apply the patch for acs unit

Similar Questions

• Apply the patches to ACS 5.1

  Hi all

  I hope someone can help with this problem.

  I have an ACS 5.1 with the next load of S/W

  Deploying applications engine Cisco OS version: 1.2
  ADE-OS Build Version: 1.2.0.146
  ADE-OS System Architecture: i386

  Cisco ACS VERSION INFORMATION
  -----------------------------
  Version: 5.1.0.44
  The identifier for the internal version: B.2347

  I downloaded 5-1-0-44 - 3.tar.gpg, 5-1-0-44 - 4.tar.gpg and 5-1-0-44 - 5.tar.gpg to a local directory on GBA, but every time I try to run the upgrade patch GBA fix install 5-1-0-44 - 5.tar.gpg repository_name repository get following error output...

  chmod: cannot access at the "* .sh ': no such file or directory".
  Patch not valid 5-1-0-44-5.tar.gpg'-missing install.sh
  % Error: failed to open / validate the patch

  I have moved the 5-1-0-44 - 5.tar.gpg to a linux machine and tried to dencrypt the file using gpg d 5-1-0-44 - 5.tar.gpg but it invites then pass phrase, I tried a few guesses, but I couldn't decipher.

  So what part of the upgrade process I am missing, or do I have to install some kind of password so that the ACS can properly decrypt files to fix.

  I tried this with the patch 3, 4 and 5.  I need to start pathch 1?

  Thank you

  Cefyn Arch

  Helloz,

  Form where you downloaded the patch. I suggest you download from cisco.comif you download before.

  http://Tools.Cisco.com/Squish/1D47B

  No, you can directly apply the patch 5.
  Correct the command that you run to apply the patch.
  I wish allows you to check a few things

  1 are you using TFTP? If so, then switch to FTP and try again.
  2. prior to apply the hotfix, make sure that you can see the file in the repository.

  Show repository

  If you can see patch 5 under the repository then you're good to go.

  HTH

  Jousset

  ~ Make useful messages rate

• Apply the patches for EBS R12.2 ORS

  Hi all

  I just finished the basic installation 12.2.0. I want to apply the patch to 12.2.4. Do I need to install the first ORS patches?

  Can you check if this process is correct? Which MOS Doc ID can we find?

  Backup your existing Instance R12.2 upward.

  Connection for the user of the application.

  Copy the patches to $APPL_TOP_NE /... /patch

  CD $ADMIN_SCRIPTS_HOME

  ./adstpall.sh apps/apps

  . < RUN_BASE > / APPS/appl/EBSapps < nom_du_contexte > .env - located the .env APP < nom_du_contexte >

  CD $ADMIN_SCRIPTS_HOME

  ./adadminsrvctl.sh start

  adoption phase = apply patches = < patch_number > /hotpatch = yes

  INSTANTIATION OF OSH

  $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/ssl_conf_FMW.tmp - stat

  $ $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/mod_wl_ohs_conf_FMW.tmp - stat

  $ $ADJVAPRG oracle.apps.ad.autoconfig.InstantiateFile.

  e-$CONTEXT_FILE.------

  $FND_TOP/admin/driver/ohstmpl.drv d.

  $FND_TOP/admin/template/admin_conf_FMW.tmp - stat

  Perl $FND_TOP/patch/115/bin/txkSetAppsConf.pl $.

  -contextfile = $CONTEXT_FILE.

  -outfile=$INST_TOP/logs/appl/RGF/TXK/temp.txt

  CD $ADMIN_SCRIPTS_HOME

  ./adstrtall.sh

  adoption phase = fs_clone

  Thank you all.

  Hello

  MariaKarpa (MK) wrote:

  Hi all

  I just finished the basic installation 12.2.0. I want to apply the patch to 12.2.4. Do I need to install the first ORS patches?

  Can you check if this process is correct? Which MOS Doc ID can we find?

  You need to install the patches according to the document

  Oracle E-Business Suite Release 12.2.4 Readme (Doc ID 1617458.1)

  Oracle E-Business Suite version 12.2: consolidated list of patches and fixes of technology (Doc ID 1594274.1)

  Applying the last pub and the T2K release update pack for Oracle E-Business Suite Release 12.2 (Doc ID 1617461.1)

  Please use your existing wires, do not open a new

  Thank you

• failure to apply the patch for CSA 5.0.3

  Hi guys,.

  I am applying pach 5 to my ACS version 5.3 using FTP but I receive the following errors after the backup show history command is issued.

  Wed Jun 13 14:54:31 CEST 2012: backup test-120613 - 1454.tar.gpg in the repository ACS_BACKUP: error - transfer failed

  Wed Jun 13 15:03:38 CEST 2012: backup test-120613 - 1503.tar.gpg in the repository ACS_BACKUP: error - transfer failed

  When I use TFTP, I get a message saying that the file is too big, which i understand 164 MB.

  After the publication of the repository to see the 'name of the repository", I get the following error.

  % Error reading directory on the remote server.

  the patch is one of my disks hard D, how do I specify the path of files ACS which drive use?

  I can only place a url but without specifying what player. Any help is appreciated.

  TFTP does not work. Try to use FTP only. The error you see indicates that the user has sufficient rights to make changes. On the FTP server, you must create this folder as a HOME directory and give read/write rights.

  After that, run show deposit and it should show you a list of all the available files.

  In case this does not work, try to get the FTP server logs.

  Kind regards

  Jousset

  The rate of useful messages-

• Apply the patches for bugs (in Sites7.6.2)

  Hello

  We have recently upgraded to 7.6.2 Sites. I came across a total of 15 patches (update rollups in the old terms FatWire), I would need to apply. My question is are these update rollups (such as a Patch 15 would fix the bugs fixed in previous patches) or do we have to apply gradually, one at a time?

  I guess that the same question would apply to questions of patches for 11.1.1.8 Sites.

  Thank you

  Hari

  Hello Hari,

  Patches are cumulative (they contain previous patches on this version), unless otherwise stated. This applies to both Sites 7.6.2 and 11g.

  Thank you
  Yu-Chun

• How to apply the patch for Hyperion System 11.1.1.3?

  Hi all
  
  We are on Hyperion System 11.1.13 and we intend to switch to IE8 by the company. I know that there is a possible problem with IE8 with space work and financial information. When I did the research, it shows that we must apply the following hotfixes. I've done system Hyperion 11 facilities several times but I never have patches. Difficult to apply patches and correct possible risks if we do not? can someone please post how to apply patches?
  
  EMP Workspace (with patch 9314073), Financial Reporting (with patch 9657652).
  
  Thank you

  Opatch backup means more likely to make a backup of the phone book file Opatch, regarding installing the patch instructions must be reading me.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Update Windows shows about 100 updates important to apply. How would you recommend I do. I'm afraid to apply the patches to 100 at a time. Those who would be safer to start with? Thank you

  The manufacturer has replaced the HD on my computer laptop 64 bit Windows 7.  Update Windows shows about 100 updates important to apply.  I can't find patches that I had previously applied in the list of applied hotfixes or patches to apply list.  I don't understand why this is.  How would you recommend I do.  I'm afraid to apply the patches to 100 at a time.  Those who would be safer to start with?

  Thank you

  Hello

  I suggest you only begin to install the important updates (recommended) first and later if you want you can install optional updates. All Windows update are safe to install and it is important to install the update and recommended by Microsoft. It keeps your computer safer and your software current to date and if you want Windows to install important updates as they become available, turn on automatic updating. Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.

  For more information, take a look at the following link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/install-Windows-updates

• How to apply the patch to power supply in an environment of dataguard

  I need to apply a patch of power supply in an environment of dataguard. I would like to know the sequence of steps I must follow.

  Can someone please help me on this? DB version is 11.2.0.4 and I need to apply 11.2.0.4.3 PSU.

  In order to apply the fix, you must first carefully read the "Readme" of the patch for instructions.

  To give an overview of the sequence of steps to follow to apply a patch in environment dataguard, here it is:

  1 reporter on the primary to the standby log shipping.

  2 cancel the MRP on the standby database.

  3. apply the patch of power supply on the standby server. -See the Readme for instructions.

  4. ensure that the standby db is mounted and the earpiece is in place on the standby server.

  5. do not run any script correction on the standby database.

  6. apply the patch of power supply on the principal server.

  7. make sure that your primary database and the listener on the primary server is running.

  8 turn on the primary to the standby log shipping.

  9 start the MRP on the standby database.

  10. run the script of correction (catbundle.sql) on the primary database and monitor the progress of the eve of the resumption.

  Please refer to this

  How do you apply a group of patches, the power supply or the CPU in a configuration of data secondary physical custody (Doc ID 278641.1)

  Applying the fix to power supply in a dataguard environment (physical Standby). Shivananda Rao

  HTH

  -Jonathan Rolland

• How to apply the patch in oracle 12 c

  Hello

  Is there a correct way to apply a patch in oracle 12 c.

  Database is up and running (in open mode / read, write)

  No application is connected to the database

  But it seems that his is not successful.

  [oracle@localhost 19504744] $ opatch apply

  Setup Oracle interim Patch version 12.1.0.1.10

  Copyright (c) 2015, Oracle Corporation.  All rights reserved.

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  Check the environment and performing preliminary controls...

  Skip patch 19504744 list of patches to apply: this patch is not required.

  After ignoring the patches with missing components, there are no patches to apply.

  OPatch Session is complete warning.

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  
  

  cat /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     OPatch invoked as follows: «apply - invPtrLoc /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc»

  [December 7, 2015 02:06:59]     Could not make central inventory using NGOUI; oracle.sysman.nextgen.utils.NextGenInventoryUtil

  [December 7, 2015 02:06:59]     YES-67077:

  Oracle home: /home/oracle/app/oracle/product/12.1.0/dbhome_1

  Inventory Center: / home/oracle/app/oraInventory

  from: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oraInst.loc

  OPatch version: 12.1.0.1.10

  YES version: 12.1.0.2.0

  YES location: /home/oracle/app/oracle/product/12.1.0/dbhome_1/oui

  Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:06:59]     History of patch file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/opatch_history.txt

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-1]: after call to installInventory.getAllCompsVect (): 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-2]: before loading cooked a stop: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-3]: after loading before loading minipatch and rawOneOffList list in a cooked off: 23 (MB)

  [December 7, 2015 02:07:01]     [PRRO-MEMORY-4]: after completing cookedOneOffs and when the inventory is loaded...: 23 (MO)

  [December 7, 2015 02:07:01]     Check the environment and performing preliminary controls...

  [December 7, 2015 02:07:01]     Checking for conflicts between the colonies...

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail start-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Adapter can go list: 19504744

  [December 7, 2015 02:07:01]     Not need adapter list:

  [December 7, 2015 02:07:01]     List of self-catering maps:

  [December 7, 2015 02:07:01] checkConflictAmongPatchesWithDetail thin-> Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Intra-conflict control PASSED

  [December 7, 2015 02:07:01]     Checking whether Oracle Home has components required by tasks...

  [December 7, 2015 02:07:01]     Check if the "19504744" patch is a patch of no-op.

  [December 7, 2015 02:07:01]     Opt. comp. not in inventory OH: oracle.rdbms, 12.1.0.2.0

  [December 7, 2015 02:07:01]     [oracle.rdbms, 12.1.0.2.0]

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not required.

  [December 7, 2015 02:07:01]     CheckMissingComp: hash match, re - build SWFs

  [December 7, 2015 02:07:01]     YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [December 7, 2015 02:07:01]     UtilSession: N-apply is.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     The following warnings occurred during execution of OPatch:

  ([7 December 2015 02:07:01] 1) YES-67124:

  After ignoring the patches with missing components, there are no patches to apply.

  [Dec 7, 2015 2:07:01 AM]     --------------------------------------------------------------------------------

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  [December 7, 2015 02:07:01]     Finishing UtilSession in Mon Dec 07 02:07:01 PST 2015

  [December 7, 2015 02:07:01]     Location of the log file: /home/oracle/app/oracle/product/12.1.0/dbhome_1/cfgtoollogs/opatch/19504744_Dec_07_2015_02_06_59/apply2015-12-07_02-06-59AM_1.log

  [December 7, 2015 02:07:01]     YES - 67008:OPatch Session is complete warning.

  1. not a correct way to apply the patch

  2. you must stop your database - instance. Since patch applies it would execute a re-release of links (as the binaries are access it would apply)

  Look in your current patch its not needed

  Skip [7 December 2015 02:07:01] patch 19504744 list of patches to apply: this patch is not necessary. (if you can't find the question)

  
  

  Please refer to the documentation opatch 12 c, atleast see the patch readme.txt (Please spend some time this basic thing every DBA should do - do not jump).

  
  

  Update:

  
  

  Check the environment and performing preliminary controls...

  Jump list of patches to apply 19504744 patch : this patch is not necessary.

  
  Clearly it indicating information
  

  -Pavan Kumar N

• Strange worker has no reasons when applying the patch 17529626

  Dear all,

  I am applying the patch 17529626 on platform EBS R12.1 Linux X 86-64. So I am facing the following problems:

  1:

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: Yes

  I answer 'Yes' to continue such patch recommended in some other discussions of Oracle.

  2: after spending the step that precedes the adpatch blocks in the following lines:

  IMPOSSIBLE: folder ap_holds_all.xdf worker 1.

  IMPOSSIBLE: folder zx_import_tax_lines_gt.xdf worker 2.

  ATTENTION: Fix the worker failed above the Manager to continue.

  
  

  I checked the logs of the worker, and I got the following:

  1:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  INFO: An additional column LAST_UPDATED_BY exist in the target database

  The AP_HOLDS_ALL table is absent from the LAST_UPDATED_BY column

  WARNING: The missing column is NOT NULL and there is no default to apply

  Add a nullable column with the statement

  Executing statement

  ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Start time for the above statement is kills Sep 20 23:42:21 THIS 2015

  End time for the above statement is kills Sep 20 23:42:21 THIS 2015

  Error in the statement ALTER TABLE AP. ADD AP_HOLDS_ALL (LAST_UPDATED_BY NUMBER (15) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 Oct 23:42:21 THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:42:21

  Assignment 2:

  INFO: An additional column ATTRIBUTE7 exist in the target database

  INFO: An additional column ATTRIBUTE8 exist in the target database

  INFO: An additional column ATTRIBUTE9 exist in the target database

  The ZX_IMPORT_TAX_LINES_GT table is missing the column ATTRIBUTE1

  Executing statement

  ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Start time for the above statement is kills Sep 20 23:41:59 THIS 2015

  End time for the above statement is kills Sep 20 23:41:59 THIS 2015

  Error in the ALTER TABLE ZX. ADD ZX_IMPORT_TAX_LINES_GT (ATTRIBUT1 VARCHAR2 (150) NULL)

  Error message is ORA-01430: column being added already exists in the table

  Error code is 1430

  ==========================================================

  Appeals to the utility function. Return code = TimeStamp [1] = [Mar 20 23:41:59 Oct THIS 2015]

  Update task with status 1

  AD worker error:

  The utility FndXdfCmp returned the error for the task above.

  AD worker error:

  The above program has failed.  See the error messages listed

  above, as appropriate, or look at the log files and output of the program.

  When the worker has no time: Tuesday, October 20, 2015 23:41:59

  So I checked the two tables for these columns:

  DESC AP. AP_HOLDS_ALL: LAST_UPDATED_BY NOT NULL Number (15) exists

  DESC ZX. ZX_IMPORT_TAX_LINES_GT: Attribut1 VARCHAR2 (150) exists

  Now, I'm confused and I don't know how to solve this problem, please help?

  In addition, I tried to restart the worker through adctrl, they have been restarted but still runing for a very long time!

  Thank you very much for your help!

  Concerning

  Moussa

  Please check

  Errors in applying the Patch 15966842: R12. AP. B (Doc ID 1535742.1)

  Patch is different but the error is the same

  concerning

  Pravin

• lyingWhen application of a fix via ADOPTION, he failed with the AutoPatch error: you must be in Maintenance Mode to apply the patches.

  Everything by applying the patch Patch 18345006 as explained in Doc 1981206.1 , in the phase to apply it, I get the error

  AutoPatch error:

  You must be in Maintenance Mode to apply the patches.

  You can use the AD Administration utility to set the Maintenance Mode.

  I'm on Oracle EBS 12.2.4, Windows 2008 R2 x 64, 2 appl_tops not shared and the error occurs on the primart node.

  How I applied the patch

  source, run fs

  adoption phase = apply patches = 18345006 = no allnodes

  The issue was that my tns ifile was entered incorrectly for _PATCH entered tns. After having corrected the phase to APPLY fine.

  Apparently, the maintenance mode error is just a smoke screen

• Apply the Patch IE11

  Hello

  I use JDev 11.1.2.4.0 in windows 8.1

  I want to run my ADF application locally my JDeveloper and run in IE11. Here are the steps I followed:

  I closed JDeveloper and weblogic Server embedded

  1-DOWNLOAD patch 18277436 as in https://blogs.Oracle.com/jdeveloperpm/entry/oracle_jdeveloper_and_adf_patches

  2 - this patch has 2 patches (18277436/Yes & 18277436 / his). I opened me read file and I found that I have to use 18277436 / her for 11.1.2.4.0.So JDev, I'll use the patch 18277436 / his

  3 - I opened the folder of his and I follow the steps in the readme file.

  4. I downloaded the OPatch p5912518_111000_GENERIC.zip.

  5. in C:\Oracle\Middleware\jdeveloper I extracted the folder OPatch

  6. I open cmd and write ORACLE_HOME = C:\Oracle\Middleware\jdeveloper

  7. I go to the patch path and then apply the patch as C:\18277436\sa\18277436 > C:\Oracle\Middleware\jdeveloper\OPatch\opatch apply - jdk C:\Oracle\Middleware\jdk160_24

  Citing O Patch 11.1 .0.0.1

  Setup Oracle interim Patch version 11.1.0.0.1

  Copyright (c) 2011, Oracle Corporation.  All rights reserved.

  Oracle home: C:\Oracle\Middleware\jdeveloper

  The Oracle Home Inventory: C:\Oracle\Middleware\jdeveloper\sainventory

  OPatch version: 11.1.0.0.1

  Product information: C:\Oracle\Middleware\jdeveloper\product.xml

  Location of the log file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch2015-06-19_12-29 - 03 PM .log

  History of patch file: C:\Oracle\Middleware\jdeveloper\cfgtoollogs\opatch\opatch_hiMobyDick.txt

  Fix provisional application '18277436' ApplySession to OH ' C:\Oracle\Middleware\jdeveloper'

  Prior running check...

  Please stop Oracle instances miss this ORACLE_HOME on local system.

  (Oracle Home = "C:\Oracle\Middleware\jdeveloper")

  The local system is ready for the patcher? [y | n]

  There

  The user responded with: Y

  Backup of files and inventory (no self-catering) for the Oracle home

  Backup of files affected by the patch "18277436" for the restoration. It may take a while...

  Backup of files affected by the patch "18277436" for the restoration. It may take some time...

  Patching component oracle.jdeveloper, 11.1.2.4.0...

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-api - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-automation - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf-richclient-impl - 11.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\adf.oracle.domain.webapp.war"

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\dvt - faces.jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - api .jar '

  Copy of the file to "C:\Oracle\Middleware\jdeveloper\modules\oracle.adf.view_11.1.1\trinidad - impl.jar '

  ApplySession adding temporary patch '18277436' to the inventory

  Checking for update...

  OK stock check: Patch ID 18277436 is part of the spirit of the inventory of Oracle Homemetadata good h.

  Files check OK: Patch ID 18277436 files are present at Oracle.

  The local system has been fixed, and it can be restarted.

  OPatch succeeded.

  If Opatch is successful.

  8 clear the tmp folder in [MW_HOME] / user_projects/domains / [domain_name] [SERVER NAME] /servers/ /tmp/

  9. I start my JDeveloper using C:\ > C:\Oracle\Middleware\jdeveloper\jdeveloper.exe -own

  10. I run my ADF JDeveloper application the IE11 open to access the application I got "browser not supported message.

  Why I got 'browser unsupported message' y at - it something missing?

  Is there an apply patch 18277436 in JDev 11.1.2.4.0 and run the application in IE11?

  Thank you.

  Try to follow the same steps that you did but set ORACLE_HOME = C:\Oracle\Middleware\oracle_common and extract oracle_common folder instead of the folder jdeveloper OPatch.

  If you get errors while applying the patch in oracle_common try to remove the middleware House and re-JDeveloper Setup again.

• An error occurred during rebinding of application program after applying the patch patch p9239090

  Dear experts,

  I put my installation Oracle of R12.1.1 to R12.1.3 level.

  I made a request patch 9239089 successfully, but system showed me an error after the application of patch p9239090 . (An error occurred during re-Association of the application programs. ) )

  The log file is

  Start of session AutoPatch *.

  AutoPatch version: 12.0.0

  AutoPatch started: Tuesday, June 17, 2014 06:34:34

  APPL_TOP is defined on/u01/applr12/apps/apps_st/appl

  The value of NLS_LANG environment is: American_America.US7ASCII

  NLS_LANG value for utility AD run is: AMERICAN_AMERICA. US7ASCII

  Backup restart files, as appropriate. Fact.

  Your previous session to autopatch did not stand up to the end.

  You want to continue your previous session to AutoPatch [Yes]? There

  You are about to apply a patch for the installation of the Oracle Applications

  in your ORACLE database "PROD".

  using ORACLE executable files in ' / u01/applr12/apps/tech_st/10.1.2'.

  This is the database correct [Yes]? Yes

  Connecting to the SYSTEM... Successfully connected.

  Already asked the ORACLE username and password

  Application Object Library.

  (The name of user and password given was: APPLSYS / *)

  Connecting to APPLSYS... Successfully connected.

  The status of the different features in this performance of the AutoPatch is:

  <-feature version in - >

  Function Active?   Flags of APPLTOP data model

  ------------------------------   -------   --------   -----------   -----------

  CHECKFILE Yes 1 1 O N N O N O

  PREREQ Yes 6 6 O N N O N O

  CONCURRENT_SESSIONS NO. 2 2 Y O N Y O N

  PATCH_TIMING Yes 2 2 O N N O N O

  PATCH_HIST_IN_DB Yes 6 6 O N N O N O

  SCHEMA_SWAP Yes 1 1 O N N Y Y Y

  JAVA_WORKER Yes 1 1 O N N O N O

  CODELEVEL Yes 1 1 O N N O N O

  Product file information...

  Reading language information and territory of file...

  The language information of applUS.txt reading...

  AutoPatch WARNING:

  Product data file

  /U01/applr12/apps/apps_st/appl/Admin/zfaprod.txt

  There is no product "zfa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/applr12/apps/apps_st/appl/Admin/zsaprod.txt

  There is no product "zsa".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  AutoPatch WARNING:

  Product data file

  /U01/applr12/apps/apps_st/appl/Admin/jtsprod.txt

  There is no product "jts".

  This product is registered in the database, but the

  above the file does not exist in APPL_TOP.  The product

  will be ignored without error.

  Currently, the following is installed:

  Status of language code

  ----   --------------------------------------- ---------

  American base of American English

  Your base will be AMERICAN.

  Set up the module information.

  Reading database for more information on the modules.

  Saving the module information.

  Connecting to the SYSTEM... Successfully connected.

  Connecting to APPLSYS... Successfully connected.

  AD code level: [B.3]

  STRT_TASK: [AutoPatch startup after software] [] [Tuesday, June 17, 2014 06:34:49]

  Connecting to applications... Successfully connected.

  STRT_TASK: [password validate schema] [] [Tuesday, June 17, 2014 06:34:49]

  STOP_TASK: [password validate schema] [] [Tuesday, June 17, 2014 06:34:49]

  STRT_TASK: [history of Patch Upload information filesystem] [] [Tuesday, June 17, 2014 06:34:49]

  Try to get a lock...

  About to attempt of instantiation of the snapshot of the current view: Tuesday, June 17, 2014 06:34:50

  Attempt to instantiate the snapshot current view...

  Was already instantiated. If no instantiation made this time.

  Trying to instantiate the snapshot of the current view: Tuesday, June 17, 2014 06:34:50

  S T E R T O F U P L O A D *.

  Start date: Tuesday, June 17, 2014 06:34:50

  0 "left on" files uploaded to DB javaupdates.txt: Tuesday, June 17, 2014 06:34:50

  0 patches downloaded from the history of patch ADPSV format files: Tuesday, June 17, 2014 06:34:50

  Download information on files copied during previous tests...

  Download ' / u01/applr12/apps/apps_st/appl/admin/PROD/out/filescopied_15760.txt '...

  Start instant processing of information

  No records processed = 5012

  Collecting statistics for the table 'AD_CHECK_FILE_TEMP '...

  Fact.

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:34:53

  Fact update of the snapshot for the above lines Tables... End time: 17 June 2014 Mar 06:35:50

  No records processed = 10110

  Update of the snapshot Tables... Start time: June 17, 2014 Mar 06:35:51

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:36:24

  No records processed = 15110

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:36:25

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:36:51

  No records processed = 20130

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:36:52

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:37:16

  No records processed = 25130

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:37:16

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:37:49

  No records processed = 30842

  Collecting statistics for the table 'AD_CHECK_FILE_TEMP '...

  Fact.

  Update of the snapshot Tables... Start time: Mar 17 June 2014 06:37:50

  Fact update of the snapshot for the above lines Tables... End times: Mar 17 June 2014 06:38:01

  Completed the instant processing of information

  1 "left on" filescopied_ < session_id > .txt files uploaded to DB: Tuesday, June 17, 2014 06:34:50

  ****************** E N D   O F   U P L O A D ******************

  End date: Tuesday, June 17, 2014 06:38:01

  STOP_TASK: [history of Patch Upload information filesystem] [] [Tuesday, June 17, 2014 06:38:01]

  Already asked the name of the patch directory.

  (The answer was: / u01/9239090)

  STOP_TASK: [AutoPatch startup after software] [] [Tuesday, June 17, 2014 06:38:01]

  Already asked the name of the driver of the patch file.

  (The answer was: u01/9239090/u9239090.drv)

  STRT_TASK: [execute a driver file single patch] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [steps before the part of copy] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [pilot Initial processing steps] [] [Tuesday, June 17, 2014 06:38:01]

  STOP_TASK: [pilot Initial processing steps] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [get Oracle Applications release and read the driver file] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [driver and logic output for a reboot] [] [Tuesday, June 17, 2014 06:38:01]

  STRT_TASK: [read the release list save file] [] [Tuesday, June 17, 2014 06:38:01]

  Playlist version save file...

  Release list reading registered the file

  STOP_TASK: [read the release list save file] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [driver and logic output for a reboot] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [get Oracle Applications release and read the driver file] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Prereq logic check] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Prereq logic check] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [patch question Ask translated] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [patch question Ask translated] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine bugs apply] [] [Tuesday, June 17, 2014 06:38:03]

  Journal and news file synchronization point:

  Tuesday, June 17, 2014 06:38:03

  Deactivation of the actions that make reference to unrecognized products.

  Journal and news file synchronization point:

  Tuesday, June 17, 2014 06:38:03

  End of unrecognized product verification.

  STOP_TASK: [determine bugs apply] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: process action [Options] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: process action [Options] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: Edit actions for "bootstrap" mode] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: Edit actions for "bootstrap" mode] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Ask for the number of parallel workers] [] [Tuesday, June 17, 2014 06:38:03]

  (The number of parallel workers is: '8')

  STOP_TASK: [Ask for the number of parallel workers] [] [Tuesday, June 17, 2014 06:38:03]

  AutoPatch will run in parallel mode.

  STOP_TASK: [steps before the part of copy] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Not part of copy] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [applied the new applterr.txt] [] [Tuesday, June 17, 2014 06:38:03]

  Didn't need to apply new applterr.txt.

  STOP_TASK: [applied the new applterr.txt] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [AutoSplice applprod.txt and applUS.txt] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Version searching for driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Version searching for driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [copy driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [copy driver files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [driver files Forcecopy] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [driver files Forcecopy] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [screen invalid files for this configuration] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [screen invalid files for this configuration] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [read the file driver files for a list of valid files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [read the file driver files for a list of valid files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [libout Perform actions] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [libout Perform actions] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [To conduct an audit of version] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [To conduct an audit of version] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine the directories to create] [] [Tuesday, June 17, 2014 06:38:03]

  To jump...

  Determine the directories to create for driver specific

  Since no action is present for this driver file

  STOP_TASK: [determine the directories to create] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine executables to bind] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [determine executables to bind] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine the executable files to generate Forms] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [determine the executable files to generate Forms] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [library files determined PL/SQL to generate reports] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [library files determined PL/SQL to generate reports] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [files determine the reports to generate] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [files determine the reports to generate] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [determine to build the files of messages] [] [Tuesday, June 17, 2014 06:38:03]

  To jump...

  Determine if you need to generate messages for driver files specified

  Since no action is present for this driver file

  STOP_TASK: [determine to build the files of messages] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Find bugs with any active] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Find bugs with any active] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: custom view [files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: custom view [files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [copy files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [copy files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Forcecopy files] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Forcecopy files] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Perform actions of libin] [] [Tuesday, June 17, 2014 06:38:03]

  STOP_TASK: [Perform actions of libin] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [create directories] [] [Tuesday, June 17, 2014 06:38:03]

  To jump...

  Create specific directories pilot

  Since no action is present for this driver file

  STOP_TASK: [create directories] [] [Tuesday, June 17, 2014 06:38:03]

  STRT_TASK: [Relink executable] [] [Tuesday, June 17, 2014 06:38:03]

  Reissue of executable links...

  An error occurred during re-Association of the application programs.

  Continue as if it was successful [No.]: No.

  Release includes the hash table

  Release fixes hash table

  Hash table freeing basedons

  Releasing entities hash table

  You must check the file

  / U01/applr12/Apps/apps_st/Appl/admin/prod/log/adpatch_901

  to find errors.

  Kind regards

  Dear X E H E R

  I have faced this message also when installing

  ATTENTION: All workers have failed or are pending:

  Failed: File WFRESGEN worker 1.

  Failed: File WFRESGEN worker 2.

  Failed: File WFRESGEN worker 3.

  ATTENTION: Fix the worker failed above the Manager to continue.

  What it means?

  Kind regards

  Ahmad

• apply the patches of several products

  
  Hi gurus.

  I have an SR open the framework of this call, but its been almost 2 weeks and several calls of "escaclation" and still nothing from them...

  I must apply a number of patches in a range of products. Some of these products are 'shared', as in they need to be patched because they are dependencies on other installed products "full."

  What is the best way to apply these in the shortest amount of time?

  I'd like to just their bundle all in a merger and press the apply... but I'm afraid that this is going to work.

  They I think about it is to run each corrective product group in separately... This will take a long time as I have about 8 different prodcuts to patch for.

  Any ideas?

  Thank you

  DA.

  11.5.10.2

  11.2.03

  ANY 5.5

  Thanks for that - do happen to know if merge fails in the merge process tries to merge a patch that updates the announcement / DNF top? If so, then fine

  -I don't want to just fall to half way through the application of patches.

  So you should know at this time and before applying the patch merged, it will fail in the fusion process.

  Also, if I use the merge, options usable with adpatch follows? options adpatch = nocompiledb, nomaintainmrc

  Yes you can, a merged patch is like any other patch that can be applied using adpatch - AD Options from command line for the version R12 (Doc ID 1078973.1)

  Thank you

  Hussein

• Install RAC 11 GR 2 and apply the patches with the new Option of software updates YES

  Anyone tried the installation with the new Option of software updates?
  
  I'm going to install grid RAC 11 GR 2 and I intend to do the following steps:
  (1) install the Oracle Grid Infrastructure 11.2.0.2 patch group
  (2) make all configurations with YES
  (3) create ASM disks
  (4) install Oracle Database 11.2.0.2 software only
  (5) apply recommended patches 11.2.0.2.2 Oracle (12311357) and 12431716. (Ref. MOS doc [756671.1 ID])
  (6) create the RAC (advanced option) with DBCA database
  
  With these steps:
  Grid and ASM disks would be configured without the recommended patches, but the database will be created with applied patches.
  
  I would not do a "Software only" install IM and then apply the patches because later I would have to manually do all the configuration steps.
  
  If I use the Option of YES software updates to apply patches, YES makes the adjustment, and then I would set up the GRID with YES?
  
  Quote from Oracle® Setup Guide Network Infrastructure 11 g Release 2 (11.2) for Linux - E17212 number of part-11:
  'Use the feature of dynamic download and apply software upgrades of software updates as part of the installation of the Oracle database. You can also download updates separately using the downloadUpdates option and later to apply during installation by providing the location where updates. »
  
  I could not find more detailed information on this feature in the documentation and MOS.
  
  Thank you

  Hello

  You can download the latest updates and patches to help with option - downloadUpdates

  ./runInstaller -downloadUpdates
  

  You can use this note:

  * How to download the latest updates and patches using 11.2.0.2 YES [ID 1295074.1] *.

  Don't miss...
  * Error: INS-20704 while installation 11.2.0.2 with Option 'use downloaded software updates' [1265270.1 ID] *.
  : Note ensure that the user download the updates of patches have own/correct permission to download updates to patch to MOS (My Oracle Support).
  Do not use the directories/tmp/oraInstall * for the download location. New bug 9975999

  Documentation explaining...
  4.5.1 running Oracle Universal Installer
  Download of updates before Installation
  http://download.Oracle.com/docs/CD/E11882_01/install.112/e16763/inst_task.htm#BABJGGJH

  Kind regards
  Levi Pereira