shadow copy
disk space
You want to change the disk space used by system restore.
By default, the system restore takes up to 15% of the total capacity of your hard drive.
http://www.vista4beginners.com/system-restore-space-used
"Change the amount of space used by system restore.
You might be interested in the above to save free space on the disk.
See you soon. Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Windows Backup - will expire when you create a shadow copy
I had the same problem for a few months, and now it's time to remedy. When you perform the backup of windows, I found the same message every time.
Create the backup ends at 15% of the shadow copy creation then he said, Windows backup has not completed, the only information I get is it is a "Timed" Out while creating a cliché
Can anyone help with this please?
See this Microsoft Knowledge base article:
+ Time-out errors occur in Volume Shadow Copy service writers, and shadow copies are lost during backup and at the time when there are high levels of input / output +.
http://support.Microsoft.com/kb/826936 -
Re: Satellite A300: How can I use shadow copy if I don't Win VISTA
Hello
Recently, I bought a toshiba A300 with VISTA. A few days ago I installed a Windows XP (before I made a copy of the partition with ghost, but I did the recovery DVDs :-()
Now I want to install VISTA again a phantom image doesn't :-(so I want to use the copy of the score of the shadow, but I have not installed VISTA, and how I can use the shadow copy if I don't have VISTA installed, please?
Can someone help me, please?
Thanks in advance!
MYHello
Why you didn t create a DVD recovery Toshiba at the beginning?
In my view, there is info in the user manual and a notification that recovery HARD disk image should be burnt on the DVD using the Toshiba recovery disc creator.
I don't know if you will be able to reinstall Vista now without buying the DVD of recovery of m.
Try to boot the computer and press the F8 key. Usually a start menu should appear providing some options. The first option called fix my computer will allow you to reinstall Vista. But I doubt that this option is now available after installation of XP!
This is why you last chance would be a recovery DVDs you can buy here:
https://backupmedia.Toshiba.EU/landing.aspxGood bye
-
Why am I missing dates of shadow copy?
I logged on a Server 2003 and started to restore shadow copies of files that he had deleted files. I was not able to connect to this server for 3 days. The 4th day, I was able to connect, but none of the date shadow copy that was here 4 days ago were there when I logged in. What could have happened? What should I check?
Hello
Please contact Microsoft Community.
I understand from the description of the issue that you are having problems with the dates of shadow copy.
It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en/category/WindowsServerI hope it helps. If you have problems in the future, please let us know. We will be happy to help you.
-
Win Server 2003 SP2. Backup starts and see errror message "error returned while creating the volume shadow copy: 0x8004230f.» All solutions? CPP, Volume Shadow Copy Stallion are started.
Thank you for visiting the Microsoft answers community.
The question you have posted is related to Windows Server and would be better suited in the MS TechNet Windows Server Forum. Please visit this link to find a community that will provide the support you want.
-
I can't get updates or install programs. What should I do?
Hi Busch_hawg,
Thank you for your question in the Forum of answers.
You get an error next to the message above?
I suggest to use the System File Checker to check corrupt or missing files.
Here is an article on how to do it:http://support.Microsoft.com/kb/936212
I also suggest checking the event viewer to see if additional information is available to post on this forum.
Here is an article on it to help you get started:http://support.Microsoft.com/kb/947321
You can restart the service by clicking the Windows Orb on the taskbar, the type of 'services' in the search field.
Right click on the 'Services' entry that appears, and then click "Run as Administrator". You can ask your password or to OK action.
Locate the service "Volume Shadow Copy" in the list on the right, right-click and select "Start" to start the service.Please let us know how it works.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Volume shadow copy error after moving to MSATA SSD on R7 - 572
A while back I cloned the value default 1 TB SATA drive on an MSATA SSD plugged into the slot unit MSATA.
At the time I had been unable to conceive the MSATA as boot drive, while the original (also bootable drive) was in the system such that it does not appear in the BIOS from startup list.
As I did not need the 1 TB, I just removed and have used the system very well with just the MSATA SSD.
Today, I tried to make an Image of Windows backup system and ran a (below) Volume shadow copy error
Volume shadow copy service operation failed. (0x807800A1)
Writer has encountered a transient error... (0x800423F3)
I check all the main remedy online by ensuring that all VOlume shadow copy served are running, but without success. I feel that the fact that I'm on the SSD MSATA which was not visible in the list of the BIOS boot maybe being tied to the backup crashing.
Anyone running the R7-572 on the MSATA port that is able to make a system image backup?
Thanks for your comments
It took me awhile, but I finally understood what was preventing the creation of the image of the system.
Looking at the event viewer, he had a lot of mistakes, the first mistake we a CAPI2 with event 513, then it was a VSS error with event ID 8228 stating an invalid character in an XML file.
Error says:
Do not parse the XML file.
Reason, an invalid character was found in text content.
Line 0x000003c0
Position 0x000009c8, the file below is damaged.
0xc00ce508 error code
Text problem<> Search through dozens of threads and try a number of bugs without success, I finally found one who mentioned their question came from bad characters in the names of partition after cloning with EaseUs Todo backup.
It's the tool that I used to clone my drive to a SSD, I decide to check it out.
The thread mentioned using GPT fdisk utility found on sourceforge, so I downloaded the tool.
You just run the executable in administrator mode. Find how to use it was a little hard, but basically the commands below does the job
0:-enabled disk 0, which is my drive.
I - to view the information on each partition
It will ask you the number. This allows you to see the names. Some of my partitions had some very strange names did not, we had a quote.
I checked what names when used on another laptop and decided to appoint mine as follows (I think you can use any name)
first 600 MB partion: database partition
Second partition of 300 MB: EFI system partition
Thrid 128 MB partion: Microsoft Reserved partition
Fourth 205GB partition: partition database
Fifth 17 GB partition: partition recovery
To change the name of the partition, use the command
c ask for the number of the partition, then the name
Then save with
w - written revisions and outputs
I rebooted, tried the system image backup and no problem this time.
I lost a full day on this topic, so I hope it can help someone else in the future
-
When I defragment I get message "suspended for the shadow copy of volume.
Original title: Defrag problem
When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?
The VSS Service should not be run unless you do some kind of a backup that uses it.
Are you using any kind of third-party backup software that would force the VSS Service to run all the time?
If defrag used to work, what do you think might have changed since the last time it worked correctly?
I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).
You check the VSS Service, click Start, run and enter in the box:
services.msc
Click OK to open the Services applet and find the Volume Shadow Copy Service.
Select the status and Startup Type columns.
If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.
If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself). If it starts up again without a valid reason, you need to understand why and fix it. Restart to make sure the changes 'stick '.
See if your defragmentation works when the VSS Service does not work...
-
The above error when I try to backup my hard drive or create a restore point. There is no restore point on my HP Pavilion while I run CHKDSK. In all other respects, the machine works fine. When you try to save the program starts but fails with the above error 10 seconds later.
Hi Anthony,.
What is the full error message?
Follow the suggestions below for a possible solution:
Check if all files have been created on the hard drive (or anywhere where you are trying to save).
Check the VSS service in the services window. Use the following steps to check:
a. click Start and type services.msc in the search box
b. search for the shadow copy volume service
Make sure that the Startup type is Automatic. Steps to set the auto services
c. search for the service
d. right-click on the service
e. If the service is stopped and then Start the service
f. Select Properties
g and in the Startup type , select Automatic
You can also see the following article for more information:
Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
http://support.Microsoft.com/kb/952272
Hope it will be useful. Incase if you have further queries please reply and we will be happy to help you.
-
Common mistakes made by Volume Shadow Copy Service
Description: Volume Shadow Copy Service error: a critical component required by the Volume Shadow Copy service is not registered. This can happen if an error has occurred during installation or during the installation of a shadow copy provider. The error returned by CoCreateInstance on class with CLSID {e4eb5095-f587-4159-a1d8-2710692fd243} and name SW_PROV is [0 x 80040154]. Operation: Get an interface that can be called by for this provider interfaces list for all providers support this context delete Shadow Copies: provider ID: {24602736-bed9-4619-91b0-243447c6409c} class ID: {e4eb5095-f587-4159-a1d8-2710692fd243} snapshot context: 0 snapshot context: 0 execution context: Xml events coordinator: 22 2 0 x 80000000000000 0 Application 541340
Hey Mike, this problem started after that you have installed Service Pack 2?
If so, I recommend you as to uninstall SP2.Also, have you tried to do a restore of the system to a point when it worked?
¢ ¢
}
----- -
"Microsoft Volume Shadow Copy service has stopped working"
I hope that I have the right forum for my question.
I get the message pop up following several times a day: 'Microsoft Volume Shadow Copy service stopped working.
It gives me the opportunity to find a solution online and when I click on this option, the message disappears and nothing happens.
If anyone knows how I can solve this problem, I would be grateful of your.
Thank you.
Bob
Hello
Sometimes a reboot will fix this. You can also try a system restore to a point before it started happening
If possible. And it could be damaged.How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.html----------------------------------------
Also that to help clear corruption:Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html---------------------------------------
Check its default settings and dependencies here:
http://www.blackviper.com/WinVista/services/Volume_Shadow_Copy.htmPhantom memory also holds your restore VSSadmin points it defines parameters.
Control Panel - Backup & restoration Centre
Adjustment of the amount of disk space, System Restore uses for restore points
http://bertk.MVPs.org/html/diskspacev.htmlHow to change how much Space System Restore can use
http://www.Vistax64.com/tutorials/76227-system-restore-disk-space.html
http://www.Petri.co.il/change_amount_of_disk_space_used_by_system_restore_in_vista.htmShadowStorage vssadmin commands
http://TechNet.Microsoft.com/en-us/library/cc755866 (WS.10) .aspx
http://technet2.Microsoft.com/WindowsServer/en/library/89d2e411-6977-4808-9AD5-476c9eaecaa51033.mspx?mfr=trueGuide to Windows Vista system restore
http://www.bleepingcomputer.com/tutorials/tutorial143.htmlExpiration errors occur in Volume Shadow Copy service writers, and shadow copies are lost during
backup and at the time when there are high levels of input/output
http://support.Microsoft.com/?ID=826936A good utility:
Explorer of the shadow - free
http://www.ShadowExplorer.com/Rob - bicycle - Mark Twain said it is good.
-
I have Windows Vista Home Premium (32 bit) and you cannot create a system restore point. Despite all attempts, I keep getting the error message "storage insufficient to create the shadow copy storage file or other shadow copy data"(0x8004231F). " There is a large hard drive space (90 GB free with)< 70="" gb="" used). ="" how="" can="" this="" be="">
Hi rebick,.
Welcome to Microsoft Answers Forums.
We would like to get more information about you to help solve your problem. You better, please answer the following questions.
- When was the last time it worked?
- Remember to make changes to the computer recently?
First of all, I would say that you unplug any external drive connected to the computer except the keyboard and mouse.
This error message can occur if there is some system files corrupted on your computer. Suggest to run a SFC scan, which would be a search for system files corrupted on the computer and replace them.
Scan SFC enforcement procedure:
1. click on the Start button
2. on the Start Menu, click all programs followed by accessories
3. in the menu accessories, right-click on command line option
4. in the drop-down menu that appears, click the "Run as Administrator" option
5 If you have the enabled User Account Control (UAC) you will be asked to consent to the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.
6. in the command prompt window, type: sfc/scannow then press enter
7. a message is displayed to indicate that "the analysis of the system will start.
8. be patient because the analysis may take some time
9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue
10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
11 after the scan finished, close the command prompt window reboot the computer and check.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista.
For more information please visit the link below.
How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
http://support.Microsoft.com/kb/936212
If the step above does not resolve the issue, I would say that you create a new user on the computer account.
Log on to the new user account and check if you can create a system restore point.
- Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
- Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- Click on create a new account.
- Type the name you want to assign to the user account, click an account type, and then click on create an account.
http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Failure of Windows backup while trying to read from shadow copy on one of the volumes to back up
Original title: how to fix the cliché has failed during the backup
Using Vista Home Premium Svc Pk 2, I get the "cliché failed" and did not finish the backup. How can I fix it?
Hello
1 did you change on your computer before this problem?
Follow the suggestions and see if it helps.
Method 1
You can follow the steps in Windows upward and the startup type of the service Volume shadow on automatic
(a) click Start .
(b) in the search box type Services.msc
(c) make a right click the service and go to Properties.
(d) select Automatic from the Startup type of the menu drop down.
(e) click apply and OK.
(f) restart your computer.Note: Once you restart the Volume Shadow Copy service all restore points will be deleted.
Method 2
You can run the System File Checker.
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833Method 3
You can also run the disk check.
Check your hard drive for errors
http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors
Note: You may lose data while Windows tries to repair bad sectors on the hard drive.See also:
Back up and restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questionsWindows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
http://support.Microsoft.com/kb/973455
Note: The article is also applicable to Vista.
-
System Restore does not start and the creation of a shadow copy times out
What should I do if the system restore does not start, when creating a shadow copy times out?
Hello
Thank you for the question to Microsoft Community. I'll give my best to help you.
1. don't you make changes to the computer before the show?
2. What is the accurate and complete error message you get?I suggest you try the steps suggested by Gokul T on September 8, 2010 and see if that helps.
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/system-restore-will-not-start/16c201d3-3932-40e4-883C-502f701b077f -
Can't update or restore? The shadow copy of volume? problem
The last time I could work happily without errors was right until I downloaded IE9. I have a x32bit. Dell PC and have Windows Vista Home Basic. I can't do updates longer without error codes (80040154) as well as since I bought it, for some reason, I've never been able to use the system restore it always comes back with the unfinished system restore. I'll try to run now just to see what error message is.since I did not note. Can make backups, I noticed just recently, but did not have one yet.
The problem that I continue to have is that I get an error message stating "the Volume Shadow Copy used by the system restore does not work. See the event log for more information. (0x81000202). "I think that my system is unstable. I no longer, since IE is unusable since October last I now use Google chrome or Mozilla Firefox. A factory re install easier than anything else. Please advise I have tried several times to follow the instructions given by others and it never works.Asked for a 3-4 years old Dell would be of any effect to all the factory re - install? Which means it would be easier to fix the problem otherwise. In any case, please advise as soon as POSSIBLE to let it just the way it is if you think I don't no need for updates, etc. I use the PC for research and e-mail. Not much. Long-term I can't help him. I never know if I have given you enough information. Thank you so so much.Hello
-Don't you get an error message when you try to use Internet Explorer 9?
Follow these methods and see if they help,
Method 1: Make sure that the services associated with the restoration of the system are started and set to automatic, to do this, follow these steps:
Services related to the restoration of the system are:
-Volume shadow copy
-Multimedia Class Scheduler
-Remote Procedure Call (RPC)
-DCOM Server process Launcher
Plug-and-Play.
Follow the instructions below and all above defined services to automatic.
a. click the Start button and in the search box, type in: Services.
b. press "Enter" to open the Services window.
c find related services that are listed above and check the status (start) and the Startup Type (automatic).
d. double-click the service to change the status of started and set the startup type to automatic.If the problem persists, try this method.
Method 2: Performing a System File Checker (SFC) Scan on your computer.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
Check out the link for more details below:
With regard to the error code 80040154, I suggest you to reset Windows Update components and check if that helps.
http://support.Microsoft.com/kb/971058
What about Internet Explorer 9, reset Internet Explorer and check.
Disclaimer reset Internet explorer:
WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
Shadow Copy Provider cannot create system restore point error Ox8004230F?
When I try to create a system restore on my Vista operating system, you get the above error message.
I have entered what has been suggested in the forums and Services.
What should I do now?
Thanks for you help.When researching other forums via Google, I found this in 'My Digital Life '. It solved my problem so I post here to help people who may have tried all the "fix - its" that did not work!
"The error occurs because the Microsoft Software Shadow Copy Provider service is stopped or disabled. The Microsoft Software Shadow Copy Provider Service manages shadow copies of volume based on software taken by the Volume Shadow Copy service. If this service is stopped, shadow copies of volume based on software cannot be managed. If this service is disabled, as when you manually disable the snapshot, all services that explicitly depend on it will fail to start. "
The Shadow Copy Provider MS and the shadow copy of Volume must be enabled. With my problem I'm not far enough to allow the Shadow Copy Provider MS. When I did, it has allowed me to create a restore point.
Thank you.
Maybe you are looking for
-
Additional window of Firefox in Firefox
Hey all,. I know the title is confusing and doesn't mean anything, but I couldn't find a better way to describe it. This is what it looks like when I open firefox: http://screencast.com/t/glp7JP8q Grateful for your help!
-
Re: Satellite P200 - 1FC - what DVD burners are compatible
Toshiba Satellite P200 - 1FC - need advice as what to buy to replace the dvd burner that does not burn.So is going to replace. Thank you ricky
-
I continue to have offered the same updates even after I downloaded it
I get the same updates available even though I've already downloaded successfully
-
Help restore the temporary files
I just restored my Dell Dimension 4700 to factory settings, but before I did, I used the file and Transfer Wizard to transfer all my files on an external hard drive up, but I don't know how to restore them now that I am up and running again. They se
-
In order to solve problems that result from a problem with a vpn connection, where the router contains an ios firewall, knowing the correct controls are essential. What are the proper commands that should be used for the display of information relate