Simple Eye - fi a99 / Wi - Fi card Firmware Adjustments - REQUESTED

Similar Questions

• Satellite P100: Intel Pro 1000 PL LAN card - firmware update

  Hello!
  Is it possible to get the update of firmware for Intel Pro 1000 PL LAN with Smart Deep Power Down function disabled card? I have a few problems running freebsd, and some people suggest that this is the problem.
  See you soon,.
  MIK

  Hello

  Sorry, but I think I put t understand you well.
  Are you looking for an update of firmware from the LAN card or did you mean the LAN card drivers?
  To my knowledge, there are only drivers for network card and I never heard of updates of firmware set apart on the CD/DVD drive.

  In any case, on the Toshiba page, you will find different LAN drivers for different LAN cards. It depends on the model you own.
  There are 3 different models of P100, so you must select one that suits.

• How to make simple audio measures with a sound card?

  Hello

  I have audio simple (level, THD, frequency) of the measures in LabVIEW with a sound card.

  The audio signal is a sinusoidal 1 kHz analog single.
  I know it's better to do it with a real audio Analyzer, but it would be a significant investment.
  So, how can it be achieved with a standard of PC sound card? Thank you.

  I have a measurement of base (amplitude, frequency) with the following code:

  

• DELL UPS Network Management Card firmware update is not possible in the management of inverter DELL Multi console

  I have a problem with the update of some old software on a DELL UPS Network Management card in DELL Multi UPS Management Console.

  We have a few more recent and some models with very old Firmware. The older firmware is: 01.02.0013
  I imported the update of the firmware: 01.16.0001
  If I select this version behind the inverter with firmware 01.02.0013 it is a red exclamation point.

  

  Also, I can't get to the this inverter https address.

  So I do not know how update the firmware of the network management card, please anyone who has a solution...

  .

  I got it finally working.

  I couldn't connect to the interface webGui of UPS in https on IE 6,7,8,9 and calibrated to an ssl error Firefox.
  I could not update the firmware using DELL UPS management software can. fatal error.

  I then installed Chrome, when connecting to the web GUI I ignored the warning of certificate error and waited...

  YES. The web Gui appeared, asking for the password and the Web GUI that I could install the firmware 01.14.0003

  After the update of the firmware in the webgui I was able to upgrade to 01.16.0001 in DELL UPS software Multi management.

  

• Any simple way to automatic test of FPGA card?

  I'm looking to create a simple self-test for a 1042 q populated in LabVIEW PXI chassis. The VI DAQmx Test auto works for most of the cards, but card 7853R FPGA is also present in the system. I wonder if anyone is aware of any simple way to perform a self-test on this map?

  It is not a built-in simple only for a self-test card FPGA as there is a standard DAQmx map. The reason for this is that DAQmx self test accesses the firmware of the card and performs some basic checks here. There is no such firmware on the FPGA card because the FPGA card allows you to build your own underlying software for a device.

  If you want to check on good communication with the FPGA chip, you can try to compile a white VI to the chip. If you need the functionality of IO control you will have to put some basic features in VI, but it shouldn't take a lot of time development.

• Tecra 9000: SD card reader does not work with XP

  I've made some progress on this issue, it seems that Cardbus devices cannot share IRQS, although the main problem is that FFDFB200-FFDFB3FF memory address is shared by the SD card controller and device memory SD card. Unless we find a way to edit the registry to resolve this conflict of memory, the simple answer is that the SD card reader does not work under XP.

  I think that it would take a major surgery of the register or re-writing of drivers to move the address of memory used by the SD card device, I always work on this for now.

  Can someone support Toshiba or Toshiba Marketing explain to me why my Tecra T9100 has a "Designed for Windows XP and Windows 2000" sticker on it, when Toshiba does fully support XP on the 9000 series?

  David

  [Edited by: admin]

  Hi David

  Unfortunately, I n t think that you will find here a Toshiba marketing person or other departments. It is ONLY a user to user forum.

  What you say, it is simply NOT true.

  The Tecra 9000 was delivered with 3 different OS.
  It was delivered with Windows XP Pro, W2k and Win98. You can order all the images of this Toshiba home Toshiba service partner. That's why Tecra 9000 does support Windows XP!
  Tecra 9100 has been bundled with Windows XP and Windows 2000 and also supports Windows XP!

  Of course, there are different models with a different hardware configuration, but all supports Windows XP.

  I put t know why you get this error message or why you cannot use the SD card, but I guess you don t use the image of Toshiba. That's why you installed your operating system isn't properly. Because you are a newbie you don t know the Toshiba all the driver installation must be done in the right order and all Microsoft QFEs must be installed also.

  As you can see you must pay attention to many important things if you want to manually install the operating system.

  Good day

• Problem writing to SD cards

  
  

  Hi Dave,.

  Just thought I would give you the good news. This morning, I got an answer from SanDisk. That's what they told me to do

  "If the lock switch is not on lock:
  1. set the switch up and down. Repeat this 3 times.
  2 let him stay on his position of locking for 30 seconds.
  3. slide the switch upward to unlock the card.
  4. try to transfer files in the device. »

  I have no idea what it is (why three times, and why 30 seconds!)-it seems crazy that it's so simple - but it works! The card is no longer protected in writing, and I record the files on it.

  I hope it helps someone else - I can't be the only one having this problem... can I?

  Thank you for taking an interest.

  MM

• Satellite A110 - 159 hangs when it is connected to the LAN card

  Hi, can anyone help?
  Can I find somewhere the LAN card firmware update? When I connect to my laptop with a built-in LAN card cable it breaks down, if it s connected the wireless, everything is ok, no crashes.

  It only happens once, after reboot ok, until the next stop and wake up. It s annoying.

  Have you tried to reinstall the card LAN and LAN driver?
  What operating system do you use?

• Satellite A100-028 - How to replace the mini-PCI WiFi card?

  Hello

  I want to replace the Intel with a Module Atheros wireless card.
  Unfortunately on the background there is no cover for the mini PCI Slot.
  Where he is? I guess that they are under the top cover or under the keyboard.
  Should I a short "How To" in this way:
  Which screws I release that covers and so on are to be released.

  Thanks in advance.

  Hi Galdor,

  It of not simple to change the W - Lan card.
  The card ist under the keyboard and under the top cover.
  You have to disassemble the entire and when you do that you lose your warranty.
  I think it's the best for you to contakt a service point for this work.

  Greet
  Thorsten

• How can I prevent the launch Photos when I plug my SD card

  Whenever I plug in my SD card, Photos launches and interferes. How can I stop pictures to do this? I tried the preferences, but the option was not there.

  It's pretty simple, when you plug your sd card just to check the box that says "open photos for this device". It's in the section import the photos app.

  After that it should fix your problem.

• Stream of 6537 s on the drive with another card as well.

  Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than that, but we can't go much more slowly. We need to store the result in a known file format so we can analyze it later.

  From the example of reference for data streaming of double PCIe 6537 s example of disc (http://zone.ni.com/devzone/cda/epd/p/id/5315), it seems simple enough to add another PXI card.  We are OK with that.

  What is the best approach to take the card sync?

  Our first choice is so far:

  To read a value from the sync every time it happens around the loop of the producer; i.e. every 20ms. This will taste at 50 Hz, but that's OK. Store us the values in a table of fixed value size zero and push the table on the queue at the end of the case 'true '.  It's easy enough but... The 3 1 d Raw U32 DAQmx readings work quite quickly to allow the Syncro values to the queue, in the 20ms window? (We have operated there should be about 16 MB of data per card for each reading). If not, is it close enough that he could be twisted so that sync data can be queued as well?

  Our second is:

  We plan to read data in sync in a zero arbitrarily large array initilized, especially if we know the size when write us data to the file. This can be filled at 20 Hz, in what I'll call (or the love of argument) a producer of the second loop. We could protect access using semaphores. In the loop of consumption, we read the three blocks of data, then data sync; That is to say:

  • read three lots of the queue database
  • lock the semaphore
  • write the content of the table
  • zero the content of the table
  • unlock the semaphore

  Does anyone know of a decent/better way to do this?

  Are we on track?

  Thank you

  Jon.

  Hi Jon,

  Yes, I think that your hypothesis is correct.

• Close the network card?

  I have a machine that I have leveled off for XP Pro SP3 because I have a few HW record that ONLY works on XP.

  I want comtrol machine including = WOL WakeOnLAN remotely.

  I had an old IBM Thinkcenter used for recording HW, but I want a bit more powerful machine of Noah - let's call it MC.

  The MC has been running Windows 7 before but now ranked out of XP Pro SP3 and it works fine - with the exception of WOL installation.

  I simply does not work and I see that the network adapter is SHUT OFF when the machine is turned off - the old IBM ThinkCenter I can always see the LED light when it is turned off.

  I beleave there are new drivers for the network card, but I checked the settings on the parameters WOL and I did also the settings in the BIOS.

  Still no light in the LED on the back of the RJ45 of computers. Also I see no light on the swichport where the MC cable is inserted into the switch.

  It is on the Ethernet card on board and it is a NVIDIA nForce 10/100/1000 Mbps Ethernet with "drivers".

  What can be wrong here and how I can fix the problem?

  You may have read my first post that I deleted later because I had completely misread your post before responding.  As I said then, Wake on Lan is controlled by the motherboard and firmware of the NETWORK adapter, it is not dependent on the operating system, a compatible computer without any OS installed WOL can be started by WOL providing that it is properly enabled in the BIOS and NETWORK card firmware.   Windows (or other operating system) really has nothing as such to do with function Wake on Lan, the extent to which any OS with WOL is limited because it can enable the feature in the firmware of the NETWORK adapter through the drivers or other utilities provided by the manufacturer of the device.  If it worked before then you know that the computer is able to do, was not because Windows 7 has been installed, it worked because it has been correctly configured in the firmware of the NETWORK adapter and the BIOS.  When you installed Windows XP it is most likely did not have the drivers for the NETWORK card and it may have reset the NIC to default settings that cannot be reset correctly with the drivers you have installed later.  Have you installed the card mother/chipset drivers?  They may be needed for other drivers work correctly.

  Wake on Lan has everything to do with the BIOS, it is implemented by the motherboard.  If your computer is capable of WOL (which we know that it is) there is an option for it in the BIOS, it might be under a different name, like "Power Up on PCI device" or something else.  If you don't see a power management Option in the BIOS, it might be in the advanced settings, it's there somewhere.  If Windows can have changed WOL BIOS settings during installation is something that I don't know, but I can tell you that Windows can change some settings in the BIOS, you can adjust the timers BIOS to start the computer at scheduled time so who knows what he might be able to change.

  John

• my HP PC under XP Home Edition will not read my SDHC 4 GB card

  My Hp desktop computer has worked with the 4gig card previoulsy and my laptop running XPPRO readingthe OK card works, BUT the bureau now hangs when I try to read from the SDHC card.

  In some cases, a simple driver update will allow the card reader work with SDHC cards.  HP has a very good Web site for display of driver updates to their computers.  Just go to http://www.hp.com, click on the tab "Support and drivers", enter your computer and operating system model number and you will get a list of the latest drivers for your computer.  Check to see if there is a new card reader driver you currently have on your machine.

  Do not forget that some readers of old cards will be able to read SD cards any driver is installed.

  HTH,
  JW

• Update easy firmware Suggestions

  Something simple, Sandisk can do in the next firmware update to improve this Sport Clip (without too many problems):

  Easy: 1) to return to the song played instead of the Main Menu.  Treat the guys of circuit breaker; How in the world can people EQ the song if every time they have to navigate the main menu again? The solution is a simple redirect command. SanDisk, please?

  (2) either a "now playing" feature or a way to stop the song played restart whenever you navigate backwards and press it again. Navigation becomes much easier because I won't have to worry about the song in the middle of play restart every time that I press by mistake about it. Indeed, this will also be much less troublesome 'A' problem.

  Thank you Sandisk and consider, if you please!

  When you press the back button and it goes to the main menu and then press the back bitton again and he will return to the screen reader.

• WRT54G v5.1 - firmware update

  Hello world

  I have a very simple question about the update of the firmware. I have a WRT54G v5.1 Lynksys support download page and when I have to choose the correct hardware version, there is only listed v5.0.

  I want to just make sure that it is compatible with my v5.1.

  Thanks in advance!

  / Sofian

  I think it is compatible.