Apply the tag html for the built-in fonts

Similar Questions

• What does 'fon0' or 'fon1' for the built-in fonts?

  I work with a supplier who is reporting to our society. We asked the provider to use our fonts and design standards. The reports are delivered to us in form of PDF files and are finally delivered to our customers, which of course do not have our fonts so we needed them to be embedded in PDF files.

  I am just checking that they use indeed fonts, we have specified, but see confuse the results in the sample PDF files they provided. I see that the fonts are similar, but not quite the same thing. For example, periods, when magnified rather round and square.

  When I look at the Document properties/Fonts, I don't see font names that I expect. I see two apparent embedded fonts - fon0 and fon1, both shown as TrueType (CID) and Encoding like identity. h.

  Anyone has any idea what fon0 and fon1 represent, and why I don't see a familiar font names?

  This means that there was a substitution (as you know the form of periods), probably because the fonts are not available for any app they used to create the PDF file. There are two ways in Acrobat to see more details on the fonts in a PDF file - one is to open upstream and choose the Browse... all the fonts in documents in the Options menu, the other is to install the plug-ins free FontReporter of PDFLib (Google for it).

• P1102w offline and can't find the html for OS x 10.9 configuration utility

  I installed the 1102 on my network, it was printing fine... it off for a few days. Now when I turn it on, the light blinks blue network, when I try and print it says 'the printer is not connected. If I look in system preferences, the printer shows a green light next to it.

  But I have no idea how to get to the online tool that allowed me to configure network settings and see if they have changed. There is no option on any screen taking me there. When I click on "Options and supplies" there is no button to take me to the HP configuration page, and I don't see any software on my computer to allow me to set it up.

  I just put a WPA password on the network, and I know what the question perhaps, but I still don't see how to get to the place where I set up the printer (was it a URL.. .but where he is hiding?)

  Hi @laurad1 ,

  By your post, I see that you cannot set up the printer again on the 10.9. I can help you today.

  Since you have changed the WPA password on the network, you will need to restore the default settings of the printer and set it up again on the network.

  Make sure that Safari is set as default browser. (sometimes the SAP will not open if it is not set by default)

  Open Safari, at the top, select the Safari menu, select Preferences, general, as a default value.

  Restore the settings of the default printer wireless.

  1. turn off the product.
  2. hold the wireless button and the Cancel button and then turn on the product.
  3 press and hold the buttons until the printer stops making noise, then release the buttons.

  Print a Page of Configuration to ensure that IPv4 and SSID are deleted from the old settings.

  Print a Configuration Page.

  Remove the printer in printers and Scanners. Plug the USB cable from the printer to the Mac, and add the printer again. Make sure that it shows just the name of the printer. LaserJet P1102w. You may need to run the Apple updates.

  Here's a Youtube video of the Laserjet P1102w on Maverick wireless installation.

  LaserJet P1102w.

  You can follow the steps rather than watch the video if you want.

  Then go to the Apple, system preferences, printers and Scanners.

  Highlight the Laserjet on the left side of the window.

  Then click Open Print Queue, click settings, click utility, click open printer utility, then click the button HTML Config.

  The integrated for the printer Web server opens.

  Click on the network tab, select Wireless on the left side.

  Fill in the information for your network. Make sure that the infrastructure is selected. Status: Make sure that you select enabled.

  Apply the settings.

  Then go back to the Apple preferences system, printers, and Scanners and click the + to add the Hello Laserjet Printer. (may take a few minutes to appear)

  Remove the USB printer in the list of printers and Scanners window.

  Disconnect the USB cable and try and print.

  If you need help, let me know.

  Good day!
  Thank you.

• FM 10 crashing when you apply the conditional text tag

  Hello everyone.

  For some reason, the FM crashes when I try to apply a conditional text tag to a table (full table). Funny thing is that I did this same thing for three months now without any problem before today, have even two tables in the same document with different tags that are applied to them and that they work correctly.  But when I try to add it, I have a crash. I restarted my computer and made sure all my drivers are up to date, but now I'm at a loss.  Any help?

  Thank you.

  > I select all rows in the table with the mouse, then...

  What happens if you apply the CC to just the anchor of the flow table has.

  When you're conditionalizing an entire table, just the anchor of marking is generally easier and in your case, may be more stable.

• keyboard shortcut to apply the paragraph tag

  I am experienced with FrameMaker 8, but just to start getting used to FrameMaker 9. A keyboard shortcut that I use constantly in FrameMaker 8 is Ctrl-9, type the first letter of the paragraph tag, and then press ENTER. If there is more than one, starting with the same letter, I keep just hitting this letter until it appears the tag I want. For example if there is a title 1 and a Title2, I type 'h' twice to get Title2. With FrameMaker 9, it seems that I have to type the whole word "Title2" before hitting entry.

  Frustrating when shortcuts favorites are messy. Is it possible to recover my old shortcut? Is there a quick way to apply paragraph tags in FrameMaker 9?

  Jay fresno wrote:

  I am experienced with FrameMaker 8, but just to start getting used to FrameMaker 9. A keyboard shortcut that I use constantly in FrameMaker 8 is Ctrl-9, type the first letter of the paragraph tag, and then press ENTER. If there is more than one, starting with the same letter, I keep just hitting this letter until it appears the tag I want. For example if there is a title 1 and a Title2, I type 'h' twice to get Title2. With FrameMaker 9, it seems that I have to type the whole word "Title2" before hitting entry.

  Frustrating when shortcuts favorites are messy. Is it possible to recover my old shortcut? Is there a quick way to apply paragraph tags in FrameMaker 9?

  Type down arrow after selecting the first of similar format names. For example, Ctrl + H 9 DnArrow moves to Title2, or whatever the second format that begins with "H".

  Consider using format names that have less of the same main characters. For example:

  Title 1 H 1

  2 H Title2

  1N Numbered1

  Numbered N

  1 typo displays 1 H Heading1; DnArrow moves to 1N Numbered1.

  Some people separate the abbreviation of the full name with an underscore instead of a space; i. e., 1H_Heading1, instead of 1 H Heading1.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• How to apply the touch screen for Samsung SyncMaster 204BM

  Original title: Samsung SyncMaster 204BM

  I want to apply the touch screen and the narrative and I want to know if this screen and Iam from the computer using portable

  Thank you

  Nora

  Hello

  I suggest that you contact the manufacturer for information links to the product:

  http://www.Samsung.com/us/support/

  I suggest that you check the manual of the monitor to check if it supports the touch screen feature.

• apply the group policy for the screen saver without copying the screen saver on all computers

  Hello
  I have applied the group policy for server screen saver 2008 but do run
  I copied the file on each computer .scr.
  is there a way to push file of screen directly from the server without copying it to each computer on the network?
  or is there a software that can automatically run the screensaver on the network?

  Hello

  The business support, you can find forums on TechNet, see the following links:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

• How to run the built-in tools for audit & correcting allocation due to reticulate files os errors?

  I ran defrag Paragon & it says "error due to reticulate files file system allocation R - OS built in Proofing Tools & fix this error."  Where can I find the built-in tools to fix this error?

  Hello

  as you use a 3rd party defrag program ask for their support on the problems that arise with it

  http://www.Paragon-Software.com/home/total-defrag/

• Download to improve your LV 2009: button "Apply icon to screw" for the library properties dialog box

  Users submitted an application for the Exchange of ideas of LabVIEW to add a button to the Properties dialog box of the library that would apply the library icon Member screws without having to edit the icons in the library. Rather than wait for the 2010 version of LabVIEW, you can do this now. Download the attached .zip file. Unzip and place the files in this directory:

  • labVIEW 2009\resource\Framework\Providers\VILibrary

  replace the files that already exist.

  Hi AQ

  Thanks for writing/posting this code (and to ThSa for pointing it out to me).

  I did in a package to easily share using VIPM (and I can easily upgrade a new installation of 2009 it too much).

  It can be downloaded through LAVA CR

  See you soon

  -JG

• Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero. »

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  Unable to save changes to the sounds. When registered and then double checked, change moved not. This applies specifically to sound for the navigation to start windows Explorer. I'm putting it to zero.

  ====================================
  After making your change did you left click... Apply / OK?
  John Inzer - MS - MVP - digital media experience

• Photo Gallery-tags used for photos of the Windows remain even if the photos have been removed

  Picture of Windows Gallery__

  Tags used for photos stay in the computer even if the photos have been removed.  The remaining tags in UNROLLING in the space where you can enter a tag are no longer relevant and are just a nuisance.

  Tags used for photos stay in the computer even if the photos have been removed.  The remaining tags in UNROLLING in the space where you can enter a tag are no longer relevant and are just a nuisance.

  =================================
  Rename the database library file will force
  Photo Gallery to create a new file the next time, he is
  launched.

  Anyway... the following article explains how to find
  Pictures.PD4:

  Stops Windows Live Photo Gallery (944221)
  answer or does not start
  http://support.Microsoft.com/kb/944221/en-us

  After Renaming Pictures.pd4 you will need to re-catalogue
  your photos and some tags may be lost. If the name change
  Pictures.PD4 does not solve the problem... you can delete
  the new Pictures.pd4 file and change the name of the
  origin to Pictures.pd4 and the catalog file should
  be restored.

  In later versions of Windows Live Photo Gallery...
  the name of the file is Pictures.pd5.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How to set the text html for a label?

  Hi all

  I'm trying to set the text html for a label programmatically by using the following code

   tourDescriptionLabel->setText(""+tourDiscHtmlString+"");
  

  but unfortunately my display of the label

  Some text’s most known 
  

  I tried with this in webView has achieved the same result. I'm getting response json string. I've hardcoded, the response data such cases it shows how reqular.

  Thank you

  Dembélé George Jacob

  I got it

  Thank you for your support

  QString tourDiscHtmlString                        = tourSummary.value("tour_desc").toString();
      QTextDocument text;
      text.setHtml(tourDiscHtmlString);
      QString plain = text.toPlainText();
     tourDescriptionTextArea->setText(""+plain+"");
  

• For 2 years, I used the built in camera 1.3, suddenly out of dissappeared and when I click it it says is not installed.

  For 2 years, I used the built in camera 1.3, somehow suddenly dissappeared and when I click on says it is not installed, I don't want to go into a repair shop because they charge you too much money. Please help, thanks. my pc is windows 7.

  Original title: built in webcam 1.3

  Hi, Nancy,.

  Control Panel > add a device

  Windows will search for devices connected to your system, but not installed. Click on the name of the webcam which shows in the search box and then click "next".

  Choose whether you want Windows to search for the device driver webcam using Windows Update on the Internet, or if you prefer research of Device Manager to the driver using a disc provided by the manufacturer of your laptop. Most of the drivers are on the system recovery disk included with your laptop, if you choose to add the driver from the disk. Check the box of your choice, then click on "next >" to continue.

  Wait while Windows searches from the driver using Windows Update, if that is your choice. There's an active Internet connection for Windows to do successfully. Allow the computer to install the driver and then restart the system for the webcam to be recognized by the system.

  Otherwise, you can use the system recovery disk or a driver downloaded directly from the manufacturer of your laptop to install the driver without using search Windows Update.

  Open the CD/DVD-ROM drive and insert the disc of recovery system or place the driver downloaded from the manufacturer in a directory of files easily accessible on your PC, or on the desktop, or in your 'My Documents' folder.

  Choose the option 'install the software automatically (recommended)' into the application 'Add a device', then press on "Next >" to start looking for your webcam driver. The Hardware Wizard will search the system recovery disk and automatically installs the driver. Press 'Finish' to close the wizard, and then restart the computer to allow the recognition of the webcam. Choose the option "Install the software manually" in order to access the location of the driver where you saved the driver and install it from there. Use the open file manager and search for the driver. Click on the ' next > ' button to install the driver, and then restart the computer to add webcam functionality. -ehow.com

  Built in webcam not working not not in Windows 7

• No sound in the built-in speaker for laptop

  The built-in speaker stopped working after I did the helmet, then the external USB speakers default devices. Even after the default internal speaker, it does not work. In addition, in Skype, we do not hear the other party if they can hear us. The sound of the call is only issued via the loudspeaker or a headset. It is not a problem with the microphones of the other party. It is not a problem with the volume was low or off. All these basic checks have not helped. could someone please help? BTW, I have a laptop Dell Vostro 1014 with Windows 7.

  Hi MaitreyiKollegal,

  Thanks for posting your question in the Microsoft Community forums.

  Do you get any error messages?

  Method 1:
  We will first perform this troubleshooting and check if it helps.

  Diagnose and solve the problems of Windows audio playback automatically
  http://support.Microsoft.com/mats/AudioPlayback/

  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Check out the link:
  http://www.Dell.com/support/drivers/in/en/inbsd1/product/Vostro-1014

  Hope this information helps you. If you need additional help or information on Windows, I'll be happy to help you.

• apply the patch for acs unit

  I was wondering if someone can help me to update my ACS camera with patch 4.1.1.23.4 - SW. It's simple to apply it in a normal server, 2000. The ACS unit according to me is different because we can access through normal terminal, keyboard and mouse.

  Some I had to read it is necessary a tomcat server?

  Help, please

  ADI

  Hello

  ACS v4.1.1.23 patch 5 is available then go for this new patch.

  You should have a pc that can access the ACS through the web interface. Keep the file of fix on the PC.

  Follow the steps below on the PC:

  [1] extract zipped file

  [2] get? Autorun.exe? file and double-click it

  [3] it will start a server tomcat on your desk and you? 'll see a web page asking ACS

  IP SE:

  Provide the IP ACS SE and the press? Install?

  [4] he will ask for ACS admin username and password as shown below:

  Specify the user name and the password and connect.

  [5] then he raise ACS GUI, then go to

  System configuration > device upgrade status > download,.

  Then we? 'll get a screen where it will ask for the ip address of the server to install:

  Provide the ip address of the system where we apply this patch, in our case our

  ip address of office, and then click on connect.

  [6] he will show us after screen:

  Click on? Download now?

  Then he? show us this screen:

  Press? Refresh? Until we see the following screen:

  [7] now, press on? Apply the update? Then he? He wants confirmation:

  Press? Update?, then we? 'll get information about the patch.

  Click on? Yes?.

  It? LL take a few minutes to apply this hotfix on the device.

  Then he? show us a confirmation message:

  Press? Fact?, then the system will restart.

  To confirm that the patch has been applied successfully, goto

  System configuration > status upgrade unit

  After all right, stop the tomcat server by clicking on? stop server distribution? or

  If you want to apply this hotfix on a device more click on? Install following?

  I hope this helps.

  ~ Rohit