Apply for a position in the character style

Similar Questions

• Table of contents, problems in applying the character style

  Hi all

  This is my first post, I checked if there was already something similar, but I can't find anything so I'm asking here.

  I work with Indesign 9.3 and I created a book of 80 pages and there are 20 + chapters.

  I wanted to create a table of contents, so I made an and I put my paragraph for her style, but I had problems to set the character style (he set only to the number of the page, but not to the number and the name of the chapter).

  When I create my summary style I have no problem to indicate the paragraph style that you want to use (and then it automatically applies it properly when I generate my list).

  The problem I want to solve, is that I need that my table of contents automatically the value of the character style, cause, for the moment, I have to apply it after its generation.

  Sorry for my bad English, I hope you understood

  Concerning

  Filippo

  In this case you must use the character for numers style nested within the paragraph style

  I'm usually two independent sparagraph styles (primary materials) chapters and sections (toc details). In this way, you can add a different same nested character style to stand them.

  Addibn later - style, it is not good idea. After the update of the table of contents, you have lost the

  macpawel

• Apply the character style to the part of the paragraph

  I am inserting text in a block of text with the following code:

  story.insertionPoints [-1] .silence += pgfStr;

  story.insertionPoints [-1] .silence += "\t";

  story.insertionPoints [-1] .silence += refStr;

  story.insertionPoints [-1] .silence += "\r";

  I want to apply the character style to all of the text in refStr (only the part of this paragraph). I know how the syling paragraph applies to the entire paragraph, but not a character style. I should be grateful if you would help. Thank you!

  Hello

  Dan - BTP says:

  ... the size in points and attack can be different on each page...

  You are able to find a rule of these differences?

  ...

  What do depends on what type of rule could be defined

  ...

  The size of reference point that is 1.5 PT lower than the point size of the paragraph, whatever.

  Close to the end of the script, you can code for example:

       //     Your target is "reference" which is a text inbetween tabulator and end of story (or other criteria).
       //     So you could define:
  app.findGrepPreferences = null;      // just for clear it
  app.findGrepPreferences.findWhat = "(?<=\\t).+\\s\\Z";     //     to catch text following tab in last para of story
       //     and after:
  mFound = app.activeDocument.findGrep();
       //     so all desired text objects are in an array "mFound".
       //     you could iterate (backward) through it:
  len = mFound.length;
  while (len-->0)      //     ">0" in case of nothing found
       mFound[len].pointSize -= 1.5;
  
       //     whatever that is - is 1.5 smaller
  

  Jarek

• Selection of parts and columns, or entire lines and apply the character style

  I am trying to apply character styles to certain parts/whole rows and columns.

  I can change individual cells with the following code...

  table = app.selection[0];
  if (table.hasOwnProperty("baseline")) table = table.parent;
  if (table instanceof Cell) table = table.parent;
  if (table instanceof Column) table = table.parent;
  if (table instanceof Row) table = table.parent;
  if (table instanceof Table)
  
  {
   table.rows[0].cells[6].texts[0].appliedCharacterStyle = "none report";
   }
  

  ... but when I try to select an entire line, I get the error 'Object does not support property or method' texts. "" "When I try one of the following two codes.

  {
   table.rows[0].cells.texts.appliedCharacterStyle = "none report";
   }
  

  {
   table.rows[0].cells.appliedCharacterStyle = "none report";
   }
  

  Anyone know how I can do the following?

  1. Select any row (or column) and apply the character style

  2. Select the last line (regardless of the number of rows in the table) and apply the character style

  3. apply the character style to specific columns (with theexception of the cells of two albums)

  Thank you!

  Hello

  Change this line:

  table.columns[a].cells.itemByRange(2,-1).texts.everyItem().appliedCharacterStyle = "chart orange";
  

  for the first 2 rows in each column

  Jarek

• Apply the character Style to a few characters in a paragraph

  Hey,.

  Me again - I feel like I'm dumber than a shoe trying to script InDesign

  I have a block of text with several paragraphs, which I am adding one by one.

  When adding these paragraphs, sometimes I need to apply a character style to some of the characters in the paragraph (I have the clues start and end of these characters to the text of the paragraph).

  Using the Guide of the script and the object reference, I cooked up this code below, but not only it doesn't seem to find the character style, she also told me the. itemByRange() is not a function...

  What's wrong?

  var line_styles = [{
      'start': 22,
      'end': 33,
      'style': 'Price - SKU'
  }];
  
  frame.contents += "\r" + line_text;
  frame.parentStory.paragraphs[-1].applyParagraphStyle(style);
  
  for ( var j = 0, k = line_styles.length; j < k; j++ ) {
      var char_style = doc.characterStyles.item(line_styles[j].style);
      frame.parentStory.paragraphs[-1].itemByRange(
          line_styles[j].start,
          line_styles[j].end
      ).applyCharacterStyle(char_style, true);
  }
  

  frame.parentStory.paragraphs[-1].itemByRange(...

  does not compute. "paragraphs [-1]" points to a single paragraph and is not an itemByRange method. You must think of sth like

  frame.parentStory.paragraphs[-1].characters.itemByRange(...

  (Have you used another programming language Javascript front?) A matter of concern for the future: pay attention to your statements 'var '. They do not follow the block scope, as they do in other languages, and therefore persisted in this notation is very likely to bite you back somewhere in the future. Summer, done this, released as well the hair).

• How to write the script to apply the character style?

  Hello

  I'm on a Macbook pro and without a numeric keypad, so I can't assign a shortcut to character styles. I heard a roundabout solution where you can assign a shortcut to a script that applies the character styles. Can anyone write this script?

  My character style is called "features"bold. "

  I am new to scripting, sorry if this is a stupid question.

  See you soon

  Hello

  1. save this code as a file inside your Script Panel folder .jsx

  2. apply a shortcut using the menu Edit: shortcuts...

  Option to choose:

  • suggest you choose an option 'background': 'Text', so you can use several shortcuts that are occupied in other contexts.

  #target indesign
  if (app.selection && app.selection[0].hasOwnProperty ("baselineShift") ) {
    var cName = "Features bold";
    var mCstyle = app.activeDocument.characterStyles.item(cName);
    if (mCstyle.isValid)
         app.selection[0].applyCharacterStyle(mCstyle);
    else
         alert ("CharStyle: " + cName + " not found");
    }
  else
    alert ("Some text supposed to be selected...");
  

  Jarek

• My paragraph styles have disappeared and are now appearing as the character styles

  Working on a new site because my old site muse become buggy...

  and now, my paragraph styles have disappeared and are now appearing as the character styles

  

  Thank you for sending the files. One of the files does not contain any character or paragraph Styles. In the other, I see the character styles named as paragraph styles. All indications from within the file are that they were created as character styles. The file format includes indications of the type of the style as well on everything that they are applied and in the list displayed in the palette. All of these styles are indicated by styles of characters in both places. The attributes that are in the styles are limited to what is allowed in a character style.

  In some places where the styles are applied, they are applied to the blocks of text or widget and replacements parts for paragraph-level attributes (i.e. h1 tag, space before and after, etc.). This leads me to suspect that they have can be created from blocks of text pointer tool selections (or other elements of text in widgets) and it was perhaps accidental that they have created using character Styles where paragraph Styles Panel rather than the Panel?

• Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Absent voice memo to the homescreen on IPhone SE there is no 'utility' or 'extras' anywhere; folder Siri is voice memo, but can not get to the home screen? How to apply for voice memo on the homescreen?

  Try going into settings > general > reset > reset home screen presentation.

• How can I set small caps in the character style

  I use the opportunity that you people are online:

  I'm trying to define small caps in the character style and it does not work,

  It works in the paragraph style, why is this? and is it possible around it?

  

  I can see the option in the character Styles: isn't it of menu drop-down available in your dialog box?

  

• Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  Is it possible to create a tag that lists the individual labels [keywords] for each position? The current {tag_blogtaglist} creates an endless list of tags.

  If you can get hands on with the ID of blog post that you can list the tags assigned to this post particularly blog using module_data. It would be only possible with the new BC. Active following rendering engine. Here are some resources to point you in the right direction: how to activate the BC. Next - http://docs.businesscatalyst.com/developers/liquid/introduction-to-liquid#enable how to use module_data - odule_data http://docs.businesscatalyst.com/developers/liquid/consuming-apis-in-the-front-end-using-m install app BC API discovered to get you started on the syntax - http://docs.businesscatalyst.com/developers/apps/bc-api-discovery module data that lists the tags assigned to a blog post looks like this: {module_data = 'blogposts' version = "v3" field resource = subresource 'tag' = "tags" resourceId = collection "303870" = "myData"} resourceId is the blog ID to render tags for. Hope this helps, Mihai

• [JS] [CS3] Apply the character Style to the first word

  I'm a noob that Javascript is concerned, and I expected a little guidance.

  Here is my scenario: I have a book that was composed in a single file; the main content is in a story. I want to select the first word in each block of text on each page and apply a character style. My goal is to use this character style to indicate the page breaks in the XML document - I maps to a specific tag style.

  So far, I have this poor specimen:

  myDocument var = app.activeDocument;
  myPage var = myDocument.pages.item (1);
  var myTextFrame = myPage.textFrames.item (0);

  
  If (app.activeDocument.stories [0] .paragraphs [0] .words [0]! = null)
  myTextFrame.paragraphs.item (0).words.item (0) = .appliedCharacterStyle
  myDocument.characterStyles.item ('foo');

  I know, I did not implement any kind of loop again (which will be more complicated given that there will be some blank backs, etc.). What I try to do in this is to select the first word in the first paragraph on the second page - which it does in reality. It's the first paragraph of the second begins on the first page, so I select that word on the first page, second page.

  As I said, a lot of work to do but a bit of help on getting to the right word would be most appreciated.

  Well, you were on the right track, but the "myText" test fails if there is no block of text on a page, because it fails a line earlier

  > var myTextFrame = myPage.textFrames.item (0);

  just before that, you must test the number of blocks of text:

  If (myPage.textFrames.length > 0)

  {

  ... your stuff...

  }

  Use it only if you are absolutely positive that there is just a block of text on each page! A slightly better way would be to always loop on each textframe:

  for (frames = 0; frames

  {

  var myTextFrame = myPage.textFrames.item (frames);

  .. etc.
  }

  in this case you don't have test his first length (the loop will not be executed if there is zero text blocks).

  [Grumpy] Since you have only a continuous story, an even better way would be to loop on texts related to this single story executives. You must identify the story somehow, and I usually click on the text cursor in the one that I need:

  monarticle = app.selection [0] .parentStory;

  or you can rely on the fact that the story begins as part of text on page 1:

  monarticle = app.activeDocument.pages [0] .stories [0];

  (I think this should work.) Then, each frame of the story until the end can be found in the table

  myStory.textContainers

  which are usually text blocks. Make a loop on them to help

  for (image = 0; frame)

  {

  myTextFrame = myStory.textContainers [frame];

  .. etc.

  }

• How can I leave second column applied to the character style "ITALIC".

  Hello world

  Can you do a script for applied second text column applied to character style ITALIC

  Like this:

  

  Thank you

  John

  Select the table and run the script below:

  App.Selection [0]. Columns [1]. Select();

  App.Selection [0].texts.everyItem () .appliedCharacterStyle = "ITALIC".

  Vandy

• Is it possible to add text to the cells and apply the character style in the cell

  I work in InDesign on Mac 5.

  I have two tables of formatting with information that will be eventually combined. I implemented the scripts I found on these forums to add the columns needed, merge lines and fill the cells merged with the appropriate color, but can't two remaining tasks.

  1. is it possible to add text to a cell of some?

  2 and it is possible to apply a character style to cells? (different cells than those that I need to add some text)

  I played with this code but do not know if it is even close...

  {

  table. Rows [0]. Cells [0]. InsertText (' CS/PS");

  }

  {

  table. Rows [0]. Cells [0] .appliedCharacterStyle ("bold");

  }

  Here are the scripts that I have combined so far for the table...

  Add column

  myTable = app.selection [0];

  MyColumn = myTable.columns [1];

  for (a = 0; < 1; a ++)

  {

  myTable.columns.add (LocationOptions.AFTER, myColumn);

  }

  Merge lines

  table = app.selection [0];

  If (table.hasOwnProperty ("baseline") table) = table.parent;

  If (instanceof cell table) table = table.parent;

  If (instanceof column table) table = table.parent;

  If (instanceof row table) table = table.parent;

  If (instanceof Table table)

  {

  table. Rows [0]. Cells [0]. Merge (table.rows [0] .cells [1]);

  }

  {

  colours alternating in merged lines

  r = table.rows [1];

  n = app.activeDocument.swatches.item ("orange");

  b = app.activeDocument.swatches.item ("PANTONE 3005 C");

  for (c = 0; c < r.cells.length; c ++)

  {

  If (c & 1)

  r.Cells [c]. Properties = {fillColor:b};

  on the other

  r.Cells [c]. FillColor = n;

  }

  }

  Hello

  1. If you want to add the text, go further in:

  table. Rows [0]. Cells [0] .insertionPoints [0] .silence = ' CS/PS;

  2 similar with application of styles:

  table. Rows [0]. Cells [0] .texts [0] .appliedCharacterStyle = "bold" / / If this style is present in your doc

  Jarek

• How to apply the character style to table cell

  I'm sure it's basic, but I can't find any references on how to do it and my attempts have failed.  I use VB and CS5.5

  Basically what I'm trying to do is to select a table cell and apply a character like this style...

  MyCharacterStyle = myDocument.CharacterStyles.Add set

  myCharacterStyle.Name = "TH2".

  myTable2.Cells.Item (1) .appliedCharacterStyle = "TH2".

  with this code, I get a "object does not support this property or method.  myTable2.Cells.Item (...). appliedCharacterStyle ".

  I tried several other versions without success.

  Can someone tell me what would be the proper syntax to apply a character style to text in a table cell, or if it's still the right path to follow on that?

  I have to select the text in the cell rather than the cell itself, and if so, how do you do that?

  Thank you

  You do not need to select the text in the cell, but you need

  to target rather than the cell. It is true that in the user interface, you can

  Select the cell and apply a style of tank, but not with a script. Thus, in

  JavaScript is:

  myCell.texts.item (0) = .appliedCharacterStyle

  app.activeDocument.characterStyles.itemByName ("MyCharStyleName")

  It must be something similar in VB also.

  Of course, you can target the text in different ways:

  myCell.characters.everyItem () or myCell.paragraphs.everyItem () etc etc.

  but I think that the text is the most basic of the lot.

  Ariel

• CS5: Hyperlink to anchor text in the character style?

  Is it possible to script the following:

  A text has several occurrences of the same string, for example "A10". One is marked with a character style "Anchor" and others are marked by a character style "link." The idea is to create anchors text style "Anchor" then find all occurrences of the character 'Link' style and create a hyperlink to the corresponding anchor.

  I managed to find a script that creates a character style "Anchor" text anchors Can anyone offer suggestions on how to make script creating the links?

  Written by Kasyan Servetsky

  March 13, 2011

  // http://www.Kasyan.HO.com.UA

  / / e-mail: [email protected]

  //======================================================================================== =================================

  If (app.documents.length == 0) ErrorExit ("Please open a document and try again.");

  const gScriptName = "create anchor text."

  const gScriptVersion = "1.0";

  gDoc var = app.activeDocument;

  If (! gDoc.characterStyles.item("Anchor").isValid) ErrorExit ("Character style \"Anchor\"n'existe No.");

  CreateDestinations();

  //======================================================== FUNCTIONS  =====================================================

  function CreateDestinations() {}

  app.findGrepPreferences = app.changeGrepPreferences = NothingEnum.nothing;

  app.findGrepPreferences.findWhat = '. '. + » ;

  app.findGrepPreferences.appliedCharacterStyle = gDoc.characterStyles.item ("Anchor");

  var found = gDoc.findGrep ();

  var destCounter = 0;

  for (var j = finds.length - 1; j > = 0; j-) {}

  var found = found [j];

  try {}

  If (! gDoc.hyperlinkTextDestinations.itemByName (found.contents) .isValid) {}

  var hypTextDest = gDoc.hyperlinkTextDestinations.add (found);

  hypTextDest.name = found.contents;

  destCounter ++;

  }

  }

  {catch (e)}

  }

  If (destCounter == 0) {}

  Alert ("no anchor text were created.", gScriptName + "-" + gScriptVersion);

  }

  Else if (destCounter == 1) {}

  Alert ("a text anchor is created.", gScriptName + "-" + gScriptVersion);

  }

  ElseIf (destCounter > 1) {}

  Alert (destCounter "text anchors have been created.", gScriptName + "-" + gScriptVersion);

  }

  }

  //---------------------------------------------------------------------------------------- ----------------------------------------------------------------

  function ErrorExit (error, icon) {}

  warning (error, gScriptName + "-" + gScriptVersion, icon);

  Exit();

  }

  //---------------------------------------------------------------------------------------- ----------------------------------------------------------------

  Hello

  The path is:

  create a hyperlinkTextDestination;

  create a hyperlinkTextSources;

  Create hyperlinks using a single destination and sources;

  so:

  // to create hyperlinks alike:    one destination==>many sources
  // destination is the 1st occurrence of text with charStyle "anchor" applied
  // sources are each occurrences of text with charStyle "link" applied
  
  var mDoc = app.activeDocument;
  
  app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
  app.findTextPreferences.appliedCharacterStyle = mDoc.characterStyles.item("anchor");
  
  var
       mAnchor = mDoc.findText()[0],
       mDest;
  
  if (mAnchor) mDest = mDoc.hyperlinkTextDestinations.add(mAnchor,{name: mAnchor.words[0].contents});
  else {alert ("no anchor found"); exit(); }
  
  app.findTextPreferences.appliedCharacterStyle = mDoc.characterStyles.item("link");
  
  var
       mSource = mDoc.findText(),
       len = mSource.length,
       currSource, currHyper;
  
  if (!len) {alert ("no link found"); exit(); }
  
  while (len-->0) {
       currSource = mDoc.hyperlinkTextSources.add(mSource[len],{name: "sourceLink_" + len});
       currHyper = mDoc.hyperlinks.add(currSource, mDest, {name: "mHyperlink_" + mDest.name + "_" + len});
       }
  
  app.findTextPreferences = app.changeTextPreferences = NothingEnum.nothing;
  

  Jarek