application without user login

Similar Questions

• Webcam loads a blank page without user login.

  When I open the website for my remote webcam, it shows a blank page without user interface such as login or password. It opens in IE and my Android, but not with Firefox.
  My stuff:
  W7 Ultimatex64 with 8 GB
  NETGEAR WNDR4500
  The remote DVR is a LTD-7908

  I found this and it works AWESOME.

  IE Tab-2 for Mozilla

• is it possible to install the application without user interaction? in the background?

  Hi, is it possible to do such a thing:

  device ask the server for an application, the server responses and address 'Give me' I can download a *.cod file. is it possible I want to download (and install) without user intervention? I have average-not browser opens, the user clicks on what whether etc application will be downloaded in the background without user interaction? is this possible? and if yes how?

  concerning

  Use IOUtilities.streamToBytes to read the file directly in a byte array.
  use createNewModule with the byte array to create a new module.
  Use saveNewModule to save the module, enter the promptForResetIfRequired() if necessary.

• I was able to do DBUM can recon trust without user login mapping

  Hi all
  
  
  Is it possible to do dbum approved reocon without mapping field User Login? , Because it's going to create automatically using the handler to process mail.
  
  I am able to recon when I map userlogin otherwise not. But my need is userlogin shud create automatically. How can I achieve this
  
  
  Any suggestions?
  
  
  Kind regards
  
  user7609

  This approach will work very well with first recon time (new user) and you do not need to do anything extra.
  But, the problem occurs in the case of update (next time the same user recon). As the userlogin is mapped with the source to the target and you changed using the process post event handler. Thus, the same record, it will consider also editable and it will again try to update the connection of the current user. Yes, you can call your handler on update as well. While it will update again to the previous. It will be worst approach. beacause, it will treat the same record always.

  Again, I suggest. Better go for the transformation. which will serve your purpose. In this case you need not map the connection of the user to the source of confidence. transformation class will generate the user login during the prior insertion.

• Creating an application without a head without a user interface

  I use the NDK for about 2 weeks now and I can't seem to find any resource on the following blackberry Web site.

  I am creating an application without a head that would run every 24 hours on my blackberry.  I have the app created with Momentics headless and it does what I need it to do. But right now I need to have a button in a user interface to call him.

  What I'm trying to do is,

  1. Have created enforcement wihtout the need of a user interface for packing it or deployment using our company BES.

  If you can point me to a tutorial or an example that would be great.  Of course if you have a response to these two that is too !

  Thank you

  Lothus.

  Watch the timer shutter release for app without head, code snippets and explanations can be found here:
  https://developer.BlackBerry.com/native/documentation/device_platform/headless_apps/triggers.html#TI...

  If you need a more complete example, I can create one, but I don't know when I'll have the time to do it, he could be close to mid-January. But honestly, all the necessary code is already in the docs.

  Don't forget to register action TIMER_FIRED in your bar - descriptor.xml under your app without a head part, I think it is also covered in the docs.

• Preparation of desktop + default user login

  Occasionally, when I start my laptop Windows 7 Ultimate, instead of the 'Welcome' screen and a login prompt for the user by default ('B'), I get "Readiness Office", then the login for the user by default ('B') prompt. After a successful login, I get a new office and default user privileges 'B '. No files or other inerference profile to the default user 'B' will appear. To fix this, I restart or shutdown. Then start up, usually, I welcome and one for the default user login screen. After login, I have all the stuff for the user 'B '. It happens randomly without error message to the previous closure or the new connection. Any ideas?

  Hi BobThurmond,

  Method 1: First of all, you should try to check and safe mode if the problem persists.
   
  Follow this link provided below to start your computer in safe mode.
   
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
   
  Method 2: If the problem does not happen, I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 3:

  If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Now search for the question.

  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  In addition, You can also use Event Viewer to search for information on the problem.

  Here is an article on how to do it:

  The display of the error messages in the event viewer
  http://support.Microsoft.com/kb/947321

  You can see for more information on the issue at the time where it occurred.

  You can post this information here to help us narrow down where the focus.

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• dialog without user interaction

  Hi all

  I would like to use the dialog a button that would just show a message without requiring any intervention from the user.  With the dialog, I want only to display a message to the user. I want the program to continue to function without needing user interaction.  I just want to inform the user that something has happened.  I don't need the user to do anything.  How do I do that?

  Yik

  A more common approach is to use a "register of status" (just a string on the user interface which allows the user an idea what is happening.)

  Here's a building I often use (place the 'Status' command on the user interface, add a control to the referance over 'Status' the connector pane).  This type of engine of the action (see the excellent Ben nugget) allows you to send update messages to the user from anywhere in the instance space application without pop ups all over the screen.

  

  And if you prefer, you can add cases show, blinking eyes, unblink, select, move, or hide the indicator then reads out and dances

• Microsoft FixIt fails with the error 0x80004005 when run in the Standard user login

  Microsoft recommends running in a Standard user login.  However, the FixIt will not work in a Standard user login, even if started with "Run as Administrator".  It comes up with an empty window of FixIt if started without "Run as Administrator".  If started with 'Run as Administrator', it fails with the error: 0x80004005.  Don't miss this way 'by design', given that Microsoft must often State?

  Thank you

  el_abuelo

  Hello El_Abuelo,

  I went to the site you have included but the beta for Windows 7 users is full and I can't test what you are experiencing. They give you a site to give feedback on the beta product? If so, then please send a mail telling them of your question. If you already have a fix Center account, please log in to access your account on the site of difficulty It Center.

  If they don't give you a place for your comments, you can use the General Windows 7 comments page and don't forget to clarify that it is the Fix It center beta product for which you give your comments. Clickhere for a link to the forum Windows 7 comments.

  Thank you for making the point about your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Scoreloop, set the user login

  Hello everyone;

  I want to change the display/user login / drive on the server Scoreloop and I used this code:

  SC_User_h user = SC_Session_GetUser(session);
  SC_Error_t err =  SC_User_SetLogin(user, "MyLogin");
  err =  SC_UserController_UpdateUser(userController);
  

  but it has not changed on the server, although the error value is '0' which means OK.

  Thank you in advance.

  Hello, William;

  When I called 'SC_User_SetLogin' function inside the callback function it wasn't working, but when I called him in the same function as I asked the user, then it works like this:

  SC_Error_t rc = SC_Client_CreateUserController (customer, userController, RequestUserCompletionCallback, app);

  RC = SC_UserController_LoadUser (userController);

  The SC_User_h user = SC_UserController_GetUser (userController);
  RC = SC_User_SetLogin (user, "my name");
  RC = SC_UserController_UpdateUser (userController);

  In any case, I noticed that the application is connected to the game application that is installed on your device BlackBerry 10

  who, from there, the user can update his profile name and connect as will.

• Reading, replying, deleting messages from Message Hub without user interaction

  I need access to the hub of the Message to read the messages/email from particular sender.  The app would have read the message, extract information such as the e-mail address of the sender of the message and reply to the sender. I want to achieve this goal without the user intervention or interference to end of self-test.

  For example, I get a message in the Blackberry hub, Application research and read a message from a specific sender. It retrieves information and answers back to the sender. After the response is sent, the message should be deleted. But this should happen as soon as the Application is started. There is therefore no interference of the user while encoded in the files of the CBC.

  There are some Message PIM application example that does something similar. But there is user interaction required to send the message. I have a few minor changes and hard-coding an email address. It sends an email to this address, but I need to press the button 'send '. I want to do as soon as the application is started without interacting with a graphical interface to test the object.

  Is it possible to do it in the background and the GUI only shows information such as the email/message received, sent to answer?

  I read the reference to MessageService, Message etc to the http://developer.blackberry.com/native/reference/cascades for more information on the API.

  In fact, you can. In the example of Messages , the "Send" feature is attached to a button, so you can raise yourself when you play with the app, but really you as a developer could haved called at any time... It's that they function key:

  void MessageComposer::composeMessage()
  {
      const MessageContact recipient = MessageContact(-1, MessageContact::To, QString(), m_recipient);
      const QByteArray bodyData = m_body.toUtf8();
  
      // Create a message builder to create/modify the message
      MessageBuilder *builder = (m_mode == CreateMode ? MessageBuilder::create(m_accountId)
                                                      : MessageBuilder::create(m_accountId, m_messageService->message(m_accountId, m_messageId)));
  
      builder->subject(m_subject);
      builder->removeAllRecipients();
      builder->addRecipient(recipient);
      builder->body(MessageBody::PlainText, bodyData);
  
      // Send the new message via current account
      m_messageService->send(m_accountId, *builder);
  }
  

  However, this does not require permission to access_pimdomain_messages, which most of the users will not give you unless you have a good enough justification (because it lets you do things like that).

  What you can't do, is use the card of composer of email without user interaction, which is normally how you would like to send an email. This does not require the permission of messages, such as the user has total control over what is sent (if anything).

• Can we install COD files without user intervention

  Hello

  I have two questions

  (1) can I install COD speed without user intervention (for example: in a jsp page page I wil point to the jad file)

  and if they click on the jad file, it should automatically install without askin for any guest user)

  (2) after the installation of the cod file and when the user runs it will ask for the connection to the http site I mentioned in

  My midlet. It can be direct without the prompt of the user.

  He has not designed a how to bypass security, because that would be a big security problem.

  There is no default security settings that are applied to the newly installed application, and application permissions could be edited as well. If the device is not on BES permissions are changed by the user. You can look at the options > Advanced Options > Applications > Menu. By default, application has no permission to create the connection to the network. In newer operating system, you can ask the user to activate certain permissions using http://www.blackberry.com/developers/docs/4.3.0api/net/rim/device/api/applicationcontrol/Application...

• Windows user login will not be displayed

  Laptop Acer 5742 G (upgrade to 1 TB HARD drive)

  Problem: User login Windows is not appear.

  History:

  I wanted to fast my laptop at the start and so I did the exercise verified and I edited programs and services to load at startup, after that I got a new start, all services were disabled, put them on automatic and I run even if that bit of wouldn't start. After that System Restore might work, I restored it 2 days ago. He didn't restore properly because my anti-virus has been on and so I closed and he again. Now every time I boot my OS the Windows user login will not be displayed even in Mode without failure or last good Configuration, it keeps black.

  What can I do? Thanks in advance...

  
  And in the meantime when I continue to press ALT and quickly hit F10 for eRecovery Acer in the trunk, will not work as well.

  Hello BrickBone,

  You need start using the Windows 7 installation disc and try startup repair options.

  If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the installation disc of Windows 7 or a USB flash drive or with a system repair disc if you have created one previously.

  To use this method, you need to restart (boot) your computer using the disc or USB flash drive.

  1. Insert the disc to install Windows 7 or USB flash drive, or a system repair disc, and then turn off your computer.

  2. Restart your computer using the power button on the computer.

  3. When you are prompted, press a key, and then follow the instructions that appear.

  4. On the page install Windows, or on the System Recovery Options page, choose your language and other preferences, and then click Next.

     • If the page install Windows or the System Recovery Options page appears, and you are not prompted to press a key, you may need to change some settings of the system. To learn how, see start your computer from a disk to install Windows 7 or USB flash drive.

  5. If you are using Windows or the USB flash drive installation disc, click on repair your computer.

  6. Select the Windows installation you want to repair, and then click Next.

  7. In the System Recovery Options menu, click a tool to open it.

  Select the Startup Repair option.

  Let us know if that helps.

  Marilyn

• Set point as user login name

  Hi all

  APEX 4.2 on Oracle 12 c

  I was wondering if it is possible to define an element as the user login name and then do read-only

  So let's say that:

  -l' user

  -text field is defined as the user name

  -text field becomes read-only

  I guess I need a dynamic action with PL/SQL code, but I don't know how to get the user name

  Any help appreciated

  Thank you!

  CHRI$ says:

  I was just able to fill a text element with the name of the current user using the API

  DECLARE

  VAL VARCHAR2 (100);

  BEGIN

  VAL: = APEX_UTIL. GET_USERNAME (p_userid-online 228922003);

  END;

  problem is they want to do without the username and that must be completed based on the current user ID (perhaps a nested function would work?)

  I wish I could show a chart for different users and the result of the chart is based on the user name in the text element

  Or APEX_UTIL. GET_USERNAME (where even you have the digital ID of?), or additional text are needed. Simply refer to the variable binding (: APP_USER) syntax of the substitution string APP_USER under the user name required in the source of chart series query.

• Configure the automatic updates without user intervention.

  How to configure the CC for the auto update without user intervention (without right of admin)

  Hello

  Please see the document below for help:

  Upgrade to Adobe Creative cloud 2015 applications

• Photoshop elements 13 is incredibly tiny on my laptop it makes this useless application, I have a laptop 13 inch.  can you tell me how to make the largest application without changing my screen resolution?

  Photoshop elements 13 is incredibly tiny on my laptop it makes this useless application, I have a laptop 13 inch.  can you tell me how to enlarge the photoshop application without changing my screen resolution?

  Well good for Photoshop to fix this, I chatted with technical support and they have a new version of 13.1 to. I've updated, then went in the preferences and found the preference of the user interface, select 200%. Who did the trick.