST)) {}
  define constant for file transfer
  define ('UPLOAD_DIR ',' J: / xampp/htdocs/propertypages/uploads /');
  convert the maximum size in KB
  $max = number_format (MAX_FILE_SIZE/1024, 1). ' KB ';
  create an array of allowed MIME types
  $permitted = array (' image/gif ',' image/jpeg ',' image/pjpeg ',' image/png');
  foreach ($_FILES ['photo'] ['name'] as $number = > $file) {}
  replace all the spaces in the file name with underscores
  $file = str_replace (' ', '_', $file);
  Start by assuming that the file is unacceptable
  $sizeOK = false;
  $typeOK = false;
  Verify that the file is within the allowed size
  If ($_FILES ['photo'] ['size'] [$number] > 0 & & $_FILES ['photo'] ['size'] [$number] < = MAX_FILE_SIZE) {}
  $sizeOK = true;
  }
  Verify that the file is a permitted MIME type
  {foreach ($permitted as $type)}
  If ($type == $_FILES ['photo'] ['type'] [$number]) {}
  $typeOK = true;
  break;
  }
  }
  If ($sizeOK & & $typeOK) {}
  switch ($_FILES ['photo'] ['error'] [$number]) {}
  case 0:
  include('Includes/create_thumbs.) Inc.php');
  break;
  case 3:
  $result [] = "error loading $file. Please try again. « ;
  by default:
  $result [] = "error loading $file system. Please contact us for assistance. « ;
  }
  }
  ElseIf ($_FILES ['photo'] ['error'] [$number] == 4) {}
  $result [] = 'no file sΘlectionnΘ ";
  }
  else {}
  $result [] = "$file cannot be downloaded. Maximum size: $maximum acceptable File Types: gif, jpg, png. « ;
  }
  }
  }
  ................ THE CODE BELOW IS THE FILE WHICH DONE AND TRIES TO RENAME THE THUMBS...

  <? PHP
  define constants
  define ('THUMBS_DIR ',' J: / xampp/htdocs/propertypages/uploads/thumbs /');
  define ('MAX_WIDTH_THB', 75);
  define ('MAX_HEIGHT_THB', 75);
  set_time_limit(0) (600);
  treat the uploaded image
  If (is_uploaded_file ($_FILES ['photo'] ['tmp_name'] [$number])) {}
  $original = $_FILES ['photo'] ['tmp_name'] [$number];
  start by getting the details of the original
  list ($width, $height, $type) = getimagesize ($original);
  Make sure that the original image is large enough
  If ($width < 270: $height < 270) {}
  $result [] = "image dimensions are too small, a minimum image of 270 of 270 is needed."
  }
  else {/ / crop the image of a square before resizing for the thumb}
  If ($width > $height) {}
  $x = ceil (($width-$height) / 2);
  $width = $height;
  $y = 0;
  }
  of other if($height > $width) {}
  $y = ceil (($height-$width) / 2);
  $height = $width;
  $x = 0;
  }
  calculate the ratio of scale
  If ($width < = MAX_WIDTH_THB & & $height < = MAX_HEIGHT_THB) {}
  $ratio = 1;
  }
  ElseIf ($width > $height) {}
  $ratio = MAX_WIDTH_THB / $width;
  }
  else {}
  $ratio = MAX_HEIGHT_THB / $height;
  }
  If (isset($_SESSION['directusername'])) {}
  $username = $_SESSION ["directusername"];
  Strip the extension off the name of the image file
  $imagetypes = array ('/ \.gif$ / ',' / \.jpg$/ ',' / \.jpeg$/ ',' / \.png$/');
  $name = preg_replace ($imagetypes, ", basename($_FILES['photo']['name'][$number]));
  change the names of the images to the user name _ the number of the photo
  $newname = str_replace ("name", "number of $username_$", $name);
  create a resource of original image
  {Switch ($type)}
  case 1:
  $source = @ imagecreatefromgif ($original);
  If (! $source) {}
  $result = ' failed to process GIF files. Please use JPEG or PNG.';
  }
  break;
  case 2:
  $source = imagecreatefromjpeg ($original);
  break;
  case 3:
  $source = imagecreatefrompng ($original);
  break;
  by default:
  $source = NULL;
  $result = "Cannot identify the type of file.";
  }
  Make sure that the resource of the image is OK
  If (! $source) {}
  $result = "image download problem, please try again or contact us for further assistance";
  }
  else {}
  calculate the dimensions of the thumbnail
  $thumb_width = round($width * $ratio);
  $thumb_height = round($height * $ratio);
  create a resource of image for the thumbnail
  $thumb = imagecreatetruecolor ($thumb_width, $thumb_height);
  create the resized copy
  imagecopyresampled ($thumb, $source, 0, 0, $x $y $thumb_width, $thumb_height, $width, $height);
  Save the resized copy
  {Switch ($type)}
  case 1:
  If (function_exists ('imagegif')) {}
  $success [] = imagegif ($thumb, THUMBS_DIR. $newname.'. gif');
  $photoname = $newname.'. gif';
  }
  else {}
  $success [] = imagejpeg ($thumb, THUMBS_DIR. $newname.'. jpg', 50);
  $photoname = $newname.'. jpg';
  }
  break;
  case 2:
  $success [] = imagejpeg ($thumb, THUMBS_DIR. $newname.'. jpg', 100);
  $photoname = $newname.'. jpg';
  break;
  case 3:
  $success [] = imagepng ($thumb, THUMBS_DIR. $newname.'. png');
  $photoname = $newname.'. PNG';
  }
  If {($success)
  $result [] = "Upload successful";
  }
  else {}
  $result [] = "image download problem, please try again or contact us for further assistance";
  }
  Delete the memory image
  imagedestroy ($source);
  imagedestroy ($Thumb);
  }
  }
  }
  }
  ? >

  ..................................................

  I hope I ve provided enough information and eager to receive any help or advise you in this matter.

  Use quotes here:

  $newname = str_replace ('name', '$username_$number', $name);
  

  Change to this:

  $newname = str_replace ('name', "$username_$number", $name);
  

• When I try to access the Recovery Console, "Welcome to Setup" screen does not appear and it asks me to install on a partition... Help

  My office has the continuous loop reboot of Windows XP SP3 ("UNMOUNTABLE_BOOT_VOLUME" STOP 0x000000ED - 0x8A8EB7B8). When I put my Windows XP Pro installation CD to access the recovery console to make the steps required to solve the problem. The "Welcome to Setup" screen ever comes back to press 'R' to arrive at the RC. Instead a screen comes up that says, "the following list shows the existing partitions and space unpartitioned on this computer." Then, he gives me the ability to press ENTER to install Windows XP, press C to create a partition, or D to delete a partition.

  Why can't I to the Recovery Console to fix the reboot loop?
  Most importantly, I lost some data on my hard drive? If it won't let me even get to the RC?

  I found a solution to my problem and it worked!

  If anyone else has this problem follow these steps:

  Click on this link and follow the instructions to make a CD of Windows XP Recovery Console. http://www.proposedsolution.com/Downloads/Download-Windows-Recovery-Console/

  Then, when you start using the CD, this...

  1. When you see the "Welcome" screen
  2. press on 'R' to use your Recovery Console to repair the installation
  3. Type "chkdsk/r" and press "enter." CHKDSK will analyze and repair your hard disk. Type "Exit" once this process is complete.

  Your computer will restart and should be fixed. at least mine was.

  I hope this helps!

• Error: DF024/Exit Code: 7 - problems when you try to install the first 13 items

  Hello

  When I try to install PE13 I get the following message:

  Exit Code: 7 Please see specific errors below for troubleshooting. For example,  ERROR: DF024 ...   -------------------------------------- Summary --------------------------------------  - 0 fatal error(s), 1 error(s)    ----------- Payload: Elements 13 Organizer(64 bit) 13.0.0.0 {C75EDFE2-E94B-476D-89B6-A13C1D98BD03} -----------  ERROR: DF024: Unable to preserve original file at "C:\Program Files\Adobe\Elements 13 Organizer\Assets\locale\sv_se\zstring.dct" Error 32 Det går inte att komma åt filen eftersom den  används av en annan process.(Seq 12130)  ------------------------------------------------------------------------------------- 

  How to solve this?

  Thanks in advance!

  Best regards

  Stefan

  Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

  The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

• network error when you try to load the Messenger. Can help out you in line/Tech support

  Why can't I load the new version of live messenger? Why my hard drive does not start a DVD disc or data automatically when placed in player?

  Hello
   
   
  The question you have posted is related to Windows Live Messenger and would be better suited to the Windows Live community. Please visit the link below to find a community that will provide the best support.
  http://windowslivehelp.com/product.aspx?ProductID=2
   

• Problem when you try to update the database

  The problem I have is that whenever I try to change a certain element of customer information it always modifies a totally different number that has no meaning.  in the database. For example, an island of customer id is 3 and I want to change it to 12, the number that indicates the database after you have clicked on update is 40430. I am at a loss and have no idea why he did such a thing. Here is the file change to make the changes accordingly.

  = Edit file =.

  <!-insert or update? ->
  < cfset EditMode = IsDefined "(FORM. BusinessID") >

  < cfif EditMode >

  <!--> film update
  < cfupdate datasource = "wyi2" tablename = "Company" >
  < cfset action 'update' = >
  < cfelse >
  <!--> Add movie
  < cfinsert datasource = "wyi2" tablename = "Company" >
  < cfset action 'added' = >
  < / cfif >

  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
  "< html xmlns ="http://www.w3.org/1999/xhtml">".
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
  < title > Untitled Document < /title >
  < / head >

  < body >
  <!--> feedback
  < cfoutput >
  < h1 > customer #FORM. BusinessName # #action # < / h1 > < br / >
  < cfif IsDefined('FORM.) Events) AND SHAPE. EQ events 1 >
  < a href = "add_event.cfm" > now add event < /a >
  < / cfif >
  < / cfoutput >
  

  < / body >
  < / html >

  So you're saying that if you do a CFDUMP and CFABORT just before your update request then Form.IslandID is, for example, 4; but he actually wrote a number 5 digit to the database? Because it's all just ridiculous. Are you absolutely sure that you have not named two identical form fields? If you do this, CF will concatenate their values by commas that CFQuery will almost certainly do everything right in the database because it assumes that it is what you want.

  Oh and read about CFQueryparam.

• Have problems when you try to connect the app

  Anyone have struggled to try to log in photoshop on iphone fix 6

  Andzoe and EJ2310 .

  We just released Fix 1.2.1 to treat the following accidents:

  • 9.3 only iOS: difficulty crash at sign in.

  Please update and let me know if it solves your problem. Thank you!

  -Kathleen

• Problem when you try to use the trigger for a NI PCI 6713 card

  
  
  

• When you try to run the system on gateway mx6453 recovery, recovery begins a box opens indicating the system restore is incomplete, please insert the cd or dvd

  try to run the system on gateway mx6453 recovery, opens the recovery page, but then appears a box that says system restore is incomplete, please insert the cd or dvd.  the recovery partition seems to agree.

  Hello

  · Why are you running the system recovery?

  · Are you able to perform system restore on the computer?

  I suggest contacting the manufacturer of the computer, the link you can check: http://support.gateway.com/support/default.aspx?cmpid=topnav_support

  For reference: Troubleshooting for problems when you try to use the System Restore tool in Windows XP: http://support.microsoft.com/kb/302796

• Vista update problems. It goes in a loop when you try to update.

  Vista goes in a loop when you try to update. The loop is as follows: - control panel update windows for checking updates for windows updates-installnew update softwear-install now the user account control continue download and installation of updates = control of update windows for updates on your computer-check updates - so this loop repeat any help woul be received gratefully

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to assist with co

  Problems of conversion of PDF to MS Word document.  I managed to convert 4 files and now the subsequent files generate a "Conversion failed" error when you try to convert the file.  I have a big manuscript and I separated each chapter to help the conversion; as I said, the first 4 pieces without problem, then the conversion failure.  I tried to convert the document integer and same result.  Specifically, I bought the feature export to Word.  Please help.  I had initially export the Word Perfect PDF document and attempting to pass PDF to MS Word.

  Hi sdr2014,

  I'm sorry to hear that your conversion process is at a standstill. It seems that the problem is not specific to a single file, you have been unable to convert anything, since the first four chapters of a correct conversion.

  So, let's try this:

  If you want to convert via the ExportPDF site, please sign out, clear the browser cache, and then reconnect. If you use the drive, please choose Help > updates to ensure that you have installed the latest version.

  Please let us know how it goes.

  Best,

  Sara

• I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." 0x8002801D error

  Error of the IDM

  I suddenly have a problem when you try to download I get this message. "Cannot transfer to Internet Download manager." Error 0x8002801D in windows XP. Pleasw help to y for remedy.
  Thank you

  Hello

  (1) what you're trying to download?

  (2) how you try to download?

  (3) what browser you are using to download?

  (4) don't you make changes to the computer until the problem occurred?

  Step 1: This error occurs when your browser and IDM are set to run under different privileges.

  Maybe you have set to run IDM with administrator rights. This is not correct. IDM Ouvrezledossier if please, right-click on 'IDMan.exe', select the 'Properties' menu item, switch to the "Compatibility" tab and uncheck the checkbox "Run this program as Administrator" (arrow 2 on the image). In addition, you must remove the compatibility with previous versions of Windows if there is none activated (arrow 1 in the picture).

  

  If this does not help, try to do the same for the executable file of your browser. In addition, turn off the feature with older versions of Windows and "Run this program as Administrator" checkbox.

  Step 2: You may need to run IDM with administrator once rights to register its DLL files. Exit IDM using "Tasks-> output" of the main menu. Then right click on IDM launch icon in the Windows (arrow 1 in picture) programs launch menu and select "Run as Administrator" (arrow 2 on the image).

  

  Then exit IDM again and run normally.

  Hope this information is useful.