Applications store endangered?

Similar Questions

• I've removed the Application Store in my area by mistake, how do I reinstall it?

  By mistake I deleted the Application Store in my area and impossible to reinstall, how do I do this?

  Have you unpin it or uninstall it?

• Smartphone blackBerry applications store icon missing

  I was downloading applications from the app store and has been invited to restart the phone only to find the icon store apps missing... what gives?

  Go to Options > device > application management.  Find the AppWorld and select it with your trackpad, and then press delete.  Your device will require a reboot to completely uninstall the application.

  Follow the instructions to reinstall AppWorld above.

• Cannot download any new application store.

  Since last week, I am unable to download any app store. Download stops at 54%, 76% and stuck there. I use the modem 3g Airtel

  Hi Shashank,

  Please contact Microsoft Community,

  I can understand the inconvenience caused, we're here to help with your concern.

  This behavior can occur if the Windows Store cache is corrupted, the application settings are incorrect or if the application is not updated.

  Method 1:
  I suggest you to clear the cache to store and check if it helps.

  1. Press ""key Windows + R ". "
  2. Type wsreset.exe , and then click OK.

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Why can't find or install the application on the Windows Store?
  http://Windows.Microsoft.com/en-in/Windows-8/why-find-install-app-Windows-store

  Hope this information is useful. If you have additional questions, please get back to us and we will be happy to help you further.

• Windows 8 Applications Store does not update

  I had my computer since December. It's a Sony VAIO laptop preloaded with Windows 8. I had no problem with the store until recently. If I tried to open it, it would just go to the start screen and stay there. I was told to clear the cache of the store, so I did. I can now use, but my applications will not update and I can't, either. Two errors happen when I update; "Something has happened and this app could not be installed. Please try again. "Error code: 0xc80003f9" and "Before you can use the Windows store, you must restart your PC to complete the installation of an update." There is no such update when I restart or shut down my computer. In the section 'Your applications', he said, "we will have some problems to the list of applications you have. Please try again later. "How can I fix? I am a technical person who is skilled in the use of the computer, but I think that it is a problem with the store servers.

  Hello

  Thanks for posting your query in Microsoft Community.

  It appears from your description, you are unable to update Windows Store apps with 0xc80003f9 error code.

  I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer?

  2 have you tried to run Windows Update? You are able to install Windows updates?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1:

  Run the app from the link below and check off troubleshooter.

  What to do if you have problems with a soft

  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Method 2:

  I suggest you run the Windows Update Troubleshooter and check if it works.

  a. press the Windows key + C to display the bar of charms.

  b. type Troubleshooting , and then click solving problems under settings.

  c. now, type Windows update in the search option.

  d. click the Windows Update Troubleshooter to run the troubleshooter.

  This problem is probably due to apps being descended from the store for repair or upgrades. I suggest you to update the application after following the steps above.

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• I have window 8 whenever iam to install any windows application store displays error 0 x 80070426 and when iam open my microsoft account he signed in

  I have windows 8 when iam going to install from windows app store shows that your purchase is not complete and it displays error 0 x 80070426

  Hi Sandeep,

  Do you use a proxy connection to connect to the internet?

  You could deal with the issue because of some changes in the Windows store settings, or there could be something wrong with the Microsoft account.

  Follow these methods and check.

   

  Method 1:

  I suggest to refer to the following article and follow the steps. Here is the link for your reference.

  Why can't find or install the application on the Windows Store?

  http://Windows.Microsoft.com/en-us/Windows-8/why-find-install-app-Windows-store

  Method 2:

  I suggest you to clear the cache to store and check.

  Follow these steps to do so.

  (a) on the screen, press Windows key + R to open the Run dialog box.

  (b) type WSReset.exe and press enter.

  Method 3:

  Disable the third-party antivirus software

  If you have any third-party software installed on the computer, then I suggest you to disable the antivirus software and check.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  I suggest you run the troubleshooter Microsoft account and check. Here is the link for your reference.

  http://go.Microsoft.com/fwlink/?LinkId=268424

  Feel free to write us if you have any other questions related to the issue. We would behappy to help you.

• Some applications store data in the folder my documents...

  Is it possible to transfer the files resulting to my library folder or to a single folder off the beaten path?

  Otherwise, I guess I could create my own 'My Documents' folder.

  Some programs store information in the Documents folder. Some may be moved and others not. If you do not want a mixture, then you should probably create your own 'My Documents' folder.

• Media application store multiple copies of videos

  I have an Acer laptop with Acer Cloud installed on it and I chose to use the folder my videos in the media app Acer.

  After doing so I have foud this is to store multiple copies of the same videos in the cloud (even if I don't have one of each), why is what is happening and how can I fix?

  I fixed it by removing all videos (but not the originals) and time all the video directory. Still not sure why this happened.

• What is a fast alternative to starting a business of DPS app if Apple Store rejects the App? We are in a long time and can't wait for Apple. We host the application elsewhere. How we host our DPS application on the website of our customers?

  What is a fast alternative to starting a business of DPS app if Apple Store rejects the App? We are in a long time and can't wait for Apple to approve. We host the application elsewhere. How we host our DPS application on the website of our customers? Thank you.

  Unless I misunderstood the question, you can do what you want to do. Apple does not allow to circumvent their public applications store and host on a Web site. The exception is an enterprise application, which requires a company to both Apple and Adobe account. This type of business application can be distributed only within the company. If that's what you want to do, you can learn more here:

  Digital Publishing Suite help | Creating the observer for private distribution applications

  Distribution of iOS Viewer with Digital Publishing Suite business applications | Adobe Developer Connection

  Another option is to add the development application to multiple devices and use them for your demo.

• I would like to store PDF and jpeg files that I have on my iMac on my iPhone.  How can I transfer them?

  I have a lot of jpg and pdf files on my iMac I want to transfer my iPhone so that I can

  access it when iCloud is not available.  I've tried several programs of 'file manager' of

  the application stores, but is unable to transfer.  What is the solution?

  iOS doesn't have a file system.

  You use a PC or a Mac with iTunes on it?

  For images, there are several ways to get these to your iDevice.

  On a Mac with iTunes and pictures/iPhoto app, the jpeg images should be placed in the library of Photos/iPhotos and with your iDevice connected to sync from the computer to iTunes, under the section Photos to iTunes, you would need to check and synchronize these images to be moved/copied to your iDevice.

  These images appear in the Photos of iOS app.

  It is in no way, I think, to do the same thing with iTunes on the PC that the PC has no app like Photos or iPhoto.

  Another way to copy images on the iPad is to search the apps that transfer of the images via WiFi or Bluetooth, install the application on your iDevice and possibly a companion app for your computer (or the image transfer application is accessible by WIFi or Bluetooth via web browser of your computer) If you can transfer images from anywhere on your computer to your iDevice by transferring wireless in both directions between your computer and your iDevice.

  Images that are transferred to your iDevice light directly to the Photos of iOS on your iDevice app.

  I use an image transfer software called picture transfer application to do this. There are others who make a similar function in the iOS App Store.

  If you want to better organize your images other than that Photos of default iOS application no, there are, in addition, image organization in the iOS App Store apps.

  I use one that organizes images into folders.

  He called HD Photo sorting. It makes the image files duplicated Photos iOS app that you can organize them into folders/subfolders as you want.

  For the two PDF documents AND images, you can configure a DropBox account on your computer, download the application on your computer and your iDevice and store/transfer of PDF files and images in DropBox and then copy them to your iDevice. Photos/images wiil, probably get moved/copied/stored/place in the default Photo iOS app.

  A PDF file can get moved/copied/stored/place in the Apple iBooks app or one of the countless readers/editors of PDF found in the iOS App Store.

  Good luck!

• connected to internet but app store don't think so just upgraded to 8.1

  Try to update an app but the AppStore do not think that I am connected to the internet when I am, everything, Google Mail, search etc. working fine, just improved 8 to 8.1 is relevant thar?

  Bertieandrose,

  Welcome to the HP Forum.

  The upgrade to Windows 8.1 could have mistaken your app Store of Windows.

  Try / review

  • Create a Restore Point: create a restore - Win7 Point OR create a restore point Win8
  • Ensure that all of your Windows updates for Windows 8.1 news have been installed.  This is a must-do.  Even if you're usually afraid of the presence of updates of Windows running on your computer, this isn't the time to be shy - after an upgrade to the version of the operating system, you run the updates.

  NOTES:

  1. If you do not like to be surprised, set Windows Updates to Notify instead of auto.  In this way, that you can click on the updates of Windows when you are ready to check / install updates, see the list of updates advance, create your own "pre update" Restore Point, and then install the updates when you are ready to do.
  2. Do not install any optional updates, unless you know what you're doing and you really need.  Most people do not require or need optional updates on their computer.
  • Reset your Windows Application Store:

  Windows key (Opens the start screen) > anywhere type wsreset >

  Right click on wsreset > select run as administrator

  Reboot / restart the computer and log in, if you like

  ------------------------------------------------------------------------------------------------------------

  Example:

  

  Click on the Thumbs-Up Kudos to testify and say thank you.

  While I strive to reflect best practices of HP, I do not work for HP.

• Create a playlist on the PC to use in the Walkman application

  I have so much music, adding one by one to a playlist is an absolute no go.

  I want to just do on the pc and send it directly to the phone without having to disturb the 3rd party applications.

  I can not even find where the application stores the playlists I started to do in the application.

  I think MediaGo is your answer.

• Problems withdraw the application for RuntimeStore

  I have an application that listens to gps, e-mail and sms events. Because I need this application to run at startup of the bb, I used the method mentioned in many articles in kb by placing my application in the Bank to run at startup so that when my gui starts the user interface checks the runtime of the application store and proceeds accordingly. It all works perfectly. My problem comes when I need to stop the background of the GUI thread. I call shutdown in which the application stops all threads, that it is running and then I call a system.exit (0). All threads stop perfectly and closes my gui. However when I return to run the GUI with to restart the phone the waitForSingleton recover again the same background as application before having no threads running in it, and so nothing happens in the GUI (map changes). I also tried to remove the substantive application of the RuntimeStrore through .abolish. When I do cela background threads perfectly but the user interface may not start because an Exception is thrown stating that

  application running in this process... However, this is not when I call the store of runtime. Any ideas as to what I'm doing wrong?

  Thanks in advance

  if(args.length>0 && args[0].equals("gui"))
          {
  
              System.out.println("Starting GUI");
              Controller controller=waitForSingleton();
              try{
              WhereAreYouMain app=new WhereAreYouMain(controller);
              app.enterEventDispatcher();
              }
              catch(Exception e)
              {
                  System.out.println("************EXCEPTION: "+e.getMessage());
                  return;
              }
          }
          else
          {
  
                  boolean AutoStart=true;
                  if(ApplicationManager.getApplicationManager().inStartup() && AutoStart)
                  {
                      System.out.println("********************STARTING WHEREAREYOU*************************");
                  Controller app=waitForSingleton();
                  System.out.println("****************************Started WhereAreYOU**********************");
                  }
              }
          }
  
      public static Controller waitForSingleton()
      {
          RuntimeStore store=null;
          store=RuntimeStore.getRuntimeStore();
          Controller controller=null;
          controller=(Controller)store.get(AppId);
          if(controller==null)
          {
              try{
  
              store.put(AppId, new Controller());
  
              }
              catch(Exception e)
              {
                  System.out.println("Error putting app in storage"+e.getMessage());
              }
          }
          return (Controller)store.get(AppId);
      }
      public static void removeFromRuntimeStore()
      {
          RuntimeStore store=RuntimeStore.getRuntimeStore();
          store.remove(AppId);
  
      }
      public WhereAreYouMain(Controller controller)
      {
          WhereAreYouMainScreen screen=new WhereAreYouMainScreen(controller);
          controller.setMainScreen(screen);
          pushScreen(screen);
      }
  

  When stop you your application, you also have to remove all listeners?  If one of them has a reference, your application will be not eligible for garbage collection and it will remain.

  I understand that this approach (to put the application in RuntimeStore) is actually used in some articles in the KB, but I wouldn't recommend it.

  Instead, I would say put you a small 'data only' RuntimeStore object, call this myRuntimeStore object.  I - this so that you can set a reference to your UiApplication in this document, for example. Have a myRuntimeStore.setMyApp (.) method.  Now your audience can get your app if they want, using myRuntimeStore.getMyApp ().  More importantly, you can erase it and make sure that your application will.  You may encode your listeners to do nothing if your application is not present.

  However, I would like to recommend more than you do not actually store references to your application.  If you need something to initiate treatment in your application process, use a global event.  This beautifully isolates your application of your listeners.

• Get the name of the caller from an application when the Crier - executing.

  Hi all

  Here, I'll be back with a new problem which goes as follows:

  Suppose that my xyz application stores some contacts (just like in the book addresses/phone book).

  Other contacts are by default stored in my Blackberry address book.

  Suppose I get a call on the handset with my app xyz running in background. All I need is to retrieve the name of the caller of the xyz application and view this name as"Akash Calling... ' instead of '+ 919999999788 calling... ". "assuming that the caller details are present in the said application, his name and none of the details in the actual address book. Is it feasible. If so, please suggest.

  Thanks in advance!

  everything in that this is done incoming call:

  1. you retrieve the number of the caller in the earpiece of the phone

  2. you get the name that corresponds to this number in the background application

  3. you create an entry in address book with this name and number

  After callIncoming is executed, the system call screen is displayed. The phone app checks if it can find the number in the address book. It finds the number and displays the name.

  After that the call is accepted or rejected remove you the address book entry.

• Store Windows unable to download 'we cannot connect to the service you need right now. " Check your network connection or try this later.

  Whenever I try to download an app of any kind on the Windows (games, news or social applications) store I get an error message saying it is unable to download or try again later, this happened last week, & it worries me because I am not allowed to download applications. He said: "we cannot connect to the service you need right now. "Check your network connection or try this later. If anyone can solve this problem for me, it would be a great relief.

  Original title: Windows Store-downloads

  Try the troubleshooting steps below after completing the methods provided by Vinodh.V

  Method 1: Make sure that the Date and the time is accurate

  Open quick run (Windows key + R)
  Type timedate.cpl , and then click OK
  Click the Internet time tab

  Click change settings

  Click update now , and then click OK once the time is Sync

  Method 2: The problem may be caused by the Proxy settings

  If you use a Proxy

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Of that type the below command and press enter

  netsh winhttp import proxy source = ie

  If this does not work, you can reset the proxy settings using below command

  netsh winhttp reset proxy

  3:Fix Windows Update method

  Running Windows Update troubleshooting tool can solve some problems.

  Open Control Panel

  Click on find and fix problems under system and security in category view (or) click on Troubleshooting if you have large icons or small icons view

  Select the fixed problems with Windows update.

  Select Next and then click Finish when the process is complete

  Method 4: Search for the latest Windows updates

  Open quick run (Windows key + R)
  Type wuapp , and then click OK
  Click check updates
  Download and install all pending updates.
  Restart the computer

  Method 4: perform the Scan SFC

  Press the Windows key + X to open the Menu power user
  Click prompt (admin)
  Type in the command, and then press on enter

  SFC/scannow

  Method 5: Upgrade to the Local account and switch it to the Microsoft account

  To switch to local accounts

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click on your account
  Click Disconnect
  Enter the current user password and click Next
  Click sign out and finishing
  Log on to the user account

  To switch to the Microsoft account

  Press the Windows key + C to open the bar of charms
  Click settings
  Click change PC settings
  Click USERS or accounts
  Click to connect to a Microsoft account
  Enter the current password
  Enter the password of the Microsoft account and click Next
  Click switch